51000 MINI KEYBOARD USER'S MANUAL
Contents
1. i When NUM LOCK is NUM LOCK Enable the embedded numeric keypad Lights the NUM LOCK LED indicator NUM LOCK Disable the embedded numeric keypad Turns off the NUM LOCK LED indicator ae Temporarily enable the main keyboard FN SHIFT Temporarily enable uppercase function ofthe 1 main keyboard i OFF FN SHIFT Temporarily enable the embedded numeric keypad Press and hold the key s during operation When the key is released the operation reverts to the original keyboard status KEYBOARD CABLE CONNECTOR PC AT Compatible Cable 5 pin Din Connector Pin Signal Name Voltage 1 Keyboard Clock 5VDC Signal 2 Ground 0 3 Keyboard Data 5VDC Signai 4 Power Supply 5VDC 5 No Connection PS 2 Compatible Cable i 6 pin Miniatures Din Connector Pin Signal Name Voltage 1 Keyboard Clock _ 5VDC Signal 2 Ground 0 3 Keyboard Data 5VDC Signal 4 Reserved 0 5 5VDC 5VDC 6 Reserved 0 TECHNICAL DATA POWER REQUIREMENT 5 VDC 240 mA nominal ENVIRONMENTAL DATA Operating temperature 0 C to 55 C Relative humidity 20 to 95 non condensing Altitude 1 1000 ft to 10000 ft MECHANICAL DATA Total Travel 3 8 0 2 mm Pretravel 0 9 0 2 mm Operating Life 10 mega cycles min per key Peak Load before Make normal key 55 8 grams Length 297 mm Width gt 452 mm Height 30mm Weight 0 7 kg i i a a tla FEDERAL COMMUNICATION COMMISSION GUIDELINES Warmi2. 5100C MINI KEYBOARD USER S MANUAL Feb 17 1997 Version 1 00 This keyboard is an 80 81 key mini keyboard It features e IBM AT and PS 2 101 102 keys enhanced keyboard compatible The XT function is per order request e 12 function keys e Separate SCROLL LOCK NUM LOCK and CAPS LOCK LED indicators 5 e Embedded numeric keypad with cursor and screen control capabilities e Special FN key for accessing the cursor and screen control keys F11 and F12 key functions and embedded numeric keypad IBM XT AT and PS 2 are registered trademarks of International Business Machines Corporation KEYBOARD LAYOUT U S English Black Keycaps RO manie ma da ns IS aaa Cy DO LIS Il aL a U S English ivory Keycaps FN Key The FN key is used with the cursor control keys the F1 and F2 keys and the embedded numeric keypad to provide several functions The following sections will give you more usages about this key Note The FN key is active only when itis being pressed As soon as it is released it becomes inactive Cursor Control Keys The cursor controi keys move the cursor one space or line at a time Directional arrows on the keys indicate which way the cursor moves up down left or right The keys are illustrated below VOL When the cursor control keys are used with the FN key they become screen control keys The screen control keys PgUp PgDn Home End are defi
3. ned by the application and typically move the cursor a iii up or down to the beginning or end ofa screen orto the beginning or end of a line To enable the screen control keys press and hold the FN key when pressing the key for the desired screen control function The key combinations are illustrated below SU ipar Lia bad T Jf e J F11 and F12 Key Functions To enable the F11 function press and hold the FN key when pressing the F1 key To enable the F12 function press and hold the FN key when pressing the F2 key The key combinations are illustrated below eJ e x a Embedded Numeric Keypad The embedded numeric keypad consists of 16 keys GH Epoa aaga TODO The embedded keypad functions in three ways e As a numeric keypad e Asapart of the main keyboard Accessing the Embedded Numeric Keypad Functions The embedded numeric keypad and related functions are accessed in two ways 1 With the NUM LOCK toggle key which activates the numeric keypad When the NUM LOCK key is on the NUM LOCK LED indicator is lit 2 With the FN and SHIFT keys which are used in conjunction with the NUM LOCK key to provide related functions The use of these keys as shown in the following chart depends on if the embedded numeric keypad is enabled NUM LOCK function on or disabled aang LOCK function off Accessing Embedded Numeric Keypad Functions
4. ng This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Information to User Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment 3100502876 JT Printed in China
Download Pdf Manuals
Related Search