User Manual A-DATA XPG 3.5” SSD Enclosure 2.5” To 3.5” Hard
Contents
1. Manual Notice 1 Hot plug function depends on your PC system Generally internal SATA device does not support hot plug function Some e SATA devices support but also depend on the motherboard driver If you are not clear that your PC system supports or not please do not change your SSD or HDD as the PC is working Or your PC may hang up or damage your storage device 2 During file saving please do not disconnect the storage device even if your PC supports hot plug Disclaimer All the information in this document is subject to change without prior notice The manufacturer makes no representations or any warranties regarding the Contents of this manual The information contained in this manual is provided for the general use by the customers No part of this document may be reproduced or transmitted in any form by any means without the express written permission of the manufacturer All brand names and product names used in this document are trademarks or registered trademarks of their respective holders V090420 _92. User Manual User Manual A DATA XPG 3 5 SSD Enclosure 2 5 To 3 5 Hard Drive Converter Description This 3 5 enclosure is for the use of two 2 5 SATA SSD or hard disks mounted on one mini 3 5 form factor drive cage Features Interface SATA I II LED indication for Working and Failure The dimensions match exactly as a standard 3 5 bay Energy saving on using 2 5 SSD or HDD Forthe use on desktop server case rack mount chassis that is with 3 5 form factor space Complies with SATA I SATA II interface Maximum transfer rate up to 1 5Gbps for SATA I and 3 0Gbps for SATA II SSD Auto Eject when you open the front cover Aluminum material best heat sink Dimension 148 2 x 101 7 x 25 8mm L W H Weight 0 23 kg V090420 1 User Manual Accessory List 1 3 5 Enclosure 1 2 User Manual 1 3 7 pin SATA Cable 2 4 Screws Bag 1 With 4 screws Front Panel Picture A Ke A6 A2 A7 A3 A8 1 SSD HDD 0 Access LED Green working A2 Power LED Green Power is on A3 SSD HDD 1 Access LED Green working A4 A5 A6 Upper cover amp SSD HDD extractor Lower cover amp SSD HDD extractor Upper SSD HDD Safety Lock Push rightward to open amp push leftward to lock V090420 Sy User Manual A7 Push the rise high position to open the upper amp lower cover A8 Lower SSD HDD Saf
3. ety Lock Push rightward to open amp push leftward to lock Rear Panel POWER SATA O0 B1 B2 B3 Picture B B1 SATA 15pin power connector B2 SATA 7pin data connector for SSD HDD 0 B3 SATA 7pin data connector for SSD HDD 1 Safety Lock Upper SSD HDD Safety Lock amp Lower SSD HDD Safety Lock Push rightward to open amp push leftward to lock See Picture C LOCK Picture C V090420 3 User Manual SSD HDD Installing Open the upper amp lower cover and put the SSD HDD into the cage You can install one SSD HDD or two SSDs HDDs Picture D V090420 _4 User Manual Hardware Installation Procedures Please follow below procedures to complete the hardware installation 1 Open the package take out the product make sure the product is brand new and all the necessary parts are included Please check with Accessory List If damage or shortage occurred please contact your distributor or where you bought 2 Unlock the upper and lower covers see picture C push the lock rightward and open the two covers and then put the two 2 5 SATA SSD HDD into the box See Picture D 3 After both SSDs HDDs installed push both covers back like picture C and then push the lock button leftward to lock both covers to secure the SSDs HDDs inside properly 4 Then mount the 3 5 enclosure on the 3 5
4. space using the included screws to mount it on the device desktop case etc and make all the cable connected properly and it is ready for use 5 See the drawing of the two ways to mount the 3 5 enclosure on the Device See Picture E V090420 sgi User Manual Screw positions to mount like a floppy drive Screw position to mount like a 3 5 hard drive Picture E 6 There are 2 ways to mount the 3 5 enclosure on the device Picture F 1 Mount it on the floppy drive bay Picture F 2 Mount it inside the case 7 Connect the 3 5 enclosure with PC via 15pin SATA power cable from Power Supply and 7pin SATA cable using included cables See Picture F 3 090420 6 User Manual Picture F 2 Picture F 1 15Pin Power cable Pin SATA cable Picture F 3 090420 User Manual Trouble Shooting A Why can t open the panel cover Please check the Safety Lock is at UNLOCK position B Can install or uninstall the Hard Drive anytime We suggest you to turn off PC before your installation C Why can t see the Hard Drive in My Computer after installed Please check the LED status If the LED is green it means SSD HDD is accessed Then Please check if the SSD HDD is formatted or not D Can install SSD 1 and HDD 1 and work well Yes itll work fine and the performance is depended on the SSD HDD that you installed V090420 _8 User
Download Pdf Manuals
Related Search