OWNERS MANUAL - Big Aussie Deals
Contents
1. Advice Learn from local professional institution or the retailer Operating and driving way in the first or second weeks may affect the vehicle future performance Please pay more attention During this period do not turn the throttle into maximum should alter the speed often After training period maintain the vehicle according to maintenance form strictly Keep the vehicle in good condition Training is necessary Improper operation will result in the vehicle and result in serious injuries and death lf the driver is without the safety awareness or driving experiences please drive it under the supervision of the adults Riding Before driving please review the safety driving way and Its importance 1 Pay attention to the brakes working condition always 2 Driving with only one hand is dangerous and forbidden 3 Turn the throttle slowly Never turn it suddenly 4 Release the throttle and use the brake to make it slow down 5 Make sure both the front brake and the rear brake work at the same time when braking Never force too hard that will reduce the working life of the brakes 6 Do not make dangerous movement while driving to ensure safety Parking 1 Turn back the throttle and brake at the same time 2 Turn the key to OFF position when the vehicle stops then take out the key 3 Parking function is recommended at this moment to avoid sliding Cleaning After every riding the driver should clean the vehicle2. Please install bumper and accessories and tighten nuts with force between 15N m 25N m Connect battery cables When you connect battery cables electric lock is in the sate of OFF Positive first then negative Disassembly is opposite If you fail to understand the instruction please contact with the local retailers and get professional confirmation after installation Loading Adjustment This step should be checked regularly to ensure safety and convenience Check the toe in of front tire make sure the front center distance is 5 10mm shorter than the rear center distance overhead view of front tires rear center distance the center line bf vehicle left tire 4A A right tire front center distance Make sure the connection is ON and no part is OFF So vehicle can be started at anytime Adjust the Chain Use the index finger to press lightly the middle position between power output sprocket and rear sprocket The best condition should be pressed 15mm to 20mm If it is not in this range please adjust the chain adjuster Please note The chain adjuster should be adjusted at the same time to ensure the balance of both side To loosen the fasten nuts of chain adjuster first and then unscrew or screw nuts to be best condition Finally make the nuts of chain adjuster screwed To loose the nuts if the adjusted range is large 4 Qe AR E Ko A Q Nag N gt fixing nut SS NU A thain adjus
3. Then place it on flat ground to clean and then check 1 High pressure air or water will harm the vehicle 2 Do not splash water on these parts key switch cables and battery 3 Generally to wash the vehicle with clean water 4 Do not turn on the key switch immediately after cleaning 5 Chain should be daubed with lubricating grease Storage The quality will be influenced if you do not use vehicle for a long time Before storage vehicle must be checked to ensure it is in a good condition 1 Check the weight of vehicle from the parameter list 2 Clean up the vehicle and then wax its surface 3 Turn off the key switch 4 Clean the chain and then lubricate it 5 Lubricate all the cable parts 6 Place the vehicle well packed in a cool ventilated place to avoid damp and sun exposure Transport This is a process of transport the well packed vehicle 1 Check the weight of vehicle from the parameter list 2 Ensure the package well protects the vehicle 3 Ensure the vehicle is well fixed on the trailer or forklift 4 Handling with care Delivery This is the process of delivery the well packed vehicle 1 Check the weight of vehicle from the parameter list 2 Ensure the vehicle is placed normally Do not turn it upside down or side lay it 3 Ensure the vehicle is well fixed on the trailer or forklift 4 Handling with care Maintenance Unprofessional person may not understand the large information of this pa
4. E IMPEDANCE TYPE ne COMPOUND MUFFLER FRONT REAR BRAKE TYPE F DISC BRAKE STARTING MODE PULL START Teen sca FRONT REAR BRAKE OPERATION LY HAND IGNITION MODE NONE TOUCH MODE rn MAGNETIC CONTROL CHAIN DRIVE FRONT REAR TIRE 3 00 4 DRIVE MODE SPECIFICATION FRONT REAR TIRE PRESSURE F 165kpa LUBRICATION MODE PETROL MIXED R 137kpa LUBRICATE FRONT REARRIMTYPE RIM TYPE STEEL COOLING MODE AIR COOLED HEADLIGHT SPECIFICATION E FUEL BRAND gt 90 PRIMARY REDUCTION RATIO MIXTURE RATIO OF 1 25 FUEL amp LUBRICANT OIL FINAL REDUCTION RATIO LWA dB A 78 DRIVE RATIO 15 71 VIBRATION m s 1 0 CIRCUIT DIAGRAM engine off switch PP e oe Ignition coil j NN 1 j i g I f y y V 4
5. OWNERS MANUAL Original instructions Please read this owner s manual carefully before using this product This is most important Please read this owner s manual carefully Its good for driver s safety and vehicle s maintenance If the rider is without safety awareness or driving experiences please do drive under the adult s supervision This is most important It s very important for your safety This product is recommended for riders of 14 years old or over Do not lend the vehicle to others who don t know how to operate Please observe the local law and regulations Content Safety warning compliance with the law Assembling The position of the VIN Key switch Function switch Charger Emergency turn off stop switch Burglar Alarm Tire and Tire pressure gauges Operating Inspection before riding P Idling inspection Front rear suspension inspection Front brake system inspection Rear brake system inspection Battery inspection Tool bag inspection Self Protection inspection Starting Training Riding Parking Cleaning Storage Transport Delivery Maintenance amp accessories Accessory description data circuit diagram age warning and warning labels UU UU U U U U U U U uU U U U U o U TU U U U U U U U U Safety warning This vehicle is not a toy Rider under16 years old must use this product under adult s supervision Children must be trained before driving This is very important B
6. ck if the tire rotation is good after releasing the brake lever 4 Contact the dealer for the need of brake maintenance 5 The front brake lever is with parking feature as well Use it when parking Rear brake inspection Check whether the rear brake installation is firm the braking effect is valid 1 The rear brake is mounted on the left hand or on the right foot 2 The brake is working well if backward movement of the brake handle is in the top 20 30mm or downward movement of the top of the foot brake lever 20 30mm 3 Put the brake lever or foot brake lever back into place quickly and check if the tire rotation is good when the force is removed 4 Contact the dealer for the need of brake maintenance 5 Inspect the brake shoe regularly and replace if timely when it is worn out as the brake shoe is a worn pieces of block 6 Do not open the brake casually as the brake fluid will damage people s skin Clean the skin with water of go to the doctor when it happens 7 The rear brake lever is with parking feature as well Use it when parking Battery check if available The battery of this vehicle is maintenance free 1 Check whether battery joint is tight If there is some part broken please change it 2 Do not throw off the battery which resulting in environment pollution 3 Do not charge the battery until it is out of power 4 When the vehicle placed for extended period of inactivity check the electric quantity every 3 wee
7. e standard pressure can cause a flat tire Lower than the standard pressure can cause tire relaxation or even dropping and resulting in losing control of the vehicle 3 When the tire tread wearing is over 2mm please replace new tire in time Please seek assistance from qualified technician or local retailer for replacement Tire gauge optional Manufacturer will provide to customers to measure tie pressure Tire gauge is put on the key ring of the key switch for users convenience Measure method Unscrew valve cap then press it toward the valve cap with tire gauge The measured value is tie pressure Put back the valve cap and screw it after measuring Operating Inspection before riding Idling inspection 1 Stabilize the vehicle shake it up and down to inspect the swing arm and fork condition to make sure it move normally and without interference 2 Check whether the front and rear the shock absorber is deformed or leakage or not 3 Check whether the front suspension and the rear flat fork is fastened in place 4 Hold the vehicle when checking 5 Repair and replace parts in time when finding that negative phenomena 6 Contact with the dealer when the situation is out of control Front brake inspection Check whether the front brake installation is firm the braking effect is valid 1 Front brake handle is mounted on the right side 2 The brake is working well if backward movement of the brake handle is in the top 20 30mm 3 Che
8. e sure of children s ability to forbid the risk This is very important Children must understand the manual and the importance of warnings on the manual User must read the owner manual carefully and understand the content of the manual Incorrect operation of this ATV will result serious injury or even death Age limit warning See aluminum warning plate on the ATV This product is not intended for OFF ROAD use Please get off the vehicle and walk with it when crossing the roads 10 Never ride with more than one person 11 Never attempt to operate this vehicle while under the influence of alcohol or drugs avoid injury or death 12 Please control the speed do not drive at excessive speed 13 The vehicle is not allowed to use in the adjustment or maintenance period 14 Be sure the vehicle is in a good condition before using it 15 Do not modify the vehicles or change the spare parts This is unsafe and illegal 16 The accelerating installation of the vehicle has been set Users should not adjust it which may result in serious injuries and death 17 Before riding please wear the safety helmet gloves protection dress and footwear to ensure the Safety 18 It is necessary to receive training from importer or retailer and learn the operation skills 19 Learn local laws and regulations of ATV driving from the retailers 20 It s easy to be burned by break after using the vehicle for a long time 21 Although the v
9. ehicle is with safety designed measures harms still can not be avoided O ON OOF WN Please read the warning labels on the vehicle carefully and understand them fully 1 Warning caution label includes important safety information 2 User must understand the content of labels completely and carry out 3 Make sure all the labels are put on the vehicles already 4 When finding the labels are not clear or fall off please ask dealers for them to stick on the vehicles to ensure the integrity of all the labels Compliance with the laws and directives 2006 42 EC MACHINERY DIRECTIVE 2004 108 EC EMC DIRECTIVE 97 68 EC ENGINE POLLUTANT DIRECTIVE Assembling guide 1 Place packing box on the flat ground then open it with the scissors or cutter 2 Use 10 open end wrench and 6 allen wrench to apart the packing metal 1 step Please install steering linkages tighten nut with 25N m force and adjust the balance of the left and the right 2 d step Please install rear shock absorbers and tighten nuts on both sides with 25N m force 3 step Please install the front tires make the tread pattern and cycle valve outside and tighten nuts with force between 35N m 45N m 4 step Please install the rear tires make the tread pattern and cycle valve outside and tighten nuts with force between 50N m 60N m 5 step Please install handlebar adjust to proper angles and tighten nuts with force between 15N m 25N m 6 step
10. ks Charge it when below 12V 5 When charging using or placing the battery do not put it upside down Tool bag inspection Check whether tool bag is taken every time before riding The tool bag is equipped with some professional tools You can use time when in need Self protection inspection Self protection inspection is the guarantee of pleased driving and life safety Please wear the protective clothing correctly to ensure your safety Protective clothing consists of these parts below Every check and inspection step above is necessary there is danger existing when driving Please conform the above process before driving and operate in accordance with the standard strictly when driving will protect your and life safety The warning sticker put on the surface of vehicle includes important safety information User must comprehend fully and act strictly It will cause the extreme injure and even death if not carefully checking or executing Starting Following the steps below to start the engine 1 Park the vehicle on the flat ground 2 Turn on the key switch to NO position Make sure it s well connected 3 If the engine doesn t start please open the choke valve first Try again Close the choke valve when the engine steady runs 3 At the beginning turn the throttle slowly Training Unprofessional person may not understand the large information of this part So Training will not explain in details
11. ondition 2 Keyless function Don t need to turn on the key switch Press the start button twice continuously and then operate the vehicle 3 Telecontrol stop function With the keyless function used first press the button of unlock within the certain distance of remote control the power of vehicle will be turn off Please note This function is ineffective if vehicle is to be turned by key switch Emergency turn off stop switch It s put in the left side of the rear frame or on the left handlebar Pull or press down the switch the engine will be stopped The emergency rope can be fastened on the driver when there is emergency the vehicle will be stopped automatically by the driver getting off the seats and pulling down the rope Tire and Tire gauge Tire The proper tire pressure can provide the maximum stability and comfortableness Do check and adjust the tire pressure regularly to make sure the pressure to be on the standard grade To find the tire size and standard pressure please check parameter list and warning label on the vehicle To find the Load bearing and speed grade please check the tire surface 1 Check tire pressure and condition before driving Please make the replacement if there is any following condition happened broken stabbing or rim is out of shape Please seek assistance from qualified technician or local retailer for replacement 2 Improper tire pressure will result in hazards Over th
12. perate this ATV ini e Over loading can adversely affect vehicle han dling injury OF death e Operator use only Passengers prohibited 3 Cold tire pressure eThi hicle is designed and factured f OFF ROAD use only O ARa 70 Front 7 0 5 psi 48 3 5 kPa e Operation on public streets roads or highways is illegal Rear a 7 0 5 psi 4813 5 kPa e Always wear a helmet and other protective equipment r PURO e Do not operate this vehicle after consuming Alco hol e Maximum weight capacity 200lbs 90kg or Drags e Gasoline is flammable shut off engine avoid sparks and open flame when refueling e Read owner s manual carefully before riding NWARNING A WARNING Please use leadless petrol two cycle lubricant mixture ratio 25 1 Stop the engine when filling gasoline avoid the fire and explode Please use gt 90 leadless gasoline Stop the engine when filling gasoline avoid the fire and explode CE plate Emergency turn off switch Warning plate PRODUCT MODEL POSO AXLE BASE mm 700 BORExSTROKES 44X37 4 WHEEL BASE mm paa DISPLACEMENT ml yop 100 COMPRESSION RATE 8 1 TURNING CIRCLE DIAMETER UNLOADING AND nan mm ROTATE SPEED r min r min THE WEIGHT OF FULL MAXIMUM TORQUE FURNISHMENT Kg N m r min 2 4 5500 RATED LOAD QUALITY kg CARBURETOR TYPE H117AFLOAT CENTRIFUGAL OILTANK CAPACITY L 08 SPARKPLUGTYPE BM6A FRONT REAR SHOCK ABSORBER o LG MUFFLER TYP
13. rt So Training will not explain in details For more details olease contact local retailer Necessary maintenance is the important guarantee to keep the vehicle in good condition Please maintain the vehicle according to time list Engine maintenance After every driving please close the switch of carburetor and oil way Release the rest oil This is very important If not do it accordingly the vehicle will not be easily started after it has been placed for a long time or carburetor will leak Maintenance time list Please do operate strictly according to maintenance list I Inspection Maintenance or lubricant replacement C Cleaning L Add lubricant Firstweek 30days after driving Eachyear Fuel System Throtte BE G S Air filter O EXIT G l carburetor BE CA Brakepads brake system Nuts and bots o o S D O Steeringsystem suspension system Battery if available The position of spare parts parameter Electrical diagram age warning and other warning labels and plates Improper ATV use can result in OFF ROAD USE ONLY SEVERE INJURY or DEATH ARES ALWAYS USE NEVER USE NEVERCARRY NEVER USE AN APPROVED ON PUBLIC PASSENGERS WITH DRUGS HELMET AND ROADS OR AL COHOL FHOTEGIINE Improper tire pressure or overloading can cause loss of control Never permit over allowed speed e An adult supervision required always Loss of control can result in severe e Never permit children under age 14 to o
14. ter SS KO bal PU adjusting nut a Pg y The position of the VIN The VIN is on the right side of the front frame VIN number Key switch Key switch is on the right side of the vehicle front part indicating OFF and NO OFF condition Key can be taken out Light can not be turned on if light available engine can not be started ON condition Key can not be taken out When engine is being started headlight can be turned on if headlight available Function Switch Functional switch is in left side of handlebar which consists of horn start headlight flame out function 1 Electric horn button Po When key switch is on press it then it rings 2 stroke pull start engine have not equipped electric horn as the product construction But manual horn should be assembled according to customers needs 2 Start horn button Red E press it to start the vehicle when brake hand is ready a a 3 Headlight button 4 near light distance light en A Turn off switch PI turn ol Drum on Charger optional 1 The input voltage is 220V or 110V the same as voltage in local place and output voltage is12V 2 When the vehicle is charging the indicator light turns to be red When the vehicle is fully charged the indicator light turns to be green Burglar alarm optional 1 The input voltage is 12V Anti theft function Press the lock key vehicle is in alerting c
Download Pdf Manuals
Related Search