User guide - Stop Sleep
Contents
1. Loud Beep Vibration Vibration Your concentration has dropped slightly Your concentration and awareness have dropped significantly even though you may not necessarily have noticed Take a break Please Note StopSleep can alert even when you are not feeling obviously tired or drowsy This could be due to a number of reasons Your level of attention or concentration can drop imperceptibly without you necessarily noticing If your brain activity remains constant for a long time StopSleep might alert you to check your reaction time on a long drive for example A big change in temperature can also trigger an alert due to the sweat from your skin suddenly changing Turning Off and charging Turn StopSleep off by pressing the on off button for 3 seconds The LED will flash green followed by a deep tone Connect either the home or vehicle charger supplied with StopSleep to the micro USB socket on the side of the unit The LED will flash red every 5 seconds to confirm that it is charging correctly The LED will turn from red to green once the battery is fully charged Please note StopSleep must be switched off when charging If you attempt to charge StopSleep whilst powered on it will beep every 2 minutes If the battery has been completely discharged it is advisable to re charge it using the AC adaptor If the battery has been completely discharged it could take up to 15 minutes before you see the red LED begin t2. FREQUENTLY ASKED QUESTIONS and technical support You will also find information on the return policy and procedure should you encounter a problem with StopSleep Explanation of flashes and alerts ENGLISH CAPTION Green LED 2 Beep Vibration Red LED A Melody SWITCHING ON Press the ON OFF button for 3 seconds 0 Start Over 50 battery charge left os Over 25 battery charge left dod About 2 hours of battery time left d d About 1 hour of battery time left DIII Battery nearly flat recharge before use 1 IN USE 3sec 1min O Everything is ok SWITCHING OFF Press the ON OFF button for 3 seconds Device switched off O 2sec 2min PPL Skin not detected device removed 5 a 0 ALERTES CHARGING STOPSLEEP StopSleep must be switched off while charging o WARNING Your concentration has started to drop 5sc Charging Oo O DANGER Your attention has dropped significant A O PP 9 y 5s Charging completed o Low battery the device will need charging soon esd Very low battery Not If the battery has been completely discharged it is advisable to re charge it using the AC adaptor If the esid Battery flat device will switch off battery has been completely discharged it could take up to 15 minutes before you see the red LED begin to flash indicating that it is charging correctly ST
3. G 8 SKIN SENSORS Switching StopSleep on To switch the StopSleep on press the ON OFF button for 3 seconds The unit will beep and flash green A succession of sharp beeps will follow depending on the battery level Battery charge level when switching the device on No beeps Battery fully charged 1 Beep Over 50 battery charge left 2 Beeps Over 25 battery charge left 3 Beeps About 2 hours of battery time left 4 Beeps About 1 hour of battery time left 5 Beeps Battery nearly flat recharge before use Check that the battery is fully charged and put StopSleep on any two fingers of either your right or left hand Whilst the StopSleep skin sensors are establishing contact with your skin the LED will flash green every 3 seconds Once contact has been completely established the LED will then flash green once every minute You can check that the unit is on at any time by briefly pressing the on off button The LED will flash green to confirm that it is powered on and has sufficient charge or will flash red if the battery is nearly flat and needs recharging If you remove StopSleep at any time the device will beep every 2 minutes This indicates that it has lost contact with your skin and is no longer monitoring your electrodermal activity and providing any protection ENGLISH Understanding StopSleep alarms f your brain activity drops under a certain level StopSleep will alert you DANGER WARNING
4. OPSLE P StopSleep com au or StopSleep co nz
5. STOPSLE P User guide STOPSLE P Understanding StopSleep ANTI SLEEP ALARM StopSleep is a two finger ring with 8 built in cutaneous sensors which continually measure your skin s conductance and electrodermal activity This electrodermal activity represents your brain activity and as soon as your concentration and awareness starts to drop StopSleep will alert you immediately Congratulations on purchasing StopSleep the most effective Anti sleep alarm on the market Get the most out of StopSleep by taking a few minutes to read this guide ENGLISH Microsleep Sleep An example of Electrodermal activity as user moves from an active state to microsleep and then sleep First time use To familiarize yourself with the StopSleep alerts we advise you to test it in an non dangerous environment such as at home at night watching television or even going to bed This will allow you to differentiate between the two types of alerts WARNING and DANGER We guarantee you will be very quickly convinced of how amazingly effective StopSleep is Battery charge level and charging From time to time it is recommended to fully charge discharge the battery This will improve the performance and the longevity of the battery like any other Lithium battery powered device StopSleep can be charged by its micro USB connection AUDIBLE ALARM VIBRATION ALARM ON OFF SWITCH MICRO USB CHARGER STATUS LED DOUBLE RIN
6. o flash indicating that it is charging correctly User Recommendations StopSleep has been designed to alert in case of drowsiness and drops in concentration and awareness StopSleep should not be used as substitute for driving with due care and attention The user is responsible for paying full attention to road conditions and under no circumstances should StopSleep be used to attempt to keep the user awake when feeling over tired or too tired to drive safely When driving always take regular breaks and always take a break at the first signs of fatigue or a drop in concentration If StopSleep alerts stop driving immediately ENGLISH Online registration and warranty StopSleep s algorithm could be subject to change It is strongly recommended to register the unit online at www stopsleep com au or www stopsleep co nz in the PRODUCT REGISTRATION section in order to be kept informed of any changes and update your device if necessary StopSleep comes with a one year warranty The warranty applies to a fair use of the StopSleep device Problems arising from lack of care or misuse falls humidity water exposure tampering etc would void the warranty It is strongly recommended to keep it in its carry case when not use Technical support and After Sales Service If you have any further question on how to use StopSleep please visit www stopsleep com au or www stopsleep co nz where you will find more detailed product information
Download Pdf Manuals
Related Search