1183 WOODEN KITCHEN SCALE OPERATING INSTRUCTIONS
Contents
1. Battery Warning BATTERY WARNING INTERNAL BURNS CHOKING HAZARD Swallowing batteries may lead to serious injury or death severe burns can occur within 2 hours IMMEDIATELY SEE A DOCTOR Emergency Telephone Numbers AUSTRALIA 000 NEW ZEALAND 111 Poisons Information Centre AUSTRALIA 13 1126 NEW ZEALAND 0800 764 766 KEEP BATTERIES OUT OF REACH OF CHILDREN Dispose of batteries immediately and responsibly e Non rechargeable batteries are not to be recharged e Only batteries of the same or equivalent type are to be used polarity e Remove exhausted batteries from the product e Remove batteries from the battery compartment when not in use Made in China for Propert Housewares A division of SF SUPERTEX INDUSTRIES PTY LTD a wholly owned Australian company ABN 85 003 833 029 KITCHEN SCALE with Clock and Timer e Never throw batteries in a fire or attempt to open up their outer casing For further information website www supertex com du Email customerservice supertex com au Telephone 02 8756 3000 Facsimile 02 9748 6622 A signatory to the Australian Packaging Covenant A amp PLEASE DO NOT RECYCLABLE LITTER PAPER Model 1183 N2853 Operating Instructions e Batteries are to be inserted with the correct Ins2. e scale automatically returns to the clock display Otherwise press MODE to do this Overloading When the scale is overloaded 3000g 105 80z the display will read Err Remove the weight immediately or damage to the scale may occur Low battery indicator The low battery symbol will appear on the readout indicat ing the battery needs to be replaced Always use a good quality fresh Lithium battery Caring for your Scale The glass platform may be detached for easy cleaning Clean the scale with a damp cloth using a mild detergent or non abrasive household cleaner but do not allow water to get inside the scale Wipe dry with a soft cloth Remove the battery if the scale is not being used for a long period of time Specifications Model 1183 Weighs in grams g or ounces oz Capacity 3 000g 3kg or 105 80z 6lb 60z Graduation 1g or 0 10z Uses Strain Gauge technology which is an electrical resistance or strain measured by a steel bar within the scale being depressed by the weight of the food on the scale This strain is then converted to a digital weight readout Solid natural wood base 4mm thick tempered safety glass 140mm Diameter Overload indicator Err Low battery indicator Tare Function Clock Electronic countdown timer with alarm
3. ined weight of the items must not exceed the capac ity of the scale which is 3000g 105 80z The total weight of the items on the scale including the container or bowl if using one can be obtained by press ing the ON TARE button again Then remove all items from the scale The total weight will be displayed as a minus figure Time setting 1 The LCD liquid crystal display defaults to the clock 2 To reset the time press and hold MODE for a few seconds till the minute sector flashes 3 Then press and hold UNIT till the required minute setting is reached 4 Press and hold MODE again till the hour sector flashes 5 Then press and hold UNIT till the correct hour digit is reached 6 When this is done press MODE once again The LCD will display the new time Countdown timer setting 1 To set the countdown timer press MODE once 2 You are now in countdown setting mode 3 Press and hold MODE again till the seconds sector flashes 4 Then press and hold UNIT to select the number of seconds required 5 When this is done press MODE once again till the minute sector flashes 6 Then press and hold UNIT to select the number of minutes required 7 When this is done press MODE to commence the countdown 8 The alarm sounds off when countdown reaches zero 9 Press MODE to stop the alarm 10 If left idle for 60 seconds th
4. tructions for use Remove all packaging before first using the scale Note The insulator tab found underneath the battery in the battery compartment must first be removed for the scale to function Weighing 1 Place the scale on a hard level surface If you intend using a bowl place it on the platform first before entering weighing mode 2 Press the ON TARE button to enter weighing mode The scale displays HELO then 0 appears immediately after The scale is ready for weighing 3 The scale displays in grams g or ounces 0z To change the unit measure press UNIT 4 Put the item to be weighed in the bowl or on the platform the weight will appear on the display 5 Ifno further weighing is carried out within the next 30 seconds the scale automatically returns to the clock display Otherwise press MODE to do this To use the Tare function This scale allows the separate weighing of items as each item is added to the scale No need to empty your bowl After weighing the first item press the ON TARE button again to reset the display to zero The word TARE will appear in the bottom left corner of the display which indicates that the Tare Function is operating With the first item still on the platform or in a bowl or container add the second item The readout will now show the weight of the second item only Repeat these steps if you have additional items to weigh The total comb
Download Pdf Manuals
Related Search