ICM SYSTEM OPERATING INSTRUCTIONS Gyross P/L Date: 31
Contents
1. ICM SYSTEM OPERATING INSTRUCTIONS Gyross P L Date 31 October 2008 ill SALOON DRIVER ON OFF 00 88 TALK LH reg RH INTERCOM Gyross ICM2 11 Turn on bus ignition ICM LH and RH green LEDs will be illuminated Note Will also power up for approximately 7 minutes when any switch TALK LH and RH is operated 1 PA Operation Press TALK switch down and hold driver can now talk to Saloon with driver MA6 microphone Or Press TALK switch up ON OFF momentarily driver can talk to saloon cancel this operation by pressing TALK switch up or down Adjust volume with SALOON knob 2 INTERCOM Operation Passengers can talk to the driver by pressing ST1 station buttons LH or RH LED will flash to indicate which channel is talking Adjust driver s volume with DRIVER knob Driver can talk to LH or RH ST1 stations by pressing down LH or RH switches Note Whilst driver is talking passenger will not be able to talk via ST1 to driver If Passenger is annoying the Driver push LH or RH up to ON OFF LED will go out and when the annoying passenger presses the ST1 button ICM will just beep once and LED will flash A beep can only occur now when the button is pressed after 5 minutes has elapsed Normal operation is restored when a Driver talks on that channel LH or RH b Ignition is turned off then back on Page 1 of 1 File ICMoperationla odt
Download Pdf Manuals
Related Search