RL-IR100 installation manual.indd
Contents
1. event of any warranty claim please ABN 99 091 281 524 contact us and we will forward it to the manufacturer The manufacturer will then determine the extent of their liability This expressly negates to the extent possible by Australian law any warranty reliance on VCOMM Pty Ltd www resi linx com2. resi Inx Hard Wired IR Range RL IR100 boy VCOMM resi linxm IR KIT INSTALLATION MANUAL A IR LED en IR Emitter outputs poo Control 12V DC input D Target input NY Ni E Power LED rower me a Flat IR e Junction Box Target Deis C oe A IR REPEATERS 12VbC ha INPUT De n Tinin 12V DC 500mA Power Adaptor Double Emitter Hardware Connection 1 Connect IR Emitter to the output on the side of the Junction Box Place the emitter head 10mm to either side of the IR receiver on the Audio Video source depending on environmental conditions Additional IR Emitters RL IR700 RL IR800 can be Target Wiring purchased if required White stripe 12V 4 2 Connect Flat IR Target one connector directly into target input on Junction Box 3 Connect the 12V DC 500mA power pack to the power Frequency Range 20 200kKHz input on the Junction Box Check the green LED Power Input 12V DC 500mA Switch Mode is illuminated Maximum Target reception distance Up to 8 metres 4 Place the target in a position to receive IR commands Target cable length LED indicator on both IR Target and Junction Box illuminate briefly upon receipt of IR command Refer to www resi linx com for further information WARRANTY Vcomm Pty Ltd VComm Pty Ltd states that the warrant that the customer can rely on is that ACN 091 281 524 provided by the manufacturer In the
Download Pdf Manuals
Related Search