Home

GSM REMOTE CAMERA User Manual - Sunsky

1. For master and family users 103 time 70 The Interval time values should be in the range from 3 10 Each unit constitutes 100ms The default value is 5 i e 0 5 seconds Successful SMS reply Image capture interval has been set to 5 2 Automatic alarm settings aa Description Camera will enter auto alarm mode and send notification messages SMS and or MMS to the previously set numbers or e mail addresses in one of the following two circumstances When motion is detected or When the wireless sensors are triggered The user sends the following edit message via SMS to camera in order to activate the following functions 5 2 1 Warning tone upon alarm triggering For master and family users 130 1 71 Successful SMS reply Audio warning activated Camera will emit a Beep tone upon alarm activation 5 2 2 No warning tone upon alarm Default For master and family users 130 0 72 48 GSM REMOTE CAMERA USER MANUAL Successful SMS reply Audio warning deactivated Camera will not emit any tone upon alarm activation 5 2 3 No SMS notification upon alarm For master and family users 11 0 73 Successful SMS reply SMS notification upon Alarm disabled 5 2 4 SMS notification upon alarm Default e For master and family users 11 1 74 Successful SMS reply SMS notification upon Alarm enabled 5 2 5 No MMS notification upon alarm For master and family user
2. 74 11414 Master upon alarm Default Family No MMS notification Master MMS notification Master upon alarm Default 16 mize Family 61 Family GSM REMOTE CAMERA USER MANUAL Category Function Command User No call notification Master upon alarm Default 77 13 0 Family Call notification upon Master Automatic alarm 78 13 1 Family Alarm No MMS notification Master settings to pre set E mail 79 110 0 Famil address Default y MMS notification to pre set E mail 80 110 1 ee address y The alarm suspension F Master time between two 81 151 Minutes Family alarms Turn off indicator Master Turn on indicator Master Speaker turned ON Master Auto on when light is weak during 31 0 bee image capture y Master Infrared Always OFF 31 2 lights Auto on by the site lightness at the Master following condition 31 1 Family Motion detection on at arming SMS notification upon the power Master SMS supply changing 84 144414 Family notification Default and reply No SMS notification Master upon the power 85 144 0 Family supply changing 62 GSM REMOTE CAMERA USER MANUAL Appendix 2 Main Technical Parameters Power adaptor Input 100V 240V AC 50 60HZ Output 5 5 5V DC 1 2A Work temperature 10 C 45 C Store temperature 20 C 60 C Relative Humidity 10 90 without condensation Work band EGSM900 DSC1800 GSM850 PCS19
3. Loading remote control status Red and Two color lights A Note Slow flash 1 time per second quick flash 2 times per second GSM REMOTE CAMERA USER MANUAL Chapter 2 Installation 2 1 Install the SIM card Push downwards the battery cover fromthe Find the SIM card slot in the middle insert rear of host by loosening the screw take the SIM card with the direction as the mark out the battery and then place back the battery and host battery cover 2 2 Host base board application snap fit universal joint ball Base board Figure 3 Base board instruction 13 GSM REMOTE CAMERA USER MANUAL 2 3 Mount the camera Camera can be mounted on a wall or put down on any suitable horizontal surface According to base board installing hole space make holes on the wall with a power drill Insert expanding tube into the drilling hole lock base board on the wall with self drilling screws Fix base board with the host by connecting slot Host can turn around by base board s axle 2 4 Choose the installing place In order to capture better image quality avoid any areas where bright light will be irradiated directly into the lens of the camera on the camera In order to avoid backlighting photography it is suggested that the camera is located at the place where can look down the monitoring place with the minimum angel 30 The GSM network s signal strength may affect the image live voice quality
4. 2 Press any button on the camera w emi a Orange remote control with PN will turn flashing battery inside to senda i green for 2S Added signal to Camera Successfully 3 Repeat step2 to load HENA another new remote control 4 Press the Reset key to Indicator light turns Orange exit the learning mode or green flashing or flashing waiting for 15 seconds to constantly light Exit auto exit learning mode 28 GSM REMOTE CAMERA USER MANUAL amp Note During the process of learning new remote control if the battery of remote control runs out camera will emit three Beep tones and exit learning mode You need to replace the battery and try learning process again 4 5 2 Remote control instruction There are three buttons on the remote control A Arm the camera e When is pressed the indicator light on Camera will turn green This indicates that Camera is in armed mode e Any motion detected by Camera as well as any activation of added wireless detector will trigger the camera alarm and a SMS MMS or phone calling notification will be sent to the preset numbers B G amp D Disarm the camera e When is pressed the indicator light on camera will slowly flash green This indicates that camera is in disarmed mode e Camera will not detect any motion or receive sensor alarm signal C B Emergency button e When is pressed the indicator light on camera will rapidly flash green Then camera will di
5. 3 5 3 Check emergency number Refer to Chapter 4 15 Check status Chapter 4 Basic use and settings 4 1 Network parameter settings 21 GSM REMOTE CAMERA USER MANUAL Authority Master user amp Note In general the user does not need to set the network parameter before use The correct parameters have been set by the manufacturers according to every country s respective GSM provider If the camera is unable to send MMS messages continually the user can attempt to do these settings Description If the camera is unable to send MMS messages continually The GSM provider s MMS parameter must be added onto the camera by using command 14 16 17 for WAP or 15 16 17 for HTTP Method The user sends following SMS message in order to Set sending MMS message via WAP 148 0 14 Successful SMS reply Send MMS using WAP protocol Sending MMS message via HTTP 148 1 15 Successful SMS reply Send MMS using HTTP protocol Set MMS center 124 MMScenter 16 e The MMS center should be the MMS center address of GSM provider For example 124 http mmsc monternet com Successful SMS reply PAR Set APN parameters 125 Gatewayl P WAPGatewayPort HT TPGatewayPort APN APNusername APNpassword 17 For example 125 10 0 0 172 9201 80 cmwap wap wap Successful SMS reply PAR kkkk 4 2 Capture images Authority Master family guest send SMS to the camera to get the MMS image or send the image s to an appointed m
6. Alarm MMS send to 146414 Master Master and Family Alarm MMS send to master Only 146 0 Master Alarm SMS send to 147 1 M ster Master and family Alarm SMS send to 147 0 Master Master Only emergency number Master emergency number Alarm NO dial Alarm dial emergency number No including Master 50H1 Master number English default 57 127 1 Master cowiaras Master 61 07 P Check cneck the present Family status settings and work status of the camera 62 07 password l 63 09 Getting normal Family Getting command list via help SMS 64 09 password GSM REMOTE CAMERA USER MANUAL Category Function Command User 65 09 1 help Getting detailed Family instruction via MMS 66 G est 09 password 1 wen Reset the camera 67 08 passwora Master A 68 32 value Master Value 1 2 3 Default 2 Family A Master 33 quantity i Image quantity 69 33 quantit Family A i Master Image interval 70 103 time Family imade 34 value Master settings Image brightness Value 1 2 3 4 5 Family Image contrast Value 1 2 3 4 5 vonir Default 4 y 35 value value 1 2 3 Master Image orientation 1 Up Down 2 Left _ Right default Warning tone upon 71 130 1 Master alarm triggering N Family No warning tone Master upon alarm Default 72 4130404 Family Automatic aran paai No SMS notification 73 11 0 Master settings upon alarm Family i TAOTI SMS notification
7. E mail address For master and family users 110 1 80 Successful SMS reply Email notification upon alarm enabled If the MMS notifications is set to be send to both a mobile phone number as well as to an e mail address the MMS image will firstly be sent to the mobile phone number and then to the E mail address 50 GSM REMOTE CAMERA USER MANUAL 5 2 11 The alarm suspension time between two alarms Once camera alarms automatically after it finish sending the alarm message it will be at the alarm suspension situation for a period time that is the camera can not be triggered again within a period time The user sends following SMS message to camera in order to set The alarm suspension time between two alarms 151 Minutes 81 The Minutes values should be in the range from 0 10 minute s 0 means no alarm suspension between two alarms Minutes value is default 1 minute Successful SMS reply The time between two alarms is 5 3 Turn on off LED indicator on the camera Authority Master family user Description If the LED indicator is on it will display in different ways to show the working status If it turns off it can make camera private and avoid to be found easily Method The user sends following SMS message in order to Turn off indicator 143 0 82 Turn on indicator 143 1 83 Successful SMS reply Status LED OFF Status LED ON 5 4 SMS notification upon the power supply changing
8. and MMS transmission speed Therefore upon installation the user should ensure that the camera is located in an area with a strong network signal After installation the user should perform a test run by taking several images and sending it to the user s mobile phone This allows the user to check the image quality of the camera The position of the camera can then be adjusted until a satisfactory image quality level is reached GSM REMOTE CAMERA USER MANUAL 2 5 Connect external power Connect the power adapter to an AC power and connect the plug to the power interface of the host mu The camera has a built in rechargeable Lithium battery The camera will notify the user when the power changes For example if the power adapter is disconnected or failure of the AC power occurs the camera will notify the user External power ceased Running on battery m If the camera is again connected to the external power or the AC power is available again the notification will be sent to the user External power resumed a Users can set the camera whether sending SMS message when the power supply changes Refer to 5 4 SMS notification upon the power supply changing 2 6 Power on off Power on A Beep tone will be heard Turn the power Camera switch to up Green light flash slowly or is Position Green light is on constantly disarmed or armed Power off Turn the power switch
9. of Master s attention camera can be set auto disarm when it has been sent out alarms certain times At least one alarm message should be sent via MMS After the user set this function successfully any alarm of camera will be counted in alarm times When the user arms disarms camera manually the counted alarm time will be cleared to 0 4 13 1 Activate auto disarming the camera Authority Master and family users Method The user sends following SMS message in order to Activate auto disarming the camera 138 1 54 Successful SMS reply Disarm the device after several times alarm activated Set the value of alarm times when camera is auto disarming 139 times 55 The times should be numbers Successful SMS reply Disarm the device after times alarm When the alarm times reach to the times value setting camera will be auto disarmed and send SMS message The device has been auto disarmed 4 13 2 Disable the function of auto disarming the camera default Authority Master and family users Method 43 GSM REMOTE CAMERA USER MANUAL The user sends following SMS message in order to Disable the function of auto disarming the camera 138 0 56 Successful SMS reply Disarm the device after several times alarm de activated 4 14 Camera language setting Authority Master user Description Camera supports both English and Spanish or the user s first language display Method The user sends fol
10. on camera will flash red and green alternately for approximately 60 seconds camera will revert back to the preset armed disarmed mode e When the maximum amount of sensors is already loaded if a user attempts to load one more sensor onto the camera camera will send a SMS message Sensor list is full Please delete old sensor at first e Camera will emit Beep Beep tone if the user want to load an existed sensor which has been loaded onto camera 4 10 2 Remove wireless sensor Authority Master and family users Method The user sends following SMS message in order to Remove a wireless sensor 112 SensorDescription SensorDescription 44 e Sensor description should be the existing sensor which the user wants to remove Successful SMS reply All sensors deleted Remove all wireless sensors 112 45 Successful SMS reply All sensors delete 38 GSM REMOTE CAMERA USER MANUAL Enhanced Application of wireless sensor link motion detection At some special situation Only both of wireless sensor and motion detector were actived with 20 seconds the device send motion detection alarm Such case will be avoid the lighting changing or falling leave Small flying insects cause wrong alarm Wireless sensor link motion detector 166 2 SensorDescription 1 46 User can repeat upper command to link more wireless sensor Wireless sensor dislink motion detector 166 2 SensorDescription 0 47 Us
11. should set by start time end time and interval e Workday one digit the values lie in the range of 0 to 9 e The following table contains the descriptions of each value Value Corresponding day 0 Sunday Monday Tuesday Wednesday Thursday Friday Saturday Everyday Monday to Friday 9 Monday to Saturday e Start Time and End Time Be consists of 4 digits hh mm and works on a 24 hour clock For example 0000 means time 00 00 hh mm 2359 means time 23 59 hh mm The Start Time and End Time should be in the same day and the End Time must be later than Start Time e Interval Time This consists of 2 or 3 digits and has values in the WIN OloayjyRl olMms 27 GSM REMOTE CAMERA USER MANUAL range of 10 to 480 minutes Successful SMS reply Periodic sending of images parameter 4 4 3 Disable timing send MMS image Method The user sends following SMS message in order to Disable timing send MMS image 115 0 29 Successful SMS reply Periodic sending of images de activated 4 5 Remote control 4 5 1 Add remote control s to the camera Description When a remote control is added to a camera it can control the camera A camera can be added up to 5 remote controls Method Indicator Operations a Status a Green z 3 flashing or 1 Press and hold the Man S fue constantly Reset key for 2 seconds mode 9 9 light
12. the manual s contents can be view via the user s mobile phone 45 GSM REMOTE CAMERA USER MANUAL Method The user sends following SMS message in order to Getting normal command list via SMS e For master and family users 09 63 e For guest users 09 password 64 Getting detailed instruction via MMS e For master and family users 09 1 65 e For guest users 09 password 1 66 4 17 Resetting the camera Authority Master user Description This function resets all programmed settings to their original values After camera is reset it will need to be restarted The remote control as well as the wireless sensor will also need to be reloaded Refer to chapter 3 2 Define Master user to start the camera e After resetting the camera However if the MMS function does not work the MMS parameter will need to be reset Refer to chapter 4 1 Network parameter settings amp Note This function needs to be used carefully as it also erases the values for the master number the remote control as well as the wireless sensor s Method Method 1 Reset via the camera Switch camera off It must remain off for a minimum of 20 seconds Press and hold the Reset button and then switch camera back on The indicator light will be green for 2 4 seconds after which it will flash red e If the resetting of camera is successful a Beep tone will be emitted Method 2 Reset via SMS command The user sends following
13. to down position Then take off the power adapter Chapter 3 Define the user 3 1 User authorization level There are three levels each with a different authorization level namely 15 GSM REMOTE CAMERA USER MANUAL Master Families and Guest Table 3 1 the difference in authority for Master Families and Guests users User Type Master Families Guests Functions Change authority password Receive SMS Automatic Receive MMS Alarm Receive alarm calling Get images by E mail Receive SMS Emergency Receive MMS alarm Receive emergency calling Only emergency number Call the camera to listen in live voice YES NO Get work status images help and YES YES instruction by sending SMScommand Password Get images by E mail YES Set remote camera by SMS command Add modify or delete sensor Camera language setting Set infrared body detect function A Note a Any MMS enabled mobile phone can receive the images captured by camera by sending SMS command with password m Any SMS enabled mobile phone can control camera with the password command All the settings of camera can be set or adjusted via a SMS command About the SMS Command 1 Master and families users SMS command format code content 2 Guest users SMS command format code password content 3 The password must be a four digit number 4 The original password is 1234 5 The maximum dig
14. 00 Optional Communication protocols GSM PHASE 2 2 including data operation Wireless sensor receiving code ASK Wireless sensor receiving band 433MHZ or 315MHZ Max wireless sensor 25 units Remote control receiving band 433MHZ or 315MHZ Effective distant of the remote control 20 Meters wide area Image format JPEG Image resolution 160x128 QVGA 320x240 VGA 640x480 Camera pixel 300K pixel Camera Shooting angel 70 degree Best shooting distance in night lt 8 Meter Lithium battery 800 mAh Battery standby time 24 hours Affected by network GSM REMOTE CAMERA USER MANUAL GSM REMOTE CAMERA
15. 320x240 See 5 1 1 image size The default 23 GSM REMOTE CAMERA USER MANUAL image size is 320x240 QVGA e Image quantity should be in the range of 1 2 when the image size is set at 640x480 Successful SMS reply Your request received device is sending the MMS image e The user will then receive the MMS message momentarily e The file format of the sent MMS images is Time jpg For example a file with name of 094843 jog means the image is captured with at 9 48 43AM e Ifa sent MMS file has several sequential pictures the size of the pictures is pre set by user See 5 1 1 image size The interval between the pictures is default 0 5s and can be pre set by user See 5 1 3 image Interval 4 2 3 Capture images and send to user s E mail address Authority Master and family users Description If the master or family user wishes to send the images to his her E mail address the E mail address must be set at first See chapter 4 3 E mail settings for more information regarding this function Method The user sends following SMS message in order to Capture image s and send to pre set E mail 03 mageQuantity 1 22 e Image quantity should be in the range of 1 8 when the image size is set at 160x128 or 320x240 e Image quantity should be in the range of 1 2 when the image size is set at 640x480 Successful SMS reply Your request received device is sending the MMS image 24 GSM REMOTE CAMERA USER MANUAL
16. 4 2 4 Capture images and send to an appointed mobile or E mail address Authority Master family and guest users Method The user sends the following SMS message in order to Capture image s and send to appointed mobile or E mail address For Master and family user 304 NumberOrEmail ImageQuantity 23 For Guest user 30 Password NumberOrEmail imageQuantity 24 e NumberOrEmail should be the mobile phone number or E mail address which the user appointed to send image e Image quantity should be in the range of 1 8 when the image size is set at 160x128 or 320x240 The default image size See 5 1 1 image size e Image quantity should be in the range of 1 2 when the image size is set at 640x480 Successful SMS reply Request received Sending to images e The file format of the sent MMS images is Time jpg For example a file with name of 094843 jpg means the image is captured with a camera at 9 48 43AM e f a sent MMS file has several sequential pictures the size of the pictures is pre set by user See 5 1 1 image size The interval between the pictures is default 0 5s and can be pre set by user See 5 1 3 image intervals 4 3 E mail settings amp Note This function should be supported by the local network provider Please contact your local network provider for the details concerning this function 25 GSM REMOTE CAMERA USER MANUAL 4 3 1 Add modify an E mail address Authority Master and family
17. Authority Master and family user Method 51 GSM REMOTE CAMERA USER MANUAL The user sends following SMS message in order to set SMS notification upon the power supply changing Default 144 1 84 SMS notification upon power source change enabled User will receive SMS when power supply changing When external power off device was run by internal battery user will receive SMS External power ceased Running on battery When external AC power was on again user will receive SMS External power resumed No SMS notification upon the power supply changing 144 0 85 SMS notification upon power source change disabled Chapter 6 Maintenance Store and use the remote camera in suitable temperature Too high or too low temperature will likely to damage the camera Try to keep the camera and all its accessories dry Do not store and use it in the bathroom or other place with high humidity Do not allow pour water or other liquids into the camera otherwise it might cause malfunctions Do not store and use the camera in dusty Do not use alcohol acetone and other similar solvents to clean it Wipe it with soft wet cloth Do not attempt to open it except as instructed If the camera does not work normally try to resolve it as the guide of the general troubleshooting if to the problem can not be solved contact with the dealer immediately 52 GSMR EMOTE CAMERA USER MANUAL To prolong the life span o
18. Basic use and settings cccccceeeeeeeeeeeeeeeeeeeeeeeaee 21 4 1 Network parameter settings secsec 21 4D Capture iMg eS si sninn eioen as 22 4 3 E Mail SCttin gs oniinn iiei ieaiai 25 4 4 Timing send images to mobile 26 4 3 Remote control osusi a 28 4 6 Emergency Alarms ccccceeccesceseceteceecnseeneeeeeeneees 30 4 7 Listening in and talking s 32 4 8 Infrared body detectot scssi 33 4 9 Motion detection ossee 34 GSM REMOTE CAMERA USER MANUAL 4 10 Wireless SCNSOV S eccccccsscceceescecesssseesecsseeesssseeeessaees 35 4 12 Timed arming the camera ossee 41 4 13 Auto disarming the camera 43 4 14 Camera language setting oooocececeeeeeseeeeee 44 ATS Check Status ccstsecsasesceseesaacyahisensegethaetiieagesaetes s 44 4 16 Getting help cccssccocctieensssseies hs opieeee peu eieweeeeet 45 4 17 Resetting the camera 46 Chapter 5 Advanced SettingS cccccceceeeeeseeeeeeteeeeeeneeeeeeeeeeeaee 47 D LAMAZE SCUING So Mave cd ei ees n ee yess Batre vhees deny 47 5 2 Automatic alarm settings nesses 48 5 3 Turn on off LED indicator on the camera 5I 5 4 SMS notification upon the power supply changing 51 Chapter 7 General Troubleshooting ccccceeeeeeeeeeeeeeeteeeeeeeee 53 Appendix 1 SMS command list cccceccceeceeeeeeeeeeeeeeeeeeeeeneeetes 55 Appendix 2 Main Technical Parameters a se 63 GSM REMOTE CAMERA USER MANUAL 1 Purchase a GSM
19. Description Camera will send out MMS and SMS alarm message e Eg 05 door2 when door2 sensor triggers camera alarm Camera will send out SMS and MMS alarm messages e Otherwise if the first character of Sensor Description without camera will send via SMS only e Eg 05 door1 when door1 sensor triggers camera alarm Camera will send out SMS alarm message only e If the sensor is set send alarm via SMS only when it alarm by this command successfully the user can not use command 81 82 83 and 84 to change alarm way of the sensor 3 When camera has received the SMS command it will emit a Beep tone and the indicator will flash red and green alternately Camera will then send a notification message via SMS to the user s Device is ready to load wireless sensor Activate the sensor immediately 4 The user needs to make the sensor work and transmit signal to be studied by camera E g For a wireless door magnet open and close the door once to send the signal to the camera 5 When camera receives the sensor signal it will emit a Beep tone and send a notification message via SMS to the user s stating sensor successfully loaded 6 To exit the loading mode manually press the Reset key of the camera camera will emit a Beep tone and exit the loading mode 37 GSM REMOTE CAMERA USER MANUAL Failed SMS reply e If Camera failed to load the sensor the indicator light
20. GSM REMOTE CAMERA Pen User Manual E Manual version 1 0 GSM REMOTE CAMERA USER MANUAL GSM REMOTE CAMERA Thank you for purchasing the Camera This camera is a remote controlled image capturing device consisting of a microphone infrared lights and a high quality 300 000 pixel camera lens The Camera can capture images according to a pre programmed remote command and then send it to your multimedia messaging MMS enabled mobile phone with color display or to an e mail address You can control and change the camera settings via SMS command The MMS sent by the Camera can be viewed by using your mobile phone You also can opt to view a slide of consecutive photos taken by the GSM Remote camera The built in high light infrared LED s allows the camera to capture clear images even in dark environment The Camera is compatible with standard 433MHZ 315MHZ wireless sensors such as PIR door magnet and smoking sensors As soon as the wireless sensor triggers the camera alarm you or your families and or your guards can thus receive the alarm message via SMS MMS or standard calls according to the pre programmed However the camera can perform its duty well without any wireless sensor too The camera has a motion detective function and an integrated infrared body detector It will therefore detect any unauthorized entry into your house and notify you via SMS MMS standard calls or E mail All services and functions nee
21. Number Delete all family Add single o emergency number 106 EmergencyNum Master on the camera Add several emergency numbers Master on the camera ber Delete an emergency 107 EmergencyNum Master number or 12 107 Emergency La bce Neer Emergen Master gency cy Number Delete all emergency 13 107 Master numbers GSM REMOTE CAMERA USER MANUAL Category Function Command User meseage wap 14 49808 nei ae Osame 16 Set MMS center 124 MMScenter Master 17 125 GatewaylP WA Network PGatewayPort HTTP parameter Set APN parameters GatewayPort APN AP Master settings Nusername APNpass word Clear existed Network parameter settings and use SIM 54 Master card default MMS parameter Check the current MMS parameter 554 Capture one image Master mobile 03 passwordit st 20 Master Capture more than 03 lmageQuantity Family one image and send 21 to the user mobile 03 Password lmage Guest Quantity capture Captare magets 22 images and send back to 9 user s pre set E mail 034 ImageQuant address Master Family 23 Capture image s Sor Number E matt and send to mageQuantity appointed mobile or 94 30 Password N E mail address umber Emai timageQ Guest uantity Master Family GSM REMOTE CAMERA USER MANUAL Category Function Command 103 value 10 1_ second Default value 5 0 5 second Add modify an E mail 25 Master E mail a
22. SIM card mobile phone card from GSM network service and install it in the camera This SIM card number is referred as camera number on this brochure 2 The user needs to activate the MMS function and Caller ID Presentation function of SIM card and deactivate PIN code of the SIM Contact with GSM network service for support 3 Change the original password at the beginning use Be sure to keep the password and SIM card number secret Do not disclose this information to anyone other than the authorized users in order to ensure your safety For your safety This product is a wireless signal transmission device Keep it away from electronic equipment likely to interfere with the wireless signals in order to avoid signals interference Switch off your camera and mobile phone when entering areas marked Explosive Might explode Closed wireless transceiver devices etc Do not cast this product in a fire as this may cause the battery to explode This product should only be operated from power approved by the product manufacturer The use of any other types of power may damage the product Keep the product and its accessories out of the children reach GSM REMOTE CAMERA USER MANUAL Exception clause T We operate on a policy of continuous development We reserve the right to make changes and improvements to any of the products described in this document without prior notice We don t guarantee for the docume
23. SMS message to camera in order to Reset the camera 08 password 67 46 GSM REMOTE CAMERA USER MANUAL Successful SMS reply Device successfully reset to default settings Chapter 5 Advanced settings 5 1 Image settings The user sends the following edit message via SMS to camera in order to configure the following settings 5 1 1 Image size For master and family users 32 value 68 If the value is 1 the image size is 160 x128 pixels It s for a standard small screen mobile phone The size of one MMS image file is 4K If the value is 2 the image size is 320x240 QVGA default The size of one MMS image file is 9K If the value is 3 the image size is 640 x 480 VGA The size of one MMS image file is 33K Successful SMS reply Image size has been reset to 5 1 2 Image quantity For master and family users 33 quantity 69 The default quantity value is 3 with the default image size 320x240 and the Image capturing interval time 0 5s The quantity value should be in the range of 2 8 If the image size is 640x480 up to 2 image quantity can be used The image size and image capturing interval time can be changed see chapter 5 1 1 and 5 1 3 Successful SMS reply 47 GSM REMOTE CAMERA USER MANUAL Number of Alarm images has been set to MMS file name For wireless sensor alarm Time Sensor name For motion detection alarm Time Motion 5 1 3 Image interval
24. al the master user s number Live audio stream can be heard upon answering the emergency call e lf the master user does not answer the call camera will then dial the other emergency numbers as preset order until someone answers the call e The master user s number as well as the emergency numbers will be called a maximum three times If it is still no one answers the call camera will then exit dialing mode automatically e When is pressed camera could send a notification via SMS and MMS instead of making phone calls This all depends on the setting Refer to 4 6 Emergency alarms 29 GSM REMOTE CAMERA USER MANUAL 4 5 3 Arming or disarming SMS notification Authority Master and family users Method The user sends following SMS message in order to set No SMS notification message upon arming or disarming camera via remote control 137 0 30 Successful SMS reply SMS upon status change by remote control disabled Send SMS notification message upon arming or disarming camera via remote control 137 1 31 Successful SMS reply SMS upon status change by remote control enabled Press Arm the camera button on remote controller user will receive SMS Defense mode is activated Press Disarm the camera button on remote controller user will receive SMS Defense mode is de activated 4 5 4 Remove remote control from the camera Authority Master and family users Method The user sends following SMS message in orde
25. ared body sensor smoke sensor gas sensors etc Any activated sensor will notify the authorized users via SMS Infrared light The built in high light infrared LED s allows the camera to capture clear images even in dark environments or areas with insufficient lighting High quality camera 300 000 pixel CMOS camera in order to obtain a clear image via MMS Send images to mobile The camera will send MMS images to your mobile Therefore you can check on the monitored areas at any time and anywhere GSM GPRS network coverage and MMS service coverage Send images to E mail The camera can send images to preset available E mail address Multi mode alarm The camera can send alarm messages via SMS MMS E mail or standard phone call Fixed time monitor The monitoring schedule can be set with multiple time intervals Easy installation Wireless connection The camera can be installed at any place required by the authorized user Accessories Includes 2 remote controls each consisting of a panic button as well as buttons to arm or disarm the camera Built in lithium battery Rechargeable battery ensures operation of camera amid external power failures Downloadable user manual This manual can be downloaded at any time via SMS command GSM REMOTE CAMERA USER MANUAL 1 2 Package contents Remote camera 1 unit Power adapter 1 unit C D GSM Remote camera A Remote control 2 uni
26. ber as well as the pre set emergency numbers 39H 0 33 Successful SMS reply Voice call to preset number upon emergency alarm enabled Emergency Mode2 To send a notification via SMS and MMS to the master user as well as the pre set emergency numbers 39 1 34 Successful SMS reply SMS and MMS notification upon emergency alarm enabled Press Emergency button on remote controller user will receive SMS and MMS SMS Receive emergency alarm MMS Picture title HH MM SS Emergency alarm 31 GSM REMOTE CAMERA USER MANUAL 4 7 Listening in and talking 4 7 1 Call the camera to listen in and talk Authority Master and family users Method The user calls camera after which it will answer automatically The user can then listen in the live audio in the monitoring area Only one line can be connected to camera at a time 4 7 2 Listening in and talking upon emergency alarm Description e Whether camera is in arm or disarm status it will automatically dial the Master user s phone number if the emergency button is pressed The Master user can listen in by answering the call e If the Master user does not answer the call camera will automatically dial the other emergency numbers sequentially This notification process will repeat three times and if still unanswered camera will automatically exit the dialing mode 4 7 3 Listening in and talking upon automatically alarm Description e When the camera
27. d to be supported by the GSM network and a SIM card Details of the functioning and advanced operation of this camera are described in this instruction manual GSM REMOTE CAMERA USER MANUAL CONTENTS FOr YOur safety sicion oss tikes 6 Exception clause ecceeeseceseseessecesseeenseceeeeeeaseceeeeeeeaeeceaeeesaee 7 Chapter 1 Features and aCCeSSOFICS ccccceeeeeeeceeeeeteeeeeteees 7 1 1 Main functioneren 7 1 2 PACKAZE contents sssumusisriricorisussssirsrerisesussass 9 1 3 Products features siciceinincsiciiinieisiennen 10 14 Light TNAICAION 5s ccisacecsesvesanesisniensnssedsestiness chaneassensies 12 Chapter 2 Installation 2c ccchi eae aciseseiven alee aueee 13 2 1 Install the SIM card oossoo 13 2 2 Host base board application 13 2 3 Mount the camera 14 2 4 Choose the installing Place cecceecceeceeeeeeeeteeeee 14 2 5 Connect external POWED sccecccecceesceesceteceseceseenseenes 15 2 0 Power ONS Off sovicnivnesoniocsasstsvnesasesseosionicasaneseniosnaeys 15 GSM REMOTE CAMERA USER MANUAL Chapter 3 Define the user ccceccceeseneeeeeeeeeeeeeeeeeeaeeeeeneeeeeeaee 15 3 1 User authorization level ceccecceecceecesceesceseceeeee 15 3 2 Switching on off the socket output manually 17 3 3 Define family USCH 1 ccseccceccceseceenseceseeenseceseeeenaeeees 18 3 4 Define Guest USEF iinis tsisrrkiasissi sisitan itai 20 3 5 Define emergency number ossee 20 Chapter 4
28. ddress 108 EmailAddresst Family settings Delete all E mail 26 109 Master address EEE Enable timing sends MMS images 27 11541 28 116 WorkDay S Timed Set time period to tartTime 1 EndTime 1 auto send MMS IntervelTime 1 Star image tTime3 EndTime3 int ervelTime3 Disable timing send MMS image 29 115 0 capture The interval time for images the images capture imaging No SMS notification message upon Master arming or Disarming 30 137 0 Famil camera via remote y control Remote part aie message control upon arming or 31 137 1 ee disarming camera via y remote control Remove all remote Master controls from the 32 111 Famil camera y Emergency Master Mode1 to dial 33 39404 Emergency Mode2 to send SMS 34 39 1 Mare and MMS message y 7 GSM REMOTE CAMERA USER MANUAL Category Function Command User Activate infrared Master body detector 35 118 1 a Family infrared default bod Deactivate infrared 36 118 0 Master d cede body detector ee Family Internal infrared body Master detector link to 37 166 1 p f ame Family motion detector Deactivate motion Master detection default 38 22404 Activate motion Master detection 39 22414 Send five images Master Motion upon motion 40 142 1 Famil detection detection alarm y Cancel send five images of motion 41 142 0 Kare detection alarm y Motion detection Master sensitivity Family Make cam
29. ee chapter 5 1 1 Image size and chapter 5 1 2 Image quantity when alarm 33 GSM REMOTE CAMERA USER MANUAL Enhanced Application of Infrared body detector link motion detection at some special situation only both of Infrared body detector and motion detector were actived with 10 seconds the device send motion detection alarm Such case will be avoid the lighting changing or falling leave small flying insects cause wrong alarm Infrared body detector link motion detector 166 1 37 Combined motion detection and infrared sensor actived 4 9 Motion detection Q Description The motion detection feature is based on image frame compare technology The firmware will compare front and after images which capture from camera and therefore detect motion The motion detection feature only functions when camera is armed i e arming camera enables the motion The motion detection feature is also functional when camera is in its default setting When the motion detection alarms the notification pictures will be sent on one message via MMS The default quality of individual picture is 5 and the size is 320x240 pixels In order to change the setting see chapter 5 1 1 Image size and chapter 5 1 2 Image quantity when alarm Note If camera faces an object that moves constantly such as a tree 34 GSM REMOTE CAMERA USER MANUAL shaking in the wind it will send alarm message constantly Recommend to use the came
30. er can dislink appointed wireless sensor all sensors Combined motion detection and sensor deactived Including bulit in PIR sensor 166 0 4 11 Arming or disarming camera manually 4 11 1 Arming camera manually Authority Master and family users Description e When camera is arming it can be triggered by all loaded sensors infrared body detector and motion detector Camera will automatically send alarm message or making a phone call once it is triggered 39 GSM REMOTE CAMERA USER MANUAL e Once camera alarms automatically after it finish sending the alarm message it will be at the alarm suspension situation for default 1 minute that is the camera can not be triggered again within a period time How to change alarm suspension time period Refer to chapter 5 2 11 for more details Method Method 1 The user sends following SMS message in order to Arming camera manually 01 49 Method 2 Press on the remote control whilst pointing it in the direction of camera Camera will emit a Beep tone to indicate that arming camera is successfully Successful SMS reply Defense mode activated The indicator light will flashing and 20 seconds later turn green no flashing 4 11 2 Default arming mode e In this mode the infrared light will be on e When motion is detected a notification will be sent via SMS to preset user numbers Five notification pictures will be sent on one message via MMS MMS image q
31. era enter loading mode and set on Master i pi corresponding alarm 05 SensorDescriptio Family mode fi Make camera enter 43 Master wireless loading the wireless 196 SensorDescripti Famil sensor panic button mode ort y 44 112 SensorD Remove a wireless i112 SensorDese Master sensor Family Remove all wireless sensors 58 GSM REMOTE CAMERA USER MANUAL Category Function Command wireless sensor wireless sensor link 46 166 2 SensorD to motion detector escription 1 Mireles ce 47 166 2 SensorD Master detector escription 0 Family All Sensors include infrared body Master detector dislink to 48 166 0 Family motion detector wireless sensor alarm without 4004 Master sending MMS y wireless sensor Master alarm to send MMS 401 Arming camera 49 01 Master manually TN Family Disarming camera 50 02 Master manually EEEE Family Enable timing arms Master GEET 52 129 WorkDay A Set time period to rmTime1t DisarmTime Master arm the camera 14 ArmTime3 Disa_ Family rm Time3 Ams Disable ti Mast or isable timing arm aster disarming mSS camera Activate auto disarming the 54 138 1 sar camera y Set the value of alarm times when camera is auto disarming 55 139 times 59 GSM REMOTE CAMERA USER MANUAL Category Function Command User Arming Disable the function Master or of auto disarming the 56 138 0 A A Family disarming camera camera
32. essful SMS reply Family Number The Associate phone number has been added successfully 3 3 2 Check family user s number Refer to Chapter 4 15 Check status 3 3 3 Delete family number Authority Master user Method The user sends following SMS message in order to Delete a family number 113 FamilyNumber 6 Delete several family numbers simultaneously 113 FamilyNumber Family Number 7 Delete all family numbers 113 Successful SMS reply Family number Associate phone number deleted Failed SMS reply Associate phone number does not exist 8 19 GSM REMOTE CAMERA USER MANUAL When user type the wrong phone number not exited in device to delete SMS Family number Associate phone number deletion failed 3 4 Define Guest user Any selected person can operate in the Guest category if they know the password and the SIM number The Guest user s can then use their mobile phones to send a SMS command including password to camera in order to obtain an MMS image 3 5 Define emergency number The Emergency Number is the phone numbers which camera will dial when the emergency button of the remote control is pressed Emergency numbers could be the telephone numbers of guards family numbers police etc 3 5 1 Add emergency number Authority Master user Description e The master user s number default to be emergency number e When the Emergency button is pressed camera will automatically dia
33. f the battery connect the camera to the power supply to charge the built in Lithium battery for 4 hours every 3 months if the camera does not use for long time Charge the battery at least 12 hours at the first time use to achieve the full performance of the battery Chapter 7 General Troubleshooting No General Trouble Can t start camera Indicator is working All functions disable Indicator is working Indicator constant light in red color Camera didn t response of any operation After starting the camera indicator flashed in red color and can I Possible Reason Other master is already set in the camera Caller ID presentation or MMS functions of the SIM card do not active insufficient fee of the SIM card Can t find or identify the SIM card Camera work abnormally Network signal weak or network busy Solution Recover to factory default setting Contact network provider to active SIM card function Pay for the card SIM card no install properly Power off the camera and check it again Switch off the power check SIM card or reset factory setting Place the camera at other place with strong signal and try again GSM REMOTE CAMERA USER MANUAL not turn to SIM card PIN code green actives Close the PIN code Contact with local operator to check of it Connect external Remote Camera low power power to recharge the control can t ba
34. ing to the settings 4 12 2 Set time period to arm the camera AN Method 41 GSM REMOTE CAMERA USER MANUAL The user sends following SMS message in order to Set time period to arm the camera 129 WorkDay ArmTime 1 DisarmTime1 4ArmTime3 Disarm Time3 52 e Up to 3 periods be allowed per workday Each period time should set by Arm Time Disarm Time e Work Day one digit the values lie in the range of 0 to 9 e The following table contains the descriptions of each value Value Corresponding day 0 Sunday Monday Tuesday Wednesday Thursday Friday Saturday Everyday Monday to Friday Monday to Saturday e Arm Time and Disarm Time Be consists of 4 digits hh mm and works on a 24 hour clock For example 0000 means time 00 00 hh mm 2359 means time 23 59 hh mm The Airtime and Disarm Time should be in the same day and the Disarm Time must be later than Airtime during the same period Successful SMS reply Periodic of arming and disarming parameter is oJI NIDIA R wsrm 4 12 3 Disable timing arm the camera N Method The user sends following SMS message in order to Disable timing arm the camera 128 0 53 Successful SMS reply 42 GSM REMOTE CAMERA USER MANUAL Periodic of arming and disarming the device deactivated 4 13 Auto disarming the camera Description In order to avoid camera sending out alarm message all the time and out
35. is in armed status and if the user preset the auto alarm way as calling the user Refer to chapter 5 2 8 Call notification upon alarm for the details of preset alarm a call will automatically go through to the Master user s preset numbers when the camera alarms The user can communicate with the monitoring area by answering the call 32 GSM REMOTE CAMERA USER MANUAL e lf the Master user does not answer the call the camera will dial the other pre set Family number until the call is answered This notification process will be repeated three times and if still unanswered the camera will automatically exit the dialing mode Enhanced Application of the device The device have two way communication function as a mobile phone device 4 8 Infrared body detector Authority Master and family users Description When camera is working under arming mode if someone approaches to the detecting area the built in infrared body detector will trigger the camera alarm Method The user sends following SMS message in order to Activate infrared body detector default 118 1 35 Deactivate infrared body detector 118 0 36 Successful SMS reply Infrared body detector activated Infrared body detector deactivated e When the infrared body detection alarms the notification pictures will be sent on one message via MMS The default quality of individual picture is 5 and the size is 320x240 pixels In order to change the setting s
36. its that are allows for the phone number is 16 GSM REMOTE CAMERA USER MANUAL sixteen 6 Camera will reply to the user after it receives the SMS command A Note m The symbol must not be ignored when typing an SMS command a No allow any space within the commands 3 2 Switching on off the socket output manually In order to enable all the functions on the camera the Master user must store his her mobile number in the camera s memory Only one Master s mobile number Master number is allowed for a camera 3 2 1 Add a master number to the camera Authority Master user Description If the camera is being used for the first time or it has been reset the master user s number must be programmed into the camera in order to ensure activation The following methods can be used N Method The user must edit and send the following SMS to camera via his her mobile phone the phone number will be the Master number in order to Add a master number to the camera 00 Device phone number 1 Reply SMS Welcome to the GSM Remote Camera Your password is 1234 SIM kkkkk Activate Successfully Reply SMS Invalid command format Activate Fail User tries to activate a camera which has Master phone number already GSM REMOTE CAMERA USER MANUAL 3 2 2 Change the master number Authority Master user Method The user sends following SMS message in order to Change the master user s number 14 NewMas
37. l the Master user s number followed by the other pre set emergency numbers the default mode is dial phone mode Each camera can have up to 9 emergency numbers Not including the Master user s number K Method The user sends following SMS message in order to Add single emergency number on the camera NZ Za 106 Emergency Number 9 Add several emergency numbers on the camera 106 EmergencyNumber EmergencyNumber 10 The EmergencyNumber is the phone numbers 20 GSM REMOTE CAMERA USER MANUAL Up to 9 emergency numbers can be stored on one camera Successful SMS reply Emergency Number Add emergency phone number successful Failed SMS reply e If 9 emergency numbers the maximum amount per camera are used on camera and the master user attempts to add another one the following notification message will be sent via SMS Emergency phone number list is full Please delete old number s e f an existing number is being added again the following notification message will be sent via SMS Emergency phone number already exists 3 5 2 Delete emergency number Authority Master user Method The user sends following SMS message in order to Delete an emergency number 107 EmergencyNumber 11 Delete several emergency numbers 107 EmergencyNumber Emergency Number 12 Delete all emergency numbers 107 13 Successful SMS reply Emergency phone number is deleted successfully
38. lowing SMS message in order to set English default 127 1 57 Russian 127 2 58 Spanish 127 3 59 France 127 4 60 Successful SMS reply Set version successfully 4 15 Check status Authority Master family and guest users Method The user sends following SMS message in order to Check the present settings and work status of camera For master and family users 07 61 For guest users 07 password 62 Successful MMS reply Camera will reply via MMS depending on which status is currently set on Such as Dis armed SMS upon alarm MMS upon alarm 44 GSM REMOTE CAMERA USER MANUAL Voice call to preset number upon alarm Motion detection Infrared body detector Audio Warning Periodic sending of images Periodic of arming and disarming the device Alarm pictures quantity Image size Image direction Image contrast Image interval Image brightness Image compressibility Motion detection sensitivity MMSC IP Port APN User Password Master phone number Associate phone number Emergency phone number Sensor 4 16 Getting help Authority Master family and guest user Description The user can send SMS to camera in order to get the SMS command list which the command description as well as the codes will be supplied or get the MMS named CAMERA user manual on which all the command descriptions as well as the codes will be supplied The list and
39. nt veracity reliability or any content except regulate in proper laws Including no guarantee for product suitable market or suitable area promise Use only this product according to the law Respect one another s privacy Neither monitor another s home nor private We hold no responsibility for the illegal use of this product We hold no responsibility for any loss of data or income or any special incidental consequential or indirect damages howsoever caused The contents of this document are provided as is Except as required by applicable law no warranties of any kind either expressed or implied including but not limited to the accuracy reliability or contents of this document We reserve the right to revise this document or withdraw it at any time without prior notice Chapter 1 Features and accessories 1 1 Main function This product uses a GSM SIM card It can send multimedia messaging MMS images to MMS enabled mobile phones with color display or to an E mail address Remote control Control and configure the camera with short messages SMS commands from a mobile phone Real time audio call the camera number SIM card to listen in live voice Motion detection Detect and notify authorized users of any motion in the monitoring area s Integrated infrared body detector 7 GSM REMOTE CAMERA USER MANUAL Sensor detection Allowed to load up to 25 sensors such as door magnet sensor infr
40. nter loading mode and set corresponding alarm mode 05 SensorDescription 42 Successful SMS reply Device is ready to load wireless sensor Activate the sensor immediately After Sensor Description was actived device will receive SMS sensor successfully loaded Make camera enter loading the wireless panic button mode 196 PanicDescription 43 Successful SMS reply Ready to load panic button Activate panic button NOW After Panic Description was actived device will receive SMS sensor successfully loaded e Sensor Description and Panic Description is used for identify different sensors affiliated with each camera It can be numbers and letters e Sensor Description could be empty If SMS command is only 05 camera will recognize the sensors in number order been added to the camera For example Sensor1 Sensor2 Sensors3 When a sensor triggers camera alarm camera will default send out SMS alarm message only e Panic Description could be empty If SMS command is only 36 GSM REMOTE CAMERA USER MANUAL 196 camera will recognize the panic button in number order been added to the camera For example SOS1 SOS2 SOS3 When a wireless panic button triggers camera alarm camera will send out emergency alarm Refer to chapter 4 6 Emergency Alarms e Up to 9 characters can be typed in Sensor Description and Panic Description Set the wireless sensor alarm mode e If you add at front of Sensor
41. obile or E mail address Master family member call the camera to get the images 22 GSM REMOTE CAMERA USER MANUAL Master family send SMS command to the camera to send MMS image to an E mail address Need to pre set E mail address 4 2 1 Capture one image and send to the user mobile Authority Master family and guest users Method Method 1 e Master or family user calls the camera and hand up upon hearing the ringing tone within 20 seconds e Camera will reply SMS notification Image capturing request received The camera is busy sending the MMS messages Successful SMS reply Your request received device is sending the MMS image e The user will then receive the MMS message momentarily e The guest users are unable to capture an image by using method 1 If the guest users call the camera it will neither send a notification message nor an MMS message Method 2 The user sends following SMS message in order to Capture one image and send to the user mobile For master and family users 03 18 For guest users 03 password 19 4 2 2 Capture images and send to the user s mobile Authority Master family and guest users SX Method The user sends following SMS message in order to Capture images and send to the user mobile For master and family users 03 IlmageQuantity 20 For guest users 03 Password lmageQuantity 21 e Image quantity should be in the range of 1 8 when the image size is set at 160x128 or
42. r to Remove all remote controls from the camera 111 32 Successful SMS reply All remote controls deleted 4 6 Emergency Alarms Authority Master and family users Description e When the wireless panic button or button on the remote camera is pressed camera will go into emergency mode to alarm The wireless panic button and remote control need to be loaded onto 30 GSM REMOTE CAMERA USER MANUAL Camera before use Refer to chapter 4 10 1 and 4 5 1 for details There are two modes of the emergency alarm could be set on the camera Emergency Mode1 Default To dial the master user s number as well as the pre set emergency numbers When the emergency button is pressed on the remote control camera will dial the master user s number as well as the pre set emergency numbers camera will repeat this process 3 times until someone answers If after 3 attempts there is no answer camera will automatically stop dialing and revert to its preset mode In the case of someone answers he she will be able to listen in the live audio Emergency Modez2 To send a notification via SMS and MMS to the master user as well as the pre set emergency numbers When the emergency button is pressed on the remote control camera will send the notification via SMS and MMS to the master user as well as the pre set emergency numbers Method The user sends following SMS message in order to set Emergency Mode1 To dial the master user s num
43. ra in a still place e Low battery The motion detection function will be deactivated and the configure setting can not be saved when camera is operating in low battery 4 9 1 Activate Deactivate motion detection Authority Master and family users Method The user sends following SMS message in order to Deactivate motion detection default 22 0 38 Successful SMS reply Motion detection is de activated Activate motion detection 22 1 39 Successful SMS reply Motion detection is activated 4 9 2 Send five images upon motion detection alarm Authority Master and family users 2 Description Camera will send out 5 images with fixed size of 160x128 pixels when motion is detected Method The user sends following SMS message Send five images upon motion detection alarm 1424 1 40 Cancel send five images of motion detection alarm 142 0 41 4 10 Wireless sensor s Authority Master and family users 2 Description Any 433MHZ 315MHZ wireless sensor such as infrared body sensor 35 GSM REMOTE CAMERA USER MANUAL wireless door magnet wireless smoke detector etc can be set as an alarm sensor of the camera 4 10 1 Load a wireless sensor or a panic button onto the camera Authority Master and family users Description Up to 25 wireless sensors and panic buttons can be loaded onto one camera Method 1 Power on the wireless sensor 2 The user sends following SMS message to Make camera e
44. s 12 0 75 Successful SMS reply MMS notification upon Alarm disabled alarm with SMS only 5 2 6 MMS notification upon alarm Default e For master and family users 12 1 76 Successful SMS reply MMS notification upon Alarm enabled 5 2 7 No call notification upon alarm Default For master and family users 13 0 77 Successful SMS reply Call preset number upon Alarm disabled 49 GSM REMOTE CAMERA USER MANUAL 5 2 8 Call notification upon alarm For master and family users 13 1 78 Successful SMS reply Call preset number upon Alarm enabled If camera alarm automatically it will dial the master user s number Live audio stream can be heard upon answering the call If the master user does not answer the call camera will then dial the family user s numbers in the preset order until someone answers the call The master user s and the family user s numbers will be called a maximum three times If it is still no one answers the call camera will then exit dialing mode automatically If SMS MMS and calling notification are all activated when camera alarm automatically it will firstly send an SMS secondly an MMS and thirdly a calling notification to preset users 5 2 9 No MMS notification to pre set E mail address Default For master and family users 110 0 79 Successful SMS reply Email notification upon alarm disabled 5 2 10 MMS notification to pre set
45. terNumber 2 Successful SMS reply New master phone number is Then the old master user s number will not be able to control camera anymore 3 2 3 Change password Authority Master user Description In order to ensure your privacy and safety during the use of this camera change the password once camera is being used Method The user sends following SMS message in order to Change the password 04 oldpassword newpassword 3 The password is a four digit number The original password is 1234 Successful SMS reply The password successfully changed to Failed SMS reply If a user other than the master user attempts to change the password a notification message will be sent via SMS Sorry you are not authorized to use this command 3 3 Define family user Family users have the authority to listen in on the camera receive images load the sensors and remote controls to the camera and 18 GSM REMOTE CAMERA USER MANUAL receive notification when motion detection activated The family user s mobile numbers are set by the Master user The family users should remember and safeguard the camera s SIM number 3 3 1 Add a family number Authority Master user Method The user sends following SMS message in order to Add a family number 06 FamilyNumber 4 Add several family numbers 06 FamilyNumber Family Number 5 Up to 10 family users number can be stored on one camera Succ
46. ts User Manual User manual 1 unit Base board 1 set GSM REMOTE CAMERA USER MANUAL 1 3 Products features Speaker Light sensor Camera Infrared lights Reset key 8 pes Indicator light PIR sensor Microphone Base board Power switch Battery cover Power Interface Mini USB Base board conneting slot Base board installing hole Figure 1 Host instruction Keep the camera lens clean to insure best imaging qual 10 GSM REMOTE CAMERA USER MANUAL Antenna Remote control indicator Arm the camera button Disarm the camera button Emergency button Figure 2 Remote control Instruction Battery There is battery holder on the rear of the remote control It needs one 27A 12V battery When this battery is running out of power camera will emit Beep beep warning tone and then send a SMS notification message to Master user GSM REMOTE CAMERA USER MANUAL 1 4 Light indicator Color Action Status Flash slowly Searching the network i Sensor alarm motion detection Flash quickly alarm infrared body detector alarm Not installed SIM card or the remote Constant Light Armed status Arming command received Camera will enter arming mode after Flash twice per 20 seconds 2 seconds During the pause between two Green alarms Flash slowly Disarmed status Flash quickly Processing data Successfully reset factory setting or
47. ttery work Or action slowly Remote control low Change remote Or control power control battery distance Two remote control range work shortened simultaneously SIM card invalid Try only one remote control The remote control or sensor already Exit the loading studies status Can t add successfully new remote 7 control or The sensor quantity Delete old sensors wireless is already reaches before add new sensor its max number sensor Didn t set master Set master number user number before add sensor Connect the camera to external AC power and charge for at least one hour then restart camera Can t start the camera after long Battery runs out of time supply power with the battery Note If the problem can t be solved with above guidelines contact to your local distributor or after service center 54 GSM REMOTE CAMERA USER MANUAL Appendix 1 SMS command list Category Function Command User 1 Adaa masternumber 00 Device phone nu Master to the camera mber Change the master 2 user sndimber a ar Master 3 Change the 04 oldpassword ne Master password wpassword 4 Add a family number flet FamiNumnert Number Master Add several family HYO AaMIIYNUMDE HF numbers 06H Fam Number Master Family Number e rE number 113 FamilyNumber t Define Delete several family 7 the numbers 113 FamilyNumber Master jeer simultaneously lee Ts
48. uality is 320x240 QVGA e When the integrated infrared body detector and loaded wireless sensor alarms camera a notification will be sent via SMS to preset user numbers Five notification pictures will be sent on one message via MMS MMS image size is 320x240 QVGA e Once camera alarms after it finish sending the alarm message it will be at the alarm suspension situation for default 1 minute 4 11 3 Disarming camera manually Authority Master and family users 40 GSM REMOTE CAMERA USER MANUAL Description When camera is working under disarmed mode all loaded wireless sensor integrated infrared body detector and motion detection function could not work But it will send an SMS MMS notification or make phone calls only when button on remote control is pressed Method Method 1 The user sends following SMS message in order to Disarming camera manually 02 50 Method 2 e Press the G button on the remote control whilst pointing it in the direction of the camera Successful SMS reply Defense mod is de activated Camera will emit a Beep tone and the indicator light will flash green 4 12 Timed arming the camera Authority Master and family users 4 12 1 Enable timing arms the camera Method The user sends following SMS message in order to Enable timing arms the camera 128 1 51 Successful SMS reply Periodic of arming and disarming the device activated Then camera will arming automatically accord
49. users 2 Description e Each user number can be set only one E mail address If more than one E mail address is set onto one user number camera will only recognize the E mail address put in the last e If the user wishes capturing an image and sending to his her E mail address see 4 2 3 capture images and send to user s E mail address e If the user wishes camera sending the alarm image to his her E mail address see 5 2 10 MMS notification to pre set E mail address Method The user sends following SMS message in order to Add modify an E mail address 108 EmailAddress 25 Successful SMS reply Current alarm notification Email address is 4 3 2 Delete E mail address Authority Master user Method The user sends following SMS message in order to Delete all E mail address 109 26 Successful SMS reply E mail address deleted 4 4 Timing send images to mobile Authority Master user 4 4 1 Enable timing sends MMS images Method 26 GSM REMOTE CAMERA USER MANUAL The user sends following SMS message in order to Enable timing sends MMS images 115 1 27 Successful SMS reply Periodic sending of images activated 4 4 2 Set time period to send MMS images Method The user sends following SMS message in order to Set time period to auto send MMS image 1164 WorkDay StartTime 1 EndTime 1 IntervelTime 1 StartTime3 EndTime3 intervelTime3 28 e Max allow 3 periods per workday Each period time

GSM REMOTE CAMERA User Manual - Sunsky

Contents

Download Pdf Manuals

Related Search

Related Contents