User Manual - E
Contents
1. then either A Attach SSD bag to your tripod B C Thread your belt through the loop on the bag Picture required D Use the lanyard to go around neck for front usage or over neck and shoulder for side of body usage E F If this is new install of the SSD the camera will ask whether you want to format the SSD Go ahead and select Format Media Please note that it will clear everything on the SSD when you do this CHB 2 05min STBY AB TCG 00 09 44 14 Format Media B Now Execute Once the format has been completed you are ready to record The camera will record up to 5h 8m without swapping slots When the SSD is full the camera will switch to other slot and continue recording So if you have an e LCR in that slot with a 32GB card in it you can record continuously for 7hrs before needing to swap any media Or alternately you could swap out the e HDR move the data off it to another device and reconnect once the e LCR is full and continue recording for another 5hrs When recording has been completed Once the recording has been completed the unit can be attached to a computer by the e SATA or USB connectors provided powering either via the 5v input from the AC adaptor or by battery or via the USB cable provided plugging both USB A plugs into the computer to provide power Then the contents can then be either edited directly or copied for editing or archiving Once the recordings have been copie2. User Manual e HDR Hard Disk Recorder The e HDR is designed to work with Sony ExX series of cameras to allow you to record directly to either a Hard Disk Drive HDD or a Solid State Drive SSD It offers up to 84GB of recording or a little over 5hrs of uninterrupted recording The components of the e HDR are e HDR Expresscard 34 with Mini USB interface 1x Mini USB to Mini USB cable 150cm long 1x High speed enclosure with Mini USB and e SATA interfaces 1x Mini USB to 2 x USB A 1x e SATA cable 1xAC Adapter 110 240v to 5v 1x Leather belt bag with lanyard 1x Carrying case Optional Dolgin Power EX V adapter which adapts BPU 30 Battery to 5v The HDD or SSD let s call it SSD from now on is powered by either an AC adapter or a battery pack Initial Setup Please begin by installing your choice of 2 5 SATA II HDD or SSD drive into the enclosure by unscrewing the front face plate of the enclosure The maximum capacity read by the camera extends to 84GB so a 120GB drive will have 36GB of unused Space on it Install the HDD or SSD and Re assemble Once this has been compeleted 1 You insert the e HDR Expresscard into an EX Series camera A N 2 Connect the supplied Mini USB cable to Expresscard and enclosure 3 Power on the enclosure using either the AC adapter provided or a BPU 30 installed in a Dolgin F Power adapter 4 Place units into the supplied Leather bag and
3. d you can either use the camera to format the drive again recommended or use Explorer in Windows or Finder in OSX to delete the data manually Which drives are supported Hard Disk Drives tested Seagate Hitachi Western Digital Solid State Drives tested Transcend Silicon Power
Download Pdf Manuals
Related Search