technical installation manual vers. 13
Contents
1. amping Configuration control cycles and number of detections for activation Technical Characteristics Device Voltage Current Detection Maximum Secure Reference Supply Consumption Angle Detection Area Detection Area SR BUS 9 16V DC BUS 100mA BUS 360 12x6m 6x3m approx area at 2 5m height Installation 3 3 o 2 a cy Detection adjustments The detector emits a detection beam of high intensity being of greater or lesser scope depending on the sensitivity for which it has been programmed from the Development System Installation in a false ceiling SRBUS Ij ingenium www ingeniumsl com SRBUS output wiring Supply absorbed 100mA yBUSing Consumes lt 12V A B Ref Cable 4x0 5mm Detection angles The beam in the longitudinal direction of the device has an angle of 140 and in transversal 70 Detection area The detection area must face the room with the silk screened part of the device face down Detection area at The device can be partially 2 5m from the floor blinded with metal tape to e Guaranteed 6x3m cancel detection in a oe Maximum 12x6m zone direction Floor Guaranteed area 6x3m Maximum area 12x6m Length side of the room Direction of the device Place lengthwise with the length of the device parallel to the length of the room Together with the programming this will ensure optimal detection Do NOT instal2. l In locations susceptible to vibrations Over fluorescent lights
3. movement sensors SRBUS SRBUS Hidden 360 Radiofrequency Detector BUSing For movement detection with concealed installation Detects movement through solid non metallic objects Detects minimum movements Hidden installation in false ceiling wall or waterproof case Automatic reset after each detection Adjustable timer from pulse to 17min Adjustable sensitivity up to 12m Size 65x25x45mm Description The SR BUS is a radio frequency detector for hidden installation can detect movement through walls and ceilings of any non metallic material It is designed to replace passive 360 sensors surpassing its performance Its installation hidden behind walls partitions ceilings junction boxes or waterproof casings ensure safety unwanted in trusions or vandalism to not be accessible By being able to detect the slightest movement it is possible to link the lighting of a room to the presence of people or trigger the intrusion alarm From Development System SIDE you can set the sensitivity the sampling period the response time and the delay after detection and a list of events BUS to send at the time in which detection occurs and when the timer expires Configuration using Development System SIDE 2 programmable scenes for activation and deactivation of the sensor Up to 60 programmable BUS events for each scene Timing adjustment seconds after detection Sensitivity adjustment and d
Download Pdf Manuals
Related Search