Installation Manual
Contents
1. IO 00505 AMM 20 BI Installation Manual Microwave Oven li Before using the microwave please carefully read this manual DEAR CUSTOMER Please read this manual carefully before you start to use this microwave This way you can ensure its proper and correct operation Please preserve this manual and store it near the appliance so that it is available at all times for reference Observe the instructions contained herein to prevent accidents Before using the microwave please careful ly read this manual Store it in such a place so that it may be used in future Please follow the instructions to ensure many years of reliable operation of your oven i Important The appliance is designed for household use only The manufacturer reserves the right to introduce changes which do not affect the operation of the appliance EQUIPMENT ADJUST SCREW AP SCREW B _ ttt SCREW C Be T TRIM KIT PLASTIC COVER _ Frame N Electrical connection The oven is fitted with a plug and must be only connected to a properly installed ear thed socket In accordance with the appropriate regulations the socket must only be installed and the connecting cable must only be replaced by a qualified electrician If the plug is no longer accessible following installation and all pole isolating switch must be present on the installation side with a contact gap of at least 3mm BUILT IN FURNITURE The built in cabinet shall not have a r2. ear wall behind the appliance Minimum installation height is 85cm Do not cover ventilation slots and air intake points BUILT IN FURNITURE 600 s60 8 n 45 362 3 45 al 3 INSTALL THE OVEN IN N a Turn over the oven and install LONG FEET provided in the accessory pac kage INSTALL THE OVEN SCREW B N SEREWE ADJUST HEIGHT ADJUST SCREWA A UPPER AIR TUNNEL ADJUST SCREWA b Fix ADJSUT SCREW A on the UPPER AIR TUNNEL of the oven and fix the TRIM KIT with SCREW B Then install the oven into the cabinet Make sure that the upper side gap between the TRIM KIT and the oven is the same as the bottom side Make sure that the minimum left side gap between the TRIM KIT and the oven is at least 9 mm Adjust the height of ADJUST SCREW A to keep 1 mm gap between the ADJUST SCREW A and the top plane of cabinet Do not trap or kink the power cord NN l EDN eee eee _ N u N TRIM KIT PLASTIC HOLE COVER HOLE c Open the door fix the oven in the cabinet with SCREW C at the INSTALLATION HOLE of TRIM KIT Then fix the TRIM KIT PLASTIC COVER to the INSTALLATION HOLE IO 00505
Download Pdf Manuals
Related Search