Home

FCS-3071 2-Megapixel PoE Dome Network Camera User Manual

1. 58 4 3 3 15 2 User Information The User Information function can be found under this path System gt User Information Blievelone TT A Lem Log View information a get user information artery actory default Software upgrade zz The Administrator can view each added user s login information and privileges refer to Security Get User Information All the users in the network will be listed in the lt User information gt zone as shown below User 4321 It indicates that one user s login username is User and the password is 4321 Get User Privacy Click on lt get user privacy gt at the bottom of the page and the Administrator can view each user s privileges as shown below User 1 1 0 1 1 1 0 1 I O access Camera control Talk Listen refer to Security Therefore it denotes the user is granted privileges of I O access Camera control and Listen 59 4 3 3 15 3 Parameters The Parameters function can be found under this path System gt Parameter Ellevelone TP Tor TL a Mega Pixel Camera Initial Configuration File min shutter speed lt 8 gt ous exposure mode lt auto gt fixed shutter speed lt 56 gt E st tance mace autos white balance rgain lt 57 gt System Network y SEET white balance bgain lt 54 gt brightness value lt 128 gt sharpness value lt 4 gt contrast value lt 64 gt saturation lt 64 gt hie vahi
2. ATW Mode Auto Tracking White Balance With Auto Tracking White Balance function the white balance in a scene will be automatically adjusted while temperature color is changing The ATW Mode is suitable for environment with light source having color temperature in the range roughly from 2500 10000K Manual Mode In this mode users can change the White Balance value manually Users can select a number between 0 127 of Rgain Bgain item to gain the red blue illuminant on the Live Video Panel 78 4 5 3 Picture Adjustment The Picture Adjustment can be found under this path Camera gt Picture Adjustment Picture Adjustment a Brightness Default v L Sharpness Default L Contrast Default v L Saturation Default e L Hue Default y L Brightness Users can adjust the image s brightness by adjusting the item Please select ranging from 12 to 13 To increase video brightness select a bigger number Click on lt gt to confirm the new setting Sharpness Increasing the sharpness level can make the image looked sharper especially enhance the object s edge Please select ranging from 0 to 15 Click on lt gt to confirm the new setting Contrast Camera image contrast level is adjustable please select ranging from 6 to 19 Click on lt y gt to confirm the new setting Saturation Camera image saturation level is adjustable please select ranging from 6 to 19 Click on lt y gt
3. Digital Dat the add on and want to install it click here Information Bar Help El levelone Home System Streaming Camera Logout E Internet Explorer Security Warning Do you want to install this software Name install cab Publisher Digital Data Communications Asia Co Ltd sl More options Don t Install While files from the Internet can be useful this file type can potentially harm your computer Only install software from publishers you trust What s the risk Click Finish to close the DC Viewer window when download is finished For the detailed software download procedure please refer to Appendix B DC Viewer Download Procedure 13 Once login to the IP Camera users will see the Home page as shown below Ellevelone a Languages 2012 08 21 06 H Video format H 264 1 H 264 2 H 264 3 H 264 4 2 08 DU 4 4 0 1 e MJPEG bitrate middle compression middle quality H 264 1 bitrate 4096 kbps middle compression H 264 2 bitrate 1024 kbps high compression low quality H 264 3 bitrate 1024 kbps high compression low quality H 264 4 bitrate 1024 kbps high compression low quality 14 4 Operation Configuration The IP Camera is provided with a user friendly browser based configuration interface for video playback and recording In this chapter information about main page introduction system related settings and camera settings will be described in detail 4 1 Bro
4. root ffff 192 168 0 3 GET cgi bin top cgi HTTP 1 Mon Aug 27 09 11 27 2012 root ffff 192 168 0 3 GET cgi bin center cgi HTT Mon Aug 27 09 11 30 2012 root ffff 192 168 0 3 GET cgi bin showdate cgi H Mon Aug 27 09 12 07 2012 root ffff 192 168 0 3 GET cgi bin servermain cgi Mon Aug 27 09 12 11 2012 root ffff 192 168 0 3 GET cgi bin camset cgi HT Mon Aug 27 09 12 11 2012 root ffff 192 168 0 3 GET cgi bin center cgi HTT Mon Aug 27 09 12 13 2012 root ffff 192 168 0 3 GET cgi bin showdate cgi H Mon Aug 27 09 12 20 2012 root ffff 192 168 0 3 GET cgi bin servermain cgi Mon Aug 27 09 12 52 2012 root ffff 192 168 0 3 GET cgi bin videoctrl cgi c Mon Aug 27 09 12 52 2012 root ffff 192 168 0 3 GET cgi bin center cgi HTT Mon Aug 27 09 12 54 2012 root ffff 192 168 0 3 GET cgi bin showdate cgi H Mon Aug 27 09 13 24 2012 root ffff 192 168 0 3 GET cgi bin server_mask cc Mon Aug 27 09 13 29 2012 root ffff 192 168 0 3 GET cgi bin mask cgi maski Mon Aug 27 09 13 32 2012 root ffff 192 168 0 3 GET cgi bin mask cgi mask Ee Mon Aug 27 09 13 36 2012 root ffff 192 168 0 3 GET cgi bin mask cgi mask Mon Aug 27 09 13 36 2012 root ffff 192 168 0 3 GET cgi bin center cgi HTT default o TE Click on the tab to view the system log file The content of the file provides useful information about connections after system boot up
5. View information v fos fue me me it AHTTP Notification server can listen for notification messages from IP Cameras by triggered events Enter the HTTP details which include server name for instance http 192 168 0 1 admin php user name and password in the fields lt Alarm gt triggered and lt Motion Detection gt notifications can be sent to the specified HTTP server Click on lt Save gt when finished Please refer to Application gt Send HTTP notification Motion Detection for HTTP Notification settings 41 4 3 3 9 Motion Detection The Motion Detection setting can be found under this path System gt Motion Detection Motion Detection Motion Detection o off on Motion Detection Setting Sampling pixel interval 1 10 1 Detection level 1 100 10 Sensitivity level 1 100 80 Time interval sec 0 7200 10 Motion detection Triggered Action Network failure detection L Record stream to sd card Motion Detection Windows add delete 7 3 Tampering Send alarm message by FTP Send alarm message by E mail Periodical event Upload image by FTP Upload image by E Mail Send HTTP notification Storage management File Name image jpg Recording A Add date time suffix File location Add sequence number suffix no maximum value View information Add sequence number suffix up to and then start over Factory default Overwrite Software version Software upgrade Maintenance M
6. d Jete Browsing History we d us g History Mf MSN com l Pop up Blocker lessenger Bing Phishing Filter Manage Add ons ons EEE News Entertal Diagnose Connection Problems Lifestyle Make MSN my homepage Windows Update Wednesday May 26 2010 General Local intranet Trusted sites Restricted sites Internet This zone is for Internet websites except those listed in trusted and restricted zones Security level for this zone Custom Custom settings To change the settings click Custom level To use the recommended settings click Default level Custom level Defaut level Reset all zones to default level 5 Ge 82 Step 4 Down the page press Default Level see the figure above and click OK to confirm the setting Close the browser window and open a new one later when accessing the IP Camera ActiveX Controls and Plug ins Settings Step 1 3 Refer to the previous section above Step 4 Down the page press Custom Level see the figure below to change Activex controls and plug ins settings Internet Options General Security Privacy Content Connections Programs Advanced select a zone to view or change security settings Pu E Internet Internet Local intranet Trusted sites Restricted sites Internet This zone is for Internet websites except those listed in trusted and restricted zo
7. silevelone FCS 3071 2 Megapixel POE Dome Network Camera User Manual Ver 1 0 HW Ver 2 0 Table of Contents OVE EW eege eege tddi 1 1 RTE 1 2 Package Contento ane a a a R EE E EE aE EEA ia 1 3 DIMENSION EE 1 4 CONNECT A ee H Systemi REGQUIFGMENES aresoarra aiaa aaia Nee Leen ads 3 1 RECOrding Softwar li cia 3 2 Installing DC Viewer Software Online Operation amp Configuration 4 1 Browser based Viewer Introductlon 4 2 HOME Page iii is 4 2 1 Function Items on Home Page 4 3 EE 4 3 1 SST Min ta as 4 3 2 ECHTEN Ze Eed dE AA diia dt A A tie het E E ceased Eege dee te iet A A E 4 32 33 Idle ad GC D E Eh al 4 3 3 Netwotk A ic A 4 3 3 2 DIOSA teo 43303 SNMP irsin NS A AS KE CET EE os TE 4 3 3 6 gt M i EE Ae Pe Pal ie TIT td 4 3 3 9 Motion DetectioN ccccccccccccncnenencnononenenononencnonononcnrnenenenenenenos 4 3 3 10 Network Failure Detecton EN ALL TAM Buin ii 4 3 3 12 Storage Management Local Recording 4 3 3 13 Recording Local Recording coooccccococcnccononnncnononncnnnnnnnnnncnnns 4 3 3 14 File Location Snapshots and Web Recording oo co 4 3 3015 View Information ii cd O Log TE 58 433152 USSF Intranet 59 E E E le CEET 60 EEN e ele AT 61 4 3 3 17 Software Version A A 62 4 3 3 18 Software Upgrade ups 63 e EC WE ne ln LEE 65 4 4 10 104 ln 66 4 4 1 Video Format Video Resolution and Rotate Type 66 4 4 2 Video Compresion ta 68 4 4 3 Vid
8. The class consists of HTTP traffic Web browsing NOTE To enable this function please make sure the switches routers in the network support QoS 4 3 3 3 SNMP The SNMP Simple Network Management Protocol setting can be found under this path System gt Network gt SNMP SNMP v1 v2 Enable SNMP v1 Enable SNMP v2 Read Community public Write Community private Traps for SNMP v1 v2 Enable traps Trap address Trap community Trap Option Warm start With Simple Network Management Protocol SNMP support the IP Camera can be monitored and managed remotely by the network management system 33 SNMP vil v2 Enable SNMP v1 v2 Select the version of SNMP to use by checking the box Read Community Specify the community name that has read only access to all supported SNMP objects The default value is public Write Community Specify the community name that has read write access to all supported SNMP objects except read only objects The default value is write Traps for SNMP v1 v2 Traps are used by the IP Camera to send massages to a management system for important events or status changes Enable Traps Check the box to activate trap reporting 9 Trap address Enter the IP address of the management server Trap community Enter the community to use when sending a trap message to the management system Trap Option Warm Start A Warm Start SNMP trap
9. The setting range is from 1 frame to 15 frames NOTE Make sure FTP configuration has been completed Refer to FTP for further details Upload Image by E Mail Select this item and the Administrator can assign an e mail address and configure various parameters When tampering is detected event images will be sent to the appointed e mail address lt Pre trigger buffer gt function allows users to check what happened to cause the trigger The lt Pre trigger buffer gt frame rate could be pre determined On the other hand lt Post trigger buffer gt is for users to upload certain amount of images after tampering occurs Check the box lt Continue image upload gt to upload the triggered images during certain time or keep uploading until the trigger is off Select lt Upload for __sec gt and enter the duration in the blank The images of the duration will be uploading by E mail when tampering is triggered The setting range is from 1 to 9999 seconds Select lt Upload during the trigger active gt to make the images keep being upload to E mail during the trigger active until tampering stops Set the Image frequency as the upload frame rate The setting range is from 1 frame to 20 frames 52 NOTE Make sure SMTP configuration has been completed Refer to Mail for further details Send HTTP notification Check this item select the destination HTTP address and specify the parameters for HTTP notifications When the Tampering Alarm
10. to confirm the new setting Hue Camera image hue level is adjustable please select ranging from 12 to 13 Click on lt y gt to confirm the new setting 79 4 3 4 Backlight The Backlight Setting can be found under this path Camera gt Backlight Backlight Off e The Backlight Compensation function prevents the center object from being too dark in surroundings where excessive light is behind the center object Click on lt gt to confirm the new setting 4 3 5 Digital Zoom The Digital Zoom Setting can be found under this path Camera gt Digital Zoom Digital Zoom Off e The camera s digital zoom is adjustable from x2 to x8 Click on lt gt to confirm the new setting 4 3 6 WDR Function The WDR Function Setting can be found under this path Camera gt WDR Function WDR Function Hi y The Wide Dynamic Range WDR function is for solving high contrast or changing light issues so that enhances better video display The WDR is adjustable from Low Mid to Hi Higher level of WDR represents wider dynamic range so that he IP Camera can catch a greater scale of brightness Click on lt gt to confirm the new setting 4 3 7 Noise Reduction The Noise Reduction Setting can be found under this path Camera gt Noise Reduction Noise Reduction SPQ D The IP Camera provides multiple lt Noise Reduction gt options for delivering optimized image quality especially in extra low light conditions 80 Different l
11. Shell Extension 18 PL 2303 USB to Serial LO4MB P Renesas Flash Development Toolkit v4 05 Ce 78 67MB_ 7 87 Step 3 Select Networking Services from the Components list in the Windows Components Wizard window and then click Details Windows Components Wizard Windows Components You can add or remove components of Windows lt P To add or remove a component click the checkbox A shaded box means that only part of the component will be installed To see what s included in a component click Details Components w MSN Explorer 20 7MB al Other Network File and Print Services 0 0 MB EI wi K Dutlook Express 0 0 MB wl FEAL Indate Rant Fertificates nome 7 Description Contains a variety of specialized network related services and protocols Total disk space required 56 5 MB 7 Details Space available on disk 14365 1 MB Dee Co o Gest Step 4 Select UPnP User Interface in the Networking Services subcomponents list and then click OK To add or remove a component click the check box A shaded box means that only part of the component will be installed To see what s included in a component click Details Subcomponents of Networking Services A Internet Gateway Device Discovery and Control Client O 3 Peer to Peer O RIP Listener O 3 Simple TCP IP Services nf Description Displays icons in My Network Places for UPnP devices detected on the network A
12. and reaction to such events by sending out notifications or uploading snapshots to the specified destination s Detection of camera tampering is achieved by measuring the differences between the older frames of video which are stored in buffers and more recent frames Tampering Alarm Users are able to turn on off Tampering Alarm function in Tampering Alarm setting page The default setting is Off 50 Tampering Duration Minimum Tampering Duration is the time for video analysis to determine whether camera tampering has occurred Minimum Duration could also be interpreted as defining the Tampering threshold longer duration represents higher threshold Settable Tampering Duration time range is from 10 to 3600 seconds The Default value is 20 seconds Triggered Action Multi option The Administrator can specify alarm actions that will take when tampering is detected All options are listed as follows Enable Alarm Output Check the item and select the predefined type of alarm output to enable alarm output when tampering is detected Record stream to SD Card Select this item and the Tampering Alarm recording will be stored in Micro SD SDHC card when tampering is detected Pre trigger buffer recording function allows users to check what happened to cause the trigger The pre trigger buffer time range is from 1 to 3 seconds Select lt Upload for sec gt to set the recording duration after tampering occurs The setting range i
13. is 14 characters The new user will be displayed in the user name list There is a maximum of twenty user accounts Each user can be assigned the privileges of Camera control Talk and Listen I O access This item supports fundamental functions that enable users to view video when accessing to the camera Camera control This item allows the appointed User to change camera parameters on the Camera Setting page Talk Listen Talk and Listen functions allow the appointed user in the local site PC site communicating with for instance the administrator in the remote site Manage User Delete user To delete a user pull down the user list and select the user name you wish to delete Then click on lt Delete gt to remove it Edit user Pull down the user list and select a user name Click on lt Edit gt to edit the user s password and privilege NOTE It is required to enter the User password as well as check the function items which will be available for the user When finished click on lt Save gt to modify the account authority 22 4 3 2 2 HTTPS The HTTPS setting can be found under this path System gt Security gt HTTPS Ellevelone Tr EE e IA Create self signed certificate Install signed certificate ames Create Certificate Request P filter IEEE 802 1X Upload signed certificate Created Request Subject fut i No certificate request created Installed Certificate S
14. o ET 70 4 4 4 Video OCX POT CO msn 72 4 4 5 Video Frame Rate ninia RA 73 4 4 6 Video Mastin 74 4 5 KE et EE Ee ee EEN 76 4 5 1 Beie Ten 77 4 5 2 White Balance Sete inte iia 78 4 5 3 Picture AUS MN ui tinenti ueripn dee EEan ESENE RE EENEN E AOINE KESE 79 4 3 4 A A II A Ee aE 80 4 3 5 Digital A en 80 4 3 6 WDR FUNGUON usina 80 4 3 7 e E 80 4 3 8 TV System EE e le TEE 81 4 4 e ie E 81 Appendix A Internet Security Settines c scicniiicanii ii 82 Appendix B DC Viewer Download Procedure EE 85 Appendix C Install UPnP Components EE 87 Default ID Password Login ID Password root 1 Overview The LevelOne FCS 3071 is a compact rugged H 264 2 Megapixel PoE Mini Dome Camera designed for tough environments The casing is tamper resistant it can withstand vibration humidity dust and fluctuating temperatures for example in buses and trains The FCS 3071 is a palm sized discreet network camera specifically designed for mass transit vehicles The flat tamper resistant casing makes it ideal for installation The IP66 rating provides a rugged package for both indoor and outdoor applications In compatible with EN50155 the standard for electronic equipment operating in railway vehicles the FCS 3071 is an economical mobile surveillance solution with high reliability and rugged performance The FCS 3071 utilizes PoE Power over Ethernet allowing it to be operated and powered from a single Ethernet cable giving greater ease
15. signifies that the SNMP device i e IP Camera performs software reload Click on lt Save gt button when complete 34 4 3 3 4 UPnP The UPnP setting can be found under this path System gt Network gt UPnP Elievelone TT UPnP Setting Y Enable UPnP Enable UPnP port forwarding Friendly name FCS 3071 V2_ UPnP Setting Enable UPnP When the UPnP is enabled whenever the IP Camera is presented to the LAN the icon of the connected IP Cameras will appear in My Network Places to allow for direct access f NOTE To enable this function please make sure the UPnP component is installed on your computer Please refer to Install UPnP components for UPnP component installation procedure 35 Enable UPnP port forwarding When the UPnP port forwarding is enabled the IP Camera is allowed to open the web server port on the router automatically NOTE To enable this function please make sure that your router supports UPnP and it is activated Friendly name Set the name for the IP Camera for identity 36 4 3 3 5 DDNS The DDNS setting can be found under this path System gt DDNS Ellevelone TP a A Dynamic DNS Use Dynamic DNS If You Want To Use Your DDNS Account E Enable DDNS Provider DynDNS org Dynamic Y Host name Username E mail Password Key a CO me re me FEE tt Dynamic Domain Name System DDNS allows a host name to be constantly
16. the trigger is off NOTE Please make sure the local recording with Micro SD SDHC card AN is activated so that this function can be implemented Refer to Recording for further details Send Alarm Message by FTP E Mail The Administrator can select whether to send warning messages by FTP and or E Mail when motion is detected Upload Image by FTP Select this item and the Administrator can assign a FTP site and configure various parameters When motion is detected event images will be uploaded to the appointed FTP site lt Pre trigger buffer gt function allows users to check what happened to cause the trigger The lt Pre trigger buffer gt frame rate could be pre determined On the other hand lt Post trigger buffer gt is for users to upload certain amount of images after motion event occurs Check the box lt Continue image upload gt to upload the triggered images during certain time or keep uploading until the trigger is off Select lt Upload for __sec gt and enter the duration in the blank The images of the duration will be uploaded to FTP when the motion event occurs The setting range is from 1 to 9999 seconds Select lt Upload during the trigger active gt to make the images keep being uploaded to FTP during the trigger active until the event stops Set the Image frequency as the upload frame rate The setting range is from 1 frame to 15 frames NOTE Make sure FTP configuration has been completed Refer to FTP AN for furt
17. 0 GHz 2 2GB RAM or more Operating System Windows VISTA Windows XP Windows 7 Web Browser Microsoft Internet Explorer 6 0 or later Firefox Chrome Safari Network Card 10Base T 10 Mbps or 100Base TX 100 Mbps operation Viewer ActiveX control plug in for Microsoft IE 3 Accessing Camera For initial access to the IP Camera users can search the camera through the installer program DeviceSearch exe which can be found in DeviceSearch folder in the supplied CD Device Search Software Step 1 Double click on the program Device Search exe see the icon below its window will appear as shown below Then click the Device Search button ae E ET Device Search 1 0 0 27 Cuy Search Method e Local Broadcast Port Netmask Step 2 The security alert window will pop up Click Unblock to continue 2 Windows Security Alert E To help protect your computer Windows Firewall has blocked some features of this program Do you want to keep blocking this program ki Name DeviceSearch Publisher Unknown Windows Firewall has blocked this program from accepting connections from the Internet or a network If you recognize the pragen or trust the publisher you can unblock it When should unblock a program Step 3 Click Device Search again and all the finding IP devices will be listed in the page as shown in the figure below The IP Camera s defaul
18. 1024 to 65535 HTTPS port The default setting of HTTPS Port is 443 the setting range is from 1024 to 65535 NOTE Be aware to choose the different port from the one set for the web server d y port IPv6 Address Configuration With IPv6 support users can use the corresponding IPv6 address for browsing Enable IPv6 by checking the box and click on lt Save gt to complete the setting 31 4 3 3 2 QoS The QoS Quality of Service setting can be found under this path System gt Network gt QoS Ellevelone Ta DSCP Settings fewer IO Audio DSCP 0 Basic Management DSCP 0 Tampering d v Periodical event Software version AAA Y QoS allows providing differentiated service levels for different types of traffic packets which guarantees delivery of priority services especially when network congestion occurs Adapting the Differentiated Services DiffServ model traffic flows are classified and marked with DSCP DiffServ Codepoint values and thus receive the corresponding forwarding treatment from DiffServ capable routers DSCP Settings The DSCP value range is from 0 to 63 The default DSCP value is 0 which means DSCP is disabled The IP Camera uses the following QoS Classes Video Audio and Management Video DSCP The class consists of applications such as MJPEG over HTTP RTP RTSP and RTSP HTTP 32 Audio DSCP This setting is only available for the IP Cameras that support audio Management DSCP
19. Enable automatic disk cleanup Sem elvan Device type SD card Network 2 Free space 0 KB Total size 0 KB oons Status No Full No m device sein AP Format device per ie enna sting Remove recordings older than Network failure de Tampering Remove oldest recordings when disk is 85 full Tampering Recording list FileName size renove Sart downoad Users can implement local recording to the Micro SD SDHC card up to 32GB This page shows the capacity information of the Micro SD card and a recording list with all the recording files saved on the memory card Users can also format the SD card and implement automatic recording cleanup through the setting page To implement Micro SD card recording please go to the lt Recording gt page refer to Recording for activation NOTE Please format the Micro SD SDHC card when using for the first time AN Formatting will also be required when a memory card already being used on one camera and later transferred to another camera with different software platform Device information When users insert the Micro SD SDHC card the card information such as the memory capacity and status will be shown at Device Information section For the memory card being successfully installed its status shall be shown at lt Device information gt section in the Storage Management page Device setting Click on the lt Format gt button to format the memory card Disk c
20. The default setting is C Once confirm the setting click on lt Save gt and all the snapshots and web recording will be saved in the designate location NOTE Please make sure the selected file path contains valid characters such as letters and numbers NOTE For users with Windows 7 operating system it is required to log on as an Administrator to implement the Snapshot and Web Recording function 57 4 3 3 15 View Information The View Information function can be found under this path System gt View Information Click on the category lt View Information gt there will be a drop down menu with tabs including lt Log File gt lt User Information gt and lt Parameters gt 5 3 3 15 1 Log File The Log File function can be found under this path System gt Log File Ellevelone Trono ss ones AS System log Mon A Aug 27 08 33 00 2012 Network interface initialized start Mon Aug 27 08 33 01 2012 Network interface initialized end amt Mon Aug 27 08 33 01 2012 Host IP 192 168 0 22 Mon Aug 27 08 33 01 2012 Subnet Mask 255 255 255 0 me Mon Aug 27 08 33 01 2012 Gateway 192 168 0 1 Mon Aug 27 08 33 01 2012 MAC address 00 D0 89 0A 3D 69 man Mon Aug 27 09 11 25 2012 root ffff 192 168 0 3 GET HTTP 1 1 d Mon Aug 27 09 11 27 2012 root ffff 192 168 0 3 GET cgi bin ret cgi HTTP 1 TPO Mon Aug 27 09 11 27 2012 root ffff 192 168 0 3 GET cgi bin setlogout cgi H Mon Aug 27 09 11 27 2012
21. Video Frame Rate MJPEG Frame Rate Setting MJPEG frame rate 30 H264 1 Frame Rate Setting H264 1 frame rate 15 H264 2 Frame Rate Setting H264 2 frame rate 15 H264 3 Frame Rate Setting H264 3 frame rate 30 H264 4 Frame Rate Setting H264 4 frame rate 30 Video frame rate is for setting the frames per second fps if necessary MJPEG H 264 1 H 264 2 H 264 3 H 264 4 Frame Rate The default setting of MJPEG H 264 1 H 264 2 H 264 3 H 264 4 Frame Rate is 30 fps the setting range is from 1 to 30 Click on lt Save gt to confirm the setting AN NOTE Lower frame rate will decrease video smoothness 73 4 4 6 Video Mask The Video Mask setting can be found under this path Streaming gt Video Mask Active Mask Function Enable to display Maski Enable to display Mask Enable to display Mask Enable to display Mask4 Enable to display Mask5 Mask Setting Mask color Active Mask Function Add a Mask Check a Video Mask checkbox and a red frame will come out in the Live Video panel at the right side Use the mouse to drag and drop to adjust the mask s size and place it on the target zone AN NOTE It is suggested to set the Video Mask twice bigger than the object Cancel a Mask Uncheck the checkbox of the Video Mask meant to be deleted and the selected mask will disappear from the Live Video pane instantly Mask Setting 74 Mask colo
22. amera AAA Recording Schedule 9 Disable O Always Only during time frame Weekday Starttime Duration H l b Start time 00 00 Duration 00 00 E JE Software upgrade In the Recording setting page the Micro SD Card recording schedule supports up to ten sets of time frames User can specify the recording schedule to fit the present surveillance requirement Activating Micro SD SDHC Card Recording Two types of schedule mode are offered lt Always gt and lt Only during Time Frame gt Users can select lt Always gt to activate Micro SD SDHC Card Recording all the time Or select a set of schedule from the time frame blank check specific weekdays and setup the start time hour minute and time period hour minute to activate Micro SD SDHC Card Recording at certain time frames The setting range for time period hour is from 0 to 168 Please click on lt Save gt to save the setup Terminating Micro SD SDHC Card Recording Select lt Disable gt to terminate the recording function 56 4 3 3 14 File Location Snapshots and Web Recording The File Location setting can be found under this path System gt File Location Ellevelone PT AS Security Set the destination of snapshot photos and recorded video files All files stored at C i 4 dE ill il f AL l Users can specify a storage location on the PC or in the hard drive for the snapshots and live video recording
23. are CD also contains recording software IP CamSecure allowing simultaneous monitoring and video recording for multiple network cameras Please install the recording software then launch the program to add the Network Camera to the Channel list For detailed information about how to use IP CamSecure please refer to the user s manual of the software or download it at http global level1 com 12 3 2 Installing DC Viewer Software Online For the initial access to the IP Camera a client program DC Viewer will be automatically installed to your PC when connecting to the IP Camera If the Web browser doesn t allow DC Viewer installation please check the Internet security settings or ActiveX controls and plug ins settings see Appendix A Internet Security Settings to continue the process The Information Bar just below the URL bar may come out and ask for permission to install the ActiveX Control for displaying video in browser see the figure below Right click on the Information Bar and select Install ActiveX Control to allow the installation 2 network HD Camera Windows Internet Explorer eT e htto 192 168 0 144 4311411 Dive P I File Edit View Favorites Tools Help ve Favorites Ja E y E Free Hotmail 7 E gt SS S 192 168 0 147 Bing network HD Camera tir GB i mp Page gt Safety Tools Le This website wants to install the following add on install cab from
24. creen Step 7 Click lt OK gt to close the Internet Options screen Step 8 Close the browser window and restart a new one later for accessing the IP Camera 84 Appendix B DC Viewer Download Procedure The procedure of DC Viewer software download is specified as follows Step 1 In the DC Viewer installation page click Next for starting installing Welcome to the InstallShield Wizard for DCYiewer The Installshield R Wizard will install DCViewer on your computer To continue click Next WARNING This program is protected by copyright law and international treaties fe OGViewer InstallShield Wizard Installing DC iewer The program features you selected are being installed a Please wait while the InstallShield Wizard installs DCYiewer This may take several minutes Status InstallShield Ces 85 Step 3 Click Finish to close the DC Viewer installation page InstallShield Wizard Completed The InstallShield Wizard has successfully installed DCViewer Click Finish to exit the wizard 2011 01 24 14 50 Video format MJPEG O H 264 217 12 Fut ek lei ele MJPEG bitrate middle compression middle quality H 264 bitrate 4096kbps middle compression 86 Appendix C Install UPnP Components Please follow the instructions below to install UPnP components Step 1 Go to Start click on Control Panel and then double click A
25. d like to change its network property On the selected item right click and select Network Setup Meanwhile record the IP Camera s MAC address for future identification ET Device Search 1 0 0 27 Search Method Project Filter E 1 device s found Local Broadcast Port Netmask Mac FCS 1141 MegaPixelCamera 192 168 5Q 142 gN 1256 265 255 0 00 11 68 05 31 4C Detail Info Network Setup Step 2 The Network Setup page will come out Select DHCP and press Apply button down the page 10 Device Information Model esu Project fos 1141 Name MegaPixelCamera MAC 100 D0 89 05 31 4C Network Property Static IP PAddress 1192 168 50 143 Gateway fo 0 0 0 Netmask 1255 255 255 0 DNS Step 3 Click OK on the Note of setting change Wait for one minute to re search the IP Camera Control package sent Please try to re search the device after one minute Step 4 Click the Device Search button to re search all the devices Then select the IP Camera with the correct MAC address Double click on the IP Camera and the login window will appear A A earch Method Project Filter 1 device s found ALL v Search Upnp FCS 1141 MegaPixelCamera 192 168 50 143 80 255 255 255 0 00 11 68 05 31 4C Step 5 Enter User name and Password to access the IP Camera 11 3 1 Recording Software The product softw
26. dd or Remove Programs File Edit View Favorites Tools Help ITA a E gt Control Panel CS ses SZ Tree E Thumbnails m Icons etais sss THe FP folder Op New Folder Z ontrol Panel Pick a category E Switch to Classic View SCH Se Appearance and Themes Printers and Other Hardware See Also Windows Update y User Accounts EI Help and Support a Other Control Panel Options Date Time Language and Regional Options Step 2 Click on Add Remove Windows Components in the Add or Remove Programs page JA ir RE Muelas Gi Currently installed programs E Show updates Sort by Name y Change or y E hinges dk uTorrent 021MB Fragaria 13 Alky for Applications Windows XP 2 65MB i Atomic Alarm Clock 5 4 5 14MB CCleaner remove only 0 98MB Gadget Installer 0 41MB Ki IconPackager 3 62MB Add Remove 9 30MB Windows Java TM 6 Update 5 137 00MB Components 5 Microsoft MET Framework 1 1 D 13 Microsoft NET Framework 2 0 Service Pack 2 ize 185 00MB Set Program B Microsoft NET Framework 3 0 Service Pack 2 173 00MB Access and Defaults 13 Microsoft NET Framework 3 5 SPL ize 28 22MB 83 Microsoft Office 2007 Recent Documents Gadget 0 46MB 23 Microsoft Office Professional Edition 2003 204 00MB GB Microsoft User Made Driver Framework Feature Pack L0 13 Microsoft Visual C 2005 Redistributable 5 21MB G Microsoft Windows Sitti SE 3 77MB EX Open Command Prompt
27. download of DC Viewer 64 4 3 3 19 Maintenance The Maintenance setting can be found under this path System gt Maintenance Ellevelone Ta Security wel Export Files Export configuration files Upload Files Select configuration files a im M Software upgrade Users can export configuration files to a specified location and retrieve data by uploading an existing configuration file to the IP Camera Export Users can save the system settings by exporting the configuration file bin to a specified location for future use Click on the lt Export gt button and the popup File Download window will come out as shown below Click on lt Save gt and specify a desired location for saving the configuration file Upload To copy an existing configuration file to the IP Camera please first click on lt Browse gt to select the configuration file and then click on the lt Upload gt button for uploading 4 4 Streaming Under the tab lt Streaming gt there are submenus including lt Video Format gt lt Video Compression gt lt Video ROI gt lt Video OCX Protocol gt lt Video Frame Rate gt lt Video Mask gt and lt Audio gt In the Streaming submenus the Administrator can configure specific video resolution video compression mode video protocol audio transmission mode etc Further details of these settings will be specified in the following sections 4 4 1 Video Format Video Resolution and Ro
28. e lt 12R gt 4 Click on this item to view the entire system s parameter setting such as Camera Settings Mask Information and Network Information 60 4 3 3 16 Factory Default The Factory Default setting can be found under this path System gt Factory Default Fievelone TP o ows Js A Restore factory settings and lose any changes System will restart and need installer program to setup network v i 3 Full Restore Restore factory settings excluding network settings Partial Restore i Reboot the system Network fare detection Storage management Software version Users can follow the instructions on this page to reset the IP Camera to factory default setting if needed Set Default Click on the lt Set Default gt button to recall the factory default settings Then the system will restart in 30 seconds AN NOTE The IP address will be restored to default Reboot Click on the lt Reboot gt button and the system will restart without changing current settings 61 4 3 3 17 Software Version The Software Version can be found under this path System gt Software Version Flie mE e System Software version The software version is le20120821NSA The current software version is displayed in the software version page 62 4 3 3 18 Software Upgrade The Software Upgrade setting can be found under this path System gt Software Upgrade II gt ETE Follow These Steps To D
29. eral O Get IP address automatically 9 Use fixed IP address IP address 192 168 0 22 Subnet mask 255 255 255 0 Default gateway 192 168 0 1 Primary DNS 168 95 1 1 Secondary DNS 0 0 0 0 Use PPPoE User name Password l Advanced Web Server port 80 RTSP port 554 MJPEG over HTTP port 8008 HTTPS port 443 i IPv6 Address Configuration Y Enable IPv6 Address fe80 2d0 89ff fe0a 3d69 64 Users can choose to connect to the IP Camera with fixed or dynamic DHCP IP address The IP Camera also provides PPPoE support for users who connect to the network via PPP over Ethernet PPPoE General 29 Get IP address automatically DHCP The camera s default setting is lt Use fixed IP address gt If select lt Get IP address automatically gt after the IP Camera restarts users can search it through the installer program DeviceSearch exe which can be found in DeviceSearch folder in the supplied CD NOTE Please make the record of the IP Camera s MAC address which can be found in the label of the camera for identification in the future Use fixed IP address To setup static IP address select lt Use fixed IP address gt and move the cursor to the IP address blank and insert the new IP address ex 192 168 7 123 then go to the Default gateway explained later blank and change the setting ex 192 168 7 254 Click on lt Save gt to confirm the new setting When using static IP address to login t
30. ersion IEEE 802 1X EAP TLS CA certificate Upload CA certificate Client certificate Jg Upload Client certificate Private key ale Upload Private key Settings Identity Private key password E Enable IEEE 802 1X The IP Camera is allowed to access a network protected by 802 1X EAPOL Extensible Authentication Protocol over LAN Users need to contact with the network administrator for gaining certificates user IDs and passwords CA Certificate 27 The CA certificate is created by the Certification Authority for the purpose of validating itself Upload the certificate for checking the server s identity Client Certificate Private Key Upload the Client Certificate and Private Key for authenticating the IP Camera itself Settings Identity Enter the user identity associated with the certificate Up to 16 characters can be used Private Key Password Enter the password maximum 16 characters for your user identity Enable IEEE 802 1X Check the box to enable IEEE 802 1X Click on lt Save gt to save the IEEE 802 1X EAP TLS setting 28 4 3 3 Network The Network setting can be found under this path System gt Network Click on the lt Network gt category there will be a drop down menu with tabs including lt Basic gt lt Q0S gt lt SNMP gt and lt UPnP gt 4 3 3 1 Basic The Basic setting can be found under this path System gt Network gt Basic Ellevelone a en Gen
31. erver Port Account Name Password and E mail Address settings Check the box SMTP SSL to send emails via encrypted transmission For SMTP server contact your network service provider for more specific information 39 4 3 3 7 FTP The FTP setting can be found under this path System gt FTP 1st FTP server 1st FTP server port 21 1st FTP user name 1st FTP password 1st FTP remote folder ist FTP passive mode 2nd FTP server 2nd FTP server port 21 2nd FTP user name 2nd FTP password 2nd FTP remote folder 1 2nd FTP passive mode Storage management DE if The Administrator can set as sending alarm message to a specific File Transfer Protocol FTP site when event is triggered Users can assign alarm message to up to two FTP sites Enter the FTP details which include server server port user name password and remote folder in the fields Check the box passive mode to be connected with the FTP server by passively receiving the FTP server s IP address through a dynamic port Alternatively uncheck the box to directly connect the FTP server via active mode Click on lt Save gt when finished 40 4 3 3 8 HTTP The HTTP setting can be found under this path System gt HTTP Ellevelone THEN HTTP S 3 1st HTTP server 1st HTTP user name 1st HTTP password 2nd HTTP server 2nd HTTP user name 2nd HTTP password 3
32. etting can be found under this path Streaming gt Video ROI Video Format Video ROI Video Compression Video ROI setting Video RO Enable stream 2 ROI setting Enable stream 3 ROI setting Video OCX Protocol Enable stream 4 ROI setting Video Frame Rate Video Mask ROI stands for Region of Interest This function allows users to select specific monitoring region for 2nd 3rd and 4th streams instead of showing the full image AN NOTE This function is only available when triple streams or above is selected under Video Resolution in Video Format Setting Video ROI Setting Enable Stream 2 ROI Setting Check the box and Stream 2 ROI Window will be displayed To change the size of Stream 2 ROI Window move the mouse cursor to the edge of the frame and draw it outward inward Moving the mouse to the center of the frame can shift the frame to the intended location Enable Stream 3 ROI Setting Check the box and Stream 3 ROI Window will be displayed To change the size of Stream 3 ROI Window move the mouse cursor to the edge of the frame and draw it outward inward Moving the mouse to the center of the frame can shift the frame to the intended location Enable Stream 4 ROI Setting Check the box and Stream 4 ROI Window will be displayed To change the size of Stream 4 ROI Window move the mouse cursor to the edge of the frame and draw it outward inward Moving the mouse to the center of the frame can shift the frame to the inte
33. evel options for 3D Noise Reduction 3DNR include Low Mid and High Higher level of 3DNR generates relatively enhanced noise reduction The proprietary Smart Picture Quality SPQ video processing method could drastically minimum motion blur and reduce noise especially in low light environment The combination of SPQ and 3DNR at different level further yields exceptional video performance in various conditions The Noise Reduction function is configurable with the following options 3DNR Low 3DNR Mid 3DNR Hi SPQ SPQ 3DNR Low SPQ 3DNR Mid to SPQ 3DNR Hi Click on lt gt to confirm the new setting 4 3 8 TV System Setting The TV System Setting can be found under this path Camera gt TV System TV System 30 fps NTSC e Select the video format that matches the present TV system Click on lt gt to confirm the new setting 4 4 Logout Click on the tab lt Logout gt on the top of the page and the login window will pop up This enables log in with another user name 81 Appendix A Internet Security Settings If ActiveX control installation is blocked please either set Internet security level to default or change ActiveX controls and plug ins settings Internet Security Level Default Step 1 Start the Internet Explorer IE Step 2 Select lt Tools gt from the main menu of the browser Then Click lt Internet Options gt es EI http www msn com st L File Edit View Favorites Help
34. f the custom parameter is set as action 1 amp group 2 and the HTTP server name is http 192 168 0 1 admin php the notification will be sent to HTTP server as http 192 168 0 1 admin php action 1 amp group 2 when alarm is triggered File Name Enter a file name in the blank ex image jpg The uploaded image s file name format can be set in this section Please select the one that meets your requirements Add date time suffix File name image YYMMDD_HHNNSS_XX jpg Y Year M Month D Day H Hour N Minute S Second X Sequence Number 46 Add sequence number suffix no maximum value File name imageXXXXXXxX jpg X Sequence Number Add sequence number suffix up to and then start over File Name imageXX jpg X Sequence Number The file name suffix will end at the number being set For example if the setting is up to 10 the file name will start from 00 end at 10 and then start all over again Overwrite The original image in the FTP site will be overwritten by the new uploaded file with a static filename Save Click on the lt Save gt button to save all the Motion Detection settings mentioned above 47 4 3 3 10 Network Failure Detection Ellevelone Tor gt Detection Switch Off On Detection Type Ping the IP address 0 0 0 0 every 1 minutes Triggered Action E Record stream to sd card Send message by FTP Send message by E Mail E sary
35. her details Upload Image by E Mail Select this item and the Administrator can assign an e mail address and configure 45 various parameters When motion is detected event images will be sent to the appointed e mail address lt Pre trigger buffer gt function allows users to check what happened to cause the trigger The lt Pre trigger buffer gt frame rate could be pre determined On the other hand lt Post trigger buffer gt is for users to upload certain amount of images after the motion event occurs Check the box lt Continue image upload gt to upload the triggered images during certain time or keep uploading until the trigger is off Select lt Upload for __sec gt and enter the duration in the blank The images of the duration will be uploading by E mail when the motion event occurs The setting range is from 1 to 9999 seconds Select lt Upload during the trigger active gt to make the images keep being uploaded to E mail during the trigger active until the event stops Set the Image frequency as the upload frame rate The setting range is from 1 frame to 15 frames NOTE Make sure SMTP configuration has been completed Refer to Mail AN for further details Send HTTP notification Check this item select the destination HTTP address and specify the parameters for event notifications by lt Motion Detection gt triggered When an alarm is triggered the notification can be sent to the specified HTTP server For instance i
36. ically according to the light intensity It is also effective if a fixed iris lens is being used The minimum shutter speed range is configurable from 1 1 1 5 to 1 500 1 425 sec Manual Mode Fixed Shutter Mode In this mode fixed shutter speed could be selected from the dropdown menu The shutter speed range is from 1 10000 to 1 1 1 5 sec with 19 18 options Users could select suitable shutter soeed according to the environmental illumination 77 4 5 2 White Balance Setting The White Balance Setting can be found under this path Camera gt White Balance White Balance a o Auto ATW Manual Rgain 0 127 Bgain 0 127 A camera needs to find reference color temperature which is a way of measuring the quality of a light source for calculating all the other colors The unit for measuring this ratio is in degree Kelvin K Users can select one of the White Balance Control modes according to the operating environment The following table shows the color temperature of some light sources for reference Click on lt gt to confirm the new setting Light Sources Color Temperature in K Cloudy Sky 6 000 to 8 000 Noon Sun and Clear Sky 6 500 Household Lighting 2 500 to 3 000 75 watt Bulb 2 820 Candle Flame 1 200 to 1 500 Auto Mode Auto White Balance The Auto White Balance mode is suitable for environment with light source having color temperature in the range roughly from 2700 7800K
37. is as described in the following chapter El levelone Home System Streaming Camera Languages 2012 08 21 06 47 Video format H 264 1 H 264 2 H 264 3 O H 264 4 x1 x12 DU 9 4 aj a e MJPEG bitrate middle compression middle quality H 264 1 bitrate 4096 kbps middle compression H 264 2 bitrate 1024 kbps high compression low quality H 264 3 bitrate 1024 kbps high compression low quality H 264 4 bitrate 1024 kbps high compression low quality 4 2 1 Function Items on Home Page Multiple Languages Support Multiple languages are supported including German English French Italian Simplified Chinese Traditional Chinese Russian for the viewer window interface Digital Zoom Control In the full screen mode users can implement digital PTZ by rotating the mouse wheel for zoom in out and drag the mouse into any direction 17 Screen Size Adjustment 1 1 2 Image display size can be adjusted to x1 2 and full screen Snapshot button amp Click on the button and the JPEG snapshots will automatically be saved in the appointed place The default place of saving snapshots is CA To change the storage location please refer to File Location for further details NOTE For users with Windows 7 operating system it is required to log on as an Administrator to implement the Snapshot function Video Streaming Pause Restart button pause restart Click on the lt
38. is triggered the HTTP notifications can be sent to the specified HTTP server For instance if the custom parameter is set as action 1 amp group 2 and the HTTP server name is http 192 168 0 1 admin php the notification will be sent to HTTP server as http 192 168 0 1 admin php action 1 amp group 2 when alarm is triggered File Name Enter a file name in the blank ex image jpg The uploaded image s file name format can be set in this section Please select the one that meets your requirements Add date time suffix File name imageYYMMDD_HHNNSS_XX jpg Y Year M Month D Day H Hour N Minute S Second X Sequence Number Add sequence number suffix no maximum value File name imageXXXXXXX jpg X Sequence Number Add sequence number suffix up to and then start over File Name imageXX jpg X Sequence Number The file name suffix will end at the number being set For example if the setting is up to 10 the file name will start from 00 end at 10 and then start all over again Overwrite The original image in the FTP site will be overwritten by the new uploaded file with a static filename Save Click on the lt Save gt button to save all the Tampering Alarm settings mentioned above 53 4 3 3 12 Storage Management Local Recording The Storage Management setting can be found under this path System gt Storage Management Fllevelone To am System Storage Management
39. ld Then select an update interval from the drop down menu For further information about NTP please refer to the web site www ntp org 20 4 3 2 Security The Security setting can be found under this path System gt Security Click on the Security category there will be a drop down menu with tabs including lt User gt lt HTTPS gt lt IP Filter gt and lt IEEE 802 1X gt 4 3 2 1 User The User setting can be found under this path System gt Security gt User Fiovelone To o To A eegen Admin password DTD AA IEEE 802 1X Add User User name User password mai I O access Camera control Talk Listen Manage User User IP filter ring SS Recording Fletocaton t v Tampe Pe Reco File View Factory default Software version R Admin Password Change the administrator s password by inputting the new password in Admin password and Confirm password text boxes The input characters numbers will be displayed as dots for security purposes After clicking on lt Save gt the web browser will ask the Administrator for the new password for accessing The maximum length of the password is 14 characters A 21 NOTE The following characters are valid A Z a z 0 9 amp _ Add user Type the new user s name and password and click on lt Add gt to add the new user User name can be up to 16 characters and the maximum length of the password
40. leanup setting Users can enable automatic recordings cleanup by specifying the time and storage limits Recording List Each video file on the Micro SD SDHC card will be listed in the Recording list as shown below The maximum file size is 60 MB 60 MB per file When the recording mode is set as Always consecutive recording and the Micro SD SDHC card recording is also allowed to be enabled by events triggered once events occur the system will immediately implement events recording to the memory card Then the IP Camera will return to the regular recording mode after events recording Remove To remove a file select the file first and then click on the lt Remove gt button Sort Click on the lt Sort gt button and the files in the Recording list will be listed in name and date order NOTE The capital letter A M R T appears in the very beginning of name AN denotes the sort of the recording A stands for Alarm M stands for Motion R stands for regular recording and T stands for Tampering Download To open download a video clip select the file first and then click on the lt download gt button below the Recording list field The selected file window will pop up Click on the AVI file to directly play the video in the player or download it to a specified location 55 4 3 3 13 Recording Local Recording The Recording setting can be found under this path System gt Recording El levelone Home System Streaming C
41. lso opens the required Windows Firewall ports Total disk space required 56 5 MB Space available on disk 14365 1 MB Dl Cancel 88 Windows Components Wizard Windows Components You can add or remove components of Windows lt P To add or remove a component click the checkbox A shaded box means that only part of the component will be installed To see what s included in a component click Details Components Y af MSN Explorer el Other Network File and Print Services wi G29 Outlook Express EAI Indate Rant Certificates Description Contains a variety of specialized network telated services and protocols Total disk space required 56 5 MB 5 1 Space available on disk 14365 2 MB Das Completing the Windows Components Wizard You have successfully completed the Windows Components Wizard To close this wizard click Finish 89
42. nded location 71 4 4 4 Video OCX Protocol The Video OCX Protocol setting can be found under this path Streaming gt Video OCX Protocol Ellevelone Timm on MM ons oe iS Video Compression f Video OCX protocol setting 9 RTP over UDP RTP over RTSP TCP RTSP over HTTP MJPEG over HTTP Multicast mode Multicast IP Address Multicast H 264 1 Video Port 0 Multicast H 264 2 Video Port Multicast H 264 3 Video Port Multicast H 264 4 Video Port Multicast MJPEG Video Port H Multicast Audio Port Multicast TTL Note This page only applies to video streams going to a DC Viewer ar In the Video OCX protocol setting page users can select RTP over UDP RTP over RTSP TCP RTSP over HTTP or MJPEG over HTTP for streaming video over the network In the case of multicast networking users can select the Multicast mode Click on lt Save gt to confirm the setting Video OCX protocol setting options include RTP over UDP RTP over RTSP TCP RTSP over HTTP MJPEG over HTTP Multicast Mode Enter all required data including lt Multicast IP Address gt lt Multicast H 264 1 H 264 2 H 264 3 H 264 4 Video Port gt lt Multicast MJPEG Video Port gt lt Multicast Audio Port gt and lt Multicast TTL gt into each blank 72 4 4 5 Video Frame Rate The Video Frame Rate setting can be found under this path Streaming gt Video Frame Rate Ellevelone nome sytem ame Video Format A
43. nes Security level For this zone Custom Custom settings To change the settings click Custom level To use the recommended settings click Default level Custom level Customievel Default level Default level Reset all zones to default level Sech 83 The Security Settings screen is displayed as below Secunity Settings Internet Zone Settings g Activex controls and plug ins 4 Allow previously unused Activex controls to run without pror Disable 9 Enable y Allow Scriptlets Disable Enable 9 Prompt Automatic prompting For ActiveX controls Disable 9 Enable 4 Binary and script behaviors O Administrator approved Disable 9 Enable 4 Dienlau vides and snimstinn an a mahnana that daar nok mes 4 Takes effect after you restart Internet Explorer Reset custom settings Reset to medium high default Reset cancel Step 5 Under ActiveX controls and plug ins set ALL items as listed below to lt Enable gt or lt Prompt gt ActiveX controls and plug in settings Automatic prompting for ActiveX controls Binary and scrip behaviors Download signed ActiveX controls Download using ActiveX controls Initialize and script ActiveX not marked as safe Run ActiveX controls and plug ins Script ActiveX controls marked safe for scripting Step 6 Click lt OK gt to accept the settings and close the lt Security gt s
44. o The Software Upgrade Stepi Upload the binary file Step2 Select binary file you want to upgrade ulmagetuserland img Step3 Click the upgrade button to start the upgrade process Upgrade securty 2 Network T ows vt Kee ESA Motion detection Storage management i NOTE Make sure the upgrade software file is available before carrying out software upgrade gt The procedure of software upgrade is as below Step 1 Click on Browse and select the binary file to be uploaded ex ulmage_userland NOTE Do not change the upgrade file name or the system will fail to find the file gt Step 2 Pull down the upgrade binary file list and select the file ulmage userland img Step 3 Click on the lt Upgrade gt button The system will check whether the upgrade file 63 exists or not first and then begin to upload the upgrade file Subsequently the upgrade status bar will display on the page When it runs to 100 the upgrade process is finished After the upgrade process is finished the viewer will return to Home page Step 4 Close the video browser Step 5 Start lt Control Panel gt on your PC and then double click on lt Add or Remove Programs gt In the lt Currently install programs gt list select lt DCViewer gt and click on the button Remove to uninstall the existing DC Viewer Step 6 Open a new web browser re login the IP Camera and then allow the automatic
45. o indicate the valid period of certificate Click on lt OK gt to save the Certificate Information after complete 25 4 3 2 3 IP Filter The IP Filter setting can be found under this path System gt Security gt IP Filter Ellevelone TP To oom L a v Deny v the following IP addresses Filtered IP Addresses IEEE 802 1X AS detection ES rity ampering jing location File View information Using the IP filter access to the IP Camera can be restricted by denying allowing specific IP addresses Enable IP Filter Check the box to enable the IP Filter function Once enabled the listed IP addresses IPv4 will be allowed denied access to the IP Camera Select lt Allow gt or lt Deny gt from the drop down list and click on the lt Apply gt button to determine the IP Filter behavior Addi Delete IP Address Input the IP address and click on the lt Add gt button to add a new filtered address 26 The Filtered IP Addresses list box shows the currently configured IP addresses Up to 256 IP address entries may be specified To remove an IP address from the list please select the IP and then click on the lt Delete gt button 4 3 2 4 IEEE 802 1X The IEEE 802 1X setting can be found under this path System gt Security gt IEEE 802 1X Ellevelone IEEE 802 1X Sto Reco File View User IP filter ring riodical event rage management rding location information re v
46. o the IP Camera users can access it either through DeviceSearch software or input the IP address in the URL bar and click on lt Enter gt IP address This is necessary for network identification Subnet mask It is used to determine if the destination is in the same subnet The default value is 255 255 255 0 Default gateway This is the gateway used to forward frames to destinations in different subnet Invalid gateway setting will fail the transmission to destinations in different subnet Primary DNS Primary DNS is the primary domain name server that translates hostnames into IP addresses Secondary DNS Secondary DNS is a secondary domain name server that backups the primary DNS Use PPPoE 30 For the PPPoE users enter the PPPoE Username and Password into the fields and click on the lt Save gt button to complete the setting Advanced Web Server port The default web server port is 80 Once the port is changed the user must be notified the change for the connection to be successful For instance when the Administrator changes the HTTP port of the IP Camera whose IP address is 192 168 0 100 from 80 to 8080 the user must type in the web browser http 192 168 0 100 8080 instead of http 192 168 0 100 RTSP port The default setting of RTSP Port is 554 the setting range is from 1024 to 65535 MJPEG over HTTP port The default setting of MJPEG over HTTP Port is 8008 the setting range is from
47. of installation and cost savings In order to facilitate onboard storage and data portability the FCS 3071 is also complete with a Micro SD SDHC card slot for local recording 1 1 Features Progressive Scan CMOS Sensor H 264 and MJPEG compression Motion Detection Privacy Masks WDR Smart Picture Quality 3DNR Tampering Alarm Day Night ICR Micro SD support Weatherproof IP66 international Micro SD support Security Torx against tampering ONVIF Support 1 2 Package Contents lt gt FCS 3071 Security TorxM4 Inner Hex Wrench Screw Set Quick Installation Guide CD Manual Utility 1 3 Dimensions Unit mm 1 4 Connectors The diagram below shows the IP Camera s reset button and various connectors Definition for each connector will be given as follows Designation Description 1 Reset Button Restore to default setting press the button with a proper tool 2 Lens Rotate the lens right left to adjust focus 3 Focus Fixed Screw Loosen the screw to adjust the lens 4 Tilt Fixed Screw Loosen the screw to adjust tilt angle 5 Micro SD Card Slot Micro SD Card recording 2 System Requirements To perform the IP Camera via web browser please ensure your PC is in good network connection and meet system requirements as described below Items System Requirement 1 Intel Pentium M 2 16 GHz or Personal Computer Intel Core 2 Duo 2
48. os im Ess me Tampering TALE Hil Network Failure Detection allows the IP Camera to ping another IP device e g NVR VSS Video Server etc within the network periodically and generates some actions in case of network failure occurs for instance a Video Server is somehow disconnected Being capable of implementing local recording through Micro SD card when network failure happens the IP Camera could be a backup recording device for the surveillance system Detection Switch You will be able to turn on off Network Failure Detection in System section Default setting is Off Detection Type Input the IP device address and the period of ping time to ping The ping time setting range 48 is from 1 to 99 minutes Triggered Action Multi option The Administrator can specify alarm actions that will take when network failure is detected All options are listed as follows Enable Alarm Output Select the item to enable alarm relay output Record Stream to SD Card Select the item and the alarm triggered recording will be saved into your Micro SD card Pre trigger buffer recording function allows users to check what happened to cause the trigger The pre trigger buffer time range is from 1 to 3 seconds Select lt Upload for __ sec gt to set the recording duration after alarm is triggered The setting range is from 1 to 99999 seconds Select lt Upload during the trigger active gt to record the triggered video
49. otion Detection function allows detecting suspicious motion and triggering alarms when motion volume in the detected area reaches exceeds the determined sensitivity threshold value In the Motion Detection setting page there is a frame Motion Detection Window displayed on the Live Video Pane as the figure below The Motion Detection Window is for defining the motion detection area To change the size of the Motion Detection Window move the mouse cursor to the edge of the frame and draw it outward inward Moving the mouse to the center of the frame can shift the frame to the intended location Up 10 Motion Detection Windows can be set Click on the lt add gt button under the Live Video Pane to add a Motion Detection Window To cancel a Motion Detection Window move the mouse cursor to the selected Window and click on the lt delete gt button If Motion Detection function is activated the pop off window Motion with indication of motion will be shown Motion PS When motion is detected the signals will be displayed on the Motion window as shown below Motion Detection Users are able to turn on off Motion Detection Default setting is Off Motion Detection Setting Users could adjust various parameters of Motion Detection in this section 43 Sampling pixel interval 1 10 The default value is 1 If the value is set as 3 it means within the detection region system will take one sampling pixel for every 3 pixels b
50. r The selections of Mask color include red black white yellow green blue cyan and magenta Click on lt Save gt to confirm the setting 75 45 Camera Under the tab lt Camera gt there are submenus including lt Exposure gt lt White Balance gt lt Picture Adjustment gt lt Backlight gt lt Digital Zoom gt lt IR Function gt lt WDR Function gt lt Noise Reduction gt and lt TV System gt 30 fps NTSC Video format H 264 1 O H 264 2 xt x12 El elei el MJPEG bitrate H 264 1 bitrate middle compression middle quality 4096 kbps middle compression H 264 2 bitrate H 264 3 bitrate H 264 4 bitrate 1024 kbps high compression low quality 1024 kbps high compression low quality 1024 kbps high compression low quality 2012 08 27 09 37 Languages 76 4 5 1 Exposure Setting The Exposure Setting can be found under this path Camera gt Exposure Exposure a Auto Mode Auto Shutter Min Shutter Speed 1 4 v Manual Mode Fixed Shutter The exposure is the amount of light received by the image sensor and is determined by the width of lens diaphragm opening the amount of exposure by the sensor shutter speed and other exposure parameters With this item users can define how the Auto Exposure function works Each exposure mode is specified as follows Auto Mode Auto Shutter Mode This function is to control the shutter speed and adjust the iris automat
51. s from 1 to 99999 seconds Select lt Upload during the trigger active gt to record the triggered video until the trigger is off is activated so that this function can be implemented Refer to Recording A NOTE Please make sure the local recording with Micro SD SDHC card for further details Send Message by FTP E Mail The Administrator can select whether to send an alarm message by FTP and or E Mail when tampering is detected Upload Image by FTP Select this item and the Administrator can assign a FTP site and configure various parameters When tampering is detected event images will be uploaded to the 51 appointed FTP site lt Pre trigger buffer gt function allows users to check what happened to cause the trigger The lt Pre trigger buffer gt frame rate could be pre determined On the other hand lt Post trigger buffer gt is for users to upload certain amount of images after tampering is triggered Check the box lt Continue image upload gt to upload the triggered images during certain time or keep uploading until the trigger is off Select lt Upload for __sec gt and enter the duration in the blank The images of the duration will be uploaded to FTP when tampering is triggered The setting range is from 1 to 9999 seconds Select lt Upload during the trigger active gt to make the images keep being upload to FTP during the trigger active until the tampering stops Set the Image frequency as the upload frame rate
52. scriptions for different video rotate type 9 Flip If select lt Flip gt the image will be rotated vertically Mirror If select lt Mirror gt the image will be rotated horizontally 90 Degree counter clockwise Selecting lt 90 Degree Counter clockwise gt will make the image 90 counter clockwise inversed 180 Degree Rotate Selecting lt 180 Degree gt will make the image 180 inversed Click on lt Save gt to confirm the setting GOV Settings Users can set the GOV length to determine the frame structure I frames and P frames in a video stream for saving bandwidth The setting range is from 2 to 64 Default value is 60 which means there s one l frame every 60 frames Longer GOV length means lower frame frequency The default value for H 264 1 H 264 2 H 264 3 H 264 4 is 60 60 30 30 Click on lt Save gt to confirm the GOV setting H 264 Profile Users can set each H 264 Profile to lt Baseline Profile gt lt Main Profile gt or lt High Profile gt according to its compression needs With the same bit rate the higher the compression ratio the better the image quality is The default setting is lt Main Profile gt 67 NOTE Please make sure the higher compression ratio is supported by system before setup 4 4 2 Video Compression The Video Compression setting can be found under this path Streaming gt Video Compression Ellevelone Jon oon gt ESTA Video Compression MJPEG Compression set
53. stop gt button to disable video streaming the live video will be displayed as black Click on the lt restart gt button to show the live video again Web Recording button on off Mi e Click on the lt Recording gt button and the Live View through the web browsing will be directly recorded to the specific location on the local hard drive which could be configured in the lt File Location gt page The default storage location for the web recording is C Please refer to File Location for further details NOTE For users with Windows 7 operating system it is required to log on as an Administrator to implement the Web Recording function 18 4 3 System Under the tab lt System gt there are submenus including lt System gt lt Security gt lt Network gt lt DDNS gt lt Mail gt lt FTP gt lt HTTP gt lt Application gt lt Motion Detection gt lt Network Failure Detection gt lt Tampering gt lt Storage Management gt lt Recording gt lt File Location gt lt View Information gt lt Factory Default gt lt Software Version gt lt Software Upgrade gt and lt Maintenance gt AN NOTE The System configuration page is only accessible by the Administrator 4 3 1 System The System Setting can be found under the path System gt System Fieveione TP Ts A System Host Name MegaPixelCamera 4 Time zone GMT 00 00 Gambia Liberia Morocco England 4 Enable dayligh
54. synchronized with a dynamic IP address In other words it allows those using a dynamic IP address to be associated to a static domain name so others can connect to it by name Enable DDNS Check the item to enable DDNS Provider Select one DDNS host from the provider list Host name Enter the registered domain name in the field Username E mail 37 Enter the username or e mail required by the DDNS provider for authentication Password Key Enter the password or key required by the DDNS provider for authentication 38 4 3 3 6 Mail The Mail setting can be found under this path System gt Mail Flievelone Ton gt ESTE 1st SMTP mail server 1st SMTP mail server port 1st SMTP account name 1st SMTP password 1st recipient email address 1st SMTP SSL 2nd SMTP mail server 2nd SMTP mail server port 2nd SMTP account name 2nd SMTP password 2nd recipient email address 2nd SMTP SSL Sender email address ows mar APA ESA detection Network failure detection _ Storage management The Administrator can send an e mail via Simple Mail Transfer Protocol SMTP when event is triggered SMTP is a protocol for sending e mail messages between servers SMTP is a relatively simple text based protocol where one or more recipients of a message are specified and the message text is transferred Two sets of SMTP can be configured Each set includes SMTP Server S
55. t IP address is 192 168 0 250 1 device s found Search Upnp FCS 1141 MegaPixelCamera 192 168 50 143 0 255 255 255 0 00 11 68 05 31 40 ALL y Search Method E Pier 7 Step 4 Double click or right click and select Browse to access the camera directly via web browser 1 device s found Search Upnp Search Method Project Filter e Local Broadcast FCS 1141 5 255 0 00 11 68 05 31 40 lon Dob ai Torn Browse Step 5 Then the prompt window of request for entering default username and password as shown below will appear for login to the IP Camera MegapixellPCamera User name Password Remember my password The default login ID and password for the Administrator are Login ID Password root AN NOTE ID and password are case sensitive NOTE It is strongly advised that administrator s password be altered for the security concerns Additionally users can change the IP Camera s network property either DHCP or Static IP directly in the device finding list Refer to the following section for changing the IP Camera s network property Example of Changing IP Camera s Network Propert Users can directly change an IP Camera s network property ex from static IP to DHCP in the finding device list The way to change the IP Camera s network property is specified below Step 1 In the finding device list click on the IP Camera that you woul
56. t saving time time offset 01 00 00 Start date Jan 1s End date Jan _ E ier Sync with computer time PC date 2012 08 27 yyyy mm dd PC time 17 18 08 hh mm ss 9 Manual location Periodical event Date 2010 04 01 yyyy mm dd Time 00 00 00 hh mm ss i Sync with NTP server NTP server 0 0 0 0 host name or IP address Update interval Every hour z i Hi 19 Host Name The name is for camera identification If alarm function refer to Application is enabled and is set to send alarm message by Mail FTP the host name entered here will display in the alarm message The maximum length of the Host Name is 30 characters Time Zone Select the time zone you are in from the drop down menu Enable Daylight Saving Time To enable DST please check the item and then specify time offset and DST duration The format for time offset is hh mm ss for instance if the amount of time offset is one hour please enter 01 00 00 into the field Sync With Computer Time Select the item and video date and time display will synchronize with the PC s Manual The Administrator can set video date time and day manually Entry format should be identical with that shown next to the enter fields Sync with NTP server Network Time Protocol NTP is an alternate way to synchronize your camera s clock with a NTP server Please specify the server you wish to synchronize in the enter fie
57. tate Type The Video Format setting can be found under this path Streaming gt Video Format Flievelone SC e Video Format Video Resolution H 264 H 264 id H 264 1 format 1920 x 1080 15 fps H 264 2 format 1280 x 1024 15 fps BNC support NA Note Image attachment by FTP or E mail will be available only while MJPEG streaming is selected Text Overlay Settings Y Include date Include time Include text string Video Rotate Type Normal video GOV Settings H 264 1 GOV Length 60 H 264 2 GOV Length H 264 3 GOV Length H 264 4 GOV Length 30 H 264 Profile H 264 1 Main profile y H 264 2 Main profile H 264 3 Main profile Y H 264 4 Main profile Video Resolution Under Video Resolution section the available video resolution formats are including MJPEG and H 264 Please refer to the User s Manual for more combination details Click on lt Save gt to confirm the setting 66 Text Overlay Settings Users can select the items to display data including date time text on the live video panel The maximum length of the string is 20 alphanumeric characters Click on lt Save gt to confirm the Text Overlay setting Video Rotate Type Users can change video display type if necessary Selectable video rotate types include Normal Flip Mirror 90 degree clockwise 180 degree rotate and 90 degree counterclockwise The following is de
58. ting MJPEG Q factor 35 H 264 1 Compression setting H264 1 bitrate 4096 kbit s H 264 2 Compression setting H264 2 bitrate 1024 kbit s H 264 3 Compression setting H264 3 bit rate 1024 kbit s H 264 4 Compression setting H264 4 bitrate 1024 kbit s Compression information setting Display compression information in the home page CBR mode setting enable H 264 1 CBR mode enable H 264 3 CBR mode enable H 264 2 CBR mode enable H 264 4 CBR mode E E Users can select a proper MJPEG H 264 compression mode in the video compression page depending on the application MJPEG Q Quality factor Higher value implies higher bit rates and higher visual quality The default setting of MJPEG Q factor is 35 the setting range is from 1 to 70 H 264 1 H 264 2 H 264 3 H 264 4 bit rate The default setting of H 264 1 is 4096 kbit s and for H 264 2 H 264 3 H 264 4 is 1024 kbit s 68 the setting range for H 264 1 is from 64 to 8192 kbps and for H 264 2 H 264 3 H 264 4 is from 64 to 2048 kbit s Display Compression Information Users can also decide whether to display compression information on the Home page CBR Mode Setting The CBR Constant Bit Rate mode could be the preferred bit rate mode if the bandwidth available is limited It is important to take account of image quality while choosing to use CBR mode Click on lt Save gt to confirm the setting 69 4 4 3 Video ROI The Video ROI s
59. to the following Provide the Certificate Information for more details When the request is complete the subject of the Created Request will be shown in the field Click on lt Properties gt below the Subject field copy the PEM formatted request and send it to your selected CA When the signed certificate is returned install it by uploading the signed certificate Provide the Certificate Information To create a Self signed HTTPS Certificate or a Certificate Request to CA please enter the information as requested Create Self Signed Certificate Create Certificate Request Country y A State or Province Locality Organization Organizational Unit 2 2 2 2 2 Common Name 2 2 2 2 2 2 Valid Day Country Enter a 2 letter combination code to indicate the country the certificate will be used in For instance type in US to indicate United States 24 State or province Enter the local administrative region Locality Enter other geographical information Organization Enter the name of the organization to which the entity identified in Common Name belongs Organization Unit Enter the name of the organizational unit to which the entity identified in Common Name belongs Common Name Indicate the name of the person or other entity that the certificate identifies often used to identify the website Valid days Enter the period in days 1 9999 t
60. ubject No certificate installed Ti event re version AAA gt lt HTTPS gt allows secure connections between the IP Camera and web browser using lt Secure Socket Layer SSL gt or lt Transport Layer Security TLS gt which ensure camera settings or Username Password info from snooping It is required to install a self signed certificate or a CA signed certificate for implementing lt HTTPS gt A Softwa To use HTTPS on the IP Camera a HTTPS certificate must be installed The HTTPS certificate can be obtained by either creating and sending a certificate request to a Certificate Authority CA or creating a self signed HTTPS certificate as described below Create Self signed Certificate Before a CA issued certificate is obtained users can create and install a self signed certificate first 23 Click on lt Create gt button under Create self signed certificate and provide the requested information to install a self signed certificate for the IP Camera Please refer to the last part of this section Provide the Certificate Information for more details NOTE The self signed certificate does not provide the same high level of security as when using a CA issued certificate Install Signed Certificate Click on the lt Create Certificate Request gt button to create and submit a certificate request in order to obtain a signed certificate from CA Provide the request information in the create dialog Please refer
61. until the trigger is off V Record stream to sd card Pre trigger buffer sec D Upload for bk sec 9 Upload during the trigger active NOTE Please make sure the local recording with Micro SD SDHC card is AN activated so that this function can be implemented Refer to Recording for further details Send Alarm Message by FTP E Mail The Administrator can select whether to send an alarm message by FTP and or E Mail when an alarm is triggered Save Click on the lt Save gt button to save all the settings mentioned above 49 4 3 3 11 Tampering The Tampering setting can be found under this path System gt Tampering Elievelone Ton PI sis ores Tiago System Tampering Alarm Tampering Alarm 3 File name image jpg Add date time suffix network AA Sei Tampering Duration me Minimum duration 20 sec Man triggered action e Record stream to sd card Send message by FTP HTP Send message by E Mail Upload image by FTP Motion detection E Upload image by E Mail Send HTTP notification File Name Add sequence number suffix no maximum value Periodical event S 3 Add sequence number suffix up to 0 o and then start over Storage management Overwrite Recording tt Tampering Alarm function helps the IP Camera against tampering such as deliberate redirection blocking paint spray and lens cover etc through video analysis
62. wser based Viewer Introduction Flievelone TP sn enna enn Joon J Languages 2012 08 27 09 15 Video format H 264 1 H 264 2 x1 x12 DU a je MJPEG bitrate middle compression middle quality H 264 1 bitrate 4096 kbps middle compression H 264 2 bitrate 1024 kbps high compression low quality H 264 3 bitrate 1024 kbps high compression low quality H 264 4 bitrate 1024 kbps high compression low quality There are five main tabs including lt Home gt lt System gt lt Streaming gt lt Camera gt and lt Logout gt on the Home Page Home Users can monitor live video of the targeted area 15 System setting The administrator can set host name system time root password network related settings etc Further details will be interpreted in chapter System Streaming setting The administrator can modify video resolution and rotate type and select audio compression mode in this page Camera setting Users can adjust various camera parameters including lt Exposure gt lt White Balance gt lt Picture Adjustment gt lt Backlight gt lt Digital Zoom gt lt WDR Function gt lt Noise Reduction gt and lt TV System gt Logout Click on the tab to re login the IP Camera with another username and password 16 4 2 Home Page Click on the tab lt Home gt to access the Home Page There are several function buttons on the Home page Detailed information of each item
63. y each row and each column refer to the figure below Detection level 1 100 The default level is 10 The item is to set detection level for each sampling pixel the smaller the value the more sensitive it is Sensitivity level 1 100 The default level is 80 which means if 20 or more sampling pixels are detected differently system will detect motion The bigger the value the more sensitive it is Meanwhile when the value is bigger the red horizontal line in the motion indication window will be lower accordingly Time interval sec 0 7200 The default interval is 10 The value is the interval between each detected motion Triggered Action Multi option The Administrator can specify alarm actions that will take when motion is detected All options are listed as follows Enable Alarm Output Check the item and select the predefined type of alarm output to enable alarm relay output when motion is detected Record stream to SD Card Select this item and the Motion Detection recording will be stored in Micro SD SDHC card when motion is detected Pre trigger buffer recording function allows users to check what happened to cause the trigger The pre trigger buffer time range is from 1 to 3 seconds 44 Select Upload for sec gt to set the recording duration after motion event occurs The setting range is from 1 to 99999 seconds Select lt Upload during the trigger active gt to record the triggered video until

FCS-3071 2-Megapixel PoE Dome Network Camera User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents