adax neo user guide
Contents
1. User Guide GH Pi G 1 Day A 5 Function key 2 Desired temperatur 6 Day temp reduction 5 days 3 Heat on off 7 Night temp reduction 7 days 4 Night B USER GUIDE De time use and after power cuts of over 2 Select the normal temperature Or minutes setting Ye Al ce When putting Adax Neo into operation or after a lengthy power cut the display will flash showing t that no temp reduction programme is active Press TT F to reset and the thermostat will revert to the default settings 22 C for normal temp and 15 C Choose the desired normal for reduced temp The duration of temp reduc temperature by pressing tion is 7 hours at night and 5 hours during the day A or Y Temp reduction is not activated 5 ee es What do flashing lights and steady lights A and B indicate Set the correct week day by holding down on F until d d day is shown in the display Slow flashing shows that a temp _ reduction period is ongoing At the Press or V until the appropriate same time the display will show the figure is displayed Monday 1 temp setting tuesday 2 etc Store the setting by pressing F or allow it to be stored A steady light shows that Neo is pro ae a 033 grammed for temp reduction but that X of it is not currently in an active period NB The correct weekday must be set at a time later than the start of daytime temp reduction 9 C2. hours This will now be repeated at the same time from Monday to Friday leaving Saturday and Sunday unaffected Alter the duration of temp reduction Hold down on F and press twice on 7 or 5 depending on which you wish to alter When h hour flashes in the display release F Press or W to choose the number of hours you wish temp reduction to last Te Je 18 C 20 C 2 C deviation 20 C 20 C Should the actual room temperature and Hold down on F until d is displayed The heater will now the Neo s setting not correspond Neo Release F for a moment then press it once work with the should be calibrated First let the heater more C will be displayed and then the temperature displayed work steadily at the same temperature setting for normal temp Press or VY until by Neo matching the setting preferably for at least 24 hours the display shows the same as the actual actual temperature of keeping doors and windows closed This measured room temperature Store by the room makes certain that it is Neo that is pressing F or let the new setting be controlling room temperature Sudden big automatically stored after appr 30 seconds changes in outdoor temperature may affect calibration making it less precise
3. ancel a period of temp reduction Hold down on F and press once on 7 or 5 to override the current active period or the next period of temp reduction The lamp is lit steadily for the period in question Temp reduction will resume as usual from the following period Hold down on 7 or 5 until the green lamp is extinguished NB After power cuts of over 60 minutes the thermostat reverts to the default setting of 22 C 3 Start nighttime temperature reduction At the time you wish temp F reduction to start press 7 until 15 C is displayed The green lamp B will now flash slowly to indicate that temp reduction is active The temperature is lowered to 15 C for the next 7 hours This will now be repeated at the same time every night 7 Change the temp reduction setting Hold down on F and F press 3 times on 7 eller 5 depending on which J you wish to change When Or 7 C flashes in the display Ge release F S Press or V to choose your desired temp You can J select different daytime and nighttime settings 11 Calibration 4 Start daytime temperature reduction At the time of day you wish temp reduction to start hold down but ton 5 until 15 C is displayed The green lamp A will flash slowly denoting that temp reduc tion is active The temperature is lowered to 15 C for the next 5
Download Pdf Manuals
Related Search