Home

DN-500BD User Guide

1. It also applies to the HDMI output if the Format gt HDMI Audio setting is PCM e Speaker Setting 0 Configuration Select the channel configuration of your sound system 2 x 3 x 4 x 5 x or 7 X Test Tone Select this to play a test tone through a speaker in your sound system Use the left right cursor buttons lt P to select the speaker from the diagram 23 Output Control 0 Output Volume When set to Variable you can use the Vol buttons on the remote control to adjust the volume level of the audio outputs and 7 1 outputs When set to Fixed the Vol buttons on the remote control will be disabled and the volume will be set to the Maximum Volume see below Maximum Volume Select the highest possible volume level of the audio outputs and 7 1 outputs 10dB 6dB OdB 6dB or 10dB Be careful higher volume levels can cause distortion clipping which can damage your amplifier or speakers If the Output Volume see above is set to Fixed the audio outputs and 7 1 outputs will play audio at this volume level Network Setup 24 Function e BD Live Network Access Select the level of access to BD Live content on the internet Permitted you can access all content Partial Permitted you can access only certain content Prohibited BD Live content is blocked DN 500BD must be connected to the internet via its LAN port for this feature to work properly BD Live These options let you man
2. opacity etc When set to Custom you can select these attributes to your preference described below Font Color The color of the text Default White Black Red Green Blue Yellow Magenta or Cyan Font Size The size of the text Default Standard Small or Large Font Style The style of the text Default Monospaced with serifs Proportionally spaced with serifs Monospaced without serifs or Proportionally spaced without serifs Audio Setup Font Opacity The opacity of the text Solid Translucent or Transparent Font Edge The style of the edges around the characters of text Default None Raised Depressed Uniform Left drop shadow or Right drop shadow Font Edge Color The color of the edges around the characters of text if any White Black Red Green Blue Yellow Magenta or Cyan BG Color The color of the background Default White Black Red Green Blue Yellow Magenta or Cyan BG Opacity The opacity of the background Solid Translucent or Transparent Window Color The color of the window around the text Default White Black Red Green Blue Yellow Magenta or Cyan Window Opacity The opacity of the window around the text Solid Translucent or Transparent e Function o Secondary Audio Mark When set to On the screen will show a mark to indicate that there is secondary video you can view using the Picture in Picture feature When set to Off these marks are disabled this featu
3. 1 4 When no zoom distance is shown on the screen the picture is at its normal zoom distance Angle Press this button to select a different camera angle This feature is available only on certain DVD or Blu ray Discs Red Green Yellow Blue Press these buttons to perform functions that are specific to the disc you are using Your disc may provide information about how to use these buttons These functions vary between discs and may not be supported on all discs Battery Usage To replace the battery 1 3 On the back of the remote control push the small tab inward and remove the battery compartment door Remove any old batteries from the compartment and insert 2 new AAA batteries Make sure each one is facing the proper direction according to its polarities or Push the battery compartment door back into its original position Important Keep the following points in mind when using or replacing batteries Use 2 AAA batteries Do not handle batteries roughly or disassemble them When replacing the batteries place them with their polarities and facing the correct directions Do not leave batteries in a place subject to high temperature or direct sunlight Keep batteries in a place beyond the reach of infants or children If a battery is swallowed consult a physician immediately Discard any leaking battery immediately Be careful when handling it as the electrolyte can burn your skin or clothes If the e
4. PLAYER J XjpoLsy DIVX 5 Gds HDMI Ben vn svnoa R Ve Ba Power Press this button to turn DN 500BD on off The light above the button will be red when it is off or green when it is on Make sure the AC In is properly connected to a power outlet Do not turn the unit off during media playback doing so could damage your media USB Port Connect a mass storage class USB device to this port See Operation gt Playing Files Video Audio or Picture for more information Disc Tray Insert a compatible disc into this tray when it is open Eject Press this to eject or close the disc tray Remote Sensor Point the remote control at this sensor when operating it See Remote Control for more information Display This screen indicates the unit s current operation Mode Indicators These lights indicated whether or not certain functions are enabled or disabled Lock IR Lock or Hide OSD See Other Features for more information Shift Press and hold this button to perform the secondary function of any one of the five buttons next to it described below Skip Back 44 Press this button to skip to the previous chapter track or file Press and hold Shift and press this button to cycle through the Repeat modes See the Operation chapter for more information Skip Forward PP Press one of these buttons to skip to the previous or next track or chapter Press and hold Shift and press this button to loop a section of video or audio du
5. Stop m on DN 500BD or the remote control To pause playback press Pause 11 on DN 500BD or the remote control To resume playback press Pause Il or Play on DN 500BD or the remote control To rewind or fast forward press Search Back Forward P on the remote control Each time you press the same button the speed will increase You can do this up to 5 times before it returns to normal playback speed To resume playback press Play on DN 500BD or the remote control To skip to the next track press Skip Forward Pb l on DN 500BD or the remote control To skip to the previous track press Skip Back Pd twice on DN 500BD or the remote control though if you are within the first few seconds of the current track you can press it just once To return to the beginning of the track press Skip Back K 4 once on DN 500BD or the remote control If you are within the first few seconds of the current track though doing this will skip to the previous track Additional Functions To select a Repeat mode press Repeat on the remote control or press Shift and Skip Back K 4 on DN 500BD It will cycle through 3 modes e Off Normal operation e Repeat Track The current track will repeat continuously In this Repeat mode pressing CJ will Skip Back Forward K 4D will skip to the beginning of the current chapter only NE l All e Repeat All The current title will repeat continuously eal To select a playback mode pre
6. chapter CH or title TT After that press OK to unlock these 3 H fields Use the left right cursor buttons lt P to select each field hours minutes and f seconds Use the up down cursor buttons A V or number buttons 0 9 to enter each JA as a 2 digit number Press OK to jump to that time in the chapter CH or title TT 3 To jump to another location repeat Steps 1 2 To close the Information panel press Info If the panel does not close press OK once and then press Info A bookmark is a specific location in a video that is stored in DN 500BD s memory You can set up to 12 bookmarks and then jump to those locations directly saving you the time of scanning through the video later To create a bookmark press Mark on the remote control at the desired location during video playback The screen will show the number of the bookmark current title current chapter and current time To jump to a bookmark 1 Press and hold Mark on the remote control for 6 seconds Playback will pause and the bookmarks will appear on the screen 2 Use the left right cursor buttons lt P to move through the bookmarks When you select a bookmark you will see the current title current chapter and current time above it The bookmarks you have created are white and unused bookmarks are gray 3 Press OK to jump to the desired bookmark Playback will resume from that bookmark s location To cancel the operation and return to norm
7. enter a number You must enter the current password first You must also enter the new password twice to ensure you entered it correctly o Parental Control Select the highest rating that can be viewed G PG PG 13 R NC 17 or Adult When set to Off or when a disc or video file does not include rating information no content is restricted o Country Code Use this to select your country 21 Video Setup 22 Output Setting e Video Adjust Select More and press OK to view the sliders for Brightness Contrast Hue and Saturation Use the left right cursor buttons lt P to adjust each one Press b to return to the previous screen 3D Output When set to Auto DN 500BD will determine automatically display 3D video output if a video uses it When set to Off no videos will use 3D video output TV Aspect Ratio Select the desired aspect ratio 16 9 Full 16 9 Normal 4 3 Pan amp Scan or 4 3 Letterbox TV System Select the broadcasting standard for your location NTSC PAL or Multi By default this should already be set to the correct format for your location Select Multi only if your TV supports both NTSC and PAL systems Resolution Select the picture resolution Auto DN 500BD will detect the optimal resolution automatically 480i 576i 480p 576p 720p 1080i or 1080p 1080p24 Conversion When set to On DN 500BD will convert the frame rate of 1080p Blu ray video playing at 24 Hz to 60 Hz for locations us
8. on DN 500BD again A B will appear on the screen and the loop will start and repeat continuously 3 To stop the loop press A B on the remote once more or press Shift and Skip Forward b l on DN 500BD once more A B will disappear from the screen and playback will continue normally To jump to a specific chapter of the disc 1 Use the number buttons 0 9 on the remote control to select the number of the desired chapter 2 To confirm your choice press OK or wait a few seconds The desired chapter will start playing To cancel press Clear To jump to a specific title chapter or time of the disc 1 Press GoTo on the remote control The Information panel will appear at the top of the screen To cancel the operation before selecting a title chapter or time press GoTo again or wait until the blue square cursor in the Information panel disappears and then press Info 2 Use the left right cursor buttons lt gt to select any of the available fields e Title Press OK to unlock this field Use the up down cursor buttons A V or number buttons 0 9 to select the number of the desired title and then press OK to jump to it e Chapter Press OK to unlock this field Use the up down cursor buttons AV or PER number buttons 0 9 to select the number of the desired chapter and then press OK to jump to it e Time Use the up down cursor buttons AW to select whether these 3 fields show the elapsed time for the
9. press OK 3 Select the folder for the desired file type Photo Music or Video 4 Select the file from which you want to start playback and then press Play on DN 500BD or the remote control or press OK on the remote control The playlist will start playing To remove files from a playlist Go to the highest folder in the Media Center Select the Playlist folder and then press OK Select the folder for the desired file type Photo Music or Video Se Se Select the file you want to remove from the playlist and then press the right cursor button P A checkmark will appear next to the file Repeat this for other files you want to remove from the playlist that are in the same folder If you exit a folder all checkmarks will be erased To select all files in the current folder press Title Popup select Select All and then press OK Checkmarks will appear next to all files To deselect all files in the current folder press Title Popup select Clear All and then press OK All checkmarks next to the files will be erased Alternatively exit the folder 5 When at least one file is selected has a checkmark press Title Popup and then press OK to select Remove from Playlist The selected files in that folder will be removed from the playlist This does not erase those files from the USB drive The files will still be in their original folders A bookmark is a specific location in a video that is stored in DN 500BD s mem
10. right cursor button D to rotate the picture 90 clockwise Additional Functions A playlist is a customized set of audio photo or video files that play in a predetermined sequence You can use playlists to play your media in an order you choose Important Playlists can contain only photo files only audio files or only video files You cannot create playlists with different media for example a playlist with photo and video files To create a playlist of files 1 While browsing files in the Media Center select a file you want to add to the playlist and then press the right cursor button D A checkmark will appear next to the file Repeat this for other files you want to add to the playlist that are in the same folder If you exit a folder all checkmarks will be erased To select all files in the current folder press Title Popup select Select All and then press OK Checkmarks will appear next to all files To deselect all files in the current folder press Title Popup select Clear All and then press OK All checkmarks next to the files will be erased Alternatively exit the folder 2 When at least one file is selected has a checkmark press Title Popup and then press OK to select Add to Playlist The selected files in that folder will be added to the end of the playlist and the checkmarks will disappear To play a playlist 1 Go to the highest folder in the Media Center 2 Select the Playlist folder and then
11. the front panel e Use any function on the remote control unless the IR Lock feature is enabled IR Lock The IR Lock feature disables the remote control by disabling the infrared sensor on DN 500BD s front panel This helps prevent accidental changes to playback To enable disable the IR Lock feature press and hold Shift and then press Pause on DN 500BD s front panel When IR Lock is enabled the IR Lock light to the right of the display will turn on While IR Lock is enabled you can still use any function on the front panel unless the Lock feature is enabled Hide OSD The Hide OSD feature hides the options normally shown on the Home Screen Blu ray Disc Media Center and Setting simplifying the startup process When DVD CD Auto Play is set to On you can simply insert a disc and it will start playing immediately you will not have to acess the Home screen every time you want to play a disc see Adjusting the Settings gt Setting gt Playback Setup To enable disable the Hide OSD feature press and hold Shift and then press Play on DN 500BD s front panel When Hide OSD is enabled the Hide OSD light to the right of the display will turn on Adjusting the Settings Setting The Setting menu lets you change settings that affect DN 500BD s overall operation There are several different types of settings you can configure playback see Playback Setup below video see Video Setup below sound see Audio Setup b
12. time press GoTo again or wait until the blue square cursor in the Information panel disappears and then press Info 2 Use the left right cursor buttons lt P gt to select either of the available fields e Track Press OK to unlock this field Use the up down cursor buttons A V or number buttons 0 9 to select the number of the desired track and then press OK to jump to it D e Time Use the up down cursor buttons AW to select whether these 3 fields show the mn elapsed time for the Track or Disc After that press OK to unlock these 3 fields Use the TXK left right cursor buttons lt P to select each field hours minutes and seconds Use the MD up down cursor buttons AV or number buttons 0 9 to enter each as a 2 digit number Press OK to jump to that time in the track or disc 3 To jump to another location repeat Steps 1 2 To close the Information panel press Info To create a Program a list of tracks that will play in a specific order 1 Press Prog on the remote control The Program page will appear on the screen In the Program page the type of media and total number of tracks Track Total will appear above the 15 available slots of the Program 2 Do any of the following in the Program page e At any time press Play on DN 500BD or the remote control to start playing the Program e At any time press Return on the remote control to exit the Program page This will clear all slots of the Pr
13. CH or remaining time for the chapter CH Mode Use this to select a playback mode Normal Random or Shuffle Audio The available settings depend on the supported audio configurations of your video For example a video file may let you select Stereo Mono Left or Right while a Blu ray Disc may let you select DTS HD MA Master Audio or Dolby Digital in various languages Subtitles The available settings depend on the supported subtitle languages of your video Bitrate Use this to show the current bitrate of the video or audio Ins Search Press OK to scan slowly through the video Ins Replay Press OK to jump back 10 seconds in the video Audio CD Options Track The number on the left is the currently playing track which you can change The number on the right is the total number of tracks on the disc or in the program Time Use this to show the time as the elapsed time for the track Track remaining time for the track Track elapsed time for the disc Disc or remaining time for the disc Disc Mode Use this to select a playback mode Normal Random or Shuffle Bitrate Use this to show the current bitrate of the audio Ins Search Press OK to scan slowly through the audio Ins Replay Press OK to jump back 10 seconds in the audio Audio File Options File The number on the left is the currently playing audio file which you can change The number on the right is the total number of audio files in the folder
14. DENON PROFESSIONAL DN 500BD User Guide Guia del usuario Guide d utilisation Guida per l uso Benutzerhandbuch Appendix English 3 28 Espanol 29 54 Fran ais 55 80 Italiano 81 106 Deutsch 107 132 English 133 135 DENON PROFESSIONAL User Guide English Introduction Box Contents Support DN 500BD Rack Ears amp Screws For the latest information about this product system Power Cable User Guide requirements compatibility information etc and product registration visit denonpro com Remote Control Safety amp Warranty Manual Safety Instructions Please also see the included Safety amp Warranty Manual for more information Before turning the Make sure all connections are secure and correct and that there are no power on problems with the connection cables Power is supplied to some of the circuitry even when the unit is powered off When the unit will not be used for long periods of time disconnect the power cable from the power outlet Proper ventilation If the unit is left in a room which is not properly ventilated or is full of smoke from cigarettes dust etc for long periods of time the surface of the optical pickup may get dirty causing incorrect operation About condensation If there is a major difference in temperature between the inside of the unit and the surroundings condensation may form inside the unit causing the unit not to operate properl
15. ESSIONAL OOO O Return Press this button to return to the previous menu screen Clear Press this button to clear delete everything in the current field Started Home Screen for more information Setup Press this button to open the Setup Menu See Operation gt Adjusting the Settings gt Setting for more information Option Press this button to open the Options Menu See Operation gt Adjusting the Settings gt Options for more information Info Press this button to open the Information screen Cursor Buttons A V 4 Use these buttons to navigate through the files and folders OK Press this button to confirm a selection GoTo Press this button to manually enter a time you want to skip to See the Operation chapter for more information Stop H Press this button to stop playback Pause II Press this button to pause playback Play Press this button to start or resume playback Search Back Forward lt gt Press these buttons to rewind fast forward respectively Each time you press the same button the speed will increase You can do this up to 5 times before it returns to normal playback speed Skip Back Forward k44 gt I Press one of these buttons to skip to the previous or next track or chapter 22 23 24 25 26 27 28 29 30 31 32 33 34 Audio Press this button during video playback to show current audio setting in the upp
16. a stereo RCA cable to connect the audio outputs balanced or unbalanced to the analog inputs of your external receiver amp powered speakers etc e Use RCA cables to connect the 7 1 outputs to your 7 1 surround sound system Optional Connect a USB hard drive with playable content to the USB port front panel or rear panel Optional Use a 9 pin D Sub cable to connect the Remote Input to a host device usually a computer that will control it Optional Use an Ethernet cable to connect the LAN port to your modem or a host device After completing all the connections use the included power cable to connect the AC In to a power outlet Initial Wizard 1 Press DN 500BD s Power button to power it on Make sure your TV is on too 2 The Initial Wizard screen will appear On each page of the Initial Wizard e Use the up down cursor buttons A V on the remote control to move through the available options e Press OK to confirm your selection and move to the next page e Press Skip Back k4d to return to the previous page 3 On Page 1 press OK on the remote control to move to the next screen On Page 2 select the language you want the display to use On Page 3 select the broadcasting standard for your location NTSC PAL or Multi Select Multi only if your TV supports both NTSC and PAL systems 6 On Page 4 select your TV s resolution Once you press OK the resolution will change temporarily At that point select Yes or No to con
17. age where DN 500BD downloads files while accessing BD Live content if any Press OK to open a window to configure each option BUDA Setup This window shows the amount of free space on the selected drive see below Press OK to format the drive this will erase all content on the drive Please select the BUDA mode Select the drive you want to use to store downloaded BD Live files External a USB drive connected to DN 500BD s USB port or On board DN 500BD s internal memory Note that you will need a certain amount of free space on the drive to download some content properly see above Important Your USB drive must not use an NTFS file system Setting 0 0 Interface Select how DN 500BD will access the internet Ethernet the LAN port must be connected to your Ethernet connection or Wireless DN 500BD will connect to your wireless router When you change this setting you will be asked if you want to continue which terminates your current connection When you select Wireless you must also select how you want to connect to the network Scan display available networks Manual enter the network service set identifier SSID manually or Auto use Wi Fi Protected Setup WPS If you select Auto select how you will connect to the network PBC press the WPS Reset button on your router within 120 seconds of selecting Next or PIN enter the PIN shown on the screen into the software control panel for your wireless rout
18. al playback press Mark To erase a bookmark 1 Press and hold Mark on the remote control for 6 seconds Playback will pause and the available bookmarks will appear on the screen 2 Press Clear to erase the last created bookmark 3 Press Mark to close the bookmarks and return to normal playback To view subtitles press Subtitle on the remote control The current subtitle language will appear in the upper right corner of the screen Each press after that will select the next available subtitle language Select Off to disable the subtitles Note For this feature to work properly the video must have subtitles available 12 Playing Audio Discs DN 500BD can play and view the following audio disc formats Supported CD formats CD CD R CD RW DTS Music Disc DTS Audio CD 5 1 Music Disc HDCD Super Video CD SVCD Video CD VCD Supported DVD formats DVD DVD R DVD R DVD RW DVD RW See the Basic Functions section to learn some basic operations See Additional Functions to learn more advanced ones Basic Functions To play audio from a CD 1 Press Eject 4 on DN 500BD or the remote control to open the disc tray 2 Insert an audio CD into the disc tray and press Eject 4 on DN 500BD or the remote control again to close it The CD must be properly finalized The display will show LoAd when the disc is loading and then Cd when the CD is loaded 3 The CD will start playing automatically To stop playback press
19. c Range gt 100 dB A weighted Headroom 6 dB Channel Separation gt 90 dB Communication Remote Control Infrared protocol gt 200 mV transmission output level Serial Remote Connector 9 pin D Sub female RS 232C Mode Full duplex Baud Rate 9600 or 38400 bps selectable Ethernet Connector LAN port Standards Ethernet 10 Mbps Fast Ethernet 100 Mbps Other General Connections 2 XLR audio outputs L R balanced 2 RCA audio outputs L R unbalanced 8 RCA audio outputs 7 1 surround sound Coaxial digital audio visual output HDMI audio visual output LAN port 9 pin D Sub female RS 232C port IEC power connection 1 1 1 1 1 Power Connection IEC Requirement 100 240 VAC 50 60 Hz Consumption 15 W typical lt 0 5 W standby Environmental Conditions Operating temperature 41 95 F 5 35 C Operating humidity 25 85 no condensation Dimensions width x depth x height with rack ears 19 00 x 10 75 x 1 73 483 mm x 273 mm x 44 mm Weight with rack ears 5 9 Ibs 2 7 kg 134 Trademarks and Licenses Denon is a trademark of D amp M Holdings Inc registered in the U S and other countries Blu ray Blu ray Disc and the logo are trademarks of the Blu ray Disc Association Dolby and the double D symbol are registered trademarks of Dolby Laboratories DivX and the DivX Ma
20. dio and video signal from an external device Use a standard coaxial cable to make this connection 6 LAN Port This input lets you connect a host device usually a computer to DN 500BD You can use the host device to control DN 500BD via commands sent from it Alternatively use this connection to access the internet Use a standard Ethernet cable to make this connection 7 USB Input This input receives the audio and video signal from a connected USB device Use a standard USB cable to make this connection 8 Remote Input This input lets you connect a host device usually a computer to DN 500BD You can use the host device to control DN 500BD via commands sent from it using RS 232C serial communication Use a standard Ethernet cable to make this connection 9 AC In Use the included power cable to connect this input to a power outlet See Setup gt Connections for more information Remote Control Important Point the remote control at the remote sensor when operating it If the DENON remote sensor is exposed to direct sunlight strong artificial light like from an PROFESSIONAL interverter type fluorescent lamp or infrared light the unit or remote control may o not function properly 1 11 12 13 14 15 16 17 18 19 20 21 Home Press this button to open the Home screen See Operation gt Getting Homi ED Qo voL Power Press this button to turn DN 500BD on off The lig
21. e buttons control the output level of the audio outputs and 7 1 outputs only If To change the audio setting press Audio on the remote control The current audio setting will appear in the upper left corner of the screen Each press after that will select the next available setting The available settings depend on the supported audio configurations of your video For example a video file may let you select Stereo Mono Left or Right while a Blu ray Disc may let you select DTS HD MA Master Audio or Dolby Digital in various languages This feature is available during video playback only Alternatively change the audio setting in the Options menu See Adjusting the Settings gt Options to learn how to do this To select the language of the audio used with the Picture in Picture feature press 2nd Audio on the remote control Picture in Picture feature lets you view additional content in a small screen within the normal screen during playback This feature is available only on discs that support it Alternatively enable disable this feature in the Options menu See Adjusting the Settings gt Options gt BDMV Options to learn how to do this Adjusting the Picture To change the picture resolution press HDMI on the remote control Each press will select the next available resolution Auto DN 500BD will detect the optimal resolution automatically 480i 576i 480p 576p 720p 1080i or 1080p Alternatively change the resolution
22. elow network connections see Network Setup below or DN 500BD itself see Device Setup below To enter the Setting menu do either of the following e While on the Home screen use the left right cursor buttons lt gt on the remote control to select Setting and then press OK e Press Setup on the remote control This is disabled while a disc is playing video 20 In the Setting menu use the remote control to do any of the following Use the left right cursor buttons lt P to select one of the five icons at the top of the window Playback Setup Video Setup Audio Setup Network Setup or Device Setup Selecting each icon will show the relevant menus and settings in the window below it Press OK or the down cursor button V to view and edit those settings To move through a list use the up down cursor buttons AW The current item is outlined in blue If there is an arrow to the right of an item gt you can press the OK or the right cursor button DP to open a submenu with additional options If there is an arrow to the left of an item 4 you can press left cursor button 4 to return to the next highest menu In a submenu a circle is next to the currently selected option You can use the up down cursor buttons AW to select a different option Press OK to confirm your choice or press the left cursor button 4 to return to the next highest menu without changing anything Playback Setup Power On Mode
23. er left corner of the screen Each press after that will select the next available setting The available settings depend on the supported audio configurations of your video For example a video file may let you select Stereo Mono Left or Right while a Blu ray Disc may let you select DTS HD MA Master Audio or Dolby Digital in various languages Subtitle Press this button to show the current subtitle language in the upper right corner of the screen Each press after that will select the next available subtitle language Select Off to disable the subtitles Title Popup Press this button to view the disc s title menu without stopping playback Disc Menu Press this button to stop playback and return to the disc s main top menu PIP Press this button to enable disable the Picture in Picture feature Random Press this button to cycle through the Random modes See the Operation chapter for more information Repeat Press this button to cycle through the Repeat modes A B Use this button to loop a section of video or audio during playback Prog Press this button to show the Program page which lets you select tracks that will play in a specific order See Operation gt Playing Audio Discs gt Additional Functions for more information Mark Press this button to mark a location of a video Zoom Press this button to zoom in or out of the picture Each press will select the next available zoom distance 2x 3x 4x 1 2 1 3 and
24. er or access point Information This option opens a window that shows the following information about your internet connection Interface Address Type IP Address Subnet Mask Default Gateway DNS1 and DNS2 If DHCP is set to Off you can enter this information manually with the remote control See below Press Return to return to the previous menu Connection Test Select this option to check DN 500BD s connection to the internet 0 Device Setup DHCP When set to On DN 500BD will obtain IP address information via Dynamic Host Configuration Protocol DHCP When set to Off you must enter the IP address Subnet Mask Default Gateway DNS1 and DNS2 manually Use the left right cursor buttons lt gt to move between the squares Use the number buttons 0 9 to select numbers for each square Press the down cursor button V to delete a number Press OK to confirm the entire address Press Return to cancel and return to the previous menu Wireless Setting Select how you want to connect to the wireless network Scan display available networks Manual enter the network service set identifier SSID manually or Auto connect automatically to an available network The Interface setting see above must be set to Wireless If you select Auto select how you will connect to the network PBC press the WPS Reset button on your router within 120 seconds of selecting Next or PIN enter the PIN shown on the screen
25. firm that you want to use that resolution If you do not do this within 12 seconds the resolution will return to the previous setting 7 On Page 5 select your TV s aspect ratio Once you press OK the aspect ratio will change and you continue to Page 5 If you do not want to use that aspect ratio press Skip Back K 4 to return to the previous page and select a different one 8 On Page 6 press OK to view the Home screen and start using DN 500BD or press Skip Back Kd to return to the previous page Operation If the unit is off press the Power Button to power it on Getting Started Home Screen To select what kind of media you want to play 1 On the remote control press Home to open the Home screen 2 Press the left right cursor buttons lt P on the remote control to move through the options e Blu ray Disc Select this to play a video disc in the standard Blu ray or DVD format e Media Center Select this to browse the contents of a USB drive mass storage class with video audio or picture files e Setting Select this to open the Setting menu for DN 500BD 3 To confirm your choice press OK on the remote control Playing Video Discs DN 500BD can play and view the following video disc formats Supported Blu ray Disc formats BD25 BD50 BD ROM BD R BD RE Supported DVD formats DVD DVD R DVD R DVD RW DVD RW See the Basic Functions section to learn some basic operations See Additional Functions to learn m
26. g of the current chapter To skip to the previous chapter press Skip Back K lt twice on DN 500BD or the remote control though if you are within the first few seconds of the current chapter you can press it just once If Chapter Repeat is on described later this will skip to the beginning of the current chapter To return to the beginning of the chapter press Skip Back 4 once on DN 500BD or the remote control If you are within the first few seconds of the current chapter though doing this will skip to the previous chapter Additional Functions To view the disc menu press Disc Menu on the remote control This will stop playback To view the title menu without stopping playback press Title Popup on the remote control To select a Repeat mode press Repeat on the remote control or press Shift and Skip Back K 4 on DN 500BD It will cycle through 3 modes e Off Normal operation e Chapter Repeat CH The current chapter will repeat continuously In this Repeat mode CH pressing will Skip Back Forward K 4 P1 will skip to the beginning of the current chapter eu only e Title Repeat TT The current title will repeat continuously E To loop a section of the video 1 Set the desired starting point by pressing A B on the remote control or press Shift and Skip Forward b l on DN 500BD A will appear on the screen 2 Set the desired ending point by pressing A B again or pressing Shift and Skip Forward gt l
27. ht above the button on DN 500BD will be red when it is off or green when it is on Make 2 G sure the AC In is properly connected to a power outlet Do not turn the unit off during media playback doing so could damage your media Mute 14 Press this button to mute DN 500BD s audio If this button does not 7 2 work set the Output Volume to Variable instead of Fixed see Adjusting the Settings gt Setting gt Audio Setup to learn how to do this 0 Eject 4 Press this to eject the disc tray HDMI Press this button to select the next available picture resolution Auto DN 500BD will detect the optimal resolution automatically 480i 576i 480p 576p 720p 1080i or 1080p 2nd Audio Press this button to select the language of the audio used with the Picture in Picture feature This feature is available only on discs that support it See Operation gt Adjusting the Sound for more information O gt Volume Press these buttons to lower or raise the volume respectively If these buttons do not work set the Output Volume to Variable instead of pai Fixed see Adjusting the Settings gt Setting gt Audio Setup to learn how to S do this Number Buttons 0 9 Press these buttons to enter their corresponding numbers While playing media and not viewing an additional menu or screen Gea entering a number or numbers will select that disc chapter or audio track G DENON PROF
28. ia Center and then press OK The Media Center will appear on the screen 4 Do any of the following in the Media Center e Use the up down cursor buttons A V to move to the previous next item in a list e Press OK or Play to enter a selected folder e Press the left cursor button 4 or Return to return to the next highest folder one level above the current one Alternatively use the up cursor button A to move to folder labeled at the top of the list and then press OK or Play gt e Press OK or Play to play a selected file If you have previously played the file and stopped it before the end the file will start playing from that point e Press Title Popup to view options related to creating a playlist See Additional Functions below to learn about this e Press Home to return to the Home screen While using the Media Center you cannot use any buttons on DN 500BD or the remote control other than the ones described above To stop playback press Stop m on DN 500BD or the remote control To pause playback press Pause 11 on DN 500BD or the remote control To resume playback press Pause Il or Play on DN 500BD or the remote control While viewing pictures these buttons let you pause or resume playback of the slide show To rewind or fast forward press Search Back Forward P on the remote control Each time you press the same button the speed will increase You can do this up to 5 times befo
29. in the Setting menu See Adjusting the Settings to learn how to do this To enable disable the Picture in Picture feature press PIP on the remote control This feature lets you view additional content in a small screen within the normal screen during playback This feature is available only on discs that support it Alternatively enable disable this feature in the Options menu See Adjusting the Settings gt Options to learn how to do this To change the zoom distance press Zoom on the remote control Each press will select the next available zoom distance 2x 3x 4x 1 2 1 3 and 1 4 When no zoom distance is shown on the screen the picture is at its normal zoom distance To change the camera angle press Angle on the remote control to select the desired angle This feature is available only on certain DVD or Blu ray Discs Alternatively enable disable this feature in the Options menu See Adjusting the Settings gt Options to learn how to do this Other Features Lock The Lock feature disables almost all of the buttons on DN 500BD s front panel This helps prevent accidental changes to playback To enable disable the Lock feature press and hold Shift and then press Stop on DN 500BD s front panel When Lock is enabled the Lock light to the right of the display will turn on While Lock is enabled you can still do the following e Disable the Lock feature on the front panel e Power off DN 500BD using Power button on
30. ing the NTSC standard or 50 Hz for locations using the PAL standard When set to Off DN 500BD will always play 1080p 24 Hz Blu ray video at 24 Hz Your TV must support 1080p 24 Hz Blu ray video for this to work properly Important This option applies only to the HDMI output at a 1080p resolution DVD 24p Conversion When set to On DN 500BD will convert the frame rate of a 1080p DVD video playing at 24 Hz to 60 Hz for locations using the NTSC standard or 50 Hz for locations using the PAL standard When set to Off DN 500BD will always play 1080p 24 Hz DVD video at 24 Hz Your TV must support 1080p 24 Hz DVD video for this to work properly Important This option applies only to the HDMI output at a 1080p resolution HDMI Color Space Select the color space for the HDMI output RGB PC Level standard for most computer displays YCbCr 4 4 4 color space YCbCr 4 2 2 the closest approximation to the original color space of video discs or RGB Video Level standard for most video displays HDMI Deep Color Select the Deep Color mode for the HDMI output 30 bits 36 bits 48 bits or Off 24 bits Each setting indicates the total bit depth that an HDMI v1 3 picture will use Using a higher bit depth usually improves gradients and color transitions Your TV must support HDMI v1 3 for this feature to work properly Close Caption 0 CC Attribute When set to Auto the closed captioning feature will use the default font size colors
31. into the software control panel for your wireless router or access point Proxy Setting When set to Disable DN 500BD will not use a proxy server When set to Enable DN 500BD will use a proxy server with the information in the Proxy Host and Proxy Port windows Proxy Host Use the cursor buttons 4P AW to move between the buttons in the window Press OK to press that button Press Return to return to the previous menu Proxy Port Use the number buttons 0 9 to select numbers for each square Press Return to return to the previous menu e Firmware o Version DN 500BD s current firmware version o Upgrade When you are upgrading DN 500BD s firmware select how DN 500BD will access the firmware file Disc USB Storage or Network Follow the instructions included with the firmware update file e Setting o Remote Control Code If you are using other similar Denon Professional products that unintentionally respond to DN 500BD s remote control select a different remote control code to keep its communication separate Code 1 Code 2 or Code 3 o HDMI CEC When set to On DN 500BD s remote control can send commands to DN 500BD as well as a TV connected to the HDMI output your TV must support HDMI CEC When set to Off DN 500BD s remote control will send commands to DN 500BD only o Setup Management Select Export to save all of DN 500BD s current settings as a bin file on a connected USB drive Select Import to import a
32. isc HDCD Super Video CD SVCD Video CD VCD Supported File Formats Video 3gp asf avi dat divx mkv mov mp4 mpg m2ts ogm rmvb tp ts wmv Subtitles ass smi srt ssa sub Audio ape flac m4a AAC mp3 wav Picture gif jpg or jpeg png Supported File Systems FAT16 FAT32 NTFS USB drive mass storage class with lt 2 TB total capacity Video Resolutions Auto 480i 576i 480p 576p 720p 1080i 1080p Aspect Ratios 16 9 Full 16 9 Normal 4 3 Pan amp Scan 4 3 Letterbox System NTSC PAL Multi if supported by TV HDMI Color Space RGB PC Level RGB Video Level YCbCr 4 4 4 YCbCr 4 2 2 Output HDMI gt v1 4 3D HDCP 1 4 Decoding Video DivX 3 4 5 6 DivX HD MPEG 1 MPEG 2 MPEG 4 MPEG 4 AVC H 264 VC 1 Windows Media Video Xvid Audio AAC Dolby Digital Dolby Digital Plus Dolby TrueHD DTS Digital Surround DTS HD WMA 133 Audio Analog Outputs Output Level balanced XLR 4 dBu 1 786 dBV Output Level unbalanced RCA 6 dBV Digital Output Output Level coaxial 0 5V 75 Q Signal Format AES EBU Surround Audio DTS Master Audio DTS HD High Resolution Audio DTS Digital Surround Dolby TrueHD Dolby Digital AC 3 Dolby Digital Plus 7 1ch Frequency Response 20 Hz 20 kHz 0 5 dB Signal to Noise Ratio gt 100 dB A weighted Total Harmonic Distortion lt 0 05 Dynami
33. lectrolyte touches your skin or clothes immediately wash with tap water and consult a physician Before discarding a battery insulate it with tape etc and dispose of it in a place without fire by following the directions or regulations laid down by the local authorities in the area of its disposal Setup Connections USB hard drive sound system Power DENON DENON ENON wy N ENON Powered Monitors receiver amp etc TV or display Modem Items not listed in Introduction gt Box Contents are sold separately Important Connect all cables securely and properly with stereo cables left with left right with right Do not bundle or wrap them with the power cable Not all of these steps may apply to your specific audio video setup but you will need to do Steps 1 and 5 at the very least 1 Connect DN 500BD to your TV monitor or display by doing one of the following Use an HDMI cable to connect the HDMI Output to the HDMI input of your TV monitor or display e Use a coaxial HDMI cable to connect the coaxial output to the coaxial input of your TV monitor Optional Connect DN 500BD to your sound system by doing either both of the following Use XLR cables or
34. m your choice and close the submenu If there is not an arrow to the right side of an item you can press OK to cycle through the available options or to execute the command BDMV Options 26 Title The number on the left is the currently playing title which you can change The number on the right is the total number of titles Chapter The number on the left is the currently playing chapter which you can change The number on the right is the total number of chapters Time Use this to show the time as the elapsed time for the title TT remaining time for the title TT elapsed time for the chapter CH or remaining time for the chapter CH Audio The available settings depend on the supported audio configurations of your video For example a video file may let you select Stereo Mono Left or Right while a Blu ray Disc may let you select DTS HD MA Master Audio or Dolby Digital in various languages Angle The number on the left is the current angle which you can change if available The number on the right is the total number of available angles This feature is available only on certain DVD or Blu ray Discs Subtitles The available settings depend on the supported subtitle languages of your video Subtitle Style The available settings depend on the supported subtitle languages of your video Second video PIP Use this to enable On or disable Off the Picture in Picture feature This feature lets you view addi
35. o DVD CD Auto Play When set to On a disc will start playing automatically after you insert it When set to Off you will have to start disc playback manually after inserting it Setting o PIP Mark When set to On the screen will show a mark to indicate that there is secondary video you can view using the Picture in Picture feature When set to Off these marks are disabled though you can still use the Picture in Picture feature o Auto Resume When set to On DN 500BD will remember where you stop playing a disc When you start playing that disc again you can choose to start from that point or from the beginning of the disc DN 500BD can do this for up to 5 discs replacing the oldest one if it needs to remember a new one When set to Off this feature is disabled Language o OSD The language of the text shown in DN 500BD s menus screens windows etc o Menu The language of the text shown in disc menus The disc must be able to display the selected language for this feature to work properly o Audio The language of the audio on a disc The disc must be able to play audio in the selected language for this feature to work properly o Subtitle The language of the subtitles shown during video playback The disc must have subtitles for the selected language for this feature to work properly Security o Change Password Select this to change the parental control password which must be 4 digits Use the number buttons 0 9 to
36. ogram e Press OK on the remote control to unlock the current slot of the Program outlined in yellow Use the up down cursor buttons A V or number buttons 0 9 to enter the desired track and then press OK to confirm your choice e If the current slot of the Program outlined in yellow contains a track number press Clear on the remote control to clear that slot While viewing the Program page you cannot use any buttons on DN 500BD or the remote control other than the ones described above Playing Files Video Audio or Picture DN 500BD can play and view the following file formats on a USB drive mass storage class Supported video file formats 3gp asf avi dat divx mkv mov mp4 mpg m2ts ogm rmvb tp ts wmv Subtitle formats for video ass smi srt ssa sub Supported audio file formats ape flac m4a AAC mp3 wav Supported picture file formats gif jpg or jpeg png Important The USB drive must use a FAT16 FAT32 or NTFS file system See the Basic Functions section to learn some basic operations See Additional Functions to learn more advanced ones Basic Functions To browse your files and play a file 1 Gently insert a USB drive to the USB port on the front panel or rear panel The display will show USb In when DN 500BD recognizes the USB drive Press Home on the remote control to view the Home screen Use the left right cursor buttons lt P to select Med
37. or playlist Time Use this to show the time as the elapsed time for the file or remaining time for the file Mode Use this to select a playback mode Normal Random or Shuffle Bitrate Use this to show the current bitrate of the audio Ins Search Press OK to scan slowly through the audio Ins Replay Press OK to jump back 10 seconds in the audio Picture File Options 28 File The number on the left is the currently shown picture file which you can change The number on the right is the total number of picture files in the folder Mode Use this to select a playback mode Normal Random or Shuffle Slide Show Rate Use this to select a speed for the slide show Slow Middle medium or Fast Transition Use this to select how the slide show moves from one picture to another None Box In Wipe Left Box Out Wipe Right Blending Wipe Up Dissolve Wipe Down Interlace H horizontal Interlace V vertical Split In H horizontal Split In V vertical Split Out H horizontal Split Out V vertical Appendix English Technical Specifications All specifications are subject to change without notice Digital System System Digital media player Blu ray Disc DVD CD USB device mass storage class AVCHD playback format Supported Disc Formats Blu ray Disc BD25 BD50 BD ROM BD R BD RE DVD DVD DVD R DVD R DVD RW DVD RW CD CD CD R CD RW DTS Music Disc DTS Audio CD 5 1 Music D
38. ore advanced ones Basic Functions Important Do not place heavy objects on top of DN 500BD Doing so can cause issues with disc playback or damage the unit To play a disc 1 Press Eject 4 on DN 500BD or the remote control to open the disc tray 2 Insert a disc into the disc tray and press Eject 4 on DN 500BD or the remote control again to close it The display will show LoAd when the disc is loading and then bdnU when the disc is loaded 3 If DN 500BD has not played the disc before it will start playing automatically If DN 500BD has played the disc before you can do either of the following e Press Return on the remote control to play the disc from the beginning e Press OK on the remote control to play the disc from the point where you last stopped it To stop playback press Stop m on DN 500BD or the remote control To pause playback press Pause 11 on DN 500BD or the remote control To resume playback press Pause Il or Play on DN 500BD or the remote control To rewind or fast forward press Search Back Forward 44 gt gt on the remote control Each time you press the same button the speed will increase You can do this up to 5 times before it returns to normal playback speed To resume playback press Play on DN 500BD or the remote control To skip to the next chapter press Skip Forward gt gt I on DN 500BD or the remote control If Chapter Repeat is on described later this will skip to the beginnin
39. ory You can set up to 12 bookmarks and then jump to those locations directly saving you the time of scanning through the video later To create a bookmark press Mark on the remote control at the desired location during video playback The screen will show the number of the bookmark current title current chapter and current time To jump to a bookmark 1 Press and hold Mark on the remote control for 6 seconds Playback will pause and the available bookmarks will appear on the screen 2 Use the left right cursor buttons lt P to move through the bookmarks When you select a bookmark you will see the current title current chapter and current time above it The available bookmarks are white and unused bookmarks are gray 3 Press OK to jump to the desired bookmark Playback will resume from that bookmark s location To cancel the operation and return to normal playback press Mark To erase a bookmark _ Press and hold Mark on the remote control for 6 seconds Playback will pause and the available bookmarks will appear on the screen N Press Clear to erase the last created bookmark w Press Mark to close the bookmarks and return to normal playback DENON PROFESSIONAL Adjusting the Sound To adjust the volume use the Vol buttons on the remote control Alternatively use the volume adjustment controls on your TV your TV s remote control your audio receiver or amplifier etc portant Thes
40. previously saved bin file of DN 500BD s settings from a connected USB drive o Reset Factory Defaults Select OK to erase all of DN 500BD s current settings and restore its original default settings or select Cancel to keep the current settings If you select OK you will see the Initial Wizard screen as you did when you first set up DN 500BD Serial Bit Rate Select the serial bit rate 9600 or 38400 25 Options The Options menu lets you change certain settings during playback without having to enter the Setting menu The menu will appear on the left side of the screen The available Options will vary based on the kind of media you are currently using DVD or Blu ray Disc see BDMV Options below video file see Video Options below audio CD see Audio CD Options below audio file see Audio File Options below or picture see Picture File Options below To show hide the Options menu press Option on the remote control Alternatively press Return to close the Options menu In the Options menu To move through a list use the up down cursor buttons AV The current item is outlined in blue If there is an arrow to the right of an item gt you can press the OK or the right cursor button P to open a submenu with additional options In a submenu if there are arrows above or below it you can use the up down cursor buttons AW to select the previous next option Press OK or the left cursor button 4 to confir
41. re is available only on discs that support it e Format o HDMI Audio Select the format of the audio sent from the HDMI output Stereo PCM recommended when the HDMI output is connected directly to your TV or to a receiver without advanced encoding or Bitstream recommended when using an audio video receiver or processor that supports advanced encoding such as DTS HD Master Audio or Dolby TrueHD Coaxial Optical Output Select the format of the audio sent form the coaxial output 48K supported by most audio equipment 96K a higher sampling rate with a wider frequency response 192K the highest sampling rate with the widest frequency response or Bitstream recommended when using an audio video receiver or processor that supports advanced encoding such as DTS or Dolby Digital e Sound Control 0 Crossover Select the crossover frequency for your sound system Off 40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz 175Hz 200Hz or 250Hz Any audio content whose frequency is lower than this setting will be sent to your subwoofer if any Dynamic Range When set to On DN 500BD will apply some compression to smooth out the high and low volume levels of the audio When set to Off DN 500BD will not use any compression When set to Auto DN 500BD will use the compression specified by the Blu ray Disc being played for other discs there will be no compression Important This option applies to the audio outputs and 7 1 outputs
42. re it returns to normal playback speed To resume playback press Play on DN 500BD or the remote control While viewing pictures these buttons let you change the speed of the slide show Slow Middle or Fast To skip to the next file press Skip Forward gt gt I on DN 500BD or the remote control To skip to the previous file press Skip Back k44 twice on DN 500BD or the remote control though if you are within the first few seconds of the current file you can press it just once While viewing pictures press this button only once instead of twice To return to the beginning of the file press Skip Back K 4 once on DN 500BD or the remote control If you are within the first few seconds of the current file though doing this will skip to the previous file While viewing pictures pressing this button will skip to the previous file While playing an audio file the screen will show the following information File Name Type file format Total Time Title Artist Album and Genre The last four items are usually included as ID3 tags but are not always present in all audio files If the file is missing an ID3 tag the field will be blank While viewing a picture you can do the following e Press the up cursor button 4 to flip mirror the picture vertically e Press the down cursor button V to flip mirror the picture horizontally e Press the left cursor button 4 to rotate the picture 90 counterclockwise e Press the
43. ring playback See the Operation chapter for more information Stop H Press this button to stop playback Press and hold Shift and press this button to enable disable the Lock feature See Other Features for more information Pause II Press this button to pause playback Press and hold Shift and press this button to enable disable the IR Lock feature See Other Features for more information Play gt Press this button to start or resume playback Press and hold Shift and press this button to enable disable the Hide OSD feature See Other Features for more information Rear Panel AUDIO OUTPUT 1 Audio Outputs balanced XLR These outputs send the audio signal to your external speakers receiver etc Use XLR cables to make these connections See Setup gt Connections for more information 2 Audio Outputs unbalanced RCA These outputs send the audio signal to your external speakers receiver etc Use RCA cables to make these connections See Setup gt Connections for more information 3 7 1 Outputs unbalanced RCA These 8 outputs send the audio signal to your 7 1 surround sound system Use RCA cables to make these connections Please refer to the documentation for your sound system as well 4 Coaxial Output This output sends the digital audio and video signal to your TV Use a standard coaxial cable to make this connection 5 HDMI Output This output sends an HDMI au
44. rk are trademarks or registered trademarks of DivX LLC and its affiliates in the United States and other countries and is used under license DTS HD Master Audio and the Symbol are trademarks or registered trademarks and is a trademark of DTS Inc The terms HDMI and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Java is a registered trademark of Oracle and or its affiliates All other product names company names trademarks or trade names are those of their respective owners denonpro com Manual Version 1 3
45. ss Random on the remote control It will cycle through 3 modes e Shuffle Tracks on the CD will play in a random order without repeating When all tracks on the CD have played playback will stop unless a Repeat mode is selected e Random Tracks on the CD will play in a random order Playback will continue indefinitely Also tracks will also be allowed to play more than once e Off Normal operation To loop a section of the track 1 Set the desired starting point by pressing A B on the remote control or press Shift and Skip Forward gt I on DN 500BD A will appear on the screen 2 Set the desired ending point by pressing A B on the remote control again or press Shift and Skip Forward PI on DN 500BD again A B will appear on the screen and the loop will start and repeat continuously 3 To stop the loop press A B on the remote once more or press Shift and Skip Forward b l on DN 500BD once more A B will disappear from the screen and playback will continue normally To jump to a specific track of the disc 1 Use the number buttons 0 9 on the remote control to select the number of the desired track 2 Toconfirm your choice press OK or wait a few seconds The desired track will start playing To cancel press Clear To jump to a specific track or time of the disc 1 Press GoTo on the remote control The Information panel will appear at the top of the screen To cancel the operation before selecting a track or
46. tional content in a small screen within the normal screen during playback This feature is available only on discs that support it Second audio Use this to enable On or disable Off the audio used with the Picture in Picture feature This feature is available only on discs that support it Bitrate Use this to show the current bitrate of the video or audio still Off Use this to turn the picture of a video off while allowing its audio to remain playing You can enable On or disable Off this feature but it is supported only by some video discs Ins Search Press OK to scan slowly through the video Ins Replay Press OK to jump back 10 seconds in the video CC Select Use this to select a closed caption setting Off Analog CC 1 4 Video Options File The number on the left is the currently playing video file which you can change The number on the right is the total number of video files in the folder Title if available The number on the left is the currently playing title which you can change The number on the right is the total number of titles Chapter if available The number on the left is the currently playing chapter which you can change The number on the right is the total number of chapters Time Use this to show the time as the elapsed time or remaining time If there are titles and chapters you can show the elapsed time for the title TT remaining time for the title TT elapsed time for the chapter
47. y If this happens let the unit sit for an hour or two while powered off and wait until there is little difference in temperature before using the unit Cautions on using Using a mobile phone near this unit may cause noise If this occurs move the mobile phones mobile phone away from this unit when it is in use Moving the unit Before moving the unit turn off its power and disconnect the power cable from the power outlet Next disconnect its connection cables from other devices before moving it About care Wipe the cabinet and control panel clean with a soft cloth Follow the instructions when using a chemical cleaner Do not use benzene paint thinner insecticide or other organic solvents to clean the unit These materials can cause material changes and discoloration Rackmount warnings EIA standard 19 inch 483 mm rack required rack specifications 1U size installation compatible rack for mounting the unit in a f rack Rack that has a guide rail or shelf board that can support this device Rack installation This product will work normally when the player unit is mounted within 10 off the vertical plane at the front panel If the unit is tilted excessively the disc may not load or unload properly See image Maximum 10 Features Front Panel 05 gt 099 l eE lt nn DN 500BD 10 11 12 13 BLU RAY DISC

DN-500BD User Guide

Contents

Download Pdf Manuals

Related Search

Related Contents