petSCAN RT100 User guide
Contents
1. Congratulations you are now the owner of a petSCAN RT100 This reader can read all microchip implants of the FDX B type conforming to the ISO norm 11784 intended to pets identification As you can see the product is easy to use Language choice Hold the petSCAN and press about 5 seconds with thumb or index finger right handed or left handed person the blue button located on the left side of the reader The reader will display successively different languages When your language is displayed release the button The reader wil your choice beep confirming Reading a transponder Switch on the reader by pressing the blue button about 2 seconds The reader will then be activated After shortly displaying the language choosen by the user the following message will appear on the display Press SCAN to read By pressing the button another time the reader will start to search for a microchip The following message will be displayed on the LCD screen Reading Keep the reader in your hand and bring the reader s aerial near the animal s body Scan slowly the area where a microchip is expected to be found while keeping the reader for a few centimeter s distance from the animal s skin The reader will be scanning for about 15 seconds Once the reader has finished searching two situations can arise 1 If a microchip has been found the reader will beep and2. the unique identication number is displayed Tag FDX B 826 000035672989 In the example shown the reader indicates that the chip found is of FDX B type The identification number will always be 15 digits The first three digit indicates either the international country code or the manufacturer code attributed by ICAR International Committee for Animal Identification In this case 826 is Great Britain code RealTrace Electronic identification of companion animals with microchip implants petSCAN RT100 Microchip reader User guide AA RealTrace TAG TECHNOLOGY srl Email info tagtechnology it T l 39 039 6957454 Fax 39 039 6820475 The idenfication number will remain displayed on the LCD screen for about one minute before the reader switches off automatically While displaying a new press on the button re activates reading Warning once the reader is switch off it will not be possible to display the last identification number read again 2 If no microchip has been found after 15 seconds searching the reader will beep three times and the following message will be displayed on the screen No tag found The LCD screen will stop displaying the message after about 15 seconds If this situation arise try finding the microchip again To do so you must re activate the reader by pressing the button Scan the possible microcip implantation area with as large a sweeping movement as
3. possible If necessary repeat the operation after having re activated the reader again Replacing the battery Only use 9V alkaline batteries of the PP3 type If the battery is running low the reader will beep twice and will display every five readings the following message Low battery When the battery is too low the reader display this message and switch off immediatly To replace the battery open the battery compartment situated under the reader and replace the used battery with a new one Close the battery compartment and check that the locking mechanism is in place Technical specifications Conforming to CE norms and ISO 11784 controlled by CETIM CE Dimensions L 15cm W 8cm H 3 5cm Weight 140 grams Power standard 9 Volt alkaline or lithium battery PP3 Reading distance 8 to 10 centimeters Depending of the manufaturer microchip Temperatures Storage conditions 40 C to 70 C Usages conditions 5 C to 40 C Made in China
Download Pdf Manuals
Related Search