Home

SOFTWARE USER GUIDE

1. Select Route Info to access waypoints and route info report Use the button to open the Find Destination screen Use Elevations in order to see the elevations profile Use Instructions to access the route manoeuvres list containing descriptive amp text indications of all route turns Waypoints opens the Waypoints Info screen Choose Waypoint Zoom to see the selected waypoint on the map at an adequate zoom scale and Route Zoom to see the whole route Skip waypoint If in the Settings the Skip Waypoint mode has been activated in navigation with a calculated route touch the button to delete the next waypoint and start an automatic recalculation of the route Highway Information From Settings gt Map Elements gt Indicators gt Route it is possible to activate deactivate highway information The following information is always displayed along a highway IV the two next exits and the relating distances the last exit of the route is highlighted in red to warn the user to pay attention see image on the left s the two next service areas with the relating distances The distance time remaining to destination and the expected time of arrival are also indicated NOTE highway information is available during navigation when a route is calculated only when you drive along a highway Highway information is not available in 3D view To disable on screen information Main Menu
2. To register the intermediate value of a trip press at start the recording of the lap data will become active At the end of the first lap press Lap to fix the intermediate values and start the following recording of the lap data At each pression on the Lap button the value recorded in the previous lap will be shifted in the lower corner of the window so to have the intermediate values made always at hand TOTALS VALUES The mode Totals values gives the overall values recorded till that moment The trip keeps in memory the data of the Current values page even after a reset summed up to the Lap data The value can be deleted from the display using Reset at every time Doing a reset the data are deleted from the display but archived in the Trip History Par 6 4 5 TRIP VALUES ON THE MAP ni As described in Par 6 5 6 the user can decide which elements of the trip computer are to be visualized in the map menu for an easier consultation during navigation see image on the left TRIP COMPUTER AND VALUES LINKED TO THE USER PROFILE AT START The values visualized by default in the trip computer vary according to the active user profile Each profile is designed to respond in the most suitable way to the user needs In the following table there is an overview of the profiles and the relating trip values 67 STREET PROFILE Odometer Movingtime Height Distanceto destination Timeto de
3. Bike GPS Navigator 7 USER S GUIDE PLEASE READ CAREFULLY THIS GUIDE BEFORE STARTING TO USE THE PROGRAM MYNAV STREET AND OUTDOOR NAVIGATORS 2010 ALL RIGHTS RESERVED TABLE OF CONTENTS 1 Important warnings 6 Eg EE 7 3 GPS signal reception 8 4 Select a destination and start navigation sseessssss 9 5 nsen A e EE a 10 6 Main Menu software funstions sseeene 11 6 1 CU RRRRRRRRRRRRRRRRREEEEEEEMMMMMMN 15 6 2 Find destination r essovrrrrnrrrrnnvrernrnvrrnnnvrennnvvennsnvnenrnvressnnresssnvesssnvressssressssvesens 21 6 9 ROLLS PIITBll flask oeste cn nt oca s eic bin er ear sp i a vn n nt 25 6 3 1 Create a new route rennen rne nnn nennt tns 25 6 32 EUS 1006 easier eiua tr ce ep reor in ue Eua Er eret er eu de eu e 30 6 3 3 Delete a route nnne nnn nnne nnns 30 6 3 4 Tours Preloaded on track ccccccccsscssssecseecssecsseseseeeseeesseseeeecseeesaeeenees 30 SCA Re 31 6 4 1 Favourites rr nnns 31 6 4 2 Saved Routes rrrrrersrrerrvrersnrerrsvenrnverrnverrsrerssveessrressvresssresssresssresssressnveene 31 5 4 9 360 CR 32 D MOON ao tu toda ia erdt Dist Do ba E E DOTE QRO ee 38 NK sv 40 ET 9 1016 PORN RN SN ERR peas ERON Gea ee 40 Rede eee 42 6 5 1 Map maragermelll ssexcuqecisina su Fi vtt t odd a oa eta Dor cn e 42 6 5 2 Video control rann 43 6 5 3 Map elements rannsaka 45 651 ROU en
4. Language About Product info Trip computer Interface layout configure Bike sensors settings MN 700 Data recording Altimeter GPS coordinates Lat lon Load camera Select profile at start Show at every start last Units Metric mile yard Restore original settings Personal data Profiles settings Restore active profile In the following paragraphs starting from Main Menu all the software functions are described map characteristics information available route calculation advanced functions tracks and geo notes recording trip computer elevation profiles etc Main Menu is displayed whenever you access VDO GP7 or directly from the map by using the MENU button The main menu includes all commands allowing a quick access to the application functions E Map ween Map viewing and consultation Find Destination Search destination and start navigation towards Addresses POIs Geo Notes Coordinates Recent destinations Favourites Outdoor elements etc 949 Route Planning wees Planning a route choosing waypoints and the way to connect them and to delete and edit a route previously set My Menu mw Personal data recording and management Points Geo Notes and Tracks stored by the user points collected among Favourites or Saved Routes and History Trip Computer data Settings Main software settings map customization view and menu route planning type and mode system settings and advanced c
5. Select Search to view a list of POI found by the system The search can also be performed by entering only the first letters of the name a list of occurrences will be displayed among which select the preferred one and choose to see it on the map or to display the linked detailed description when available By proximity to City and or Address Specifying the City Address VDO GP7 will list the POI in a range of 50 km from the selected point By proximity to GPS position This search condition allows to obtain the list of POI in a range of 50 Km of the GPS position By proximity to destination This search condition allows to obtain the list of POI in a range of 50 Km from destination NOTE search by proximity to destination is available if a route is calculated and a destination is selected 22 Whatever the mode selected for the search is the system will give an output list of fifty POI according to the chosen search criteria The buttons displayed on the Last POI Found mask allow to see information about the POI Detail to add the point to Favourite Favourites to display it on the map Map to use it as a route waypoint Waypoint or as the destination in quick navigation Route to Find Geo Notes To find a Geo Note as explained above for Points of Interest select the relevant category and then Continue to select search type e by name enter the name of the Geo Note or
6. After the copy rename the file Rename and select Load to open and use it Once the profile has been loaded start with the customization directly on the MyNav All the changes will be registered in the new profile Use Delete to cancel the profile defintively after selecting it the default profiles cannot be deleted 6 6 4 Restoring active profile If after customization the profile does not satisfy the present preferences anymore it will be possible to restore the previous profile In detail any modifications done can be cancelled to restore the profile as it was in its initial setting default profile copy Main menu gt Profiles gt Restore active profile Once the profile has been restored new settings for the profile can be introduced 6 6 5 Default Profiles The following table is a summary of all the preset features of each profile by default Street Outdoor Bike and Bike ANT for the VDO GP7 56 mortes Jsmer Tomor BME Toma MAP MANAGEMENT ems o Jum qm for VIDEO CONTROLS GPS Status GPS Status GPS Status E ee rent ENN ET EN ER ROUTE ori Jor m Jo Ju meae m w w fr mass jw m fm o awe vou ns Jim SYSTEM fone 1 BBC mee 1 CO pp ADVANCED Dese or w fm fm essem m m Je w 57 7 ELEVATIONS VDO GP7 provides a lot of bearing information elevation dat
7. FormatSC exe from the device 74 INTERPRETING THE MAP 12 12 1 LINES Highway Highway Toll free Main road Municipal subsidiary road Urban road Unpaved Roads Restricted roads Pedestrian Mountain bike path Mus Easy path mmm Medium path m m m Difficult path Path equipped with fixed me ow Regional boundary Railway River Lake sea mus Blue ski slope mn Green ski slope ms Cross country skiing track mmm Alpine skiing slope 75 nes Ski manoeuvre mus Ski lift umm Chair lift mmm Cableway JE 12 2 AREAS E aq Inner city a E q Industrial site Doo Sports facilities me E Glacier 12 3 POI STANDARD amp OUTDOOR i Board and Lodge E Transport Public Utility Area Pic Nic C Bar or Pub Campsite fl Coffee shop Grocerystore t Hotel Airport Autodealerships 2 Automobileclub Autoservice Maintenance uu Bordercrossing 8 Busstation Commuterrailstation Fermata Autobus e Corriere 2 Ferryterminal a Motorcycledealership Ambulatory t Cemetaries Li Churches Oratories Chapels e Cityhall Civic Communitycentre el Convention Exhibitioncentre Courthouse Embassy Highereducation Hospital 76 Malga Refreshments ie Refuge Baita Bivouac Restaurant n Tourist lodging 2 Winery Mountain passes P Parkinggarage House IP Parkinglot ip Park Ride Petrol Gasolinestation Publicsportsa
8. Ruler from Advanced Settings gt Video Controls see below Centre Map centres the GPS detected position on the map it is continuously displayed at the map centre In navigation press 6 to switch from map menu to navigation menu the map will be automatically centred Ruler provides a partial air distance between two or more map points selected sequentially Once the operation is completed the command can be disabled by touching the button again 16 2D 3D View with a single touch on the cyclical button 2D 3D view it is possible to switch quickly from 2D to 3D view and vice versa In 3D view keep the 2D 3D view button pressed to change the angle perspective of the bird 3D view With the GPS on and 3D view mode the rotation of the map is automatically activated Zoom out it reduces the map continuosly Zoom in it widens the map continuosly Panning Map dragging The map can be moved at any time both in 2D and 3D view simply by lightly touching the screen and dragging it continuous panning and panning with static map refresh see 6 5 1 With a route calculated the following additional button is displayed on the map Report Route Info to see all summary information about the calculated route destination total length travelling time as well as the partial and total length of each waypoint This button also allows viewing a text list of manoeuvres Instructions for the route to be follo
9. installed and active in the PC Geo Notes export in Web format To export your Geo Notes in Web format choose My Menu gt Geo Notes gt Export gt Web then select the categories corresponding to the Geo Notes you want to export In comparison with MyNav format export procedure it is not possible to include sounds and images Press Export and choose the name for the export file without specifying extension Once the export has been completed time may vary according to memory card speed and to the number of points involved a report will be displayed 35 Once the export has been completed time may vary according to memory card speed and to the number of points involved a report will be displayed e result status of export procedure e number of points processed e number of points exported e number of not valid and so not exported points Press Ok to quit Report to display the export summary In the memory card GeoNotes Export folder VDO GP7 will create a new folder with the name chosen for the export NOTE to see the content of the memory card during the export procedure it is necessary to use USB connection and to have Microsoft Active Sync installed and active in the PC Geo Notes import in VDO GP7 format To import lists of points of interest organized in VDO GP7 format select Memory Card gt My Geo Notes choose the file ascm and the categories corresponding to the Geo Notes
10. areas e lifts highway e hydrography site names paths then confirm with Save Settings 45 QUERIES ON HIDDEN LAYERS As described before MyNav permits to choose whether to visualize or not the different data layer paths streets etc on the map For a hidden layer the relating information will not be available if Hidden layers info is not active it enables to query all the elements even if they are hidden and so not visible on the map This feature is useful especially when raster maps are in use RASTER MAPS It visualizes a list containing all the raster maps available in the device it permits also to activate them on the map At first start up a default raster is available representing MyNav default shadings All the raster maps loaded by the user through MyNav Map manager PC software are also collected in this menu For further information relating MyMap loading please see the MyNav Map Manager user guide POI POINTS OF INTEREST z You can select POI to be displayed on the map entering the library of Standard POI Standard gt Select Group or choosing between Geo Notes stored by the user Standard POI groups are arranged into two levels groups of categories or single categories Select your favourite group using the relevant filters and for the group identify the categories MyNav will display the relating POI on the map It is also possible to choose the complete list Full list of the
11. available groups to visualize the complete list of groups see par 12 Interpreting the map Use the button All to enable all the POI Geo Notes categories and the button None to disable them all KEYS see Par 12 of this guide 46 6 5 4 Route AUTOMATIC RECALCULATION ON OFF In navigation mode it enables disables automatic route calculation when outside the route calculated Select whether to activate or not the automatic recalculation and confirmwith Save Settings SPEED CAMERAS ALERTS ON OFF The acoustic alarm for speed detection devices can be enabled or disabled with just a click When in mode ON the system alerts the user with an acoustic signal when the relevant POI is approaching verify if this feature is allowed in your country otherwise do not use this function Any liability is disclaimed for a use against the law FIND DESTINATION ADDRESS ALL TYPES It customizes Find Destination button function according to the type of search to be visualized only address or all the categories Par 4 For street navigators the default type is Address DEFAULT ROUTE TYPE ASK ALWAYS TYPE From this menu it is possible to choose which type means to use by default for route calculation The type selected will be maintained in all the next route calculations till further changes Selecting Ask always MyNav will always ask the user during route planning which mean ty
12. card or in the device memory and associate it to the Geo Note dimension 320 240 pixel resolution 72 96 pixel press Add to load the image and associate the file Audio allows to add an audio file WAV stored in the memory card or in the device memory following the same procedure described for images With Notes the user can add a short text description too NOTE we recommend to add images and audio files stored in the Memory Card to avoid an unintentional removal For each element added to a Geo Note on the relating button Image Audio Note a flag to signalling that something has been added will appear Geo Notes map visualization and search To see Geo Notes on the map select the relevant category from My Menu gt Geo Notes gt See on the map and then Map All and None to select de select all the categories To find Geo Notes see Par 6 2 Geo Notes Management Geo Notes as VDO GP7 Default POI are grouped into categories following a simple tree structure Categories gt Geo Notes to support a correct filing and simplify the search procedure All the activities concerning POIs groups can be done from My Menu Geo Notes gt Manage In the upper part of the management window the list of the categories available with their peculiar icons will appear The arrow buttons allow to scroll the list and choose the favourite category selected the categories you can rename dele
13. device is switched off and it is automatically updated at the first GPS fix GPS STATUS GPS Status menu allows to e check the number of currently received satellites and the signal strength red bars e enable disable communication with the GPS device ON OFF button e view information about coordinates direction altitude speed 48 KEYBOARDS Two different options are available for keyboards representation QWERTY or ALPHABETICAL ORDER ABC Use your favourite one keeping into consideration that the choice can influence usability with different display orientation landscape portrait LANGUAGE To change the language pre set for the software see the list of the available languages Italian English French German and Spanish Select the flag relating to the new language to be used and confirm your choice OK Use the arrows to scroll the list of the available languages After the language confirmation a warning message which advises to restart the software to validate the changes will appear Select OK to restart VDO GP7 or choose Cancel to go back to the language selection window i J ABOUT PRODUCT INFO It contains program relevant information such as the map installed software version Activation Code etc We recommend to copy the Activation Code and to preserve it in a safe place for any future use ______ 6 5 6 Advance Settings TRIP COMPUTER It is used to open the
14. features e Format TXT or ASCI file e g Autovelox asc e Content Longitude Latitude Description optional field separators should be a comma e g 8 61577 38 97800 SR 515 speed limit 50 From Main Menu gt Settings gt Advanced gt Load Cameras select Add and close the directory where the files were saved each time it is possible to add more than one file O O LE st es Select Add and browse in the directory where you q saved the files E amp Select Load to view the files then click Import to let the application acquire them importing procedure may take a few minutes The procedure is completed when the message the importing procedure was completed successfully appears on the screen VDO GP7 is now ready to use imported POI Whenever you approach a POI during a calculated route and the acoustic alarm is ON see above you will hear a horn accompanied by a visual indicator on the lower right hand side of the screen see images WARNING Before importing the POI in the device especially concerning speed cameras please verify if the service is allowed in your country If not do not import the files and do not use the functions Any liability is disclaimed in case of a use against the law 53 CHOOSE PROFILE AT START UP It enables to choose to visualize or not the profile choice at device start up If this option is not active the navigator at the start
15. name stretches are not highlighted MyNav outdoor maps offer other contents to support orientation such as terrain shading and elevation contours the availability of contents depends on the map in use The terrain shading is a picture representation of the land background which gives additional information to get your own bearings It can be displayed or hidden on request See Settings gt Map Elements gt Layers In addition to terrain shading there are elevation contours by touching one of them MyNav displays an informative label with the relating altitude the elevation contours are reproduced at 20 metres or 100 metres according to the zoom scale Once they are selected hydrographic elements rivers brooks lakes give an informative label indicating the name and the typology of the element NOTE green labels refer to elevation contours and show the relating altitude orange labels are displayed for hydrographical elements and areas elevation contours and hydrographical elements have not associated further information 20 6 2 FIND DESTINATION Use Find Destination when searching for an element to be used as a route destination Par 4 e Find Address e Find Recent Destinations or Favourites e Find POI Point of Interest e Find Geo Notes e Find Coordinates e Last POI found e Find mountain paths e Find ski slopes e Find lifts Contents whose availability depends on the map in use Fin
16. open the GPS Status window In case of poor satellite reception after GPS connection map positioning will not be possible and a weak GPS signal message will be displayed GPS positioning reception and setting may take up to 15 minutes on first start up GPS fixing It is recommended to stay in the same place until the map position is displayed in VDO GP7 In case of interruptions of GPS signal due to natural obstacles or other reasons VDO GP7 will automatically resume the connection once the signal is available again FIND DESTINATION 4 SELECT A DESTINATION AND START NAVIGATION Once started the software displays automatically the Main Menu Par 6 select Find destination to choose your destination among POIs Addresses Coordinates Favourites Recents Last POI found etc Then simply select the point and touch Route to to start navigation Par 6 2 According to the map in use eg outdoor maps further destinations are available mountain paths ski slopes and lifts In this case it will be very easy to look for the element to see its position and define the precise point for arrival directly on the map Tap the point on the map and choose Route to among ACTIONS Par 6 2 To search an address please select Address and enter the City and in case Street name and number then start navigation towards them using Route to Par 6 2 VDO GP7 automatically starts assisted navigation to guide
17. the first letters which compose it e by proximity to City and or Address specify the City and in case Address to see nearby Geo Notes e by proximity to GPS position to see a list of the Geo Notes in a range of 50 km around GPS position e by proximity to destination to see a list of the Geo Notes in a range of 50 km from destination only if a route has been calculated NOTE to do the search it is necessary to select at least one Geo Notes category Find coordinates To look for a particular point on the map by entering the relevant map coordinates latitude Y and longitude X Select Find coordinates use Reference System to switch from the default format WGS84 to your favourite one for further information on the formats available please see Par 9 Use Favourite to store the point among Favourites Map to see it on the map Route to to use it as a waypoint in a route planning 29 Last POI found Last POI found allows to access a window containing the list of the POI provided by the system in the last searches This button enables to search a POI within the list resulting from the last search performed For multiple searches the last list is displayed Exiting the application the list is reset until a new search is performed Find Paths The procedure to be followed to search a path is the same one used to search a ski slope or a lift the only difference concerns the types o
18. the training When all the phases have been inserted press Start to begin the training session or Save to store it in the predefined folder To use a training previously stored use Load training At the end of the first phase the user can start the second one directly from map selecting Next phase Select Stop to interrupt the training VDO GP7 will ask to save the track All the saved tracks can be loaded using Training tracks in the relating menu All the saved tracks can be loaded Load to do the track race competition It will be amazing to compete against a track previously stored VDO GP7 will show the improvement worsening of the performance The present position is represented on the map by a green arrow the navigation one the position recorded in the previous track with a red spot The challenge is won when the arrow arrives at destination before the spot It displays the metres and the time gained lost with reference to the track 41 6 5 SETTINGS Use this menu to set MAP VIEW AND MENU navigation and map displaying options VIDEO CONTROLS customization of the indicators on map menu MAP ELEMENTS selection of the information to be seen on the map ROUTE PARAMETERS setting of navigation and route parameters SYSTEM OPTIONS system control adjustments volume brightness see charging ADVANCED PREFERENCES 6 5 1 Map Management MAP ROTATION
19. the relevant fields to specify Latitude Y and Longitude X of the point The central button shows the reference system to which coordinates refer and can be changed simply pressing the button Selecting the button Set coordinates it will be possible to select the Projection and the Map datum and if provided also the relating Zone see Par 9 Selecting Lat Lon on Projection Menu the chosen coordinates system will be set specifying besides the map datum and the Format for coordinates DDD MM SS SS Degrees Minutes seconds or DDD DDDDDDDDD Decimal Degrees or DDD MM MMMM Degrees Decimal minutes NOTE 1 itis not possible to search for a coordinate which is out of the map in VDO GP7 2 itis not possible to search a Cartesian coordinate which is out of the area in which the projection is allowed 65 TRIP COMPUTER Trip computer is a utility to monitor your trip performance it is always available on the display using the relating button 4 For VDO GP7 it manages and visualizes the data from ANT sensors speed cadence and HR to monitor performances while training The trip computer records and visualizes the information summarized in the following table STREET DATA ELEVATION DATA GPS DATA Odometer Gradient ascent descent Direction track direction Moving time Slope Descent to destination waypoint Speed Slope avg ascent descent Ascent to destination waypoint Speed Max Height current lap to
20. up will use tha last profile loaded For further information on profiles see Par 6 6 UNITS This menu permits to change the unit system in which MyNav will process and display the data The options available are Metric system m km Mile system ft Mi Yard system yd Mi RESTORE ORIGINAL SETTINGS To reset the device original settings use Restore original settings then select the reset type It is possible to have a partial reset which preserves the personal data quickly reinstalling the software or a complete one to delete all contents and restoring original settings In this latter case all the contents will be definitely lost 54 6 6 USER PROFILES VDO GP7 is intended as a multi task navigator many functionalities are available in the same device and with the same software and they can be variously combined and configured according to personal requirements In this context the user profiles represent the best combination of software functions settings for a specific usage Preferring one profile to another will guarantee time by time to have at hand the best software lay out and configuration according to the situation in which the device is used 6 6 1 Choosing the profile After the map selection the profile choice has to be done at every software start up The profiles available by default may vary according to the device in use eg for the device VDO GP7 there are further profiles connected t
21. users to destination with vocal and textual instructions Planning a route with GPS on the system assumes the GPS current location as starting point automatically with poor GPS reception the system takes the last valid GPS position found From Map Menu use the button Find Destination to select the point for arrival and start the navigation towards it quickly WARNING the characteristics and the features of navigation routing functions and moreover their availability may vary according to the map in use ENTER A TEXT 5 ENTER A TEXT To enter a text when required open the keyboard clicking on the text field The arrow enables to delete the text selected Use 1 2 3 button to open numbers keyboard To confirm select OK O gt lt WARNING To enter an address please remember not to specify accents apostrophes etc otherwise the software will not recognize the name entered Pay attention to how you write the name due to spelling mistakes the software may not match the name with the map Do not digit blank spaces while entering the name the name will not be recognised by the system NOTE Main Menu gt Settings gt System to choose QWERTY or ABC keyboard 10 6 MAIN MENU SOFTWARE FUNCTIONS 6 3 ROUTE PLANNING 6 4 MY MENU 6 1 MAP 6 2 FIND DESTINATION New Edit Delete Tours Pre load on track Favourites Saved routes Geo Notes Tracks Tri
22. you want to import It will be possible to include or not images and sounds with a simple flag near the relating icons Press Import to start the procedure If VDO GP7 finds that some of the points have been already stored it will ask if you wish to overwrite or update them Once the import has been completed time may vary according to memory card speed and to the number of points selected a report will be displayed e result status of import procedure e number of points processed e number of points imported e number of points overwritten or updated e number of not deleted points see type 2 in MyNav data structure Press Ok to quit Report to display the import summary In case some errors occur during the procedure it is highly recommended to visualize the report with the details of errors found by the system 36 Geo Notes import in Web format To import lists of points of interest organized in MyNav format select Memory Card gt My Geo Notes choose the file you want to import ascm and press Open Give a name to the category of points imported and combine a proper icon the one you want to be visualized with the point on the map Press Import if the category already exists MyNav will ask if you wish to overwrite or update it Remember that if you choose to overwrite the already stored Geo Notes will be deleted once and for all Once the import has been completed time may v
23. 06174231404112 23432145 66707 8ITESTIZd on bmpl speed wav WEB FORMAT File extension asc to describe a GPS point using Web format you have to build a data string using I as separator organized as follows WGS 84 LONGITUDE COORDINATES WGS 84 LATITUDE COORDINATES ELEMENT NAME An example of record description 15 89561 41 76151 My GeoNotes Geo Notes export in VDO GP7 format To export your Geo Notes in MyNav Format choose Export gt MyNav format then select the categories of the Geo Notes you want to export It will be possible or not to include images and sounds with a simple flag near the relating icons Press Export and choose the name for the export file without specifying the extension Once the export has been completed time may vary according to memory card speed and to the number of points involved a report will be displayed e result status of export procedure e number of points processed e number of points exported e number of not valid and so not exported points Press Ok to quit Report to see the export summary In the memory card Geo Notes Export folder MyNav will create a new folder with the name chosen for the export and if their export has been previously selected a folder Extra with photos and videos NOTE to see the content of the memory card during the export procedure it is necessary to use an USB connection and to have Microsoft Active Sync
24. CURRENT DIRECTION NORTH Map rotation ON gt the map is constantly oriented to the motion direction detected by the GPS device in scales up to 1 5 Km for higher scales the map is always oriented to North Map rotation OFF gt the map is always oriented to North Choose the favourite option and confirm with Save Settings AUTO ZOOMING ON OFF Enables disables automatic zooming during navigation according to speed and to the proximity of the following deviation Choose the favourite option and confirm with Save Settings NOTE in navigation mode the Auto Zooming ON button enables automatic zoom that is map viewing at optimised scales according to speed widening when a new deviation approaches When map function buttons are displayed the system presumes that the user is wishing to consult the map freely temporarily disabling the automatic zoom which keeps running in the background and is ready to resume as soon as function buttons are not displayed on the screen anymore MAP COLOURS DAY NIGHT CLASH AUTO It allows to choose a brighter darker or black and white visualization of the map to maintain information readability according to the outside light conditions The Auto mode automatically switch from Night to Day according to the time set on the device PANNING CONTINUOUS WITH STATIC MAP REFRESH To set continuous panning map dragging or static panning that is dragging with static map refresh
25. It will show the North giving a great support in orientation during excursions NOTE 1 The compass is influenced by magnetic sources to guarantee data reliability keep the device away from electronic devices which may create magnetic fields 2 If the compass is exposed to strong magnetic sources it will be necessary to calibrate it again To calibrate the compass rotate the device of 360 degrees both horizontally and vertically 3 To read the compass correctly mantain the device horizontal Pressure data usage MyNav besides enabling the immediate consultation of the barometric data uses this value to process and display information on the slope and it is moreover used to generate elevation graphs The calculation is done evaluating the differnce of pressure between two points which is strongly connected to the slope difference in height covered 99 9 COORDINATES 9 1 INTRODUCTION TO COORDINATES The coordinates systems used to define the position of a point on the Earth surface can be grouped into two classes geographic and cartesian systems Geographic systems Geographic systems represent a point using a geocentric ellipsoidic reference system In fact the Earth is shaped like a ball squashed on the poles and could be approximated to an ellipsoid a regular solid resulting by the rotation of an ellipse on its minor axis therefore the minor axis of the ellipsoid approximates the Earth axis The arcs of c
26. S system to measure the coordinates of a point has diffused the use of WGS 84 datum all over the world 61 Latitude and longitude expressed as angles can be represented in different formats which in VDO GP7 are DDD MM SS SS Degrees Minutes seconds DDD DDDDDDDDD Decimal Degrees DDD MM MMMM Degrees Decimal minutes Cartesian System The cartographic representation on a map requires to project the datum assumed as a reference for Earth on a plane surface The projection then transforms the geographical coordinates of a point into plan Cartesian coordinates Each projection implies a distortion transforming an ellipsoidal surface into a plane one Among the various transformations available the conformal transformations are quite used because they have the property to maintain the angles between the ellipsoid and the plane and so the shape for small areas On the other hand the conformal transformations distort the distances so that the distance between two points of the ellipsoid is different from the distance measured between the same two points projected on the plane Nevertheless it is possible to estimate the ellipsoid distance using formulas derived from ellipsoidic geometry or using the Euclideian distance on a plan corrected by an appropriate coefficient In VDO GP7 the distances are offset automatically To reduce the distortion effect the reference area is often subdivided into different projection zones In cartogr
27. Settings Map Elements Video controls Route Route info 29 _ 6 3 2 Edit a route Choose Edit to change the currently set route use the arrows to edit the waypoints order and calculate it again Select Save to store the route If there is not an already calculated route Edit opens the Saved Routes window 6 3 3 Delete a route Press Delete in the Route planning screen to delete a route from the map and exit the Assisted Navigation mode VDO GP7 will return to consultation mode 6 3 4 Tours Pre loaded on track Preloaded tours which are available according to the map in use are subdivided into e already set tours e tours on track The already set tours are very close to a route without navigation attributes they can be displayed on the map for reference during excursions Sometimes useful information is linked to the tours Info In some cases according to the map in use Tours on track may also be available Tours on track are very close to tracks they are supplied with the map and they are placed among Tours to keep them separated from the tracks recorded by the user My Menu They can be opened to do track simplified navigation RE With outdoor maps on board using Tours menu the user can load tours which may be stored in the memory card Already set routes are subdivided into four categories bike horse ski and trekking category av
28. Trip Computer window in particular use Layout to define the number and type of data and pages to be visaulized in theTrip Computer The number of elements chosen will be proposed in each page and the relating values can be easily customize with Configure A lot of data will be available tra cui Current Values Lap Totals Values and Map Here is an overview of the possible data available STREET DATA ELEVATION DATA GPS DATA Odometer Gradient ascent descent Direction track direction Moving time Slope Descent to destination waypoint Speed Slope avg ascent descent Ascent to destination waypoint Speed Max Height current lap total Distance to destination waypoint Speed Avg Speed ascent descent Time to destination waypoint Arrival time at destination waypoint OTHER FITNESS DATA Battery Cadence max avg Pulsations in on HR max Date Calories Connection time HR sensor Time HR max avg BIKE SENSOR SETTINGS VDO GP7 can be connected to ANT sensors HR Cadence Speed To pair a sensor use Sensor Pairing Choose the sensor which has to be paired and the bike with which it has to be used VDO GP7 can be paired with the sensors of two different bikes it is possibile to choose among Bike 1 and Bike 2 then wait for the device to recognise the sensor A messagge will inform that the pairing has been done successfully Dealing with HR monitor choose it from the list and wait for the device to recogn
29. Web format export generates an ASCII file asc the one in MyNav format a peculiar ascm file the GPX one the peculiar universal format the import from MyNav Web GPX format can be done successfully only using the previously indicated formats and a specified predefined structure for the files see box MYNAV FORMAT File extension ascm to describe a GPS point using MyNav format you have to build a data string using I as separator organized as follows ELEMENT TYPE consented values e if the record comes fom MyNav for ex copy paste of a MyNav export record e 1 if the record is created by hand standard e 2 to delete the record ELEMENT ID consented values between 0 and 2147483647 CATEGORY NAME max 31 characters CATEGORY ICON FILE NAME max 31 characters ELEMENT NAME max 31 characters DATA OF ENTERING yyyymmddhhmmssmmm format or O if it is automatically assigned by import procedure WGS 84 LONGITUDE COORDINATES WGS 84 LATITUDE COORDINATES ELEMENT HIGHT in metres consented negative values too except the minimum lower value 2147483648 wich means that the value is not available EXTRAS optional max 511characters notes max 200 characters followed by pipe image file name max 150 characters followed by pipe audio file name max 150 characters followed by pipe Fields are separated by I An example of record description 1l1179757533lEXTRAIICON bmplElement testl200703
30. a included Once a route has been calculated or when a track is loaded elevation data are available on the display The elevation information is based on elevation contours so they are not available when the map in use does not contain such data Elevation data can be represented as histograms simply touching Touching the graph it is possible to see speed available also for tracks slope value on the selected point distance from start point altitude map route on the map elevation profile Use the relating buttons to change zoom level by hand or use the cyclical control Best Fit to change the scale between abscissa and ordinate 5 scale levels preset e Best Fit to see the entire profile histograms e scale 1 1 e scale 1 2 e scale 1 5 e scale 1 10 To switch from a point in the histogram to a point on the map use Map The button available only for routes and not for tracks divides the display into two parts one for the map navigation and the other for the elevation profile during navigation the shifting of the position on the map is lined up to the position on the elevation histogram 58 COMPASS amp ALTIMETER Map Consultation MyNav on dedicated devices gives the possibility to use and visualize the compass and the altimeter value only on compatible devices The compass can be displayed on the map simply touching the relating icon in the upper side of the screen
31. ailability depends on the map in use For each pre set route detailed information may be displayed using Info difficulty level length time gradient etc the presence typology and charcteristics of the tours may vary depending on the map in use 30 6 4 MY MENU My Menu in the Main Menu enables to access the single menu to e Manage and visualize the Favourites e Manage saved routes e Manage tracks e View the logbook of the trip computer e Manage and set trainings 6 4 1 Favourites Every element searched or queried can be saved among Favourites use the specific key in the ACTION menu which appears touching an element on the map and select Add to favourites The data in the Favourites can be used as destination in quick navigation Navigate renamed or deleted Rename and Delete or viewed on the map Map 6 4 2 Saved Routes From My Menu it is possible to access Saved routes which contains the route stored by the user during route planning Select the favourite route to see it recalculated pressing Open It is also easy to rename and delete a saved route using the relating buttons Use Edit to change the parameters and the waypoints previously entered in the Route calculation window Name Data changes the order of the data on the output list to have a better view 31 6 4 3 Geo Notes The word Geo Note identifies information text s
32. ap After the choice of the language for the installation the program will ask if you are using a PDA palm top device or a dedicated device MyNav PND If you choose the wrong device an error window will appear and the program will ask you to reproduce the choice in a correct way 11 CHOOSING THE MAP If the data bank installation option is selected the following screen is displayed from where the Data Bank to be installed can be chosen FORMATTING MEMORY CARD only with Installation via Active Sync If at stage D Active Sync installation has been chosen formatting Memory Card flag will be available before installing the program Before formatting the memory card the system will ask once again to confirm the operation 72 INSTALLATION The system checks the hard disks present and the available space Moreover the space needed for the installation is reported After the program files copy the software will show a message to signal the successful end of the installation procedure In case of new maps installation on first start up and after installation completion a Registration code will be displayed requiring to insert the relevant Activation Code to be retrieved by choosing one of the following options e By connecting to the Software Activation section in www mynav com website After registering to the website providing your details you will be requested to insert the Product C
33. aphy the transverse Mercatore projection is often used that is a cylindrical conformal transformation which assumes a meridian as projection line In particular UTM Universal Trasverse Mercator adopts the transverse Mercatore projection subdividing the globe into 60 zones of six longitude degrees each projecting respect to the central meridian of each zone The count of the zones starts from the Greenwich antimeridian proceeding to East Because the projection diverges to infinity at the poles it is limited between the 84 North latitude and 80 South latitude 62 The UTM provides also the division in parallel areas marked by an alphabetical letter Each area has an extension of 8 degrees latitude except for the Northern band which extends for 12 degrees C 80 72 D 72 64 E 64 56 F 56 48 G 48 40 H 40 32 J 32 24 K 24 16 L 16 8 M 8 0 N 0 8 P 8 16 Q 16 24 R 24 32 S 32 40 T 40 48 U 48 56 V 56 64 W 64 72 X 72 84 Each State for historical and geographical reasons has chosen its own projection adopting specific parameters and applying it to a peculiar datum In VDO GP7 the projections which are specific of an area are allowed only for points belonging to that area Here are the supported projections For each projection it is specified the datum which can be applied the zones provided and the country which uses it Projection Datum Zones Note LatLong All Not con
34. ary according to memory card speed and to the number of points selected a report will be displayed e result status of import procedure e number of points processed e number of points imported e number of not valid and so not imported points Press Ok to quit Report to display the import summary In case some errors occur during the procedure it is highly recommended to visualize the relating report with the details of errors found by the system Geo Notes import export in GPX format To import Geo Notes in GPX format from the memory card Storage Card gt My GeoNotes choose the file to be imported GPX and confirm with Open For further details on Geo Notes import in GPX format see above Geo Notes import in VDO GP7 and Web Format To export Geo Notes in GPX format choose the categories to be exported and confirm selecting Export For further details on Geo Notes export in GPX format see above Geo Notes export in MyNav and Web Format 37 6 4 4 Tracks Track recording With the GPS ON this function allows to record the current route by points and view it on the map highlighting the travelling direction To activate this function press PLAY and define the name of the track you are about to record The program will ask if to continue a track recorded before or to start a new one On the map on the top left hand side near the satellite reception indicator the REC indicator d
35. ascent to waypoint PAGE 3 4 Distance to destination Time to destination Elevation gain ascent to destination Height max Speed avg Slope avg ascent HR avg speed max Cadence avg Calories Speed Odometer Moving time Speed avg Elevation gain ascent HR Cadence Odometer Moving time Elevation gain ascent descent Height max Calories Height HR Odometer Elevation gain ascent Speed avg 68 MAP INSTALLATION amp RECOVERY PROCEDURE The following procedure which describes MyNav installation can be followed both to restore memory card data content in case of unwanted data loss do updates or add new maps Warning The recovery DVD has to be used only under support directions The installation programme starts automatically when the CD is inserted The following screen is displayed NOTE MyNav Setup requires Microsoft NET Framework vers 2 0 During this stage the presence of NET Framework is checked If the system detects that it is missing it proceeds to install it In this case the screen will be displayed for a few minutes After the installation MyNav exe is run If Microsoft NET Framework vers 2 0 is not installed correctly for any reason it may be installed manually by running the dotnetfx exe programme included in the Utils folder in the MyNav Setup CD LANGUAGE SELECTION The installation programme requires that ActiveSync 3 7 or higher is installed If i
36. ates and the direction indicators are displayed in localization map consultation GPS positioning in Consultation with GPS off their values will not be available 15 Quick Map Menu shortcuts to quick access from map to all software functions Select to show hide quick map menu In Consultation the following function buttons are available Trip computer to record many trip information as current mean max speed lap total time gradient slope etc Par 10 Audio display battery give access to main system adjustments Show POI on the map to select the categories of POI to be displayed on the map Find destination to plan a route and start assisted navigation Par 4 Main Menu par 6 NOTE by the Zoom Scale function displayed on Scale you can access the map representation directly with the desired definition max and min and enlargement as well as two intermediate levels Window zoom unlike the zoom in and zoom out it widens the map portion included in a rectangular window determined by dragging and dropping on the screen allowing a free scale zoom Q Home address to navigate with a single click from the current GPS position up to a specific point In order to set or edit your favourite address see Par 6 5 6 NOTE Window Zoom and Home Address buttons may be changed according to user s preferences respectively in Centre Map and
37. cre oro hern i ER DEDI eri EE 47 O OV SIEM oos ennt pa A TOU VEO EUER COCOA OCT DE uate asta OS 48 6 5 6 Advanced settings 49 60 Usor FIOMES Lunnan R ar m Rd Pao Rata unn 55 6 6 1 Choose a profile choice 55 60 2 Personal AN sa 55 6 6 3 Profile customization r rrrrrnnrrrnnnvvrnnnvrernnnrrrnnnvrnnrnvrennssressrsvvessnnvesssnvene 56 6 6 4 Active profile reStoring ccccccscccsscesseecssecesseessseeeseeseseessseeeeseeessaeeess 56 6 6 5 Default Profiles reiner 56 ASC rr 58 8 Compass and barometer sssseenemnn 59 S COORONG NNN 60 9 1 Introduction to coordinates rassar 60 9 2 Coordinates map VIew eene 64 9 3 Search destination coordinates 65 10 Trip GC MD UL ror Seo n ea aes e o ln e hon e e ha 66 11 Map installation software recovery eenm 69 12 Interpreting the map ssseennnmn nnn 75 INSERIRE 15 AS LA M M oT M M 15 12 9 otatidar d Outdoor POL 0 snar 76 IMPORTANT WARNINGS _____ 1 IMPORTANT WARNINGS O MyNav or VDO GP7 navigators are precharged with software and maps they are stored in the SD Card which is already activated Insert the SD Card in the navigator and start it To install new maps see Par 12 WARNING this user s guide is organized to cover all the situations of use and all MyNav and VDO GP7 configurations For further information on the navi
38. d Address Press the Address to view a window where you can specify the City Address and Street Number not compulsory to be searched Touch the text fields to view the keyboard and enter the names numbers Once you have entered all data press Map to view them on the map Favourites to add an address to the Favourites Route to to use the address in a route calculation In case no address is entered the town centre of the selected City will be displayed NOTE when entering text elements do not use special characters accents apostrophes etc Find favorites and recent destinations In order to search among Favourites and Recent Destinations touch the relevant icon and select one of the available items and then Route to to start navigation otherwise to view the selected item on the map click Map Each searched or queried point can be added to Favourites and Recent Destinations or can be saved among Favourites 21 FIND POI Points of interest SELECT GROUP SELECT CATEGORY SEARCH TYPE POI search after selection of reference categories can be performed following different criteria choosing Search e by name and or City e by proximity to City and or Address e by proximity to GPS position e by proximity to destination when a route is calculated By City and or Name Specify the POI and or City you wish to search in the relevant fields with the keyboard displayed touching the text field
39. ding Indicator C Next Turn Direction D E Zoom amp OUTDOOR VERSIONS to see Elevations Par 7 Quick map menu 1 Trip Computer 2 Audio Display Battery 3 Show POI on the map 4 Find Destination 5 Main Menu 6 Show Hide Map Menu 7 Window Zoom 8 Home Address 9 2D 3D View 11 Skip waypoint Fig 1 MyNav Fig 2 Click on 6 in Fig 3 View also navigation Fig 1 to see the bar travelling time the with the map menu indicating the distance to the open current road name closest stage point and expected time for arrival The navigation functionalities may vary in performance and availalbility according to the map in use NOTE 1 The user can choose the route information to be displayed from Settings gt Video Controls gt Indicators Par 6 5 2 2 Altitude is indicated only when satellite reception levels are excellent Satellite reception may be sufficient to perform a location and not to detect height 3 Press the button D next waypoint direction to switch from the graphic mode to the numerical one the value is expressed in degrees respect to the north provided by GPS In outdoor versions the elevation button will be available on map menu 4 The expected time of arrival Fig 3 is calculated according to the time set on the device 5 For outdoor versions the button 10 a button which allows to calculate route elevation profiles is also available 28
40. done using elevation contours consequently if the contour lines are not available on the map in use the histograms will not be displayed Par 7 NOTE use elevation profiles function only with maps which include elevation contours otherwise the following message will be displayed Data not available We recommend to use this function with suitable MyNav maps 18 Map elements and queries Each element shown on the map lines and areas can be queried by touching it both in 2D and 3D view Click on the icon to open the ACTIONS see images which contain the Type and the Name of the selected element plus functions button to use it NOTE if you prefer to use extended Action Menu see Settings gt Advanced By touching the cartographic item on the map VDO GP7 will display a label with some ACTION items see figure above grouped in a menu There are different coloured labels depending on the element typology e Roads containing the street name as well as the related street number and City When the label appears the whole relevant road stretch is displayed in green stretches with no name are not highlighted e Unknown roads no details are available for these roads the elements are highlighted with a black arrow e Points of interest POI category and name e Areas name and coordinates of the point of the area selected With reference to the specific map in use e g outdoor maps other categories
41. ediate points can be e entered as addresses specifying the relevant City or entering the street name and number with the keyboard displayed touching the text field e selected among Favourites or Recent destinations e selected among POI e determined directly on the map define on the map the point corresponding to the desired element select it and touch the flag on the ACTIONS then specify if it should be considered as a starting point or a stage for the route e selected among Geo Notes previously stored by the user e entered specifying the relevant coordinates longitude and latitude or using the GPS Current position coordinates With outdoor maps on board the waypoints may be also selected among mountain paths skis slopes and lifts once the relating stretch is highlighted on the map choose the point to be added as a waypoint Planning a route you can insert more waypoints and they will be chronologically highlighted on the map following the order of inclusion in order to enable a better view To delete any undesired point from the list select it and touch Delete waypoint You can edit the order of displayed points using the arrows Once you finish entering the route legs press the Calculate button to process the route according to the selected parameters In order to save the route in the Favourite folder press Save to delete it press Delete NOTE 1 To calculate the route VDO GP7 wi
42. er if included the user can export tracks to the PC to view and modify them To see further information on MyNav Map Manager read its user guide or visit MyNav website 6 4 5 Trip Computer Logbook Track recording VDO GP7 can store the data recorded when using the trip computer My Menu gt Trip History The Logbook enables to store the trip computer data actual and lap values in single files The archive files are automatically created at every Reset in the Actual values and Current values windows in the trip computer Each Reset for the Totals will automatically generate a new file which can be viewed in the Total archive 6 4 6 Training In the VDO GP7 devices Training features are available in a section of the software completely dedicated to exercise planning and virtual competitions based on tracks There are two types of training Free training and Track race Free Training Selecting a Free training the user can set a series of exercises to increase its perfermances In particular using the button Set training the exercise planning can be done easily fixing the goals to be achieved e HR threshold bmp target e Calories consumption target e Time time minimun target e Distance distance km target 40 Every time an exercise is confirmed it is automatically added to a list where also other excercises can be added Add phase in this way each exercise can become a phase of
43. f elements which can be searched Select path type easy medium difficult path path equipped with fixed ladders and cables mountain bike path Find ski slopes and lifts Use the buttons Ski Slopes and Lifts to open the window to set the parameters for the search name city and Ski Slope type green blue red black cross country or Lift type ski lift chair lift cableway and ropeway Editing the name of the slope or of the lift without specifying the city and the type VDO GP7 will elaborate the list of all the elements that may refer to the query the availability of the search type depends on the map in use 24 6 3 ROUTE PLANNING The Route Planning button in the Main Menu enables to e Create anew route adding one or more waypoints and selecting the route calculation type Manage the route just created edit waypoints and route calculation type save or delete route etc e Use visualize tours if available pre loaded on tracks NOTE tours are pre loaded are not present in street configurations 6 3 1 Create a new route 1 CHOOSE THE FIRST 2 ADD OTHER 3 CHANGE THE TYPE 4 CHANGE WAYPOINTS WAYPOINT WAYPOINTS OF ROUTE ORDER SET BY DEFAULT START CALCULATION Select Main Menu Route Planning New and choose the first route waypoint among Addresses Favourites Recent destinations POI Map elements etc Click on the bar with the default route calculatio
44. g to users preferences To change the coordinates system select Settings from Main Menu and then Advanced then choose Coordinates System and act on Projection and Datum buttons to set the favourite format Selecting Lat Lon in Projection Menu the chosen coordinates system will be set as geographical and so it will be possible to specify besides the Datum also the Format for the latitude and longitude DDD MM SS SS Degrees Minutes seconds or DDD DDDDDDDDD Decimal Degrees or DDD MM MMMM Degrees Decimal minutes Map coordinates view customization The coordinate system set will be used in the informative labels displayed and also in in the following screens Coordinates view in map Coordinates view in GPS Coordinates view in Geo Notes NOTE the zones of the projections are automatically calculated from the point position 64 9 3 SEARCH DESTINATION COORDINATES Enter Latitude Value Enter Longitude Value Set Coordinates SETTING COORDINATES SYSTEM As mentioned in Par 6 2 VDO GP7 offers the possibility to search a point by coordinates a point can be searched entering the relating coordinates specifying its reference system To enter the coordinates of a point as a destination select Search Destination from Main Menu Par 6 and then choose Coordinates Once the search by coordinates has been selected the following screen will be displayed use
45. gator functioning and on its correct installation see the hardware device included in the box In case of loss of memory card data please follow the recovery procedure explained at Par 12 Using the recovery DVD in the box only under directions of the support Any liability is disclaimed in case of data loss Please read carefully EULA End User Licence Agreement which is contained in paper format in the box and available at software installation and start up NOTE the images contained in this user s guide are for reference only and may vary they are all presented in portrait mode but they could have also a different orientation landscape depending on the device in use and users preferences User s guide paper version included in the box in some cases could refer to a previous software version For the last version of the guide please see the user s guide in the installation DVD START UP 2 START UP To start VDO GP7 please touch the relating icon on the display Each time you start the software you will be asked to accept the conditions of use If more maps are installed on the same memory card select the map you intend to use in the drop down menu before confirming through I Agree The software is preset to read all the different MyNav maps street outdoor and tourist maps If you install another MyNav map it will be visualized with others at software start up The software functions which are available
46. ike and will not ask again which bike has to be used To have an overview of all the connections select Status DATA RECORDING The button Data recording permits to enter the configuration menu Track recording interval and Sensor data frequency Track recording interval The track recording interval represents the frequency used by the GPS to store the points of the track during the recording The options avaialble are Low Average and High the value set by default is high The possibility to change the recording interval is useful to generate lighter tracks or when creating tracks to be exported to GPS device with restrictions on the number of track points DATA RECORDING INTERVAL For the recording of sensor data spped cadence pulse altitude the data recording interval can be selected The interval are 5 10 20 30 seconds 51 ALTIMETER The data from the barometric altimeter are used in the slope calculation for the height the VAM and many other values It is very important to calibrate it before every hike to guarantee the accuracy of the data processed by the navigator With Calibration it is easy to do a manual calibration entering a well known height or taking the initial GPS height as a reference using Current GPS height If you do not want to use the barometric information in the data processing select Use always GPS height For the altimeter a fil
47. ircumference defined by the intersection of a plane passing through the minor axis of the ellipsoid and the ellipsoid surface bounded by the poles are called meridians The meridian which passes trough the Greenwich astronomical observatory near London is the reference meridian to put it better the meridian zero The circumferences defined by the intersection of a plane perpendicular to the minor axis and the ellipsoid surface are called parallels The maximum parallel that is the circumference defined by a plane passing trough the major axis and perpendicular to the minor axis which contains the major axis is called Equator The equator is the reference parallel to put it better the parallel zero Latitude is the angle between a parallel and the equatorial plane measured from the centre of the ellipsoid Longitude is the angle between a meridian and the Greenwich one measured on any plane parallel to the equatorial plane Latitude and longitude univocally define the position of a point on the ellipsoid There are many ellipsoids which are different in size A coordinates system is properly defined not only by the ellipsoid type but also by its orientation Typically the ellipsoid is orientated in such a way to overlap a point on the ellipsoid to a specific point of the Earth surface interested by the geographical representation anchor point A datum is an oriented ellipsoid 60 To quote an example the datum ED50 which is a Euro
48. irport Rest Area ai Restarea 8 Trainstation i Industrial zone 8 Library i Museum E Pharmacy Policestation v Post Office 6 Provincial Council st School Leisure Business X Amusementpark dc Bowlingcentre z cases Skipass m Casino uri Castles Ruins ai Cinema Cols 5 Fountain Golfcourse Historicalmonument A Iceskatingrink EN Infrastructures for horses 2 Marina Atm Bank Bookstore Businessfacility T1 A Mountain tops tn Naturalistic attraction Nightlife fr Panoramic Points 2 Park Recreationarea Performingarts School Ski Sportscentre Sportscomplex ft Touristattraction Touristinformation Waterfalls Caves Jeweller s 7 Shopping Tobacconist s NOTE 78
49. ise it For the speed sensor it is necessary to set the wheel circumference before the pairing from the relating menu in Set speed sensor To determine wheel circumference fix a reference point on the wheel for example on the blowing valve place a sign on the ground make the bike go ahead till a complete wheel lap is done then place another sign on the ground The distance between the two signs is the measure of the wheel circumference Once the circumference is determined and after installing the sensor on the bike constantly move the wheel around for all the time necessary for the pairing For the cadence sensor it is necessary to move the pedal A messagge will inform that the pairing has been done successfully 50 From the Set Speed sensor menu it is possible to set the way with which the device will show the speed data If the sensor is not connected the GPS data can be displayed With the Connection key the user can decide to pair the sensors automatically or manually VDO GP7 can manage more profiles Bike 1 and Bike 2 to be used on two different bikes If both bikes have a speed sensor installed do as follows for a correct use of the navigator For the first bike activate Bike 1 using the Active bike button and do the pairing of the relating sensor then for the other bike activate Bike 2 and do the pairing in the same way MyNav will save the sensor connection set for each b
50. isplayed only if enabled Settings gt Video Controls gt Indicators will turn to red indicating that the recording is active To stop the recording press STOP Track displaying on the map To view saved tracks go to My Menu gt Tracks gt Saved Tracks and select the desired file touch Open to load the track The track can be opened on the map or it is possible to start track simplified navigation direct navigation or track back In consultation mode VDO GP7 displays the track on the map also reporting the relevant info data including elevations and speed hystograms Once the track is opened use the button Route info to see the details track name distance start end date min avg max speed etc ACTIONS MENU will be available for each point of the track Show profile show the position of the point selected on the elevation profile Info visualize the relevant information of the selected point Route to start navigation towards the point Starting point waypoint add the point as a waypoint in a route calculation Add to Favourites add the point to Favourites 38 Track Elevation and Speed Profiles In the track report window use the buttons Elevation and Speed to see the relating histograms Using the relating button it is possible to switch from Elevation to Speed profile Track Navigation With VDO GP7 a track can be navigated in a direct way or doing the track bac
51. k The GPS location will be highlighted over the track recorded and VDO GP7 will warn the user every time the position recorded by the GPS is outside the track indicating the right direction and the distance to reach the track again GPS Position Delete a track To delete track from the map press Delete in Track Menu to rename the track press Rename The Geo Notes stored during track recording are linked to the track so when you load the track you can see also all the Geo Notes associated These points can be managed searched and used in a route calculation as any other standard POI It is possible to change the order of the tracks stored in the menu according to the Name or the Date for an easier consultation NOTE a track recording can be start simply by clicking the REC icon in the Indicator panel 39 Track conversion Tracks are recorded in MyNav TRC format and they can be converted into the most common GPX format to ensure compatibility also with other devices Use convert to GPX to change track format To import a track into the device connect it to your PC using USB cable and place the track file into the Storage Card gt MyNav gt DB in use ex storage card MyNav MyNav_DB TRC NOTE 1 With a TRC track selected the button Convert to GPX will be available on the contrary with a GPX track selected the button Convert to TRC will be displayed 2 Using the PC software MyNav Map Manag
52. licking on the relating icon on the display while navigating it is possible to search POI Geo Notes A search by proximity to GPS position will be performed showing the list of POI Geo Notes found Each POI Geo Notes resulting from the quick search can be archived as a Favourites or used in aroute calculation as a stage or as the destination or visualized on the map simply clicking on the relating button Ei 44 SKIP WAYPOINT ON OFF In navigation mode it enables disables the visualization of the Skip Waypoint icon on the map for further information see route planning section in this guide Confirm with Save Settings BUTTONS WITH DOUBLE FUNCTION ALLOCATION To allocate a different function to the button Window Zoom and Home Address proposed by default in the map quick menu JS JL e BUTTON 1 FUNCTION window zoom or ruler e BUTTON 2 FUNCTION home address a or center map Confirm with Save Settings 6 5 3 Map elements Using this menu it is possible to customize map view according to personal preferences enabling or disabling relevant levels It is moreover possible to choose which POI categories to be visualized on the map for consultation LAYERS choose the informative levels to be displayed on the map e terrain shading bike e main roads green areas woods parks ski slopes e el countours local roads X urban
53. ll always select the street type chosen by the user for example easy paths instead of difficult ones etc using a lower level of difficulty than the one requested only when there are no reasonable alternatives otherwise MyNav will avoid lighter difficulty levels for example choosing easy paths MyNav will use easy paths and streets in the route calculation only if there are no paths available it will always leave difficult paths out Choosing Free calculation mode VDO GP7 will use all the elements available on the map 2 If the starting point and the destination are not directly connectable or anyway not using element in accordance with the type of route calculation selected VDO GP7 will search in a range of 1 km from the selected point the nearest element with those characteristics 3 If while you are setting the parameters for a route calculation the GPS signal is weak a warning message will appear specifying that the route will be automatically calculated when a good reception will be available When the reception is restored a notice window will be displayed to start up the navigation on the route previously set 4 From Settings gt Route gt Default type it is possible to set the software to ask every time which type of route calculation is preferred or to choose a type to be used by default in all route calculations 2 Assisted Navigation Indicators panel A Satellite Reception Indicator B Track Recor
54. may be available e Mountain paths name type and difficulty level of the selected stretch e Ski slopes name and difficulty level of the selected slope e Lifts type and name of the selected lift ACTIONS MENU contains a lot of useful functions to manage the point CLOSE closes the ACTION window INFO visualizes where available more details about the selected element SHOW ON PROFILE selected a point in a calculated route show this one on the altimetric profile ROUTE TO starts quick navigation from the GPS position to the selected point WAYPOINT uses the selected element as a waypoint for route calculation ADD TO FAVOURITES store the point among Favourites NEARBY POI finds points of interest near the selected element GEO NOTE stores the point as a Geo Note When an element has more than one attribute e g a path which is also a part of a bike route you can use the arrows positioned at the top of the window to see more information about the different uses of the selected element NOTE 1 Label colours red labels highlight the presence of more information for the selected item Touch info from the informative menu to see a label with the additional information Blue labels are usually associated to no name stretches and to roads and indicate that no further detail is available Orange labels are for areas and hydrography 2 When selected on the map roads are highlighted in green No
55. n mean type e g Car fast to see the list of the consented options e Car fast toll free or not prefer highway e Bike Avoid unpaved roads or not or not consider unpaved road or not gt consider country roads or not prefer fastest route in hours e Pedestrian e Car short toll free or not prefer highway or Straight line route not consider unpaved road or not consider Basic routing country roads or not gt shortest route in km 25 With outdoor maps on board other searches may be avaialble Easy paths with or without lifts country roads Difficult paths with or without lifts country roads Paths equipped with fix scales and ladders with or without lifts country roads Ski Mountain bike with paths with or without lifts consider country roads or not Free use with preference roads and lifts For each option it is possible to enable disable further parameters with a tick toll or toll free using highways unpaved roads lifts or not If selected the route calculation will be done avoiding or otherwise keeping such elements into consideration NOTE the route types available may vary according to the map in use Please remember that in the same way the navigation functions and assisted navigation may vary in performaces and availability depending on the map in use 26 By touching Add Waypoint you can choose how to select the waypoints for the route Starting and interm
56. o the use on the bike with sensors The choice of the profile at every start up can be disabled from Settings gt Advanced gt Select profile at start selecting Start with the last profile selected Doing this the device will automatically load the profile settings connected with the last profile used and will not ask anything at start up 6 6 2 Personal data In VDO GP7 navigators in the Profiles menu the Personal data area where the user can be found where the user can set Name Sex Age Weight and Max HR pulse The maximum HR frequency can be determined using an automatic calculation based on the data below or inserted by the user The data entered combined with the ones derived form the HR monitor will be subsequently processed by a special algorithm used for the calories calculation The HR frequency is a very important data for training so ask your physician before starting a training Any liability is disclaimed 55 6 6 3 Profile customization Starting from the defaults it is quite simple to create new profiles customizing the content according to needs To create a new profile Main menu gt Profiles gt Profiles management select one profile from the list eg outdoor and click on Create copy This way the profile selected is copied maintaining the same settings of the original profile and it can be used as a model to start customization
57. ode you will find on the back of the User s Guide as well as the Registration Code displayed on software start up e By sending an email message to support mynav it including the Product Code you will find on the back of the User s Guide as well as the Registration Code displayed on software start up Insert the Activation Code in the special field provided by retrieving the palm device keyboard through the button on the lower right hand side the activation will be completed by confirming with the Next button If you still have not obtained an Activation Code or want to complete your registration procedure in a later moment select the Exit button Once you complete the registration procedure MyNav will be ready for use 73 O WARNING TROUBLE SHOOTING ce e The DVD is not launched automatically when it is inserted Solution MyNav Setup may be launched manually by double clicking MyNav hta e Microsoft NET Framework is not installed automatically Solution install it manually by running the dotnetfx exe programme stored in the Utils folder in the MyNav Setup DVD e Unable to format the Storage Card Solution copy the FormatSC exe file stored in the Utils folder of the MyNav Setup DVD into the Temp folder of the palm top device Create the SC txt file in the Temp folder of the device Write the name of the Storage Card inside SC txt Run
58. onfigurations l 008 User Profiles Enables to manage User Profiles in detail it permits to create a new one to delete or load a previously saved one Par 6 6 Exit the application i VDO GP7 Exit the application NOTE 1 POI means Point of Interest which is an already known point on the map 2 In lower Main Menu levels use the function button Back to return to the previously visualized screen 6 1 MAP Indicator panel UD Elevations when a route has been calculated io Route info when a route has been calculated Map Quick Menu Map quick menu contains 1 Trip computer 2 Audio Display Battery 3 Show POI on the map 4 Find destination 5 Main Menu 6 Show Hide Map Menu 7 Window Zoom 8 Home Address 9 2D 3D View 10 Route info 11 Elevations Profiles 12 13 Zoom e On first start up the indicator panel is completely disabled for street versions and on the contrary completely enabled for the outdoor ones It can be customized according to personal preferences from Settings gt Video controls gt Indicators Par 6 5 2 In the indicator panel it is possible to display and see A Satellite reception indicator E Next waypoint direction North of the map B Track recording indicator F Scale C D Trip Computer data The visualization of the Trip Computer data may vary according to the profile in use NOTE altitude coordin
59. only for outdoor versions will be highlighted separately in this user s guide with the already installed versions if they are not compatible please update nt the prior version before starting installation WARNING C2 when installing new MyNav products releases please verify their compatibility In order to change the map Main menu Settings Map Management Map and choose the map to load After accepting MyNav EULA conditions and choosing a map it will be necessary to choose a user profile between the ones by default eg outdoor bike ecc For further information on user profiles please see Par 6 6 NOTE you can install more MyNav maps in the same memory card verifying before cards capacity 7 3 GPS SIGNAL RECEPTION ______ 3 GPS SIGNAL RECEPTION VDO GP7 is ready to be use andthe integrated GPS receiver does notrequire any configuration once started the devices are already set to be automatically connected with GPS In any case it is possible to start the GPS by hand simply selecting ON in GPS STATUS window Settings gt System gt GPS After GPS connection VDO GP7 will show the position on the map by a green arrow which will turn to red when the signal quality gets weaker On the top left side of the map a 1 4 range of levels is displayed near the GPS symbol indicating the reception level These 4 levels indicate the maximum reception Touch the satellite reception indicator on the map to
60. ounds photos etc with a defined position geographical coordinates The Geo Notes recording is a function of VDO GP7 which allows to store points by coordinates and to match useful information From Geo Notes Menu you can e Create new Geo Notes e Load Geo Notes and see them on the map e Organize Geo Notes in categories e Import Export Geo Notes Add Geo Notes A Geo Note can be added e CREATE NEW with GPS ON the menu enables to store a Geo Note in the current GPS position automatically A management window with the coordinates of the current GPS position will be displayed enter the name of the point and in case an image or an audio file and select the relevant category compulsory finally choose Ok to store the point If necessary coordinates values and also altitude can be changed by hand e MAP TAPPING you can store a Geo Note firmly touching a point on the map and select Geo Note in the ACTIONS MENU which will be displayed on the map The program automatically links the point selected on the map to its coordinates Choose the reference category and the name for the point The point can be easily named clicking on Name and editing the text using the keyboard A Geo Note can be stored by tapping in any point of the map no matter if a link e g street path etc is available 32 Adding texts audio photos Image allows to choose a picture stored in the memory
61. p history Training Trip Computer Audio Display Battery View POI on the map Find destination Main Menu Window zoom ruler Home destination center map 2D 3D View Address Favourites Recent destinations POI Points of interest Geo Notes Coordinates Paths lifts slopes outdoor maps Last POI Found New See on the map Search Manage Import Export Saved tracks Delete on map Start recording Logbook Total Free Track race 6 5 SETTINGS Map management Video Controls Map elements Route System Advanced 6 6 PROFILES Rotation Current direction Fixed to North Auto Zooming According to speed Disabled Color Day Night Clash Auto Panning Continuous with static map refresh Map Select type ACTIONS menu Reduced Wide Orientation indicator North map compass Indicators Route info POI Quick Search Category Skip waypoint Show hide Button 1 functions Window zoom Ruler Button 2 functions Home address center map Show hide layers Hidden layers info On Off Show hide rasters POI Points of interests Key Automatic recalculation Auto ask before Speed camera alerts On Off Find destination All address only Deafult route type Ask always Type Home address Roundabouts view 2D current view Route planning type Map Menu Audio Display Battery Clock setting GPS Status Keyboard QWERTY ABC
62. pe is preferred ROUNDABOUTS VIEW ALWAYS 2D CURRENT VIEW It enables disables the option to see roundabouts always in 2D also in 3D view or always with the current view settings Choose your favourite option and confirm with Save Settings 47 PLANNING MODE USING MENU ON THE MAP There are two possible ways to plan a route for Planning using menu see par 6 3 with Planning on the map it is possible to calculate and display the route waypoint after waypoint directly on the map The route will be suddenly calculated and at the same time represented on the map Choose the favourite planning mode and save your preferences The new planning mode will be maintained for all the new routes planning till next preference change 6 5 5 System AUDIO DISPLAY BATTERY This menu enables to set important system regulations e volume adjustments e display brightness e display adjustments and orientation e energy saving settings The System Configuration menu is also used to see the battery charge level green bars and percentage of charge When charging the device the battery status bar turns to orange to indicate that the process is in progress To increase decrease display brightness and device volume use the relating buttons CLOCK SETTINGS Use the arrows to arrange time zone data and time Clock automatically updated at every GPS fix NOTE in VDO GP7 navigators the clock is reset when the
63. pean reference system uses the international ellipsoid orientated to Potsdam since Potsdam is approximately the centre of Europe while the datum Roma40 which is an Italian reference system uses the international ellipsoid as well but orientated to Rome The geographical coordinates of a point that is latitude and longitude are consequently always referred to a specific datum Datum Ellipsoyd Anchor point Geographical area WGS84 WGS84 DJ GPS reference system ETRS89 GRS80 European Official reference system fundamen tally similar to WGS84 ED50 International Germany Potsdam Old European reference datum for 1924 Helmert Tower UTM projection Roma40 International Italy Roma M Mario Italian reference datum 1924 CH1903 Bessel 1841 Switzerland Bern old Old Swiss reference datum Observatory CH1903 Bessel 1841 Switzerland Zimmerwald Swiss reference Datum Observatory MG Bessel 1841 Austria Hermannskogel Austria reference Datum Habsburgwarte SI D48 Bessel 1841 Austria Hermannskogel Slovenia reference Datum Habsburgwarte DHDN Bessel 1841 Germany Rauenberg Germany reference Datum DE42 83 Russia Pulkowo East Germany reference datum 1940 RT90 Bessel 1841 Doo Old Sweeden reference datum SWEREF99 GRS80 Sweden reference datum The GPS uses the WGS 84 datum as reference model for the Earth that is the WGS84 not oriented ellipsoid with its minor axis overlapped to the Earth one The easiness of using GP
64. sidered None projection The values are expressed value in geographical coordinates UTM All From 1 to 60 Le zone si estendono per 6 gradi di longitudine Partono dal meridiano a 180 e procedono verso Est Si applica in tutto il globo Italy GaussBoaga East West zone Si applica solo in Italia Switerland LV03 CH1903 One zone Applied in Switzerland it is the old projection now Switerland LV05 a a used Switerland LVOS LV05 CH1903 Applied in Switzerland in Switzerland Austria M28 M31 M34 Zones extend for 3 longitude degrees Applied in Austria Austria_GK West Central Zones extend for 3 longitude degrees Est J in Austria Slovenia D48TM D48TM SI D48 Applied in Slovenia in Slovenia Germany GaussKruger DHDN 2 3 4 5 Zones extend for 3 degrees of longitude Applied in Germany Germany Pullkovo DE42 83 2 3 4 5 Zones extend for 3 degrees of longitude Applied in Germany Sweden_RT9025GonV RT90 2 5 Gon V Applied in Sweden it is the old projection now the Fr is used Sweden_Sweref99TM Sweref99TM SWEREF99 Applied in Sweden in Sweden 63 9 2 COORDINATES MAP VIEW When an item on the map is selected VDO GP7 returns an informative label with the name and the place in which the element is located If there are no information associated to the point its coordinates will be displayed in the label These coordinates can be seen in different reference systems accordin
65. stination Speed avg Speed Odometer Moving time Speed avg Speed max Odometer Moving time Elevation gain ascent Height max OUTDOOR PROFILE CURRENT VALUES PAGE 1 3 Odometer Moving time Height Distance to destination Time to destination Speed avg CURRENT VALUES PAGE 2 3 Speed Distance to track Distance to waypoint Distance to destiantion Time and direction to track Elevation gain ascent to waypoint destination CURRENT VALUES PAGE 3 3 Speed Height Height max Slope avg ascent Coordinates Pressure Speed max Slope avg descent Speed Odometer Moving time Speed avg Elevation gain ascent Odometer Moving time Elevation gain ascent descent Height max Height Battery level Odometer Elevation gain ascent speed avg BIKE PROFILE CURRENT VALUES PAGE 1 3 Speed Odometer Speed avg Slope Moving time Height Elevation gain ascent CURRENT VALUES PAGE 2 3 Speed Elevation gain ascent to waypoint Distance to waypoint Time to waypoint Elevation gain ascent to destination Distance to destination Time to destination CURRENT VALUES PAGE 3 3 Speed Height Height max Slope avg ascent Pressure Speed max Slope avg descent Speed Odometer Moving time Speed avg Elevation gain ascent Odometer Moving time Elevation gain ascent descent Height max BIKE ANT PROFILE Speed Distance to waypoint Time to waypoint Elevation gain
66. t is missing the guided procedure may not be completed To proceed click on the flag corresponding to the language chosen for the installation The languages available are Italian English French German and Spanish END USER LICENCE AGREEMENT Please read carefully and accept the licence agreement displayed during installation start up if you do not agree you cannot continue installationprocedure NOTE the licence agreement in paper format is included in the box 69 INSTALLATION PROCEDURE MyNav may be installed directly on the palm top device by means of an ActiveSync connection else the files may be installed on a Secure DigitalCard through an USB connection NOTE if MyNav Map Manager software is not included the relating control will be disabled INSTALLATION VIA ACTIVE SYNC Skip to Component selection LOCAL INSTALLATION The installation folder may be chosen if a SD card copying device is used The card may be formatted as shown in the following pictures with Win 2000 OS please verify to safely remove the hardware before unplugging the memory card 70 CHOOSING THE PLATFORM CHOOSING THE DEVICE MODEL Select the device model only for MyNav navigators and click Next CHOOSING THECOMPONENTS TO BE INSTALLED Once the appropriate model has been selected a screen is displayed to choose what to install Options included e MyNav software e MyNav map e MyNav software m
67. tal Distance to destination waypoint Speed Avg Speed ascent descent Time to destination waypoint Arrival time at destination waypoint OTHER FITNESS DATA Battery Cadence max avg Pulsations in on HR max Date Calories Connection time HR sensor Time HR max avg To define which values are to be used and which lay out visualize see Par 6 5 6 The trip computer has three different types of values Current Values Lap and Totals Values CURRENT VALUES For each mode the user can have access to more windows containing the trip data touching the center of the display switch cyclically from onr window to the others Below a picture of the Current values window The values displayed can be deleted using Back to map Reset start of a new training session This is particularly recommended before starting a new route excercise to garantee values accuracy Doing the reset the data are deleted from the display but mantained stored in the Trip history Par 6 4 5 Sensor status Current mode and number of the current page Example of 8 elements per page Reset button change function 66 LAP The Lap mode proposes an interesting feature for those who want to run the same route more times and have the necessity to record the intermediate values Back to map Sensor status Active mode and page number Current lap value Previous lap value Lap begin new lap and change mode
68. te it or change the associated icon Press Add to create new categories specifying their name and their icon type the image for the icon has to be previously stored in the directory ICONS of the memory card icons are bitmap images suggested dimensions 18 18 pixel but standard icons included in Geo Note library can also be used Selected the favourite icon press Open to match it to the Geo Note 33 Modifying or deleting a Geo Note Stored Geo Notes can be deleted or modified directly from the Detailed Info window which can be opened clicking on the point Use Change to edit the element and the description associated to it choose Clear to cancel the point once and for all Geo Notes Import Export My Menu gt Geo Notes gt Import Export to import Geo Notes in the navigator or to export them to the PC Three types of import export are available e import MyNav format e export MyNav format e import Web format e export Web format e import GPX format e export GPX format VDO GP7 enables to import 20 000 Geo Notes the software will show an error message in case this number exceeded The difference between the two typologies of import export Web and MyNav format is related to the data structure Choosing one format instead of the other will ensure that MyNav will compute the data according to a predefined output structure Web MyNav GPX The
69. ter is available to make the gradient data more or less detailed The filter called Elevation gain filter has three different levels low average high With a low range of values the elevation gain data will be updated more frequently making the data more reliable but at the same time more affected by abnormal peaks due to the electroninc instruments or to small roughness of the terrain An average level can be a good compromise between sensitivity and reliability of the data setting high scale for data normalization with high filter interval only important gain will be surveyed In the graph below it is clear how the elevation profile intersects the black lines which represent the elevation gain normalization filter When the profile crosses a line the elevation gain value is updated and shows by the software 3 5 Low ELLE elevation gain f Uu 1 normalization A i RS Average IV elevation gain A 8 J e normalization a j p i f s High Y AN elevation gain a normalization 52 GPS COORDINATES WGS84 GAUSS BOAGA WGS84 is the format provided by default this setting can be changed according to users preferences in Gauss Boaga format see Par 9 LOAD SPEED CAMERAS To be able to use the acoustic alarm system for speed cameras detectors you should download one or more POls files from the web It is very important for the speed detection device POls to have the following
70. use continuous panning only on PDAs with suitable processors 42 MAP When more than one map is installed on the device it enables to switch the map simply choosing the preferred one from the list ACTIONS REDUCED EXPANDED The Menu on the map can be set as reduced widen with a click on the ACTION icon or as expanded ORIENTATION INDICATOR NORTH MAP TO COMPASS The indicator on the map can be set fixed to North or oriented in the direction of the movement as indicated by the GPS 6 5 2 Video Controls Use video controls for INDICATORS to enable disable form the display info about speed e scale e GPS status e coordinates e track recording e GPS status messages e direction e display trip computer values in map Choose the favourite option and confirm with Save Settings ROUTE INFO Enable disable the following route info e remaining distance until the next turn e visual indicator of deviation progression e road name corresponding to next turn e highway information ON OFF e route preview after calculation Choose the route info to be shown and confirm with Save Settings 43 POI GEONOTES QUICK SEARCH To activate Quick POI search choose the POI category you want to be displayed on the map Quick POI search Each POI result of the search can be stored among Favourites or used as a waypoint or as a destination of a route simply using the relating buttons C
71. wed in order to reach the selected destination Elevation profiles to see the elevation profiles of the calculated route Par 7 In Route Report window you may also find Route Waypoint Zoom to display the whole route showing a map portion containing starting points as well as destination and intermediate waypoints Elevations to display the elevation histogram of the route moreover it is possible to switch to the map histogram route view The button in Routes Report window allows to activate routes calculated or pre set and tracks if they are visualized on the map at the same time Usually all those elements can be viewed contemporaneously on the map but they can be activated only one at a time The contemporary view of a track and a route does not imply that they are all active at the same time activating a route or a track means enabling the relevant operating information on the screen as well as navigation functions in case of routes During route calculations the latter is automatically set as active NOTE 1 You cannot load 2 or more routes at the same time but it is possible to load up to 5 tracks in visualization 2 Assisted navigation function is only available for routes and in a simplified way for tracks Par 6 4 2 not in tours For each route calculated MyNav visualizes the elevation data in the form of an histogram The elevation profile is based on a calculation

SOFTWARE USER GUIDE

Contents

Download Pdf Manuals

Related Search

Related Contents