Installation and Operating Instructions Sequential
Contents
1. 7 3 4 Menu settings 8 3 5 the video 0 9 3 6 Connection and pinout of the alarm remote 10 4 11 925 12 Betriebsanleitung Installation and Operating Instructions gt www eeneo security com Mode d emploi Instrucciones de manejo 1 Safety instructions Before connecting the device and putting it into operation please read the safety notes and the operating instructions Keep the operating instructions in a safe place for later use Never cover the ventilation slits of the device The device is only intended for use in enclosed spaces and is to be protected from penetration by w2. In the Individual image frame by frame mode the display shows F If the TIME key is pressed a point lights up and the indicator shows the dwell time 0 for 1 to 9 seconds 1 for 10 19 seconds etc alarm occurs and CHANNEL B is selected the point at the bottom right in the LCD display blinks Key for selecting sequential AUTO or manual MAN mode or resetting the alarm if CHANNEL A is selected Keys for setting the dwell time from 1 to 90 seconds Keys for selecting the signal inputs in the mode for switching off inputs in the sequential mode In the mode the red LED at the selected input lights up in sequential mode the LED at the selected input lights up orange If all inputs are switched off the AVU 8 2AL 2 automatically switches to the first input The rubber feet on the base plate allow the device to be used on a desk top without slipping The rubber feet must be removed when fitting in a 19 rack so that the switcher can be built into the optionally obtainable rack fitting kit gt N ALARM IN 56 Rear side 8 1 T315mA 2 CHA 3 CHB 4 ALARM IN 5 CLK GND 6 ALM GND 7 VIDEO IN 8 AC IN OA Fuse holder for T 315mA fuse BNC socket of the video output of CHANNEL A for connecting to the main monitor BNC socket of the video output of CHANNEL B for connecting to a video reco
3. SYNCHRONISATION SCREEN DISPLAY CLOSE MODE DWELL TIME INPUTS FRAMES CLOSE ACTIVATION DWELL TIME ALARM DURATION ALARM FRAME DWELL ALARM SWITCH ON CLOSE ON OFF CLOSE Close NUMBER NUMBER DISPLAY TIME DISPLAY CLOSE CHANNEL To enter the Setup menu first press the key v and then 8 and hold both for at least 3 sec Note To superimpose the menu a video image must previously be connected to channel 1 The language menu appears on the screen Select menu point Confirm select Activate in sub menu Sequential image display single image display Duration of individual sequence images Number of connected inputs Number of full images at output B Leave the menu Channel A channel B or no alarm switch on Duration of alarm display where there are several alarms Duration of alarm tone in sec buzzer ON OFF of full image display Type of alarm contact positive normally closed negative normally open Leave the menu Remote control function is activated 9 pin socket The alarm function must be switched off in the alarm menu Remote control function is deactivated 9 pin socket Leave the menu Optimising possible in 127 steps ON OFF of individual signal inputs Sequence duration only possible in AUTO setting Leave the menu CLOSE STANDARD SETTINGS SELF TEST SAVE YES NO Reset back to the main menu without saving To set the standard s
4. Installation and Operating Instructions Sequential Switchers AVU 8 2 EC and AVU 8 2 AL 2 2225555 ae DK gt OID Contents 1 Safety instructions cece eseeseseseseseeeeseseseseeneeseseeeseseueseaeaeseseneaeseaseeseeueaeacaseeeneueaeasaseeeneeaeseaseeensasasesaeeseneneeeaeaees 3 2 AVU 8 QEC ose eeeseesessesessesessesessesssesessesssesesuesessesssesussescsesussesucuessscsessesesuesssesesuesecueseseeseeseseeseseseesesseeeeneeeseseneeeeeeneeees 4 2 19 GONELA NESCIUS 4 2 2 Description Of functions 4 2 3 12 7 6 5 3 AVU 8 2AL 2 RENE le Ee ROLETA A ONOI 6 3 2 Description Of functions 6 3 3
5. TL signal negative trigger pulse input Frame by frame switching 1 99 images Line locked synchronised camerag required Line lock synchronisation Can be set from 2 2ms to 2 2ms 127 steps Line locked synchronised cameras required Vertical interval switching Effective at same mains phase relation of camera and switcher Alarm remote control inputs 8 x programmable for closing or opening contacts Sequence start stop manual sequential remote selection of all inputs Alarm output 1 x open collector Alarm dwell time 1 90 sec channel be set or manual re setting Bypass function Manually programmable Menu languages German English Italian Monitor displays Camera No sequence alarm triggering and menu Operating voltage 15VAC 50 60Hz 230VAC 50Hz Power supply unit enclosed Power consumption Approx 4 5W Max 8W Casing Sheet steel Pantone Coolgray 1C Weight 1 5kg with power unit 2 5kg Option 19 rack mounts 11 76407 VDA AVU RMK1 19 rack for 1 x VDA 8CA or AVU 8 2 AL2 76408 VDA AVU RMK2 19 rack for 2 x VDA 8CA or AVU 8 2 AL2 5 Dimensional drawings A t AVU 8 2 AL 2 Jli 163 J 216 32 210 1 25 283 Dimensions mm Installati
6. ains phase relation of the camera and the switcher The synchronisation phase can be set in the menu in 127 steps 2 2ms 3 6 Connection and pinout of the alarm input remote control D 9F PIN No ALARM REMOTE CONTROL 5432 4 1 ALARM 1 Ti 2 ALARM 2 T2 3 ALARM 3 n c 4 ALARM 4 n c 5 ALARM 5 n c 6 ALARM 6 n c 9876 7 ALARM 7 n c 8 ALARM 8 n c 9 MASSE MASSE Alarm specification Remote control Monitor display Trouble shooting If only one input is activated that input is switched to CHANNEL A or CHANNEL B and the buzzer is activated In CHANNEL A the and LEDs flash The activated alarm input appears in CHANNEL A If there is more than one alarm the display alternates between the alarm inputs If CHANNEL is selected the point in the LCD display blinks The alarm output is activated switched to GND If more than one signal input is activated the alarmed inputs appear sequentially CHANNEL A or CHANNEL B CHANNEL is automatically switched from mode to single frame mode if the ALARM SINGLE FRAME SWITCHING FRAMES is activated in the menu This function is deactivated if VCR CLOCK is connected The alarm dwell time and alarm duration are set in the SET UP menu When the ALARM STOP key is pressed the alarm of CHANNEL A is manually reset If CHANNEL is set the alarm automatically resets after a certain time The LCD displ
7. ater and moisture e f water or moisture has nevertheless got in do not switch the device on in these circumstances Send to a qualified service centre for checking The casing may only be opened by authorised persons Repair only by qualified service staff Before opening the unit disconnect from mains voltage Never push metallic or other objects through the ventilation slits This could permanently damage the device The device is to be protected from excessive heat dust moisture and vibration Do not place heavy objects on the casing Pay attention when laying the connection cable and observe that the cable is not subject to heavy loads kinks or damage and that no moisture can get in Only use a mild domestic cleaner for cleaning the casing Never use thinners or petrol This can damage the surface permanently Note This is a class A digital device This digital device can cause harmful interference in a residential area in this case the user may be required to take appropriate corrective action at his her own expense 2 AVU 8 2EC 2 1 General description Sequential switcher with 8 inputs 2 outputs in desktop casing 8 video inputs 2 outputs A monitor and B VCR Outputs can be programmed manual or as sequential output Vertical interval switching Dwell time can be set Bypass function Operating voltage AVU 8 2EC 15VAC 300mA 4 5VA 2 2 Description of functions Fronts
8. ay shows the No of the alarm input If there are several alarms the LCD display switches over Remote control of CHANNEL is possible if the sequential mode is set The automatic sequence is stopped and re started using key T1 If stopped T2 is used for changing the channels manually The input REMOTE CONTROL must be selected in the SETUP menu and the alarm must be switched out The AVU 8 2AL 2 has a multilingual menu display English Italian and German The language is set using the menu The number of the signal input which appears on the monitor is shown in the lower right corner of the monitor When setting the interval time is shown in the bottom left corner If problems occur through earth loops between different video sources and the switcher the lid of the device must be removed and GND on K403 earth lead connection from casing to base plate is to be separated from the main plate The electrical earth of the plate is thus separated from casing and earth 10 4 Specifications AVU 8 2 AVU 8 2 AL2 Art No 76405 76406 Video inputs 8 x 1 1 5Vp p C CVS 750hms BNC Video outputs 2 1Vp p C CVS 750hms BNC all manually programmable or as sequential output Video band width 10MHz 308 Signal noise ratio gt 60dB Cross talk 56dB at 4 5MHz Dwell time 1 120 sec programmable for 1 90 sec channel can be set outputs A and B VCR head switch impulse T
9. ettings press the and 2 keys simultaneously Factory setting CHANNEL A AUTO mode Sequential 8 inputs LEDs light up Interval time 1 sec CHANNEL B AUTO mode sequential In the LCD display the channels 1 8 switched through interval time 1s full image ALARM Deactivated interval time 1s duration 20sec Full image switch over switched off Configuration NC Normal Closed REMOTE CONTROL Switched off MAINS PHASE RELATION Phase 0 SCREEN DISPLAY Display of input number of Display of interval time on Hardware check to activate the self test press keys v 5 simultaneously 3 5 Synchronising the video signal Contakt 1 ALARM OUTPUT have an amplitude of 5V 3 VCR CLOCK insert the plug bridge J102 into position 5V ex works setting is at 12V Alarm switches sensors Remote control keys External 1 177 Common lead GND 124 Internal Common lead GND Notes VCR CLOCK connection Line synchronisation Negative alarm impulse All alarm switches must normally be open and close on alarm Positive trigger impulse All alarm switches must normally be closed and open on alarm The VCR CLK connection is for synchronising the video signal and is a negatively triggered standard TTL input 12V to OV can be changed to 5V No rolling or flickering of the picture by synchronising the m
10. ide 1 2 3 4 4 e e e e 2 5 6 7 8 CHANNEL Key for selecting CHANNEL A or B for operating with the keys TIME MODE or 1 8 MODE Key for selecting the Auto sequence or Manual mode In Manual mode the LEDs 1 8 show the selected input which is switched to CHANNEL A or B In Auto mode the LEDs 1 8 show the current input of the selected CHANNEL A or B By pressing one of the keys 1 8 the LEDs show the active inputs The inputs are switched off by pressing the selected keys from 1 8 After this procedure the device reverts to normal operation If all inputs are switched off the switcher automatically switches to the first input TIME Key for selecting the dwell time If the selector key UP or DOWN is pressed the LEDs 1 4 show the selected dwell time Every time the TIME key is pressed the dwell time is increased or decreased by 1 second TIME sec LED1 LED2 LED3 LED4 1 7 OFF OFF OFF OFF 8 15 ON OFF OFF OFF 16 23 OFF ON OFF OFF 120 ON ON ON ON VIDEO INPUTS Keys for selecting the input in mode operation or for switching the inputs off in 1 8 Auto mode Rear side 1 AC IN 2 Video IN 3 Video OUT 2 3 Connections Note Standard connection socket for connecting to the power unit supplied BNC video input sockets Up to 8 video cameras or other video
11. on of one device in a 19 rack Rack No 76407 a Installation of two devices in a 19 rack Rack No 76408 eneo eneo is a registered trademark of Videor E Hartig GmbH Exclusive distribution through specialised trade channels only VIDEOR E Hartig GmbH Carl Zeiss StraBe 37 63322 R dermark Germany Tel 49 0 60 74 888 0 Fax 49 0 60 74 888 100 Technical changes reserved www eneo security com Copyright by VIDEOR E Hartig GmbH 03 2013
12. rder with an optional CLOCK output 9 pin plug for alarm input or remote control Connection of up to eight alarm sensors is possible Either the alarm inputs or the remote control can be activated through the 9 pin plug Setting in the menu Remote control is effected through 2 keys which are attached to the alarm socket Terminal socket for the VCR CLOCK input If a video recorder with a CLOCK output is used and connected to the VCR CLK input the sequence is switched from CHANNEL B by the clock impulse The VCR CLOCK input must be activated in the SETUP Alarm output terminal socket NO output with open collector It is suitable for connection to a video recorder with alarm input BNC sockets for video inputs Up to eight video cameras or other video sources can be connected here 230VAC mains input 3 3 Possible connections Note Take care that the mains plug is withdrawn before you connect other apparatus or open the device AVU 8 2AL 2 279 5 ops AC IN ALARM IN ALM GND CLK CHB ALARM SENSORS or REMOTE CONTROL 1 and 2 3 4 Menu settings CHB TIME AVU 8 2AL Set up Operation Settings in main menu CHANNEL B ALARM REMOTE CONTROL LINE SYN CHRONISATION SCREEN DISPLAY MODE ALARM al Hinweis English Italiano Deutsch A V X CHANNEL B ALARM REMOTE CONTROL LINE
13. sources may be connected here BNC video output sockets for channels A and B Take care that the mains plug is withdrawn before you connect other apparatus or open the device AVU 8 2EC POWER UNIT 15VAC 300mA 2 4 Settings STANDARD SETTINGS Hold the keys down together for at least 3 seconds All settings revert to the following values CHANNEL A Auto sequence mode 8 inputs dwell time 1 sec CHANNEL B Auto sequence mode 8 inputs dwell time 1 sec SYNCHRONISATION PAL 3 AVU 8 2AL 2 31 General description Video switcher with 8 inputs 2 outputs in desktop casing 8 video inputs e 2 outputs A monitor and B VCR Outputs can be programmed manual or as sequential output Vertical interval switching Dwell time can be set Bypass function e Operating voltage AVU 8 2AL 2 230VAC e A 19 fitting kit is available as an option e Eight alarm inputs 9 pole sub D plug Programmable through the monitor menu 3 2 Descriptions of functions TIME ALARM MODE CHANNEL A 4 22148 Frontside 1 CH B CHANNEL 2 MODE ALARM STOP 3 TIME 4 CHANNEL A DESK TOP RACK FITTING OMAN Y 6 eneo LCD indicator for showing the sequence CH B of CHANNEL B or the dwell time TIME of If the VCR CLOCK mode is selected the display shows
Download Pdf Manuals
Related Search