User Guide ice>Link Lite AV
Contents
1. User Guide ice gt Link Lite AV ice gt Link Lite AV provides a standard AV Audio Video output for the 5 Generation video iPod s This AV signal can be connected to virtually any video monitor converting iPod to an ideal component of car multimedia entertainment systems OPERATION Playback can be controlled using the iPod s buttons on a usual way or with an Apple IR Remote Controller model A1156 or compatible not part of the package See available functions below Next Track FW Ke Previous Ttrack Function __ _ Button p Press and hold e Wooo Cursor down _ Previous Playlist MENU Select Menu Press and hold for 3 seconds to activate Ignition on will activate ice gt Link Lite AV and start charging the iPod Turning ignition off will switch off the iPod and stop charging it WARNI NG Do not allow the Apple iPod to distract you from driving Only operate the unit when stationary or let passengers to operate Neither Dension Audio Systems nor Apple Computer Inc its regional offices distributors or resellers accept any responsibility for any damage or injury as a result of using ice gt Link Lite AV with the iPod Exercise good judgment and keep your eyes on the road at all times 2006 06 06 ice Link Lite AV User Guide v1 00b INSTALLATION The best place to install the ice gt Link Lite AV may be somewhere behind the car radio or close to the video screen Join the power cable leads to th2. e radio harness or the video screen s power cable with the included ScotchLock then plug the connector to the ice gt Link Lite AV Black Ground Red Constant 12V Battery Purple Switched 12V ACC Fix the ice gt Link Lite AV with the supplied cable tie Connect the output signals to your entertainment system with a standard RCA extension cable Watch colour codes when plugging the cables Use a good quality cable to avoid accidental disconnection caused by vibration Next steps varies based upon the mounting options you purchased the package with Dock cable 1 The best place to install the ice gt Link Lite AV may be somewhere close to the car radio 2 Connect the 3 5mm Jack plug of the IR Eye to ice gt Link Lite AV 3 Remove the safety seal from the self adhesive back of the IR Eye and stick it to a flat surface at a convenience place Cradle 1 Assemble the base of the iPod Cradle with an optional vehicle specific adapter An optional adapter is not required however it is recommended for easy and damage free installation 2 Attach the base to the back with at least 2 screws 3 Insert the front of the cradle to the base piece 4 Once set the cradle should not be forced to a different position To adjust first loosen the screw tilt and rotate to realign and then fasten the screw again 5 Install the distance adapter space holder if you are using a 30GB iPod model Note Cradle has a built in IR Eye you do not need a
3. separate one TECHNICAL DATA Dimensions 104x30x30 mm Power supply 9 16 V DC Active Standby current lt 75mA 0 mA Operating Storage temperature 20 70C 40 90 C 2006 06 06 ice Link Lite AV User Guide v1 00b
Download Pdf Manuals
Related Search