ME.80-14/6ASW-P BATTERY CHARGER/POWER SUPPLY USER
Contents
1. ME 80 14 6ASW P_ BATTERY CHARGER POWER SUPPLY USER MANUAL WARNING This device like all electrical products MUST be treated with respect Follow these instructions to reduce electrical hazard risk The device MUST be grounded to reduce risk of electrical shock Input and output connectors and indicator of the device AC IN 230V 50 60Hz L N STATE 8 BATT DC OUT e Usage of the device a The device operates either as a battery charger or as a power supply You can choose the operating mode by setting of the nominal output voltage by a potentiometer installed inside the device The adjusted nominal voltage has to be measured by a multimeter If the nominal voltage is under 12 5 VDC the device operates as a power supply there is no deep discharge above 13 VDC it operates as a battery charger 1 Battery charger Connect output BATT to the battery and the output DC OUT to the load The output voltage is 13 8VDC maximum current is 6A If loading current is chosen to 5A the charger can supply 1A for battery charging Pay attention to the polarity Connect mains voltage to AC IN 230V 50 60 Hz The meaning of the STATE signal Blinking green Mains and battery voltage is OK Bilking green red Mains voltage failure in battery mode Blinking red Battery deep discharge The device charges the battery automatically according to I U characteristic there is no need to any in2. tervention In case of mains power cut the device prevents the deep discharge or failure of the battery by switching off the load at below 10 5 VDC battery voltage 2 Power supply Application example supply of 12V DC cameras Connect the mains voltage to the input connector 230V 50 60Hz Adjust the output voltage by potentiometer installed inside the device to 12V measured by a multimeter Use the connector DC OUT and or ACCU Max loading current is 6A The meaning of the STATE signal Continuous green Output is OK Continuous red Output is overloaded The signal alters from green to red if the output voltage run under 11 VDC Specifikations Input 230V 50 60Hz 10 Output 12V 13 8V 6A Insultation class I Protection IP 00 Max ambient temperature 50 C
Download Pdf Manuals
Related Search