CARDBUS ADAPTER PCI CARD User Manual
Contents
1. CARDBUS ADAPTER PCI CARD User Manual Features Compliant with PCI local bus specification 2 3 Compliant with PC card standard release 8 1 specification Works with various types of 16 or 32 bit CardBus PC Cards Advanced Configuration and Power Interface ACPD Specification 2 0 Compliant Bridge function between PCI bus and CardBus Supports PC Card or CardBus with Hot Insertion and Removal Support Windows 2000 XP Server 2003 Vista 7 System Requirements Windows 2000 XP Server 2003 Vista 7 Pentium or equivalent PC with an available PCI slot Hardware Layout Note The ejector lever can be placed in two positions locked and unlocked When inserting a PC Card the lever N can be in either position However the lever must be in the unlocked position to eject a PC Card To unlock the lever push it until you hear a click then release it Hardware Installation General instructions for installing the card are provided below Since the design of computer cases and motherboards vary refer to your computer s reference manual for further information if needed 3 Turn OFF the power to your computer Unplug the power cord and remove your computer s cover Remove the slot bracket from an available PCI slot LR LE Carefully align the card to the selected PCI slot push the board down firmly but gently until it is well seated de Replace the slot bracket s holding screw to secure the card2. 6 Replace the computer cover and reconnect the power cord Driver Installation Please make sure the board is installed before proceeding with software installation Windows 2000 XP Server 2003 Vista 7 Windows 2000 XP Server 2003 and Vista will automatically detect and install the correct drivers for the PC Card adapter Restart Windows if you re prompted to do so To Verify Driver Installation 1 2 Check Device Manager to verify successful driver installation Look for the following Windows 2000 XP Server 2003 7 Double click PCMCIA adapters Generic CardBus Controller should be displayed Windows Vista Double click PCMCIA adapters Texas Instruments PCI 8x12 7x12 6x12 CardBus Controller should be displayed If this entry doesn t appear shut down your system and make sure the PCI board is properly seated Or install the PC Card adapter into another PCI slot and try again Inserting Removing the PC Cards Inserting the PC Card There s only one way the PC Card can be inserted into the slot Do not try to force it in if you meet some resistance Removing the PC Card Simply push the ejector lever and the PC Card will slide out from the card slot
Download Pdf Manuals
Related Search