pets Steam Mop User Guide IMPORTANT: RETAIN FOR FUTURE
Contents
1. We re here should you need us For Customer Services amp Spare Parts please call 0345 209 7461 Opening times Monday Friday 8am 6pm amp Saturday 9am 1pm Or visit us at www productcareuk com 00000 Guarantee This product is guaranteed for 12 months from the date of the original purchase If any defect arises due to faulty materials or workmanship the faulty product must be returned to the place of purchase Refund or replacement is at the discretion of the retailer The following conditions apply e The product must be returned to the retailer with the original proof of purchase e The product must be installed and used in accordance with the instructions contained in this instruction guide and any other instructions for use which has been supplied e It must be used for domestic purposes only and for its intended use e This guarantee does not cover wear and tear damage misuse or consumable parts This does not affect your statutory rights 00000 Customer support Attach your receipt to this page for proof of purchase We re here should you need us For Customer Services amp Spare Parts please call 0345 209 7461 Opening times Monday Friday 8am 6pm Saturday 9am 1pm Or visit us at www productcareuk com Produced for G2S Limited Wigan WN2 4EZ Disposal information This symbol is known as the Crossed out wheelie bin Symbol When this symbol is marked on a product b2. the tanks Pull the microfibre cleaning pad from the base of the mop head IMPORTANT Never store the steam mop with the pad fitted Wind the power cord around the top and bottom cord grips on the handle Slot the end of the power cord into the grip on the top power cord grip Note The top power cord grip can be rotated so the power cord cable can be easily removed when needed Cleaning and Care If you live in a hard water area over time the filter will become blocked and affect the performance of the steam mop Check and change the filter regularly to ensure your steam mop works to its optimum level As the filter becomes more blocked the colour will darken and discolour The filter should be changed every 6 months To change the filter remove the water tank 1 on page 8 Grip the water filter and pull upwards 2 Slot the new water filter into the back of the steam mops body Ensure the guides on the sides of the filter are correctly fitted New filters are available to purchase from Product Care call 0845 209 7461 or visit us at www productcareuk com Before you clean the appliance disconnect the mains plug from the wall socket To clean the exterior of the device use a damp soft cloth and mild detergent NEVER IMMERSE THE STEAM MOP IN WATER When wiping off the main body do not allow moisture in the area around the on off button or indicator lights Wash non electrical accessories in warm soap
3. hard floors Pull trigger on the handle 1 to release the steam Move the steam mop backwards and forwards across the floor 2 For stubborn dirt or stains focus the steam mop over the area for a few seconds Note Do not leave the steam mop over one area for more than a few seconds This can damage the floor Refreshing carpets Pads can be used for both functions but if you have used the solution on one floor and do not intend to use it on another you will need to clean change the pad Place the mop head into the carpet glider 1 Note The mop head does not attach to the carpet glider but just sits in it Pull the trigger on the handle 2 to release the steam WARNING Test the solution in an inconspicuous area before using on floors Move the steam mop backwards and forwards across the carpet again paying particular attention to well trodden and frequently used areas When not using the mop place it on the cooling tray provided Storing your steam mop Place the mop head on the cooling tray that has been provided after every use When you have finished cleaning your floor switch the steam mop off by pressing the ON OFF button Switch the power off at the plug socket and remove the plug Remove the water and solution tanks as per pages 8 and 9 Unscrew the caps and pour any unused liquid down the sink IMPORTANT Always wipe up any spilled solution Never store the steam mop with liquid still in
4. to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard This product is intended for household use only Do not use outdoors DO NOT use to clean pets this is a floor cleaner only We recommend that you do not use near pets when steam cleaning This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge IF they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised Keep the appliance and its cord out of reach of children less than 8 years e Do not operate this appliance for anything other than its intended use This product is intended for household use only Do not use outdoors Do not immerse in water or other liquids for cleaning 00000 Safety instructions Do not direct steam at people animals electrical outlets or equipment containing electrical components Unplug from power outlet when not in use Do not leave steam mop unattended while plugged in Do not
5. turning it anti clockwise and lifting Fill the tank using the filler cup with 30ml of refresher solution amp 150ml of water Screw the cap back onto the tank by turning it clockwise Again turn the tank upside down over a sink IMPORTANT Only use recommended refresher solution Solution must be diluted with water as per the above instructions Always cover food preparation areas and remove food from all surfaces Do not clean surfaces that come into direct contact with food Slot the solution tank back onto the steam mop Push down on the tank until it locks in place Using your steam mop Fasten the microfibre cleaning pad on the base IMPORTANT Never use the steam mop without the microfibre cleaning pad fitted correctly Plug the steam mop into a mains socket and turn the power on Press the ON OFF button on the front of the steam mop body in to switch the mop ON Press the button again to switch it OFF When the steam mop is turned on the power light will illuminate A few seconds later the steam light will illuminate this shows that the steam mop is ready to use IMPORTANT Always ensure the solution dial is set to close when not in use If you wish to use the refresher turn the solution tank dial to open to add refresher solution to the steam To recline the handle place your foot over the shoe symbol on the side of the mop head and gently pull the handle downwards Cleaning
6. use with damaged cord or plug Do not use steam mop if it has been dropped damaged left outdoors or dropped into water Keep the steam mop away from water do not allow it to get wet If unit is wet do not plug unit into wall socket or turn unit on Do not handle steam mop with wet hands Do not pull or carry by cord use cord as a handle close door on cord pull cord around sharp corners or edges or expose cord to heated surfaces Do not unplug by pulling on cord To protect against electrical shock do not immerse cord plug or appliance in water or other liquid Unplug from the mains outlet when not in use before putting on and taking off parts and before cleaning The use of accessory attachments not recommended by the appliance manufacturer may cause fire electric shock or injury Only use the accessories supplied by the manufacturer Do not let the cord hang over the edge of the worktop or touch hot surfaces Never remove parts from the appliance such as the screws and so on 00000 Safety instructions e The filling aperture must not be opened during use Do not use appliance in an enclosed space filled with vapor given off by oil based paint paint thinner some moth proofing substances flammable dust or other explosive or toxic vapors e Do not use on leather wax polished furniture or floors synthetic fabrics velvet or other delicate steam sensitive materials Do not immerse unit in water or o
7. For Customer Services amp Spare Parts please call 0345 209 7461 Opening times Monday Friday 8am 6pm amp Saturday 9am 1pm Or visit us at www productcareuk com Contents Page i Safety instructions EPOC E 3 3 Steam mop feature diagram O E E E 6 Steam mop assembly EE PEE E 7 i Using your steam mop EEE EEEE T 8 as Storing your steam mop In 12 i Cleaning and care E aoas s 14 Problem solving E E EE EEEE 15 E Guarantee ais 18 i Customer support pea 19 7 Spare parts EA E E E E EE 20 i Connection to the mains supply ies 21 Thank you for purchasing your Abode Pets Steam Mop da With a three corner mop head for flexible cleaning and an ergonomic handle for E comfort cleaning your floors has never been so easy What s more the pet friendly deodoriser leaves your home smelling fresh killing 99 9 of household germs when used with steam To get the best from your new cleaner take a few moments to read these instructions and keep them in a safe place for future reference Should you require any further assistance our friendly Product Care team will be happy to help For Customer Services amp Spare Parts please call 0345 209 7461 Opening times Monday Friday 8am 6pm amp Saturday 9am 1pm Or visit us at www productcareuk com IMPORTANT SAFETY INSTRUCTIONS Safety instructions READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING It is hazardous for anyone other than a competent person
8. atteries it means that the product batteries should not be disposed of with your general household waste Only discard electrical electronic battery items in separate collection schemes which cater for the recovery and recycling a of materials contained within Your co operation is vital to make sure the success of these schemes and for the protection of the environment For your nearest disposal facility visit www recycle more co uk or ask in store for details Vo We reserve the right due to possible changes to design to alter the instruction manual without prior notice 00000 Spare parts Part 10 Odour refresher solution 11 Cooling Tray Handle Hard water filter Microfibre cleaning pad Filler cup Solution tank Water tank WOON DUN BRWNP Body Mop head Carpet glider We re here should you need us For Customer Services amp Spare Parts please call 0345 209 7461 Opening times Monday Friday 8am 6pm Saturday 9am 1pm Or visit us at www productcareuk com 00000 Connection to the mains supply WARNING THIS APPLIANCE MUST BE EARTHED This appliance is designed to operate from a mains supply of AC230V 240V 50 60HZ Check that the voltage marked on the product corresponds with your supply voltage This product is fitted with a 13A plug complying with BS1363 If this plug is unsuitable or needs to be replaced please note the following Important The w
9. e floor and lift the steam mop head placing onto the pad Make sure the blue microfibre side of the pad is on the floor and attach the mop to the other side After use let the steam mop rest in the cooling tray provided To remove the mop pad hold you foot on the edge of the pad and lift away the steam mop 4 Lift the mop and place the head into the side of the carpet glider that has space for the mop head The mop head rests in the glider and does not click into place 1 From above the steam mop grip the sides of the water tank located on the back of the main body and pull upwards to remove Unscrew the cap on the water tank in an anticlockwise direction and remove You could use the tap to fill being careful not to overfill Replace the cap on the water tank and turn clockwise to secure Turn the tank upside down over the sink to let any water from the cap drain out Slide the tank back into the body ensuring the cap goes in the correct space To refill unplug and follow the same procedure as above To empty use the same procedure as filling but empty rather than fill the tank 2 Follow the same procedure as the water tank but measure approximately 30ml of refresher solution and 150ml water and add to the smaller solution tank located on the front of the steam mop Note Ensure the solution tank dial is set to close when cleaning on carpets and use a clean mop pad 00000 Problem Solving PROBLEM The mop is not wo
10. ed parts e Damage to the main body and separate components e Damage to the plug or cable If you can see any damage do not use the steam mop and refer to page 19 Slot the handle into the top of the body of the steam mop You may need to push the stud on the handle inwards to fully insert the handle IMPORTANT Ensure the stud on the handle protrudes through the hole in the housing on top of the steam mop Slot the insert on the bottom of the steam mops body into the housing on the back of the mop head Check that the mop head is the correct way round refer to diagram IMPORTANT Ensure the stud on the insert protrudes through the slot on the mop heads housing Using Filling the water tank Grip the sides of the water tank and pull upwards to remove Remove the cap on the top of water tank by turning it anti clockwise and lifting Fill the tank with 500ml of water using the filler cup Screw the cap back onto the tank by placing in in the bottle and turning it clockwise Note When you turn the tank upside down some water may drip out of the cap Ensure the tank is turned upside down over a sink before transporting it to the steam mop Slot the tank back onto the steam mop Push down on the tank until it locks in place Using Filling the solution tank Grip the sides of the solution tank on the front of the steam mop and pull upwards to remove Remove the cap on the top of the solution tank by
11. ires in the mains lead are coloured in accordance with the following code GREEN YELLOW EARTH BLUE NEUTRAL BROWN LIVE DANGER Electric Shock Risk 00000 Connection to the mains supply For UK use only Plug fitting details where applicable As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The GREEN YELLOW wire is the EARTH and must be connected to the terminal which is marked with the letter E or by the earth symbol or coloured GREEN or GREEN YELLOW The BLUE wire is the NEUTRAL and must be connected to the terminal marked with the letter N or coloured BLACK The BROWN wire is the LIVE wire and must be connected to the terminal marked with the letter L or coloured RED Always ensure that the plug cord grip is fastened correctly If a 13A BS1363 fused plug is used it must be fitted with a 13amp fuse conforming to BS1362 and be BSI or ASTA approved INSI DE VIEW FUSE EARTH YELLOW GREEN NEUTRAL BLUE LIVE BROWN CORD GRIP 00000 Oabode Model number ADSM5001 R2
12. n and power button is pressed When the blue light has been on and the water has heated sufficiently after around 40 seconds the light on the right should illuminate green indicating it is steam ready 1 The solution tank needs to have 5 parts water to 1 part refresher in The recommended amount is 30ml Abode refresher with 150ml water 1 When filling the tanks screw the lids on securely and tip the tanks upside over the sink to enable water from the lid to drain Avoid overfilling the tanks 2 Do not leave the steam mop concentrated over one area for more than a couple of seconds This could damage your floor and may cause small puddles of water to leak 3 You need to let the water heat up in the tanks for at least 60 seconds before pulling the steam trigger Make sure the power is switched on 1 You can only use refresher solution on sealed hard floors Do not use on carpets this can cause damage If you are unsure contact the manufacturer 2 Fill the tank and set the dial on the front of the mop to open to start using the refresher on sealed hard floors 00000 Problem Solving PROBLEM POSSIBLE PROBLEM POSSIBLE SOLUTION The filter needs 1 Contact customer services using the details on the replacing bottom of this page The indicator lights 1 The unit may notbe 1 Verify the unit is plugged securely into an approved plugged in properly the electrical outlet and that the fuse or breaker is functioning are not w
13. orkin g fuse or breaker may not properly be working 1 First time using 1 If this is the first time you are using the mop continue i i product using the product The smell may be due to new parts There is a peculiar being heated up for the first time smell coming from the unit 2 This is not the first 2 Discontinue use if problem persists and contact time the product has Customer Services using the details on the bottom of this been used page 1 The mop pad is 1 Wash the mop pad following cleaning and care The mop padis not saturated and needs instructions on page 14 of the instruction manual picking up dirt washing provided Parts have 1 Either the 1 Call customer services or visit the website detailed at broken need water solution tank cap the bottom of this page replacing mop pad carpet glider filler cup filter cooling tray or handle have broken or been lost 2 None of the above 2 Discontinue use and contact customer services using the have broken but another details on the bottom of this page part has I have lost the 1 The instruction manual 1 It is important to have a copy of the instruction manual instruction manual has been lost or Visit www productcareuk com or contact customer provided misplaced services using the details provided on the bottom of this page Note When cleaning carpets turn off the steam mop set the dial on the front of the body to close and use a clean mop pad and the carpet glider
14. rking steaming Indicator lights The mop is leaving the floor streaky The steam mop is leaking Using refreshers POSSIBLE PROBLEM 1 The power button has not been pressed 2 Water tank may not be filled 3 The unit may not be plugged in properly the fuse or breaker may not be working 4 The steam trigger has not been pulled 5 The filter had become blocked 1 What do the indicator lights mean 1 The solution has not been diluted 1 The water solution tanks have not been tipped over a sink have been overfilled 2 The steam mop has been held over one area for too long 3 The water has not heated sufficiently 1 What can I use refreshers on 2 How do use the refresher solution POSSIBLE SOLUTION 1 Press the power button on the centre of the steam mop This should illuminate the power indicator light Ensure you have waited 40 seconds for the water to heat up this should allow the second indicator light to illuminate green 2 Make sure the water tank is filled Refer to page 8 of the instruction manual provided 3 Verify the unit is plugged into an approved electrical outlet is switched on and that the fuse or breaker is functioning properly 4 You will need to pull the steam trigger under the handle for steam to begin emitting 5 If the filter has become blocked you will need a replacement filter 1 The light on the left illuminates blue when the mop is plugged i
15. ther liquids e Never put descaling aromatic or alcoholic products into the steam mop as this may damage the unit e Close attention is necessary when used near children e Do not store with a wet mop pad still attached e Using distilled or demineralized water will maximize the performance of your steam mop e Use extra care when cleaning on stairs e WARNING Refreshers MUST NOT be used on carpets Do not use steam for space heating purposes household use only e Use on waxed or some unwaxed floors may diminish glossiness Do not use on unsealed wood floors Test in an inconspicuous area or check the care instructions from your flooring manufacturer Symbol IEC 60417 5597 2002 10 is used on the unit to indicate that this unit operates with hot water vapour steam To avoid scalding and burns take extra care when in use 00000 Steam mop feature diagram Handle Steam Solution release trigger Upper power cord grip Lower power cord grip Solution tank Water tank On Off button Hard water filter OU 0 N WD Ww A W N e Indicator lights 10 11 12 13 14 15 16 17 Solution tank dial Mop head Microfibre cleaning pad Carpet glider Filler cup Power cord Odour refreshers Cooling tray 00000 Steam mop assembly Before using your steam mop Remove all packaging and lay out the separate components Check the steam mop after unpacking for any visual damage such as e Misaligned or damag
16. y water and allow to dry thoroughly before reuse If the steam mop is damaged contact the customer service helpline Care of your microfibre cleaning pads Wash pads in warm water no more than 40 degrees Wash separately Do not use fabric softener and do not tumble dry Dry ona line Should there be any loose threads on the microfibre pad carefully cut the threads with scissors Do not try to pull any threads or cut any threads at the base 00000 Problem Solving PROBLEM Trouble assembling disassembling steam mop Filling Emptying water tank POSSIBLE PROBLEM 1 Difficult to attach mop head 2 Difficult to assemble handle 3 Difficult to attach mop pad 4 Difficult to attach carpet glider 1 Difficult to fill empty water tank Note Do not put any solution in the water tank 2 Difficult to fill empty solution tank POSSIBLE SOLUTION 1 The main body of the product can be pushed down into the nozzle of the mop head Ensure the groove is aligned correctly with the body Refer to page 7 of the instruction manual provided Do not disassemble the heap after use 2 Slot the handle into the top of the body of the steam mop You may need to push the stud on the handle inwards to fully insert the handle The stud should protrude through the hole at the top of the body for it to be secure To remove the handle push in the stud whilst lifting the handle upwards 3 Lay the mop pad on th
Download Pdf Manuals
Related Search