Pop-Up-Socket —Installation & Operating Instructions
Contents
1. Pop Up Socket Installation amp Operating Instructions 3 x UK Plug Sockets MAX 3250W 2 x USB power supply 2 x 500ma Product code POW 2S Installation 1 Cut out a 102 105 mm diameter hole in work surface 2 Ensure there is sufficient space under the surface for the unit when it is in the closed position 3 Remove the locking ring from the collar by rotating it in an anti clockwise direction 4 Insert socket into the hole 5 Place the locking ring onto the collar and rotate clockwise to tighten against the underside of the work surface 6 Connect the socket to power supply using the pre wired UK plug Operation 1 To use the PowerPort socket press the lid and it will pop up allowing you to gently pull up the unit until it engages into position 2 The Powerport socket is now ready for use 3 Close the unit by gently pushing on lid to disengage the locking mechanism Maintenance amp Care 1 Always disconnect the power prior to cleaning 2 Periodically wipe over with soft cloth 3 Do not use harsh chemical cleaning products as it may damage the finish ATTENTION Please ensure when using the USB power supply do not use devices that exceed the stated amperage
Download Pdf Manuals
Related Search