Graham Hills 5.15 - Audio Visual Equipment
Contents
1. Graham Hills 5 15 Audio Visual Equipment Operating Instructions The AV equipment in this room is controlled via the Touch Panel Controller is currently starting It will take 30 seconds before an image appears on screen The display will now change to show a a selection of buttons which rep the range of available facilities You can select from DVD VCR Doc Camera Laptop and Main PC 41 Touch the panel once with your hand The University crest will appear Touch the panel again The display will change to say The projector Using a laptop with the Data Projector 2 Follow step 1 above and select Laptop on the Touch Panel The screen will ower automatically 3 Connect the monitor cable which is coiled on top of the lectern to the monitor socket on your laptop 4 Now switch your laptop on If your presentation has sound connect the small audio plug to the headphone socket on your laptop Adjust the sound level by pressing the Volume Control button to the top right of the panel Increase Decrease and Mute buttons will appear at the top of the panel You should now be able to see the output from your laptop on the screen If not you should toggle your laptop s screen output using the appropriate function key It is most often Fn F7 but it this can vary depending upon the model of laptop being used 5 Please shut the system down when you have finished On the panel at the bottom p2. ill switch on lighting the transparency from underneath 14 To focus at any time press the AF button For more info please go to http ww touchboards com samsung pdf SDP 900DXA_guide paf nb Please shut the system down when you have finished following step 5 in the preceding section Microphones There are 2 microphones available for use a lectern 15 To switch on the tieclip microphone and a tieclip radio microphone mic open the front flap by pinching the two side buttons between your thumb and forefinger Press and hold the ON OFF button The display wil iluminate momentarily and the red LED will come on 46 To switch on the lectern mic press the button at the base of the microphone The lamp will iluminate red The sound level is preset so cannot be adjusted Switching off both microphones is simply a matter of pushing the same buttons used to switch them on PC A PC will be installed permanently in this room in the near future ASSISTANCE If you experience difficulty with the AV equipment or wish to report a fault please contact Learning Services on Ext 5999 or 0141 548 5999 Alternatively you can em is LS roomsupport strath ac uk http www learningservi strath ac uk
3. ress the Press here to Shutdown button The panel will now show 2 buttons a blue NO button and a red YES button Press the red YES button The system will now shut down VCR and DVD playback 6 Switch the system on following step 1 above and select either DVD or VCR on the Touch Panel The panel display will change to show buttons which control either the DVD or the VCR You can use these controls to navigate through the various chapters play pause etc 7 The DVD VHS player is housed in the lectern Now insert your DVD or VHS cassette into the machine as required 8 Adjust the sound level by pressing the Volume Control button to the top right of the panel Increase Decrease and Mute buttons will appear at the top of the panel 9 Please shut the system down when you have finished following step 5 in the preceding section Universityof Q Strathclyde Visualiser or Document Camera 10 Switch the system on following step 1 opposite and select Doc Camera on the panel 11 Ensure the visualiser is switched on The on off switch is on the far left of the visualiser s front panel A 12 With the visualiser you can display transparencies printed material or solid objects via the data projector To project printed sheets or solid objects the 2 overhead lights must be switched on by pressing the LAMP button B 13 To project transparencies the lamps should be switched off when the lightbox w
Download Pdf Manuals
Related Search