The ROMA II USER MANUAL AND INSTALLATION
Contents
1. IntelliHeat Jpdated 2 3 11 Intelligent Heating So The ROMA II USER MANUAL AND INSTALLATION GUIDE With Intelligent Technology www intelligentheat co uk INDEX EE PAGES 14 15 PAGE 16 PLEASE PAY SPECIAL ATTENTION USER GUIDELINES PRODUCT OVERVIEW LCD THERMOSTAT CONTROL AND REMOTE PROGRAMMING LCD THERMOSTAT CONTROLS AND SETTINGS INSTALLATION USER GUIDELINES ELECTRICAL INSTALLATION GUIDELINES WALL MOUNTING INSTRUCTIONS GENERAL GUIDELINES ANTI DISASSEMBLY SPINGS SPECIFICATIONS AND WARRANTY PLEASE RECORD THE DETAILS OF YOUR PURCHASE NOTES INTELLI HEAT COMPANY INFORMATION 2 All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands PLEASE PAY SPECIAL ATTENTION Do not touch the radiator or thermostat when you are wet and do not install any part of the system outdoors Our radiators are safe and water resistant nevertheless we strongly advise you not to touch the radiator or thermostat with wet hands or feet or when any part of you is wet This product is designed for interior use only CLEANING Always ensure the radiator is turned off at the main power source and clean with a soft non abrasive damp cloth Never wash with water or allow water to go onto the thermostat or any electrical connection Do not cover or lay any material over the radiator Do not lay any material over the radiator especially if it i2. Do not use any water or cleaning products when cleaning the LCD display use a slightly damp soft cloth to wipe it clean ensuring that you do not apply too much pressure Never allow any water cleaning fluid or spray cleaning product to go onto the thermostat or any other electrical connection PLEASE NOTE This radiator may sometimes produce light clicking sounds this is nothing to be concerned about These sounds are produced by the interlocking of certain types of thermostats A radiator may also produce light cracking noises especially when first installed This is also nothing to be concerned about This is due to the expansion of the various metals the radiator is composed of This is a natural occurrence associated with electric heaters It does not signal a fault and will not affect performance 4 IMPORTANT It is essential that you keep this user guide and all documentation related to this product for further reference and for the support of your warrantee IF YOU SELL OR TRANSFER Should you decide to sell or transfer this product to a third party this manual must also be passed to the new owner to enable a full understanding of the product and to ensure safety and adherence to these guidelines Also should any warranty period still be in effect failure to comply with this will invalidate the warranty We strongly advise you to seek expert advice if you are unsure about any aspect regarding the installation of
3. 1 All electrical installation must comply with the current regulations standards and code of practice in effect in the country where the product is to be installed 2 The electrical connection of these radiators must be carried out using a standardized junction box In both kitchens and bathrooms the connection box must be installed at least 25 cm above the floor 3 These radiators must be supplied with 230 V 50 Hz single phase and neutral No other power supply can be used 4 Each radiator must be supplied with a dedicated power cable protected with a 10 amp circuit breaker for appliances ranging from 500 W to 2000 W power rating CAUTION These radiators are double insulated therefore they are not earthed and the radiator cable does not include an earth wire yellow green Each radiator cable has a Live BROWN Neutral GREY and a BLACK wire which is the PILOT WIRE NEVER CONNECT or allow the accidental connection of the BLACK PILOT WIRE to the Live Earth connections of the power supply If this occurs it will Neutral or damage the thermostat beyond repair The black wire is for connection to an external programmer only this could be a hard wired wireless system please contact Intelli Heat for advice on such systems If a pilot wire programmer system is not used the black wire must be properly isolated insulated to avoid any connection to the live neutral or earth of the power supply INSTALLATION REGU
4. Distance from wall or furniture Minimum 100mm C Distance from floor Minimum 100mm Max 150mm YES A Take good care of your radiator and it will take care of you When installing removing the regulator verify that the main power supply is switched off We strongly recommend that the thermostat s electric cable is connected to the main power supply using a junction box switched fused spur Place the junction box at least 25cm above the floor install the junction box behind or next to the thermostat however it can be fitted with an electrical plug and plugged into an electrical socket power supply circuit must be sectioned Sectioning must be done using a multi polar devise sectioning all the power supply terminals The sectioning distance between the contacts of each terminal must be at least 3mm ELECTRICAL WIRING WARNING Never connect or allow the accidental connection of the BLACK PILOT WIRE to the Live Neutral or Earth connections of the power supply If this occurs it will damage the thermostat beyond repair Such connection will render your warrantee invalid All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands ANTI DISASSEMBLY SPRINGS To avoid any risk of accidents we recommend that you fit the anti disassembly springs if supplied Fix the springs on the top radiator brackets after it is installed Press on the bo
5. the size and model some radiators can be very heavy therefore always take every safety precaution when storing transporting and installing heavy radiators We strongly advise that at least two people lift move and install heavy radiators and that each radiator is professionally and securely fixed to the wall using the appropriate method and screw fixings suitable to the construction of the wall 3 AN All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands USER GUIDELINES FOR YOUR SAFETY IN ACCORDANCE WITH THE REGULATIONS The heating element inside each radiator is equipped with an integrated fuse In case of overloading the fuse melts and cuts off the power supply The heater element must then be changed by the manufacturer or by a qualified electrician familiar with such products If needed please contact your dealer MAINTENANCE To ensure the perfect functioning of your radiator and to ensure its durability it is necessary to clean the radiator at least twice a year Before you start the cleaning process you must ensure that the power supply is turned off at the main power source Clean the main body of the radiator with a damp soft cloth using if required a non aggressive and non abrasive cleaning product Clean the front and side surfaces including in between any grooves and fins and where possible the back surfaces of the radiator
6. LATIONS ELECTRIC RADIATORS IN WET ROOMS Kitchens and Bathrooms These radiators are Class Il insulated therefore earthing is prohibited These radiators are IP24 rated and therefore protected from splash water These radiators can be installed in bathrooms volumes 2 and 3 provided that it is positioned at least 60cm away from any splash area i e wash hand basin bath tub and shower tray The circuit supplying the radiator in wet room must be protected by a 30 mili amp Residual Currented Device to ensure safety BATHROOM ZONES The radiator must be installed with the main switch and other control devices outside of the bathroom Volume 2 Volume 1 h LED bon The radiator should not be installed beneath a wall outlet E was PASS AA 2 40 m A radiator installed in a wet room must be connected to the electricity supply using standardizes junction box without the use of a socket outlet Earthing is prohibited A USEFUL TIP Installation that involves simply positioning a radiator next to an existing power supply will keep the cost of installation down For example By replacing an electric storage or panel heater with your new Intelli Heat radiator in the same position However should you decide to position a radiator where there is not a power supply the cost of the installation will be higher it s best to plan your installation Therefore if convenient according to the
7. ables you to set your required comfort temperature level when it is connected to a pilot wire programmer GIF Mode or to the iControl remote programmer IRP Mode 10 Changing the screen brightness With the radiator off hold the left button Screen brightness will decrease from maximum intensity to the minimum intensity returning again to maximum intensity and so on When the intensity is to your liking release the button For your viewing comfort after 2 minutes of non use the screen light goes off It is just signaling radiator off on Radiant Touch any key to turn the light back on 8 11 Child lock protection To prevent unwanted tampering the ROMA Il can be locked by pressing both buttons once simultaneously a light touch When locked the screen will show ooo To unlock press both buttons again simultaneously Settings and screen symbols 12 Adjusting the temperature Left button To lower the temperature Right button to raise the temperature Drawing power to reach maintain set temperature Set temperature reached not drawing power ooo Keys locked Radiator off Standby LOC Functioning in normal stand alone mode GIF Set to function with a pilot wire programmer IRP Set to function with the remote programmer What if The screen is completely off Check to see if there is an electricity supply to the radiator Correctly wired switched on at
8. ator must fix the 3rd bracket to the wall using the appropriate be at least 10cm away from a right angled wall or any rawlplugs and screws Replace the radiator to rest on the item of furniture to ensure proper functioning bracket support arms RESPECT SAFETY Never open or interfere with any electrical housing or closed circuits Any interference by unauthorized persons will render your warrantee invalid Please ensure that all instructions are fully understood and adhered to 11 All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands GENERAL GUIDELINES D Please read these instructions thoroughly before installing and using a radiator A FOR YOUR SAFETY The installation must comply with the current regulations and best trade practice applicable to the country where it is fitted The thermostat is class Il protected against light splashes it can be installed in zone 2 and 3 in bathrooms but do not splash water onto the thermostat or any electrical connection Install a calibrated earth leak circuit breaker in accordance with current norms never touch the thermostat when in the shower or bath or when wet Never cover the ventilation holes on the thermostat Never clean the thermostat with water or a liquid cleaner A A CONNECTING TO THE ELECTRICITY SUPPLY RADIATOR WALL MOUNTING INSTALLATION A If under a shelf Minimum 100 mm B
9. available power supply points 10 All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands WALL MOUNTING INSTRUCTIONS J r a Top view of radiator showing position of fixing brackets Draw a horizontal line on the wall 20cm from the floor Position the bracket 14 cm in from the vertical line use it Use a spirit level to ensure that the line is perfectly level as a template to mark the position of the screw holes drill holes fix bracket using appropriate rawlplugs and screws es eee eeee Je T T FIX 2 BRACKET 46 eee eee eee lt lt lt eel Draw another horizontal line 50cm above the first line Repeat the process as per 4 detailed above Then put These are the levels the brackets are to be fixed Again the radiator on the two bracket supports the bracket use a spirit level to ensure the line is perfectly level arm extends between the first two metal fins Fins seen from above i POSITION u The bracket arm extends between the first two Radiator width metal fins of the radiator Accurately measure the width of the radiator and draw 2 Draw a vertical line between two elements at the centre vertical lines each side on the wall at the position where of the radiator Remove the radiator from the wall then the radiator is be installed The ends of the radi
10. bers Email address Contact Name NOTES 14 All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands PROVISION FOR ADDITIONAL NOTES 15 All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands amp IntelliHeat Intelligent Heating Solutions INTELLI HEAT Ltd Unit 18 Napier Place Stephenson Way Thetford Norfolk IP24 3RL T 0845 163 0055 F 0845 163 0045 E tech intelligentheat co uk www intelligentheat co uk support www i green co uk reen Total energy control a T Te mn Wilke n LE amp ii nubs Turg Ra ye lrg 16 All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands
11. gth it should not be extended or shortened Do not pull the electrical cable twist it or wedge it behind or in the fins of the radiator Should the electrical cable become damaged or the electrical installation was not carried out correctly or in accordance with the regulations you are at risk of suffering serious wounds which could be life threatening If the electrical cable is damaged it must be replaced by the manufacturer or by one of their after sales service personnel or by a fully qualified electrician who is familiar with these type of systems WARNING To avoid overheating never cover a radiator and never position it below a power socket PLEASE NOTE These radiators are filled with an accurate quantity of a special Thermodynamic fluid Any repairs that require the fluid tank to be opened must only be carried out by the manufacturer or by one of their approved after sales service personnel The manufacturer must be contacted in the event of any leakage of fluid All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands ELECTRICAL INSTALLATION GUIDELINES ESSENTIAL TARIFF INFORMATION ECONOMY 10 UNRESTRICTED is recommended to ensure minimal running costs Economy 7 is NOT suitable If you change your tariff from Economy 7 to another tariff you MUST ensure that the circuits supplying Intelli Heat radiators provide an unrestricted supply of electricity
12. pilot wire such as our ZoneRay or iGreen systems IRP Remote Programmer Mode to be selected when the radiator is operated using the compatible remote controller which enables various timings and temperatures to be set over 7 day periods The iControl unit is sold separately 3 To change the operating mode To select your required operating mode press the right button repeatedly temperatures will appear then after 25 2 the LOC option appears on the screen then press both buttons simultaneously to enter the mode menu LOC will blink then by pressing the right button once each time you will be able to scroll through to GIF then IRP When the operating mode you require appears on the screen press the left button once to confirm The operating mode will then be saved and 25 2 will appear Use the left button to lower the temperature if required If you want to change the operating mode press the right button until the current mode symbol appears then press both buttons simultaneously for just a second the screen will start flashing Again press the right button appears on the screen then proceed and finish as above repeatedly until your required mode 4 LOC Local Mode Manual setting of the temperature To select the operating temperature press the left button to lower the temperature and the right to raise the temperature The maximum temperature that can be selected is 25 2 C The minimum is 6 2 C For domes
13. re will blink use the and buttons to modify press SET button to confirm Then you will automatically be taken to the second slot repeat the same process for each slot up to the end of the day 12 midnight Then select the weekend days and follow the same process to set the timing and temperature slots Now you have created a full program e g P1 ready for transmission to the radiator Use with the remote programmer continued on page 7 All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands LCD THERMOSTAT CONTROL AND REMOTE PROGRAMMING 5 Continued USE WITH THE REMOTE PROGRAMMER iControl Transmitting a program to the radiator First ensure that the radiator is switched on and set to the IRP Mode see section 3 on page 6 for instructions to change the operating mode a Transmitting the time On the controller press the PR button repeatedly until the screen shows the time point the controller at screen on the radiator then press the TRANSMISSION button bottom left a dot on the LCD screen of the radiator will blink lightly to indicate that the transmission was successful b Transmitting a program On the controller press the PR button repeatedly until the screen shows the program you wish to transmit point the controller at screen on the radiator then press the TRANSMISSION button and the screen on the radiator will blink lightly to indicate
14. rect use care and regular maintenance of this product will contribute to its conservation If this product is incorrectly installed or used all rights under your warrantee will be rendered invalid Therefore please ensure all related advice instructions and guidelines are adhered to 5 NEVER connect the BLACK PILOT WIRE to an EARTH LIVE or NEUTRAL connection The black pilot wire is a signal wire It is only to be used for connection to an external programmer Connection of the PILOT WIRE to any LIVE NEUTRAL or EARTH connection will destroy the thermostat If the black pilot wire is not to be connected to an external pilot wire programmer it must be correctly isolated and insulated to ensure that this does not unintentionally occur The ROMA II is fully compatible with our ZoneRay and iGreen pilot wire programming systems All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands LCD THERMOSTAT CONTROL AND REMOTE PROGRAMMING 1 Switch on the electricity The device has 2 buttons to activate the device push both once 2 When the device is on LOC operating mode the temperature will appear on the screen There are three operating modes to choose from LOC Local Mode Direct stand alone control of the temperature Manual Control GIF GIFAM Mode to be selected when the radiator is connected to and operated by an external programmer via the
15. rmostat If the black pilot wire is not to be connected connection will destroy to an external pilot wire programmer it must be correctly isolated and insulated to ensure that this does not unintentionally occur The ROMA II is fully compatible with our ZoneRay and iGreen pilot wire programming systems CAUTION Before any installation or work on an electrical circuit you must cut off the power supply from the circuit breaker or from the main circuit breaker Always double check to ensure that no associated circuit or power supply is live before you install the radiator 9 TO START Check that the radiator is correctly connected to the electricity supply Then test the various functions of the controls For temperature control and programming please refer to pages 6 7 and 8 of this manual In the event of faulty operation first check that the appliance is properly connected to the power supply If everything seems to be in order you should first contact the person who installed your system if they are unable to assist you should then contact the supplier or the manufacturer SAFETY INSTRUCTIONS TO AVOID RISK OF ELECTROCUTION Do not tamper with modify or dismantle a radiator the thermostat or any associated control or electrical system Do not put any metal object into the thermostat The electrical cable is connected to the system by the manufacturer it is not replaceable and is supplied as a standard len
16. s damp or wet Never place furniture or any other object against the radiator Always ensure that the radiator is installed in an open area to allow optimum heat to be radiated do not install where curtains will be drawn over the radiator Pay attention when children are around Although our radiators are designed for ease of use and safety like with any other electrical or heating product always exercise caution where children are concerned We also strongly advise you not to allow children or any unsuitable person to tamper with any electrical connection or to operate any controls associated with the appliance Never hang from the radiator or load it with weight Never pull sit on hang from or load the radiator with any weight Such practice may damage the radiator or cause it to come loose from the wall or the wall fitting attachments which could cause serious injury Also to avoid such injury check from time to time to ensure that the radiator is securely fixed to the wall Do not tamper with or modify the product Never attempt to alter or modify a radiator or any associated control system or electrical connection Such action would invalidate the warranty and may cause system malfunction or injury If required our products should only be repaired by an appropriately qualified person Do not attempt any maintenance or replace any damaged components Do not apply stickers CAUTION ALWAYS HANDLE HEAVY ITEMS WITH CARE Depending on
17. t to your system as it will provide you with the ability to control minimize energy consumption The iControl programmer will enable you to program different temperature settings during set periods of each day over a 7 day period which is automatically repeated over every 7 days All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands LCD THERMOSTAT CONTROLS AND SETTINGS 6 Programming the operating GIF and IRP modes These operating modes allow the user to set different temperatures during the day It is possible to set the T High temperature or T Low temperature Both the temperature levels and the hours can be programmed 7 Activation of the operation mode to set temperature programming requirements using the remote controller To activate this operation please refer to the instructions on page 6 of this manual see how to select the IRP mode 8 Temperature settings in LOC Manual Mode If you scroll below 5 2 C See 4 Page 6 this symbol appears which represents anti frost By pressing the left button again the unit will show this symbol To heat up again press the right button until the desired the temperature from a distance using the optional remote temperature is reached You can change controller when the radiator is set in LOC mode 9 Set your comfort temperature in GIF and IRP Modes Unlike other electric heaters the ROMA II en
18. that the transmission was successful To modify a program transmitted to a radiator This is achieved by using the remote iControl unit First select the program on the remote control unit that was previously transmitted to the radiator Then modify that program following the instructions as outlined in section 5 pages 6 and 7 of this manual Once you have successfully modified that program aim the iControl unit at the LCD display on the radiator and press the TRANSMIT button bottom left When the modified program is transmitted to the radiator the LCD display on the radiator will briefly blink signifying a successful transmission replacing the previous program Power failure protection feature Once the required program has been transmitted to the radiator that program will be memorized and protected against power failure for up to 5 hours In the case of a prolonged power failure you must repeat the programming processes as outlined in section 5 pages 6 and 7 of this manual The iControl remote programming unit Infrared transmitter Ambient Temperature Programs Pi P2 O p3pa 202C Hour minute Days week Temperature setting and programming Programming Data On Off Transmission Transmitting data to the radiator LCD display on the radiator PLEASE NOTE The iControl wireless control unit is not supplied as a standard item with the ROMA II However we strongly recommend that you add i
19. the plug socket or spur point the circuit is live and that the fuse is ok The program schedule is not executed Check that the IRP mode on the radiator is set Repeat the time setting and download the program with the remote controller by verifying that each transmission is confirmed by the radiator screen flashing In any case wait one minute until the program schedule is operation All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands INSTALLATION USER GUIDELINES ELECTRICAL WIRING We strongly advise that all electrical installation be carried out by an appropriately qualified electrician These radiators are CLASS II double insulated The electric cable of this radiator does not include an Earth wire Earthing is prohibited ground connection is strictly forbidden For thermostats that are equipped with a pilot wire which is for connection to a pilot wire programmer it is essential to ensure that the LIVE LINE and NEUTRAL wires are correctly connected COLOUR CODE Power connection BROWN to LIVE LINE GREY to NEUTRAL The BLACK wire if used is to be connected to a PILOT WIRE programmer ONLY NEVER connect the BLACK PILOT WIRE to an EARTH LIVE or NEUTRAL connection The black pilot wire is a signal wire It is only to be used for connection to an external programmer Connection of the PILOT WIRE to any LIVE LINE NEUTRAL or EARTH the the
20. this radiator EE Waste electrical and electronic equipment WEE Please act responsibly when disposing of any electrical item The WEE Directive aims to both reduce the amount of electrical and electronic equipment being produced and to encourage everyone to reuse recycle and recover it Intelli Heat as a manufacturer fully complies with the UKs WEE Regulations For further information should you intend to dispose of an electrical item please visit Wwww environment agency gov uk All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands PRODUCT OVERVIEW The Roma II radiator is a high tech product with superior reliability a high level of performance and optimum energy efficiency we trust that you will be fully satisfied with this product The technology included in this product ensures maximum economic performance comfort reliability and scrupulously respects security and safety parameters Everything is designed and manufactured to ensure your complete satisfaction First of all you are advised to read this manual carefully so as to avoid making any mistakes during the installation and operation of the radiators MODEL ROMA II i f i WHAT YOU NEED TO KNOW This manual and any other supporting information present essential information to ensure the reliable and correct performance of these radiators The cor
21. tic comfort optimum energy efficiency we suggest 19 C 5 USE WITH THE REMOTE PROGRAMMER iControl To set the time Press the PR button left middle button on the remote controller repeatedly to scroll through the options until the time is shown 6 Then press the SET button right middle button the day indicator will flash Then using the and buttons you can scroll though each day Starting with Monday far left then press the SET button to select that day the hours will flash then use the and buttons to set the hour press SET to confirm then the minutes will flash press or to set the minutes press the SET button to confirm Setting remote hourly programming for each day Now you can create up to four different programs P1 to P4 In each case scroll through to the program you wish to modify by pressing the PR button repeatedly then select that program by pressing the SET button Once you have selected a program e g P1 you will need to create a program for week days and one for the weekend To do so use the and buttons to choose the week or the weekend days confirm by pressing the SET button You then have up to 6 different timing slots for the days and 00 00 will appear The second set of 00 will blink this is the ending time of that timing slot the first set of 00 is the starting time 12 midnight use the and buttons to set the ending time press SET to confirm the temperatu
22. ttom of the spring until it engages in the security position Pull the spring to engage in the security position SPECIFICATIONS ROMA II Power Watts 00 1200 1500 2000 Length Height mm 685 x 580 850 x 580 1010 x 580 1255 x 580 Depth mm 10 10 10 10 Number of Elements 7 9 11 14 Weight Kg E 20 25 32 CE WARRANTY CLASSE Il O IP24 The ROMA Il includes a free warranty five years on the main body and two years for all electronics This warranty is valid from the delivery date of your purchase This warranty covers any fault that may arise due to the faulty manufacture of the product It does not cover any fault that may be caused by miss use accidental or intentional damage caused by the purchaser or other persons after purchase or incorrect installation Please ensure that you keep all documentation relating to this product including your invoice as this will be required should you need to use this warranty Thank you for choosing our product and we wish you a lasting trouble free and enjoyable use of your new INTELLI HEAT product 13 All Rights on this USER GUIDE are Reserved No reproduction is permitted Intelli Heat and i Green are patented brands PLEASE RECORD THE DETAILS OF YOUR PURCHASE Date of purchase Date order received System purchased SUPPLIER DETAILS Company name Telephone numbers Email address Contact name INSTALLER DETAILS Date of installation Company name Telephone num
Download Pdf Manuals
Related Search