USER MANUAL LUX-LD30W LED MOVING HEAD
Contents
1. build up reduces light output performance and can cause overheating This can lead to reduced lamp life and increased mechanical wear Be sure to power off fixture before conducting maintenance Unplug fixture from power Use a vacuum or air compressor and a soft brush to remove dust collected on external vents and internal components Clean all glass when fixture is cold with a mild solution to the cloth or tissue and drag dirt and grime to the outside of the lens Gently polish optical surface until they free of haze and lint The cleaning of internal and external optical lenses and or mirrors must be carried out periodically to optimize light output Cleaning frequently depends on the environment in which the fixtures operates damp smoky or particularly dirty surroundings can require cleaning fluid Always dry the parts carefully Clean the external optics at least every 20 days Clean the internal optics at least every 30 60 days 10 Mounting instruction The fixture may be mounted in any position provided there is adequate room for ventilation It is important never to obstruct the fan or vents pathway Mount the fixture using a clamp Adjust angle of the fixture loosening both knobs and tilting the fixture After finding desired position retighten both knobs When selecting installation location take into consideration lamp replacement access and routine maintenance Safety cables must always be used Never mount in places where the fi2. 3 255 Gobo scroll anti clockwise slow fast Gobo rotation 000 No rotation 001 127 Clockwise fast to slow 128 255 Anti clockwise slow to fast Dimmer Strobe 000 Closed 001 115 0 100 Dimmer 116 243 Strobe slow to fast 244 255 Open Pan rotating Tilt rotating Pan amp Tilt speed 000 255 Fast to slow Pan fine 16bit Tilt fine 16bit Reset 000 149 No action 150 200 Electronic reset qtxlight 150 447UK User Manual LUX LD30W 150 447UK re Please disposal of the unserviceable device according to the current statutory reguirements 15 Technical specification Voltage AC 230V 50 60Hz LED Type 010 Angle 30 LED 1 x 30W White LED LED Life Upto 50 000 hours Fuse 2A Lux 850 3m Power Consumption 54W Beam Angle 12 degrees Dimensions 345 X 340 X 435mm Weight 6 8kg Note This product conforms to Laser and LED Safety standard BSEN60825 1 2007 qtxlight 8
3. Do not spread the smoke or bubble of effect machine directly to the device Do not use the device during thunderstorms and please disconnect the power Do not use solvents or aggressive detergent to clean the device Use a soft and clean cloth Do not modify the device or the connected power cord without authorization Use appropriate safety rope for safety Do not stare to the light E The symbol m determines the minimum distance from lighted objects The minimum distance between light output and the illuminated surface must be more than 0 1m 6 Connect with power supply The ground wire must be connected Use the plug to connect to the main power supply as following 7 Quick Trouble Shooting 7 1 if the unit is not functional Check if main power is on and fuse 7 2 if the unit is not reacting to music check the unit is in Snon mode on the display 8 Replacing Fuse Disconnect from the main power supply first then remove the fuse holder above the IEC Socket to reveal the fuse Replace the correct fuse rating as stated on lighting or user guide Then lock the fuse holder cover back into place qtxlight i User Manual LUX LD30W 150 447UK 9 General Maintenance To maintain optimum performance and minimize wear fixtures should be cleaned freguently Usage and environment are contributing factors in determining freguency As a general rule fixtures should be cleaned at least twice a month Dust
4. e product has been received in good condition Light x 1unit User s Guide x 1pcs If you find any accessory is missing or the lighting has arrived with any problems please contact your local dealer at once Do not try to fix this item yourself or you will lose the warranty Please keep the original package and invoice for any possible replacement or returned demand qtxlight 2 User Manual LUX LD30W 150 447UK 3 Installation Every person involved with the installation operation and maintenance of this device should be gualified and follow the instructions of this User Guide We recommend that this product is not used for audience scanning When you connect to the main power supply the device will illuminate and the light effect will change with music when in sound activated mode 4 Caution To prevent Mortal Electrical Risk and Long Life Operation For your safety please kindly pay attention to all of the warnings listed below m Always plug in the power plug last and disconnect from the mains when the device is not in use or before cleaning a Do not install and operate the device in rain or extreme heat moisture or dusty environments E This device is for indoor use only and in a dry environment E Do not switch on immediately but wait until it reaches to room temperature if the device has been exposed to drastic temperature fluctuations Do not shake the device and avoid brute force when installing or operating
5. qtxlight USER MANUAL LUX LD30W LED MOVING HEAD t wg ti 150 447UK User Manual LUX LD30W 150 447UK LUX LD30W LED MOVING HEAD For indoor use only 6 Caution Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty 1 General Introduction With a powerful 30W white LED this moving head hasthe eguivalent light output of a 150W halogen bulb yet uses approx 20 of the power It is has 5 modes of operation including 2 auto 2 sound to light and DMX512 The light also features an 8 colour wheel and a choice of 7 different gobos that can be auto rotated to create a variety of effects Each shape or pattern can also be strobed via DMX or as part of the internal programs Perfect for installations in bars nightclubs stage shows and concerts Features Very high power 30W white LED 50 000 hrs 8 selectable colours 7 selectable gobos E E E a More vivid colours than equivalent halogen fixtures E Manual focus adjustment to sharpen the image and spot over a large distance E DMX in out connections via 3 pin XLR E 10 channel DMX colour select gobo select rotation strobe pan tilt pan and tilt speed pan fine tilt fine and reset Master and slave modes Strobe speed adjustable Auto sound activated Fan cooled Lightweight high quality casing with special coating for extra protection 2 Package Contents Please check the contents to ensure that th
6. xture will be exposed to rain high humidity extreme temperatures changes or restricted ventilation qtxlight i User Manual LUX LD30W 150 447UK 11 Layout for the LUX LD 30W MANUAL FOCUS DMX OUT DMX IN SWITCH ON OFF POWER FUSE ENTER DMX 512 ESC up DOWN qtxlight gt User Manual LUX LD30W 12 Digital Display Setting 8 Function Use the lt MODE ESC gt button to scroll through these menu items gtx light 150 447UK Use the lt UP gt lt DOWN gt and lt ENTER gt buttons to scroll through these menu items DMXMODE AUTO RUNNING SLOW AUTO RUNNING FAST SOUND ACTIVITY OFF SOUND ACTIVITY ON PAN DIRECT PAN INVERT TILT DIRECT TILTINVERT DISPLAY DISPLAY INVERT ON FACTORY DEFAULT OFF FACTORY DEFAULT ON RESET User Manual LUX LD30W 13 DMX Controlling Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Channel 8 Channel 9 Channel 10 14 Disposal Function amp Value Colour Gobo Wheel 7 Colour 000 017 White 018 033 Red 034 050 Yellow 051 067 Cyan 068 084 Green 085 101 Orange 102 107 Purple 108 127 Blue 128 192 Colour scroll clockwise fast to slow 193 255 Colour scroll anti clockwise slow to fast 6 Gobo wheel Spot 000 020 Spot 021 041 Gobo 1 042 062 Gobo 2 063 083 Gobo 3 084 104 Gobo 4 105 119 Gobo 5 120 127 Gobo 6 128 192 Gobo scroll clockwise fast slow 19
Download Pdf Manuals
Related Search