User's Manual - Crown Leisure
Contents
1. Mini Rider 2 m SE E User s Manual BEFORE USING THE PRODUCT PLEASE READ THE FOLLWING To ensure the safe installation and operation of the Mini Rider 2 please follow the instructions aimed at the users operators and the person in charge of the installation After careful reading and understanding the warning displays and cautions please operate Mini Rider 2 carefully It is important to keep the service manual with the product or in a convenient place for future reference Herein an explanation that requires special attention is enclosed with dual lines Depending on the potentially hazardous degrees the terms of DANGER WARNING CAUTION etc are used Try to understand the contents of the displays before the text Indicates that mishandling the Indicates that mishandling the product by disregarding this product by disregarding this pictograph will cause severe caution will cause a slight injury or death hazardous situation which can result in personal injury and or DANGER CAUTION material damage Indicates that mishandling the product by disregarding this warning will cause a potentially AN hazardous situation which can WARNING result in death or serious injury For safe usage of this product the following pictographs are used Indicates HANDLE WITH CARE In order to protect the human body and equipment this display is attached to places where the User Manual should be referred Indicates a2. Protective Earth Terminal Before operating the equipment make sure the equipment is connected to the Earth Terminal Ground Potential This step may be omitted for products in which a power cord with earth wire is used e Perform work in accordance with the instructions herein stated Instructions for the machine installation are explained by paying attention to the aspect of the accident prevention views Failing to perform work as per the instructions can cause accidents Only those who have technical expertise should perform the work to avoid hazardous situations the instructions herein state that the electrically and electronically qualified servicemen should perform such work on Mini Rider 2 which is designed to performed electromechanical functions on a 3 DOF platform 3 DOF 3 x Degree of Freedom e Mains Power must be switched OFF before working on the machine To prevent any electric shock please turn OFF the mains power before starting the maintenance work If the work is to be performed during the power on then the qualified service engineer should follow the detailed technical amp engineering Instructions from the Service Manual e Make sure the Earth Terminal is at the Ground Potential this is not required where a power cord is build with an earth wire This product is fitted with the Earth Terminal therefore please connect that to the indoor earth terminal by using the earth wire which will avoid any electri
3. The Electrical Power Consumption of Mini Rider 2 1 Start up current Start up Peak Current 19 8 amp 5 K Watts 2 Running current 10amp 3 Single phase supply voltage 200 240 volts SIMULINE INC MIND YOUR HEAD MOTION SIMULATOR DO NOT LEAN OVER THE WHILE OPERATING 8 SIMULINE INC 2 INSTALLATION LOCATION CAUTIONS The product is intended for indoor use Therefore do not install it outdoors Even when installed indoors the following locations should be avoided They may cause a fire electric shock or breakdown Places with raindrops or water leakage or places with high humidity amp WARNING damp such as indoor swimming pools or showers Places that have a high temperature such as places with direct sunlight or close to heating sources Places near flammable gas explosive chemical or dangerous substances Places that are dusty Places with an incline Places with intense vibration Places near anti disaster facilities such as emergency exit or fire extinguisher Any other place outside of the allowable temperature range ambient temp of 50 300 9 SIMULINE INC RESTRICTIONS FOR USE Check your electric specifications Check whether the product conforms to the voltage current and frequency provided at the installation location For the electric specifications see the plate label attached on the product WARNING If electric source outs
4. 40C3 DOC3 Over voltage protection error 1 Check to see if the output voltage of the Main Transformer 220R 220T stays within the range of 210V 230V 2 Check the input power source Check if there s a possibility of Temporary voltage over 240V 3 1 2 checks out and particular motor drive BD repeats the same error contact service representative listed in this manual and replace the applied BD 58 SIMULINE INC
5. Caster Set lt Fig 9 Precaution of transport gt 10 Description of Safety devices 43 SIMULINE INC NO Name of Item Image Location Description Area Sensor The bottom of Pillar Frame 5 pcs If the sensor detects an interruption of obstacles in the area it will stop motion and resume the motion after the obstacles are removed Emergency Stop Button Inside the cabin Pressing this button will stop the motion at any time during a ride The cabin will be moved into the standby position Door Sensor On the door It detects door open In case the door opens it stops the cabin s motion and resume the motion 3 seconds after the door is re closed Cabin Sensor Outside the cabin 2 pcs Detecting this sensor will stop the motion After the obstacles are removed it will resume the motion after 3 seconds This will keep passenger s legs inside the cabin 54 Seatbelt Inside the cabin The seatbelt contains sensor which detects whether it is fastened or not The ride will not start if the belt is not fastened and will stop the motion if the belt is unfastened during a ride In such a case the ride will resume 3 seconds after the belt is fastened again 65 Safety fence Around the cabin It maintains an appropriate distance between the waiting guest and the moving cabin It also discourages the guests from unnecessarily sto
6. MCU gt Item Description 1 Coin chute Tower Coin Selector Coin Vault Cash box 2 System Control PC Computer that controls the hardware and everything that operates the machine 3 Transformer Adjusts the voltage according to the country Only used to stop the machine even when the Emergency stop button is pressed and doesn t work When pressed the power to the MCU and the Actuators Cabin 4 Power Cutoff Switch stops at the last position and comes down to power off position slowly Do not force the cabin to come down faster Warning DO NOT PRESS THIS BUTTON EXCEPT FOR EMERGENCY 5 System OFF When pressed for 2 sec cabin will come down to the initial position y and the power to MCU is cut off System control PC will shut down 6 Power Cable Main Power cable 7 Main Power Switch When pushed to ON position system starts up Initialization will be processed Cabin moves up to boarding position 5 5 O P Panel O P Panel is located inside the Coin chute Tower of the SCU Item Description SVC 8 Service Inputs the credit Used to update the operating software or to do service works Also used to diagnose conditions of the System Control Computer To 9 TEST Mode button use this mode press and hold the button while turning on the system This button will not work while in operation CAUTION Only the certified service man shall use this mode 10 F VOL
7. to the arm frame 29 SIMULINE INC Bearing Arm shaft support bracket lt Fig 8 6c gt Tighten the bolts after lining up the holes Use Locktite 242 Hex bolt 4 Black M16x50 Spring amp Flat Washers Used lt Fig 8 6d gt 7 Attaching the actuators to the X frame There are total of 3 actuators The one with belt drive system is the 1 actuator and the rest are 2 and 3 30 SIMULINE INC 1 actuator 2 3 actuator lt Fig 8 7a gt With one technician holding an actuator in place and the other moves the bracket so that the actuator hangs from the X frame Line up the mounting holes and secure the actuator with supplied bolts Hex bolt 12 Black M10x35 Spring amp Flat Washers Used lt Fig 8 7c gt Make sure the motor is facing outside when installing 1 actuator Mount the actuators so the cables are facing outward when installing 2 and 3 Actuators 31 SIMULINE INC lt Fig 8 7d gt 8 Attaching the Cabin O First remove the door support frame O Lift the Arm frame O Tip Use a ratchet rope or similar equipment to hold it up O Secure the actuators so that they do not interfere with the cabin lt Fig 8 8a gt O After removing the cabin from the pack
8. Front speaker volume R VOL Rear speaker volume 20 SIMULINE INC 6 Accessory Part Number SCU Key 2 Coin chute Tower Key 2 Manual 1 7 Installing the Fence e Mini Rider is a motion simulator Rectangular fence must be installed before operating CAUTION m Install the door at the entrance Size 2300mm x 3000mm x 1000mm 21 SIMULINE INC Fence is equipped with strong PC polycarbonate screen to keep Material Installation the gallery away from the moving cabin Fence must be securely fastened to the main frame with supplied bolts Ex 8 Installation Assembly Always follow the instructions in this manual Not following this manual fully may cause electric shocks or other accidents This product has a complex structures and equipments Misses in assembly may WARNING cause electric shock or damages to the machine and cannot guarantee normal operation in those cases Make sure there are a crew of 4 or more is available for installation One technician cannot assemble this machine If one person carries out the installation accidents or damages to the machine may occur Make sure all of the connectors are connected to the proper positions firmly Insecure connections may cause malfunctions or electric shocks Make sure that none of the cables and harnesses are da
9. OF MONITOR Before handling the monitor read the following instructions carefully and follow the cautions below Indicates important information Indicates important information that if that if ignored may result in the AN ignored may result in the mishandling mishandling of the product and of the product and the possibility of WARNING the possibility of personal injury or Caution Personal injury and or may result in death equipment damage Indicates a particular location of Indicates that the power connector or the product that is not to be Z the power plug needs to be touched disconnected Be sure to unplug the power cord first when installing uninstalling the monitor or disconnecting any external connector connected to the monitor or the internal K d parts of the monitor Working with the power on may result in electrical shock or Kam other accidents Do not modify the monitor without permission The company is not responsible for any trouble or accidents caused by unauthorized modifications Primary side and Secondary side The monitor circuit is divided into the primary and secondary sides which are electrically insulated Do not touch the primary side or both the primary and secondary sides simultaneously Doing so may result in electric shock When adjusting the device use a non conductive screwdriver and do not touch any other parts except for the handle Do not short circuit the primary and secondary sides It may cause
10. Specification Before installing the product check for Electrical Specifications Simuline products have a nameplate on which Electrical Specifications are described Ensure that the product is compatible with the power supply AC voltage and with the AC frequency requirements of the location Using any Electrical Specifications different from the designated Specifications can cause a fire or an electric shock and this will void the manufacturers Warranty e Install and operate the product in places where appropriate lighting is available allowing warning labels to be clearly visible and understanding To ensure safety of the customers labels and printed instructions describing potentially hazardous situation are applied to places where accidents can be caused Make sure where MR 2 is operated has sufficient lighting allowing the warning labels are to be visible and read If any labels have been peeled off please apply them again immediately It is important to place an order for warning labels etc with the machine supplier or with the nearest MR 2 distributor e Servicing the Game Display Monitor Display monitor TV parts are subject to EHT Extra High Tension Voltage Even when the Power is OFF some of the components are still accumulating voltage until the highly charged capacitors are fully discharged Therefore only a Monitor Service Engineer should perform the repairs and parts replacement failing these procedures will void the man
11. an electric shock or malfunction High Voltage Since the monitor contains parts that generate voltages higher than 20 000 volts do not touch the inside If a piece of metal or paper is falls into the monitor immediately turn the power off Failure to do so may result in a malfunction or a fire 14 2 ADJUSTING MONITOR e Since the monitor is fully adjusted when it is delivered any other adjustments are unnecessary Handling the monitor which contains high voltage components is very dangerous In addition a wrong adjustment may cause breakdown due to a bad screen or unfixed synchronization e Monitor projector should be appropriately adjusted If a defect such as flashing is detected on the screen do not leave it without adjustment An Inappropriately adjusted screen may cause dizziness headache or other physical injury to customers Do not touch any unspecified parts Failure to comply can result in electric shock or short circuit 49 SIMULINE INC Check the position of the monitor controller It is located at the left of the monitor Monitor Controller ey 2 A wei a BRIGHTNESS ADJUST SCREEN BRIGHTNESS CONTRAST ADJUST SCREEN CONTRAST m SHARPNESS ADJUST SCREEN SHARPNESS a H POSITION ADJUST HORIZONTAL POSITION a V POSITION ADJUST VERTICAL PO
12. control computer will shut off O Turn off the Mains input switch at the rear of SCU 47 SIMULINE INC 13 3 Emergency Situation There are two ways to stop the operation for safety reasons One is Emergency Stop Button and the other is Power Cutoff Switch In case the Emergency Stop button does not work stop the operation by pressing the Power Cutoff switch located at the rear of SCU Be sure to stop the operation by pressing EMERGENCY STOP BUTTON and in case of failure with this button use POWER CUTOFF SWITCH Fo m EMERGENCY STOP BUTTON Press this button in case of the following emergency situations during a de Passenger looks uncomfortable In case of any abnormality of the motion In case any abnormality situation in the environment occurs and press this button will make the cabin move into the initial boarding position and display of the monitor will return to attract mode screen m POWER CUTOFF SWITCH In normal operation press the Emergency Stop button if any emergency situation occurs Power Cutoff switch should be used in case the Emergency Stop button does not work within 5 10 seconds even after the button is pressed Do not press POWER CUT OFF BUTTON if anyone or any article is below the cabin The cabin will slowly move down and can injure or damage any person or WARNING article under the cabin 48 SIMULINE INC 14 MONITOR 14 1 HANDLING CAUTION
13. the manufacturer will not be responsible for any damages and liability In case the product cannot fit through the entrance of a location do not disassemble without proper preparations Disassemble only the parts as specified in this manual Do not attempt a disassembly procedure not described in this manual Special tools and adjustment procedures are required to disassemble assemble much of the mechanical parts of the product Improper disassemble assemble can lead to accidents such as electrical shock and human injury If the product does not fit through the entrance even after the disassembly specified in this manual then contact the manufacturer or the distributor of the product or the contact provided in this manual Do not tilt the product or subassemblies in an attempt to pass through small entrances This can cause accidents during the transportation In addition it can cause damage or deformation to parts and result in accidents during operation To fit the product in a location the size of the entrance should be at least 1300mm wide and 1550mm high IMPORTANT 11 SIMULINE INC 3 CAUTIONS OPERATION For safe operation please obey the following warnings and instructions CAUTIONS OPERATION Check the following cautions before working hours to prevent accidents e To prevent any player or other customers from headache or dizziness the product should be installed in a well lighted place so that
14. the product and disconnect the power cord Then call your machine distributor or the contact point listed in this manual If the product is operated abnormally serious accidents such as electric shock fire collision WARNING can occur e For the proper maintenance of the motion system please call the contact point listed in this manual If improperly trained personnel perform the maintenance work it is possible that accidents can occur during the maintenance work and that can cause accidents to customers and players This will void the manufacturers Warranty e To help prevent accidents make sure to install the auxiliary fence and ensure that the product operates properly within the fenced area Failure to secure sufficient floor space with the fence can result in accidents due to collision and contact between players and objects CAUTION e Make sure there is no damage to surfaces that the player touches during play Such damaged surfaces can cause cuts and injury CAUTIONS OPERATION PLAYER CONDITIONS To prevent accidents and or unnecessary problems alert players or customers to be aware of the following 13 SIMULINE INC WARNING WARNING e Anyone who falls into one or more of the following categories should be prevented from playing the game It may cause an accident or injuries Persons who need assistance when walking and persons with high blood pressure or heart disease Persons who ha
15. warning signs are clearly visible Improper lighting can cause unexpected problems such as WARNING contact between customers collision and other undesirable situations e Adjust the monitor appropriately If monitor blinking is detected do not leave it un adjusted Inappropriate monitor adjustment can cause dizziness or headache to players e Prepare a resting facility for players to take a rest in case he she needs to rest due to conditions such as motion sickness e Check whether the level adjusters are securely set to the ground If not the product is not properly set and can result in an accident Do not place any heavy article on the product It can cause an accident if dropped and can also damage components Do not climb on the product Accident can be caused from falling If it is necessary to check the top of the product use a stepladder Check whether any doors or cover sections are damaged or separated It can cause electric shock Do not place the following articles on or inside the control panel on top of the seat on the top of the product or in the vicinity of the product Doing so may cause short circuit electric shock or damages to machine parts Vases pots cups water containers cosmetics and containers full with chemicals water bottles soft drink cans take away food packages etc e Check the surroundings before turning the product on Once it is turned on the product is automatically initialized If any per
16. Assemble the Pillar frame and lower support frame 5 Assemble the Pillar frame and X frame actuator support frame 6 Assemble the Pillar frame and Arm frame 7 Connect Actuators to the X frame 8 Assemble the Cabin 9 Assemble the MCU support bracket 10 Assemble the Side Fence 11 Assemble the Door Fence and Door box 12 Assemble the Area Sensor and Sensor Setting 13 Fasten SCU 14 Assemble Top Sign Board 15 Assemble the ramp O Install the Casters Option 1 Line up all the parts 2 Settle the Pillar frame in position O Be sure to leave at least 2m of room in front of the door to provide enough room for traffic O 1 Pillar frame has a cable duct inside 0 3 and 4 has holes for Arm bearing bracket 23 SIMULINE INC lt Fig 8 2a gt 3 Assemble the Pillar frame to support frame O Support frame has 4 tap holes for Top signboard lt Fig 8 3a gt 2 Support frame has 4 tap holes for Top sign board lt Fig 8 3b gt Alittle twist and push may be needed to line up the Bolt holes Use Locktite 242 or a product of same performance to fasten the bolts Caution When a pillar frame is standing alone it may tip over One should always hold the frame upright when others are tightening the bolts 24 SIMULINE INC Hex bolt 8 Black M10x25 Spring amp Flat Washers Used lt Fig 8 3c gt Top Support frame is assembled in
17. SITION m PHASE ADJUST SCREEN CLOCK PHASE m FREQUENCY ADJUST SCREEN FREQUENCY 50 SIMULINE INC 15 Area Sensor Carry out the following procedure in case the area sensor does not work properly The LEDs on the sensor indicates the status Area Sensor consists of Reflector and Sensor If the adjustment is needed adjust the sensors located as shown in the figure below lt Fig 15a gt Slightly loosen the truss bolt to adjust the sensor The sensor is adjusted by 0 0 Truss bolt 8 Black M3x12 W Spring amp Flat Washers Used lt Fig 15b gt O The sensor is adjusted by pointing the sensor in the direction of the centre of reflector In this case you can put a white paper in between the sensor and reflector to see if the beam is aligned correctly O If yellow LED lights up or turned off verify that nothing is obstructed between the area sensor and reflector and then perform the adjustment again 51 SIMULINE INC 16 Grease Up e Be sure to use the designated grease Using undesignated grease can cause parts damage e Do not apply grease to locations other than as specified Doing so may create a risk of operational problems and deterioration of parts e The designated periods for greasing serve only as a guide Whenever there are squeaks or other anomalies apply grease at designated locations Grease UP is required to maintain normal lubricate levels at high low temperatures and to en
18. age check for any signs of damage to the cabin FRP Check for any loose bolts and screws Check if any of the cables are missing Using a pallet truck move the cabin in to the frame so that the cabin is placed right below the X frame O Line up the mounting holes of the middle universal joint and the holes on the cabin Line up the holes for the actuators and the according holes on the cabin Tighten the bolts Hex bolt 4 Black M12x35 Spring Washer Used 32 SIMULINE INC RW h Hex bolt 4 Black M10x35 Spring Washer Used lt Fig 8 8b gt 9 MCU Support Bracket O Mount the MCU Support Bracket on the already mounted floating bolts on the X frame There are also floating bolts on the on the upper Support frame Tighten both sides Hex bolt 2 Black M6x20 Spring amp Flat Washers Used MCU fasten block Vibration bolt Remove before installing the MCU and install lt Fig 8 9a MCU Support Bracket gt NUT 2 Black NUT 2 Black M6 Nut Flat Washer Used M6 Nut Flat Washer Used lt Fig 8 9b gt 0 After installing MCU Support Bracket place the MCU box and push it until it is stopped by the stopper Install the Fasten blocks that were once uninstalled Stopper 33 SIMULINE INC Fasten block lt Fig 8 9c gt O Except for the fence on the door side place the other fences at the corresponding positions O Re insta
19. and this may cause an accidents m Do not switch on and off continuously When you turn off the machine wait at least 1 min before you switch it on again If not Digital Motion controller may be damaged m 220V DC power is flowing through out the cabin Servicemen should be certified engineers Do not disassemble without Simuline s consent m MCU and SCU may not be disassembled by an unauthorized personnel kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk 13 SYSTEM ON 13 1 System ON POWER ON 1 Turn on the mains input power switch at the rear side of SCU ensuring that 230 single phase power is connected 1 System will boot up In normal manner it will take about 3 4 minutes The cabin monitor will show boot up process and when it finished control program will be executed When the system control program executed apply the power to the MCU motion control unit and then make the cabin move into the initial position When the monitor displays attract mode a start up process is done and it is ready for a ride gt INSERT cdims d lt Attract Mode gt 13 2 System OFF Power OFF Powering off should be followed as described in the manual Li Press and hold the System Off button for 2 seconds at the rear of the SCU Pressing this button will make the cabin move into initial boarding position and then cut the power to the MCU by making the breaker off sound Then the
20. ang on the cabin behind the seat This can cause serious injury due to falling jamming of body parts between structures and turnover of the product If anyone is found hanging on to the cabin make sure the person gets off immediately 14 SIMULINE INC e Make sure the game is not played with a child sitting on the players lap Serious injury can result due to the child being jammed between the player and the control panel or the child falling from the moving cabin Nobody except the players should approach the product during play Injury WARNING resulting from collision and contact with moving parts can occur The safety sensor senses foreign substances on top of the base only In particular since small children cannot anticipate the potential danger make sure that they are properly attended to near the product Ensure that player s feet are always inside the cabin and on the pedals Feet that are carelessly hung out or protruded from the cabin can be caught due to cabin motion and serious injury such as fracturing can occur Prevent potential accidents or problems by disallowing play with bags mufflers and other items strapped on the players necks entering the cabin with drinks and other player actions that are potentially dangerous e H any abnormal or dangerous situation with the player is observed stop the motion of the product by pressing the Motion Stop button e Do not handle the product recklessly such a
21. c shock After performing repair of the Control equipment ensure that the Earth Wire is firmly connected and measure the Earth Bond Resistance with your test meter and the readings must be recoreded 1 SIMULINE INC e It is important that the Power Supply used is fitted with an Earth Leakage Breaker Mini Rider 2 MR 2 does not incorporate the Earth Leakage Breaker e Please use 20 Ampere D ee MCB which will handle the SE current Ka up Current Using standard fuses exceeding the specified rating can cause a fire and electric shock e Specification changes by third party developers are NOT Allowed Re locating of the machinery parts with in MR 2 and carry out Conversions Modifications of MR 2 with out the consent of Simuline are also not allowed All the moving and static parts of the MR 2 include warning labels for safety and designed related covers for personal protection etc It is very hazardous to operate the MR 2 by removing parts and or modifying the circuits Should doors lids and protective parts being damaged or lost refrain from operating the product and contact your MR 2 supplier or the nearest distributor immediately Simuline shall not be held responsible for any accidents compensation or damages to any third party resulting from the specifications changes not designated by Simuline This will also void the manufacturers Warranty e Ensure that the product meets the requirements of appropriate Electrical
22. duct was originally purchased to perform routine maintenance on moving mechanisms Failure to perform maintenance can lead to accidents e There is the danger of accidents involving electrical shorts circuits or fire caused by factors such as the deterioration of insulation in electrical and electronic Equipment over the time Check that there are no abnormalities such as odors from burning rubber etc e Authorized personnel must perform maintenance works Be sure to follow the instructions in this manual Maintenance works must be performed after the breaker must be turned off Performing works with applied power may result in abrupt operation of the product or cause electric shock to the body In order to maintain the performance of this product and operate it safely inspect the following items routinely and perform maintenance The player directly touches and manipulates the select button with his her hands Clean these buttons as necessary and provide hand towels etc so that players will be comfortable while riding PERIODIC INSPECTION TABLE ITEMS DESCRIPTION PERIOD Outer frame Confirm that the adjuster is level to the ground Daily Inside Cabinet Cleaning Daily Monitor Check screen adjustment SE GA Coin elector Coin nsarton tet etd Electronic parts Inspection As appropriate Power cables Inspection cleaning 3 months Cabinet Cleaning Monthly Cabin Surface Cleaning As appropriate Moving mecha
23. e carefully to line up the bolt holes Tip Pillar frame may need to be pushed or twisted to line up the bolt holes SET HH AL E _ SS q1 gt ced 3 gt lt Fig 8 5d gt When the boltholes are lined up use plate washers to assemble the X frame for temporarily 28 SIMULINE INC Plate washer Hex bolt 8 Black M10x35 Going amp Flat Washers Used lt Fig 8 5e gt When all the bolts are in position temporarily tighten the bolts at the Upper support frames first Tighten the bolts in the following order Upper support frame gt Lower support frame gt X frame bracket gt X frame bracket and Pillar frame 6 Pillar frame and Arm frame O Make sure the set screws on the Arm frame are securely tightened if not bearings may move out of their positions lt Fig 8 6a Bearings on the Arm frame gt O Prepare Arm shaft support bracket Q 2 x technicians hold the arm frame straight up with the bearings on the top 0 1 x technician places the bearing lining up with the mounting holes O before tightening the bolts place the Arm shaft support bracket between the bearings and the frame O Ref When the Bearing is not already attached to the Arm frame refer to Fig 8 6a and attach the bearing
24. eid Ee E 19 8 INSTALLATION ASSEMBLY ee aeaa a aa eee Gnd el ae ee aaa i aa aai 20 9 PRECAUTION OF MOVING SYSTEM AT THE LOCATION sasssssssssssnnsnuenunnnnnnnnunnnnnnnnnnnnnnnnnnnnn nunnan 40 10 DESCRIPTION OF SAFETY DEVICES oie es seesecensesecceeseeeeeeeseneesaeenaeenceseaeesaeeseeeesaeeeeeeeeeneneeeees 41 11 DESCRIPTION OF RIDES estate edd NEE eege EE EEN Gees 42 12 RIDE OPERATION INSTRUCTION 0 cccccsseeeeseeeessesenseeeeeseeseeneeeeeesesesneeensseeessaesnseeeeseseaaennenensaes 43 13 SYSTEM el WEE 44 13 1 System On POWER OND eegener 44 13 2 System Off Power OFF sheis aiana Eeer ege 44 L s Emeroenew Zatuebogt eet toena oeren napaa eona amene Eege 45 4 d Lei e Le 46 15 AGA TE 48 UE AT EE 49 16 1 Actuator Grease Up ek ERNEAEEEEEEEE haves sees loves dE D ENEN SEO SEN E 50 16 2 UNIVERSAL JOINT IN THE ACTUATOR ccccccsseseeeeceeesesseceeeeesetaeeneeeeeeseetseneetnesans 50 16 3 Grease Up of Middle Joint ou ccc cccscesceseeeeeeeseeseeeeceesaeseeeesaeeaeeeeseeeeeesnenseneenaeees 51 be EU 52 17 1 PERIODIC INSPECTION ccccsccssecesessecssceseeseceseesaeestecseeseeesaeseeesaesaeeneesseeseesaessnseaseas 52 BN el CIR SH ele le ul Le 54 18 1 TROUBLESHOOTING TABLE AA 54 13 2 MGU ERROR ees EERSTEN tensianietecexs 54 4 SIMULINE INC 1 HANDLING CAUTIONS When installing maintaining or handling the product the following cautions should be observed in order to enjoy the game safely Failu
25. erational contact the service representative listed in this manual Confirm that the door is closed Close the door Area sensor is interrupted Remove the obstacles Cabinet YELLOW LED OFF YELLOW LED ON does not operate Sensor is not aligned Align the sensors Failure Turn off all the powers in the sequence of Malfunction of system to power off Emergency Stop 18 2 MCU Error Next is a list of Error Codes regarding the Motion Control Board Malfunction Please check the error codes when an error occurs MCU Error Message Error Code Cause Countermeasures Check the Encoder Connector Encoder connector at the Check the connection of encoder connector at FFOO Motor Drive Board is the Motor Drive Unplugged J11 Board and MCU Check for any damages J11 Check 5V SMPS output 1 Check the voltage between GND and 5V Motor Drive Board did not is within the range of DC5 0V 5 2V RIDE receive signal from encoder 2 If 1 Checks out OK and the problem After the power is switched on repeats contact the service representative listed in this manual Check if the power unit Motor Drive Board Motor Drive Board K5 K8 input power SMPS F800 12V relay at the input power 12V is normal e Is di ted If SMPS 12V power is normal check the ARTOSE Motor Drive BD J7 Connector 12V power with a tester When 57 SIMULINE INC the 12V power is not available check the connec
26. hance the durability of the product Neglecting periodic Greasing will shorten the life span of the product and may cause strange noises or vibrations The actuators and the Middle Joint of Mini Rider 2 must be greased The product should be greased Twice every year or depending on the operation of the Mini Rider 2 Designated Grease KLUBER HIMONAX WS433 Middle Joint lt A Gees lt Fig 16a gt 52 SIMULINE INC 16 1 Actuator Grease Up O Remove the bellows of the Actuator O Use the Grease Gun to apply 60g to the Grease Nipple of the actuator TOP and 30g to the Bottom part lt Actuator Top gt lt Actuator Bottom gt O Wipe off excess grease Q Replace the bellows cover into the original position 16 2 UNIVERSAL JOINT IN THE ACTUATOR O Remove the bellows cover O Apply 5g of Grease to the top and bottom of the Universal Joint in the actuator lt Universal Joint gt Q Wipe off excess grease 0 Replace the bellows cover into the original position 53 SIMULINE INC 16 3 Grease Up of Middle Joint lt Middle Joint gt O Apply about 5g of grease to Middle Joint Q Wipe off excess grease 54 SIMULINE INC 17 Maintenance 17 1 PERIODIC INSPECTION Once a year check to see if power cords are damaged the plug is securely Inserted e Once a year request the dealer from whom the pro
27. ide of the specification is used it can cause a fire or electric shock Inside the installation location a breaker and an earth connection for the product are required An independent electric source for the product should be provided to prevent fire or electric shock Make sure to use the power cable in accordance with power consumption as described below Using power cable of other electric specifications can cause a fire or electric shock Make sure to use the power with independent circuit breaker Using any power source without circuit breaker can cause a fire Do not have many electrical cords connected to a single socket Overload can cause the generation of heat or a fire If an extension cord is used it should be rated the max current or higher as described below Using a cord of different specifications can cause a fire or electric shock Please refer to page 7 D type MCB information and The Electrical Power Consumption of Mini Rider 2 10 SIMULINE INC OPERATIONAL FLOOR AREA For proper operation a floor area of 3700mm X 2500mm or more is required In case of interference with the motion of the cabin Ventilation area specified in this manual should be secured In addition obstacles should not block ventilation vents and ports Blocked ventilation WARNING may cause the generation of heat or a fire In case any accident occurs while the product is operated on a floor area less than specified
28. ll the Door Support Frame Attach the Fence bracket on the Pillar Tramen Fence temporarily Line up the bolt holes on the Lower Support Frame and fasten the bolts 0 O Attach the fence to the Pillar frame 10 Side Fence lt Fig 8 10a Fence bracket gt 10b gt lt Fig 8 SIMULINE INC 34 Hex bolt 4 Black M amp x25 Snrina amp Flat Washers leed Truss screw 4 Black M5x12 lt Fig 8 10c gt O After installing the Fence attach the fence protector to the 1 fence back of the cabin lt Fig 8 10d Fence protector gt x O amp a a E fe a x bp x M6x25 Spring amp Flat Washers Used lt Fig 8 10e Fence protector gt 11 Door Fence and Door box O Attach M10 Leveler to the door fence SIMULINE INC 35 Leveler M10 lt Fig 8 11a Door Fence gt O Attach the Fence bracket on the Door Fence Attach the fence to the pillar frame Hex bolt 4 Black M8x25 Spring amp Flat Washers Used Hex bolt 4 Black M8x25 D amp Flat Washers Used ee E AL 0 P Hex bolt 4 Black M10x25 Spring amp Flat Washers Used Hex bolt 3 Black _ M8x25 Boe amp Flat Washers Used lt Fig 8 11b Door Fence gt O Place a bracket between Fence and Door support frame and attach the Door b
29. maged during installation Damaged cables and harnesses can cause electric shocks or short circuit The manager of the store or the service manager must carry out this installation If unqualified personnel install this machine accidents may occur Also if the installation instructions in this manual are not followed fully severe accidents may occur to both of the passengers and workers Make sure that the required space is available for the installation The space required for the installation is noted in this manual Insufficient installation space may cause accidents during installation Slanted floor gaps elevation difference must be avoided for installation Cabin or frames may tip over and causes sever accidents Do not expose the power cable earth line and etc where people might walk over them Damaged cables may cause electric shocks or short circuits Use cable floor molds to protect them Do not cover the vent at SCU It may cause overheating and possibly fire Make sure there are at least 2m of room in front of the door for traffic 22 SIMULINE INC Use caution while working with molded parts Too much pressure can damage the parts This may cause injuries Be careful when working with doors to avoid head injuries CAUTION j l Follow the below order when installing the product 1 Line up all the parts 2 Settle the Pillar frame in position 3 Assemble the Pillar frame and upper support frame 4
30. nics Maintenance Grease up 1 year 1 year 55 SIMULINE INC Safety equipment Seatbelt Motion Stop button Area Sensor Cabin Sensor Door sensor Safety fence Daily Daily Daily Daily Daily Daily Cleaning the Cabinet surface When the cabinet surfaces become dirty remove stains with a soft cloth soaked in water or diluted with water chemical detergent and then dry area ASAP To avoid damaging to the surface do not use such solvents as thinner benzene etc or abrasives bleaching agent and chemical dust cloth Some general purpose household kitchen and furniture cleaning products may contain strong solvents that degrade plastic parts coatings and print Before using any cleaning product read the products cautionary notes carefully and test the product first on a small area that is not highly visible 56 SIMULINE INC 18 Troubleshooting 18 1 Troubleshooting table problems Cause countermeasure Circuit breaker of the AC unit is no in operation Connect the AC 230V Failure Plugs are not connected Plug the 230V to the cabinet in outlet of power on Mains switch of the SCU is off Turn on the mains input switch Follow the emergency stop sequence by System Check the ener messag jan the Beie turning off the power Wait for about 1 minute is 9 and switch on again If it does not work message i SEH eech not op
31. nual jockey O Lower the caster of the Caster Set e e K 7 bh lt Fig 2 gt O Put the fixation bolt in the fixation hole of the Caster Set and then tighten with nut 41 SIMULINE INC Nut Black M8 Hex bolt 1 Black M8x140 Spring amp Flat Washers Used lt Fig 3 gt O Release the pressure jockey to lower the Pillar frame So the Casters are grounded lt Fig 4 Position of Caster Set gt 9 Precaution of moving system at the location 42 SIMULINE INC The system consists of precision machinery and electronics Be sure to handle with care Please pay attention to make the product level to the ground or loading container Failure to heed this precaution may result in the mishandling of the product and cause faulty operation or damage to the product Please follow the below precautions at the site If ignored this will cause the parts damage or damage to the floor s Transport the product on a flat floor s On a slant area with 1cm or more use a ramp s Transport the product at a speed of less than 2km h Do not tilt too much Be careful not to apply the load to only one side
32. of the seat before boarding the other Be sure that both of the passengers do not exceed 240kg Caution When children are boarding make sure the child is on the right side of the seat 3 Fasten the seat belt and make sure the belts are secure after boarding Caution The machine will not run if the seat belts are not secured 4 Insert Coin s will show up on the screen Ride start screen ba INSERT Suen d lt Ride start screen gt 5 Insert coins 6 At the ride selection screen choose one movie from 4 of the movies You can do this by pressing the selection buttons bellow the display lt Ride selection screen gt lt Select button gt 7 Each film is about 4minutes long 8 When the film is finished ride start screen will show up and the cabin will move to the initial position When the cabin stops and the massage on the screen show up you may un fasten the seat belt and get off the ride Caution Do not un fasten the seat belt until the cabin is at the initial position 4 System Operation 46 SIMULINE INC Please take your time to read this massage kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk Warning m Please turn on and turn off individually Never cut off the power by switching off the breaker Follow this manual at all time m When cutting the power off to the MCU make sure no one is on board the machine It may drop suddenly
33. ox Top cover Box Bracket Leveler lt Fig 8 11c Door System Box gt Li Attach the levelers to the door box before installing Adjust the height after installing the door Tighten the bolts on the side first Tighten the bolts on the top at the last Hex bolt 2 Black M8x25 Spring amp Flat Washers Used 36 SIMULINE INC Hex bolt 2 Black M8x25 Spring amp Flat Washers Used lt Fig 8 11d gt L Insert the door shaft to the shaft hole in the Door box O Line up the door hinge cap to the shaft and tighten with M6 wrench bolt Wrench bolt 4 Black M6x15 Flat Washer Used Door hinge CAP Door Shaft lt Fig 8 11e gt O Attach the Gas spring re assembled to the door box O Do this with the door closed all the way 37 SIMULINE INC Wrench bolt 2 Black M5x15 Flat Washer Used Gas Spring Bracket lt Fig 8 11f gt O Close the Door Box Top Cover and secure it with M6 Truss bolt Truss bolt 3 Black M6x15 Door Box Top Cover lt Fig 8 11g gt O Adjust the height with levelers 12 Area Sensor amp Setting Sensors are pre installed If any of them should be removed refer to Ch 15 Area Sensor to re install 13 SCU 0 Line up the bolt holes on the SCU and the holes on the Pillar frame Nuts are fastened from inside of the SCU Caution SCU ma
34. ply voltage and frequency requirement meet with those of the location Are all wiring connectors correctly and securely connected Unless connected in the correct direction connector connections can not be made accurately Do not insert connectors forcibly The fuses used meet specified rating Is the Circuit Protector in an energized status Are all accessories available Can all Doors and Lids be opened with the Accessory keys Can Doors and Lids firmly close 3 SIMULINE INC TABLE OF CONTENTS BEFORE USING THE PRODUCT BE SURE TO READ THE FOLLOWING 1 HANDLING CAUTION geng enee eege EE ENEE 5 2 INSTALLATION LOCATION CAUTION 2c cccscceecceeseeeeeeeseeeneeeseee sence seeesaeesaaessaeesaeeseaeesaeeseeeseaeeneeeees 8 3 CAUTIONS OPERATION egugeegee Ehe EVERE a aoaaa aa aaa SEa a daaa raa naa datat adt 10 A SPECIFICATION ET 14 5 NAME OF THE PARTS irano a a dee eg 15 5 1 MAIN BODY c EE 15 5 2 SCU SYSTEM CONSOLE UNIT FRONT cccscecseeeeeceeeeeeseeeeeeeeeeeeesesesaeeesesenaeensaeesaeesseetes 16 5 3 SCU SYSTEM CONSOLE UNIT BACK 0 cececccecseceeeseeseeeeeneeeeeeseeseneessessensaeeeenaeeas 17 5 4 MCU MOTION CONTROL UNIT cecceseceeceeeseeseseeeseesaeeesneesaeeeseeesaesaeeeesaesaeeeesaeeeenesaeeae 17 5 3 0 P PANEL o weer E 18 6 ACCESSORY O e a a aaa a r aaa e a aaa l ei eet 19 7 INSTALLING THE FEN CE ee ee Adc a
35. pping the motion during a ride by approaching the cabin too closely 11 Description of Rides 44 SIMULINE INC m ABOUT THE RIDE Mini Rider 2 includes 4 rides and passenger can choose one ride from the rides Title Image Content Haunted_Mine Glacier Run d Glacier Run x D Hang on to your ten gallon hats as you plunge Headfirst into an old dilapidated gold mine that just happens to be haunted Inside this hotbed of mystery and suspense you ll come face to face with the mine s ghostly prospector who ll warn you not to venture further but your insatiable appetite for adventure will disagree Only your quick thinking and a little luck can get you out alive A white knuckle experience with dazzling imagery This nonstop action ride a cross between a bobsled and a roller coaster designed to make your senses erupt will take you to the frozen landscapes of the Arctic during the Northern Lights season Astro Canyon Cosmic Race 45 Hold on for a wild ride in a Grand Canyon like environment in outer space Fasten your seat belt and get ready for the race Futuristic race will surely give you the experience you d never had before SIMULINE INC 12 Ride Operation Instruction 1 Make sure the cabin is initialized before boarding 2 Make sure that one of the passengers is on the right side
36. re to follow the warnings listed below and in other parts of this manual may cause physical injuries or damage to the machine Before any installation or maintenance work make sure to turn off the power Failure to do so may cause an electric shock or short circuit In case it is necessary to keep the power on for a certain type of work the manual will explicitly state so WARNING Do not suddenly pull out or insert the power plug from into an outlet It may cause an electric shock or short circuit Do not attempt to touch any plug with wet hands It may cause an accident due to electric shock Power cables cords or grounding wires should not be exposed such as on a passage The exposure may cause physical injuries possibly resulting in short circuit or electric shock Do not place any article on power cables cords nor damage them for it may cause a fire or electric shock Do not pull on the power cables cords unnecessarily during or after installation Damaged cords may cause a fire or electric shock If any power cord is damaged ask the manufacturer supplier for a replacement power cord Using a damaged power cord can result a fire electric shock or electric current leakage Make sure to earth the product Incorrect grounding may also cause an electric shock Use the rated fuse only Using any fuse of incorrect rating may cause a fire or electric shock Firmly connect IC boards and all connectors completely Unstable connec
37. s by hitting or kicking it Such behavior can cause tumover of the product and material damage and may result in injuries e When getting on the cabin there is the danger of players tripping on the base and hitting his her head on steel structures of the product Please make sure players get on the product carefully Ensure that nobody except the player touches or activates the ride and other controls of the ride during play It can cause injury due to collision between persons or with moving parts of the product It can also cause trouble between the customers Please alert players not to place any articles or baggage on the base floor of the product If the floor beam sensor does not detect them for some reason and keeps operating the items can be dispersed and or projected and cause accidents to bystanders Before playing the game have the player adjust the seat suitable for his her individual physical size Playing the game in an unnatural position can cause unexpected accidents 15 SIMULINE INC 4 Specification m Diamentions 2300mm W x 3000mm L x 2450mm H m Weight approx 1200Kg m Power Single Phase 230 volts AC 11A during normal game operation m Power Consumption approx 3Kw during normal game operation m Monitor 42 m Weight Limit 240kg for two passengers 16 SIMULINE INC 5 Name of the parts 5 1 Main Body Tan cian hoard Cahin Pillar frame Area eener 9 Actiatar 2 Act
38. son is too near to the product during initialization possible collision can occur during the moving of the cabin For safe operation make sure to execute a trial operation after power is on Since the cabin moves the product is equipped with safety devices Please check whether these safety devices are working normally as follows Does the seat belt is fitted and secured by the player Does the seat belt is free of damages or excessive wear Does the motion stop automatically when the seat belt is loosened taken off Does the seat belt is attached securely without looseness Does the machine stop when the STOP button is pressed Does the machine stop when the front side beam sensors are tripped Does the machine stop when the floor beam sensor is tripped In addition to checking the safety devices make sure that the product moves normally Any abnormal motion can cause accidents Do not operate the product unless all abnormalities are resolved Does the machine move in sync with steering wheel operation Does the machine move smoothly e Does the machine move securely without looseness Is there any abnormal noise or sound when moving Is there any abnormal vibration when moving Does the product return to the initial standby position and stop when the game is completed 12 SIMULINE INC e H any abnormality in the motion system is suspected immediately stop all operations turn off
39. the order of 1 4 lt Fig 8 3d gt 4 Assemble the Pillar frame and lower Support frame Door support frame has 4 tap holes for Door box and Fence 25 SIMULINE INC lt Fig 8 4a gt Fence support frame has 5 tap holes for the Fence lt Fig 8 4b gt Push the SCU bracket under the Fence support frame SCU bracket lt Fig 8 4d SCU bracket gt After assembling 1 4 Fence support frame Assemble the Door support Frame Door support frame needs to be disassembled when installing the cabin Do not apply Locktite Pillars may need to be pushed and twisted to line up the bolt holes 26 SIMULINE INC Hex bolt 4 Black M10x25 Spring amp Flat Washers Used Door support frame lt Fig 8 4f gt 5 Pillar frame and X frame actuator support frame O Before installing the X frame on top of the Pillar frame prepare 8 plate washer and assembly bracket Plate washer Assembly bracket lt Fig 8 5a gt O Attach the bracket to the X frame KK Hex bolt 10 Black M8x25 Spring amp Flat Washers Used lt Fig 8 5b gt 27 SIMULINE INC Prepare 2 scaffolds and have 2 of the technicians on the top as shown 2 on the scaffolds lifts and 2 on the floor push up the X frame and put the X frame on the top of the pillar frames lt Fig 8 5c gt Move the X fram
40. tion harness FFFE Actuator Limit Sensor is not Responding 1 Check the connection installation of Actuator Limit Sensor 2 If 1 checks out OK and the particular Motor Drive BD repeats FFFE Error contact service representative listed in this manual and replace the applied BD 90AE 9086 Error at the 1 2 3 Actuators When the power is supplied Motor Encoder was supplied with power and the motor could not find the phase Information In result motor could not find Z pulse 1 This may happen when the machine was started in a slanted position Restart the system 2 Actuator Limit Sensor Bottom Sensor installation is not in order 8C3 Motor Drive BD IPM Error 1 Check the AC power to the Motor Drive BD stays in the range of AC200V AC230V 2 Check the operation of the fan at the Motor Drive BD Heat sink 3 1 2 checks out and particular motor drive BD repeats the same error contact service representative listed in this manual and replace the applied BD 10C3 90C3 Over current Protection Error 1 Check to see if the output voltage of the Main Transformer 220R 220T stays within the range of 210V 230V 2 Insufficient Actuator lubing may cause this error Check the Actuator for lubing and apply lubing when needed 3 1 2 checks out and particular motor drive BD repeats the same error contact service representative listed in this manual and replace the applied BD
41. tions may cause an electric fire Do not make any unauthorized changes or modifications to the product Doing so may cause fire or an electric shock In some cases it can hurt and cause physical injury to the user operator The manufacturer distributor will not be liable for any accidents that occur on products that have undergone unauthorized modifications or changes performed by a third party Make sure to always execute the routine maintenance procedures specified in the manual 5 SIMULINE INC e When cleaning the Surface of the Monitor Glass TFT LCD Plasma use a soft and dry cloth Do not use chemicals such as thinner or benzene Static electricity can destroy electronic parts on IC boards Make sure to IMPORTANT discharge any static electricity by measures such as setting hands to a grounded metal plate before handling IC boards There are some components parts which are not specially designed and manufactured for the product Please understand that in case the manufacturer of such components parts discontinues production or changes the specifications it may not be possible to repair or replace such products regardless of the warranted period STICKER LABELS The Mini Rider 2 contains sticker and labels stating the product s Serial Number S N and electrical specifications When you request a repair done or have any inquiries with regard to spare parts check your S N first before
42. uator 1 Actiatar eS scl SY AG gt ele a D Area eener Cahin cancar Item Description Notion SEN Motion Driving Actuators and anti twist structure made of links Mechanism MCU Motor Controller Unit Controllers that drive the actuators 3 units SCU System Console Unit Contains system control movie control unit and coin tower Area Sensor Area sensors that detect any obstacles until the obstacles are removed and resumes after 3 sec When triggered motion stops Door Door for riders one side Cabin Sensor Cabin sensors that detect any obstacles until the obstacles are removed and resumes after 3 sec When triggered motion stops Pillar Frame Structure that hold up the motion system and MCU Cabin Semi enclosed cabin with seats for 2 Top Sign Board Sign Board 17 SIMULINE INC 5 2 SCU System Console Unit Front O P Panel Coin vault Cash Box Can Cable DI O Cable VGA Cable Speaker Cable lt System Control Computer gt Front Panel gt lt Transformer gt SIMULINE INC 5 3 SCU System Console Unit Back Power Cutoff Switch System Off Switch Power Cable Main Power Switch lt SCU Rear Panel gt 5 4 MCU Motion Control Unit Actuator xwe e Motor Power Connector Can Connector MCU Power input conne ES 19 SIMULINE INC lt
43. ufacturers Warranty e Make sure the Monitor Adjustments are carried out as per display service manual Do not operate the product with On Screen flickering or with colour blurring Using with out proper adjustments may cause dizziness to the game players or to the customers e When transporting or re selling MR 2 the service manuals must accompany the product In case commercially available equipments such as printers have been used with MR 2 then it is important to keep all the service manuals together to help the next purchaser or the third party operator to install the MR 2 with out any problems Description herein contained may be subject to improvement changes without notice The contents described herein are full prepared with due care However should any question arise or errors can be found please contact Simuline 2 SIMULINE INC INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION Normally at the time of shipment Simuline products are in a status allowing for usage immediately after transporting to the location Nevertheless an irregular situation may occur during transportation Before turning on the power check the following points to ensure that the product has been transported in a satisfactory status Are there any dented portions or defects cuts etc on the external surfaces of the cabinet Are the Casters and Adjusters damaged Does the power sup
44. ve experienced spasms convulsions or unconsciousness after playing a TV video or similar game Persons who have neck or back trouble e Pregnant women or persons who are intoxicated Persons susceptible to vomiting from amusement rides Persons that do not follow waming signs e Even persons who have never experienced discomfort due to phobic stimulation may experience dizziness nausea and or headaches from playing this game e H discomfort becomes severe advice a player to consult a doctor e Do not place any heavy articles or beverages on top of the product Accidents from the falling articles and accidents due to electric shock can occur e Do not insert your finger or any foreign substances into any open parts or doors of the product It may cause electric shock or short circuit e Do not lean on or climb on the product It may cause accidents from falling and turnover of the product e Do not pull out the power plug recklessly It may cause short circuit or electric shock e For safety reasons persons shorter than 140cm 55 11 in are not permitted to play this game Please explain that such persons cannot be safely secured with the provided safety belt e Persons whose weight is over 120kg 265lbs are not permitted to board e Playing without the seat belt fastened can cause an accident by falling from the cabin Make sure the player secures their body with the seat belt before playing the game e No one should h
45. y tip over and cause damage or injuries if too much pressure is applied It is recommended that one person should hold on to SCU as the other secures the bolts 38 SIMULINE INC Nut 4 Black M8 Spring amp Flat Washers Used lt Fig 8 13a SCU gt 14 Top Sign Board Q there are 2 kinds of the Top Sign Board One is in two pieces and the other is in one piece Each are 2sets Join the two piece board with a joiner bracket joiner bracket Truss bolt 8 Black M5x12 lt Fig 8 14a gt Attach the Top Sign Board to the Support frame using the Truss bolts Caution If not careful Top Sign Board may fall and cause injuries or damages This may require more than 1 person M5x12 lt Fig 8 14b gt 39 SIMULINE INC 0 Attach the step to the Door Support Frame and fasten with truss bolts Truss bolt 4 Black lt Fig 8 15b gt Installing Caster Optional use at the site Option Caster is sold separately in case a user requests in order for easy movement within the shop by caster without disassembling the frames a Installing Caster Place the Caster Set on the Pillar Frame and tighten with M8 bolts 40 SIMULINE INC Hex bolt 8 Black M8x25 Spring amp Flat Washers Used O Lift the Pillar frame up by about 60cm from the floor by using hydraulic pressure jockey or ma
46. you contact the manufacturer or the machine distributor The S N is the identification number of each product Same models may have different parts used depending on the production time Also models may be improved after the manual is issued To deal with each case effectively it is necessary to supply the unique Serial Number of the Equipment WARNING LABELS All Simuline products have stickers and labels to warn the users of their safety and any possible danger situations Also the warning labels are fitted to avoid any possible accidents while operating or maintenance work is carried out When machine needs servicing please set up a warning sign to warn the players and the general public Specially a qualified electrical amp electronic engineer should carry out the necessary maintenance work Anyone who will not follow the warning sings will not be allowed to carry out the engineering work or other maintenance duties 6 SIMULINE INC D type MCB 20 Amp Single Pole circuit breaker MCBs or Miniature Circuit Breakers are intended to give protection against overloads and short circuits which can cause damage to cables and equipment Industrial Range D type MCBs detect over currents due to both overload and fault currents The MCB will operate and interrupt the supply to prevent damage to the installation www tic direct co uk Products CM9020D html For valuable information please click the above Link
Download Pdf Manuals
Related Search