User Manual
Contents
1. Options Meaning The IP of TFTP server needs to be configured If it is non zero or not blank the IP phone will attempt to retrieve new configuration file or new code image from the specified tftp server at boot time It will make up to 3 attempts before timeout and then it will start the boot process using the Firmware fe existing code image in the Flash memory If a tftp server is configured and a new code image is Upgrade via me TETP server retrieved the new downloaded image will be verified and then saved into the Flash memory Be careful when the TFTP is in progress the phone back light on LCD screen will be up Do NOT interrupt the process especially the power supply otherwise might cause the device dead Be patient as in some network this process will take up to 15 minutes The URL for the HTTP server used for firmware upgrade and configuration via HTTP For Firmware example http upgrade my VoIPservice com 6688 IPPH202 Here 6688 is the specific TCP port Upgrade via that the HTTP server is listening to it can be omitted if using default port 80 Note Auto Upgrade HTTP server has to be set to Yes to enable HTTP upgrade Choose Yes to enable HTTP upgrade and provisioning In Check for new firmware every ___ Auto Upgrade days field enter the number of days to check the HTTP server for firmware upgrade or configuration This parameter defines the URI or IP address of the NT2. oii preference order in SDP message The first Codec in this list can be entered by choosing the appropriate option in Choice 1 Similarly the last Codec in this list can be entered by choosing the appropriate option in Choice 7 G723 Rate This defines the encoding rate for G723 codec By default 6 3kbps rate is chosen iLBC Frame This defines the size of the iLBC codec frame The default setting is Size 20ms iLBC Payload Type This defines payload time for iLBC Default value is 97 Voice Frames This field contains the number of voice frames to be transmitted in a single packet When setting this value the user should be aware of the requested packet time used in SDP message as a result of configuring this parameter This parameter is associated with the first codec in the above codec Preference List or the actual used payload type negotiated between the 2 conversation parties at run time For example if the first codec is configured as G723 and the Voice Frames per TX is set to be 2 then the ptime value in the SDP message of an INVITE request will be 60ms because each G723 per TX voice frame contains 30ms of audio Similarly if this field is set to be 2 and if the first codec chosen is G729 or G711 or G726 then the ptime value in the SDP message of an INVITE request will be 20ms If the configured voice frames per TX exceeds the maximum allowed value the IPPH 202 will use an
3. Message button on the phone an INVITE message will be sent to that extension to allow the user to retrieve messages This parameter allows users to configure a User ID or extension number to be automatically dialed upon Off hook off hook Please note that only the user part of a SIP address needs to be entered here The IPPH 202 Auto Dial will automatically append the and the host portion of the corresponding SIP address eee oa Default is No If set to Yes Call Forwarding amp Do Not Disturb are supported locally Pee Call Default is No Waiting Default The user can setup up one number on each of the ring tones 1 2 and 3 When a call is received from one Ring Tone of these numbers the respective ring tone will be generated Other Settings VOIP SUPER OPTIONS gt Other Settings E Via TFTP Server 0 p p p DEVICE STATUS a al BASIC OPTIONS ee Via HTTP Server SI Automatic HTTP Upgrade No Yes check for upgrade every days default 7 days NTP Server time nist gov URI or IP address SUBSCRIBE for MWI No do not send SUBSCRIBE for Message Waiting Indication Yes send periodic SUBSCRIBE for Message Waiting Indication G Lock Keypad Update Ho C Yes If Yes configuration update via keypad is disabled Debug Server Address l Debug Level NONE gt Device paseword to cenfigure this page SaveSet Reboot Super Password Other Settings
4. 1 Insert power adapter into back of the phone and connect it to a power outlet 2 Connect internet cable from back of the phone WAN Port to broadband modem router hub or switch 3 For IPPH 202B connect internet cable from back of the phone PC Port to a PC Warning Please do not use a different power adapter Using other power adapter may damage the IPPH 202 and will void the manufacturer warranty 5 BASIC OPERATIONS 5 1 Get Familiar with Function Keys 0 9 To input numbers Scroll to next menu submenu selection or lower the volume of the loudhailer _ Scroll to previous menu submenu selection or rise the volume of the loudhailer MENU Enter menu mode CALLED Show the phone number that has been called out CALLERS Show the phone number that has been called in MSG Get the voice message or other messages HOLD Hold the present call for the moment TRANSF Transfer the present call to another number CONF Conference call for three sides FLASH Used to switch between two lines MUTE DEL Delete the call history voice message etc REDIAL Dial the last called number SPEAKER Enter the hand free mode Memory Key M1 Under Development M10 5 2 Dialing or Making Calls 5 2 1 Two dialing modes Ordinary dialing mode 4 ways 1 Pick the up handset or press the SPEAKER button 2 Press the REDIAL button to dial the Dial the last called number 3
5. Call Waiting Disable are supported locally Disable Call Waiting No 8 CY es system ring tone custom tone 1 used if inco caller ID is Default Ring Tone we oe custom ring tone 2 used if incoming caller ID is custom ring tone 3 used if incoming caller ID is SaveSet Reboot Phone Features Settings Options Meaning Early Dial Default is No Use only if proxy supports 484 response Pe Fee Sets the prefix added to each dialed number Prefix No Key PES A Entry Default is 4 seconds This is the time lapse after entering a phone number for the IPPH 202 to begin Timeout completing your call Use as This parameter allows users to configure the keyto be used as the Send Enter or Dial key If Dial Ke set to Yes pressing this key will immediately trigger the sending of dialed numbers entered thus far y In this case this key is essentially equivalent to the Re Dial key If set to No this key will then be included as part of the dial string to be sent out Auto Answer Default is NO When set to yes the phone will automatically pick up the call and turn the speaker on Voice Mail This parameter defines the User ID or extension number of a 3rd party voice mail system where the user may have an account By Voice Mail cae i j UserID defining this Voice Mail extension when the user presses the
6. po Seconds Default 20 seconds Use NAT IP if specified this IP address is used in SIP SDP messege Proxy Require if specified the content will appear in Proxy Require header Send DTMF IL inaudio C viaRTP RFC2833 C via SIP INFO DTMF Payload Type fi oO Sond Anonymous Cu CO Yes Yes caller ID will be bucked Send Flash Event No C Yes Flash will be sent as a DTMF event if set to Yes SaveSet Reboot pe d The IPPH 202 will then display the following screen to confirm that the changes have been saved Please wait 5 seconds and then reboot the device DEVICE STATUS BASIC OPTIONS SUPER OPTIONS Your changes have been saved Please wait 5 second and then reboot the device Reboot 6 3 5 Rebooting the IPPH 202 You can reboot the IPPH 202 by clicking on the Reboot button after each update to the configuration page Alternatively you can reboot by unplugging the power supply of the IPPH 202 and then powering it on again If your IPPH 202 ever becomes stuck or un responsive you can unplug the power supply to reboot it Frequent rebooting by unplugging the power supply is not recommended and should not be necessary 6 4 Programming Using Keypad Configure with keypad Show 1 dhcp on Press 1 dhcp off as the current option Press MENU and enter the menu mode Press or to choose Press MENU to save or exit Restart to be effective Show 2 IP A
7. Disturb When someone call you do not disturb busy tone will be heard To use this feature pick up the handset and dial 70 It will be cancelled when you hang up 79 Unconditional Call Forward To use this feature dial 72 and get the dial tone Then dial the forward number and for a dial tone and then hang up 73 Cancel Unconditional Call Forward To cancel Unconditional Call Forward dial 73 and get the dial tone then hang up Busy Call Forward To use this feature dial 90 and get the dial tone Then dial the forward number 90 CCHI S and for a dial tone and then hang up 91 Cancel Busy Call Forward To cancel Busy Call Forward dial 91 and get the dial tone then hang up 02 Delayed Call Forward To use this feature dial 92 and get the dial tone Dial the forward number and for a dial tone and then hang up 903 Cancel Delayed Call Forward To cancel this feature dial 93 get the dial tone and then hang up When in conversation this action will switch to the new incoming call if there is a call waiting Flash Hook indication When in conversation without an incoming call this action will switch to a new channel to make a new call 6 PROGRAMMING IPPH 202 6 1 Default Manager Administrator Password admin 6 2 Major Sets of Configuration Data There are 8 major sets of data related to the programming of the IP Phone 202 IP Ty
8. compactness By converting analog voice for transmission over the internet the IP Phone 202 allows users with broadband internet connections to make calls to and from anywhere in the world The IPPH 202 is fully compatible with SIP industry standard and can interoperate with many other SIP compliant devices and software on the market 2 WHAT IS IN THE PACKAGE The IPPH 202 package contains 1 One IPPH 202 VoIP phone 2 One IPPH 202 phone handset 3 One universal power supply 4 One Ethernet cable 3 PRODUCT OVERVIEW 3 1 Key Features e Supports SIP 2 0 e Supports TCP UDP IP RTP RTCP HTTP ARP RARP ICMP DNS DHCP NTP TFTP protocols DHCP support for LAN or Cable modem e PPPoE support for ADSL or Cable modem e Supports IP address dynamic DHCP system e Supports multi method NAT traversal and anti virus crossing e Compliant with ITU T standard and DTMF form and check e Supports codecs G 723 1 5 3K 6 3K G 729A B iLBC G 726 G 728 and wide band G 722 sound coding and decoding e Supports dynamic sound check VAD Voice Activity Detection CNG Comfort Noise Generation Line Echo Cancellation G 168 and AGC Automatic Gain Control e Dynamic sound technology with sound quality as good as traditional telephones e Advanced Digital Signal Processing DSP to ensure superb hi fidelity audio quality e Support standard voice features such as Caller ID Display or Block Call Waiting Hold Transfer Forward FLASH in ban
9. from the first DHCP server it discovers on the LAN it attaches to PPPoE account settings can be configured here too if the user is using DSL ADSL connection Users can specify DNS server manually by entering If Static IP mode is selected then the IP address Subnet Mask Default Router IP address DNS Static IP Server 1 primary and mandatory DNS Server 2 secondary and optional fields will need to be configured These fields are reset to zero by default Other settings BASIC OPTIONS gt Other Settings rme Zone GMI aW US Eastem lime New York E Yoa ifact to Yoa display tine willbe 1 hour ahead of normal timo e car Month Day Month Liay Year Day Miinth Vear Basi User Password Basic user paceword to contigure thie device Savevet Iteboot Other Settings Options Meaning This parameter controls how the displayed date time will be adjusted according Time Z cpt are iain to the specified time zone This parameter controls whether the displayed time will be daylight savings time or not If set to Yes then the displayed time will be 1 hour ahead of normal time Daylight Savings Time Date Displa Play This parameter controls the date display format Format Basic User This contains the password to access the Basic Web Configuration page This Password field is case sensiti
10. P server which the IP phone will use to NTP Server synchronize the current date time SUBSCRIBE Default is No When set to Yes a SUBSCRIBE for Message Waiting Indication will be sent for MWI periodically FXS Impedance Selects the impedance of the analog telephone connected to the Phone port o ae If this parameter is set to Yes the configuration update via keypad is disabled Debug This parameter defines the URI or IP address of the Debug server Server Address P 8 i Debug Level Default is None Choose the debug level you want when using this function Super Password Default is Admin This contains the password to access the Advanced Web Configuration page This field is case sensitive Network Settings VOIP BASIC OPTIONS gt Network Settings Dynamically Assigned IP DHCP by default or PPPoE DEVICE STATUS PPPoE Account D BASIC OPTIONS PPPoE P 1 Se el a Preferred DNS Server fo p p p JM Sieis aL ROMEO EM O Static IP IP Address fa fies p fo Subnet Mask E Wb B W j Default Router bE ib ip ip DNS Server 1 E E p W j DNS Server 2 bP pP pP po _SaveSet _Reboat Network Settings Options Meaning Dynamically Assigned IP DNS server s IP address If DHCP mode is enabled then all the field values for the Static IP mode are not used even though they are still saved in the Flash memory and the IP phone will acquire its IP address
11. User Manual Model IP Phone 202 Table of Contents Recommendation Please read the entire manual before using your new IPPH202 1 Welcome 2 2 What Is In the Package 2 3 Prod ct OVERVIEW cesses cosssccsossccatenenccastvencdenssencibetcisnsddisuncasedeaucbetndscuddennncegsveatcsexccand uiess 2 Sal Key Feat r s s desssisssacssvssdensstaasisssns sd sadennssassavacdensetnasis sats caendi inseadss seeceias sess ossro dosissen 2 3 2 Hard ware Specifications sisscssssecssesvesiseesvecsevavascevnssevcncoseucseesenassvecseces sess ensssensetenenssees 3 4 Installation 4 5 Basic Operations 4 5 1 Get Familiar with Function Keys 4 5 2 Dialing or Making Calls 4 5 2 1 Two dialing modes 4 5 2 2 Call Hold 5 5 2 3 Call Flash 5 5 2 4 Call Transfer 5 5 2 4 1 Blind Transfer 5 5 2 4 2 Attended Transfer 5 5 3 Receiving Calls 6 5 4 Call Features 6 6 Programming IPPH 202 7 6 1 Default Manager Administrator Password 7 6 2 Major Sets of Configuration Data 7 6 3 Programming Using Web Browser 7 6 3 1 Determine your VoIP device s IP address 8 6 3 2User Programming and Configuration 8 6 3 3 Configuration Options and Explanations 9 6 3 4 Saving the Configuration Changes 17 6 3 5 Rebooting the IPPH 202 18 6 4 Programming Using Keypad 19 7 Test Your Setup 21 8 Technical Support Contacts 21 1 WELCOME IPPH 202 is an internet telephone set that features superb audio quality rich functionalities high level of integration and
12. View the CALLED history and choose to redial 4 View the CALLER history and choose to redial IP address dialing mode 1 Press MENU button to view the local IP address 2 Dial the IP address and press to start calling 5 2 2 Call Hold While in conversation pressing the Hold button will put the remote end on hold Pressing the Hold button again will release the previously Hold state and the bidirectional media will resume 5 2 3 Call Flash Assuming that call party A and party B are in conversation Party A wants to speak to party C or if there is another incoming call 1 Party A presses FLASH to get a dial tone 2 Party A then dials party C s number then Party A and party C now are in conversation 3 By pressing FLASH button Party A can choose to have conversation with B or C 5 2 4 Call Transfer 5 2 4 1 Blind Transfer The user can transfer an active call to a third party without announcement Assuming that call party A and party B are in conversation Party A wants to transfer party B to party C 1 Party A presses TRANSF to get a dial tone 2 Party A then dials party C s number then 3 Party A then press REDIAL A quick confirmation tone if the transfer has been successful Party B and party C now are in conversation 4 Party A can hang up or make another call 5 2 4 2 Attended Transfer The user can transfer an active call to a third party without announcement Assuming that call
13. any Assigned user ID or phone number Outbound Proxy SIP User ID Account ID Can be same as or different from SIP User ID Auttentication Passwd O Forsecwrty password does nt display Nome Es Use DNS SRV Go CYs User ID is phone number No Yes SIP Registration Gye CHo Unregister On Reboot Cya Cio Register Expiration EO Minutes Default is 1 hour max 45 days Local SIP Port 060 Defantt 5060 Local RTP Port E004 102465535 default 5004 Use Random Port CNo CYes C No NAT Traversal _ Yes STUN seris URL or IP pori ho Seconds Default 20 seconds Keep Connected Interval Use NAT IP af specified this IP address is used m SIP SDP message pa SUPER USER OPTIONS PAGE SIP Settings Options Meaning na eee Gatekeeper s SIP Server s URL or IP address Address Outbound Proxy SIP Outbound Proxy Server s URL or IP address SIP User ID SIP service subscriber s User ID Account ID SIP service subscriber s Authenticate ID Can be identical to or different from SIP User ID Authentication A Por SIP service subscriber s account password for security the password does not display Password Name SIP service subscriber s name which will be used for Caller ID display Use DNS SRV Default is No If set to Yes then the client will use DNS SRV for server lookup User ID is Phone Number SIP Registration If the IPPH 202 has an assigned PSTN telephone number then this fiel
14. d and out of band DTMF RFC2833 Dial Plans off hook auto dial configurable emergency dialing e g 911 early dial click to dial e Advanced adaptive jitter buffer control packet delay amp loss concealment technology e Support multi net construction e Auto manual indication e Built in world clock auto time display e Has single or dual network ports 10 BaseT e Support dial code regulation based on E 164 e Support TFTP remote upgrade e English language IE setting e Dialed received number check e Speed dial function e Emulate telephone dialing e Easy volume adjustment e P to IP and point to point communication e HiFi low delay net sound communication e Local IP number local number check e Instant plug and play e Full duplex hands free speakerphone superior frequency e Call forwarding call waiting call hold call transfer redial call log volume control voice mail with indicator 3 2 Hardware Specification The table below lists the hardware specification of IPPH 202 WAN interface 1 x RJ45 10 Base T PC interface Available for IPPH 202B Product Color Almost Black or Grey Universal Switching Power Supply Input 100 240VAC 50 60 Hz Output 9VDC 600mA UL certified Dimension 23cm L 19cm W 10cm H All Package Weight 1 01kg Operation Temperature 0 40 C 32 104 F Storage Temperature 30 65 C 22 149 F Humidity 10 95 4 INSTALLATION
15. d save the maximum allowed value for the corresponding first codec choice The maximum value for PCM is 10 x10ms frames for G726 it is 20 x10ms frames for G723 it is 32 x30ms frames for G729 G728 64 x10ms and 64 x2 5ms frames respectively Laye IOS This field defines the layer 3 QoS parameter which can be the value used for IP Precedence or Diff aye 9 Serv or MPLS Default value is 48 Layer 2 QoS This contains the value used for layer 2 VLAN tag Default setting is 0 Silence This controls the silence suppression VAD feature of G723 and G729 If set to Yes when a silence Suppression is detected small quantity of VAD packets instead of audio packets will be sent during the period of no talking to make the connection feel more natural If set to No this feature is disabled Phone Features Settings VOIP DEVICE STATUS BASIC OPTIONS SUPER OPTIONS gt Phone Features Settings Early Dial No Yes Select Yes only if proxy supports 424 response Dial Plan Prefix This prefix string is added to each dialed number No Key Entry Timeout fa seconds Default is 4 seconds Use as Dial Key CNo Yes Ifset to Yes will function as the Redial key Auto Answer No C es Voice Mail UserID User D extension for 3rd party voice mail system Offhook Auto Dial User Diextension to dial automatically when offhook CNo Yes Enable Call Features If Yes Call Forwarding amp
16. d should be set to Yes Otherwise set it to No If Yes is set a user phone parameter will be attached to the From header in SIP request message to SIP server This parameter controls whether the IPPH 202 needs to send REGISTER messages to the proxy server The default setting is Yes Unregister on Default is No If set to Yes then the SIP user will be unregistered on reboot Reboot Register This parameter allows the user to specify the time frequency in minutes the IPPH 202 refreshes its pe registration with the specified gatekeeper SIP server The default interval is 60 minutes or hour P The maximum interval is 65535 minutes about 45 days Local SIP Port This parameter defines the local SIP port the IPPH 202 listens and transmits signals The default value is 5060 Local RTP port This parameter defines the local RTP RTCP port pair the IPPH 202 will listen and transmit signals It is the base RTP port for channel 0 When configured channel 0 will use this port _value for RTP and the port_value 1 for its RTCP channel 1 will use port_value 2 for RTP and port_value 3 for its RTCP The default value is 5004 Use Random Port When set to Yes this parameter will force random generation of both the local SIP and RTP ports This is usually necessary when multiple IPPH 202 are behind the same NAT NAT Traversal This parameter defines whether
17. ddr Press MENU to show the current IP address If DHCP is OFF enter new IP address Press or to exit Press MENU to save or exit Restart to be effective Show 3 SubNet Press MENU to show subnet address If DHCP is OFF enter new subnet address Press or to exit Press MENU to save or exit Restart to be effective Show 4 routEr Press MENU to show router gateway address If DHCP is OFF enter router gateway address Press or to exit Press MENU to save or exit Restart to be effective Show 5 dnS Press MENU to show DNS address If DHCP is OFF enter new DNS address Press or to exit Press MENU to save or exit Restart to be effective Show 6 tFtP Press MENU to show tFtP address Enter new tFtP address Press or to exit Press MENU to save or exit Show 7 G 711u 2 Press MENU to show current codec Press or to view all codec options 1 G 711A 2 2 G 722 2 3 G 723 1 4 G 726 2 5 G 728 8 6 G 729 2 7 iLBC 1 Press 1 to 9 to choose the frame number Press MENU to exit No need to restart 8 Show 8 SIP SP 1 Press MENU to show SIP server service provider Press or to view all usable SIP server 1 9 Press MENU to save and exit SIP server must be configured through Web browser 9 Show 9 codE rEL Pre
18. e for DTMF using RFC2833 Send If this parameter is set to Yes the From header in outgoing INVITE message will be set to Anonymous anonymous essentially blocking the Caller ID from displaying This parameter allows users to control whether to send a SIP NOTIFY message indicating that the Send Flash 3 A phone s Flash key has been pushed or just to switch to the voice channel when users press the Event Flash key Audio Settings VOIP DEVICE STATUS BASIC OPTIONS Treferred Codecs 1723 Rate SUTER OPTIONS gt Audio Settings Preference 1 E PEMU Preference 2 E PCMA Preterence 4 G723 Preference 4 G729 Prefere 5 G726 32 Treference 6 G728 Preference 7 ILB Rreference 2 E GEAR 63 Kops vwuding rale 53 Kops exvuding rale 4 4 it 4 4 iLBC Frame Size iLBC Payload Type MVoiee Frames per TX Palms llms p7 Between 96 and 127 default is 93 2 2 Up to 10 20 32 and 64 for G71 1 5726 4723 and other codecs respectively Layer 3 QoS 18 qi Sea or Precedence value ayer 2 ns 802 1Q VLAN Tag ju 202 1p priority valuc ju 0 7 Silene Suppressive No Yes SaveSet _Reboot Audio Settings Options Meaning The IPPH 202 supports up to 7 different Codec types including G 711 G 723 1 G 726 G 728 G 729A B iLBC Users can configure Codecs in a preference list that will be included with the same
19. party A and party B are in conversation Party A wants to transfer party B to party C 1 Party A presses Flash to get a dial tone 2 Party A then dials party C s number then 3 If the call is answered press flash to complete the transfer operation 4 if the call is not answered pressing flash button to resume the original call 5 2 5 3 Way Conference Call Assuming that call party A called party B and now they are in conversation Party A wants to let party C to attend the conversation 1 Party A presses CONF to get a dial tone 2 Then press party C s number then or wait for 4 seconds Party A and party C now are in conversation 3 Party A presses CONF again now the 3 parties are all in conversation Note The server needs to support this function for this feature or the phones to work 5 3 Receiving Calls When phone rings from incoming calls and to receive the incoming calls pick up the receiver or press the SPEAKER button After picking up the call to switch from hand free mode to receiver mode just pick up the receiver and begin talking the speakerphone will be deactivated To switch from receiver mode to hand free mode press down the SPEAKER button while placing the receiver back to resting location Now the speakerphone is activated and you may continue speaking without receiver 5 4 Call Features Following table shows the new call features of IPPH 202 70 Do Not
20. pe IP Address Subnet Mask Router DNS Serverl DNS Server2 Account and Password The IP Phone 202 needs to be assigned an IP address in order for it to access the internet and make telephone calls There are 2 kinds of IP address types IP Type 1 IP Type 0 Static IP address is manually entered by you There are 5 fields to be filled IP Address 192 168 0 160 default Subnet Mask 0 0 0 0 Default Router 0 0 0 0 DNS Server DNS using 0 0 0 0 DNS Server2 DNS spare 0 0 0 0 2 IP Type 1 DHCP IP address is dynamically assigned by router if any at the location thereby allowing it to access the internet and make calls Plug the IP Phone 202 into the router using the LAN port connection The IP address is assigned to the IP Phone 202 automatically 3 User Account Assign your own user name 4 User Password Assign your own password 6 3 Programming Using Web Browser IPPH 202 has embedded Web server and HTML pages that allow users to configure the IPPH 202 through an easy to use Web browser interface such as Microsoft s Internet Explorer or Netscape browser Below is a screen shot of the IPPH 202 configuration page a 7 I P SUPER OPTIONS gt SIP Settings SIP Server Address IP address or URL DEVICE STATUS Outbound Proxy IP address or URL if any SIP User ID Assigned user ID or phone number Account ID Can be sarne as or different ftom SIP User ID Authentication Password For
21. secunty password does not display Nome CSC tir UseDNSSRYV No C Yes User ID is phone number No C Yes SIP Registration Cya Cuo i Unregister On Reboot CY No Register Expiration EO Mima Diui is 1 hour max 45 days Local SIP Port E060 Defantt s060 Local RTP Port E004 102465535 default 5004 Use Random Port No C Yes NAT Traversal Cle ee C Yes STUN ommeris RL ogee Keep Connected Interval PO _ Seconds Default 20 seconds Use NAT IP if specified this IP address is used in SIP SDP message Tf E v b2 6 3 1 Determine your VoIP device s IP address On the IPPH202 while handset is up push the MENU key to obtain the phone s IP address which will show on the LCD screen If the IP address is all 0 s then your VoIP device does not have internet connection Please go back to step 1 and check your installation before proceeding 6 3 2 User Programming and Configuration From your web browser the IPPH 202 will show the following login screen Password Password admin 6 3 3 Configuration Options and Explanations After a correct password is entered in the login screen the embedded web server inside the IPPH 202 will show the configuration page which is explained in details below SIP Settings VOIP DEVICE STATUS BASIC OPTIONS LP Settings SUPER OPTIONS SIP Server Address gt SIP Settings IP address or URL IP address or URL if
22. ss Menu to display the code releases Press or to view 1 b 2004 06 12 date boot code 2 1 0 0 18 version boot code 3 P 2004 06 21 date phone code 4 1 0 5 3 version phone code 5 c 2004 05 06 date vocoder 6 1 0 0 6 version vocoder 7 h 2004 06 17 date web server 8 1 0 0 36 version web server 9 Ir 2004 05 12 date 1st ring tone 10 1 0 0 0 version ring tone 11 2r 2004 05 12 date 2nd ring tone 12 1 0 0 0 version ring tone 13 3r 0000 00 00 date 3rd ring tone 14 0 0 0 0 version ring tone all show 0 means not usable or not supported Press Menu to exit 10 Show 10 Phy Addr Press MENU to show MAC address Press or to exit 11 Show 11 ring 0 Press MENU to hear current ring tone Press or to choose ring tones 4 ring tones available at present ring0 default ring 1 ring2 ring3 are not usable or not supported Press MENU to choose and save Be effective directly No need to restart Show rESEt ATTENTION A gt Enter MAC address and press MENU IPPH 202 will restart and get back to all default setting All former configuration will be lost B gt Press MENU and the phone will restart Others When in the mode e Press or and show ring 4 press or to adjus
23. t the ring volume form 0 to 7 69 e Press SPEAKER or pick up handset then press or to adjust voice volume 7 TEST YOUR SETUP If connection is successful you can begin using your VoIP phone Your VoIP service provider will provide you with calling instructions Due to varying dialing schemes of each provider we do not have specific dialing to recommend 8 TECHNICAL SUPPORT CONTACTS e mail office alinea bg
24. the IPPH 202 NAT traversal mechanism will be activated or not If activated by choosing Yes and a STUN server address is also specified then the IPPH 202 will automatically follow the STUN client specifications Under this mode the embedded STUN client inside the IPPH 202 will attempt to detect if there is a and type of firewall NAT it is sitting behind through communication with the specified STUN server If the detected NAT is a Full Cone Restricted Cone or a Port Restricted Cone the IPPH 202 will attempt to use its mapped public IP address and port in all of its SIP and SDP messages If the NAT Traversal field is set to Yes with no specified STUN server the IPPH 202 will periodically every 20 seconds send a blank UDP packet with no payload data to the SIP server to keep the hole on the NAT open Keep Connected Interval This parameter specifies how often the IPPH 202 sends a blank UDP packet to the SIP server in order to keep the hole on the NAT open Use NAT IP NAT IP address used in SIP SDP message Default is blank Proxy Require SIP Extension to notify SIP server that the unit is behind the NAT Firewall This parameter controls how DTMF events are transmitted There are 3 ways In Audio which Send DTMF means DTMF is combined in audio signal not very reliable with low bit rate codec via RTP RFC2833 or via SIP INFO ae Pey Wau This parameter sets the payload typ
25. ve Device Status VOIP MAC Address 00 09 45 70 88 86 WAN IP Address 192 168 1 126 Mesias E Software Version 206 5 2005 09 19 BASIC OPTIONS System Up Time O day s 0 hour s 2 minute s SUPER OPTIONS SUPER OPTIONS Registered No PPPoE Link Up disabled NAT detected NAT type is open Internet NAT Mapped IP 00 0 0 NAT Mapped Port 0 Total Inbound Calls a Total Outbound Calls 0 Total Missed Calls o Total Call Time O Minutes Total SIP Message Sent a Total SIP Message Received 0 Total RTP Packet Sent a Total RTP Packet Recerved 0 Total RTP Packet Loss 0 Reboot Device Status fields Meaning MAC Address The device ID in HEX format This is very important ID for ISP troubleshooting WAN IP ees This field shows WAN port IP address Address Software Version This field shows the software version System Up Time This shows system up time since last reboot Registered This shows whether the unit is registered to service provider s server PPPoE Link Up This shows whether the PPPoE is up if connected to DSL modem This shows what kind of NAT the BudgeTone is behind if it is not in oper NAT interne NAT Mapped IP WAN side public IP if connected to LAN of a SOHO NAT router Other Status Please refer to the page displayed 6 3 4 Saving the Configuration Changes Once a change is made users should click on the SaveSet button in the Configuration page Keep Connected Interval
Download Pdf Manuals
Related Search