USER GUIDE.cdr
Contents
1. MICROWAVE SENSOR USER GUIDE The multifunctional sensor is suitable for all kinds of automatic door Technical wave amp CPU Detection principle Doppler Frequency 10 525Ghz Frequency density lt lt 5mW cm Installation height Max 3m Radiation angle level 120 vertical 80 Detection range 4m w 3 m D Detection mode motion Motion detection speed Min 5cln 5 test along the longitudinal axis of antenna Adjust detection range adjust planar antenna elevation Adjust detection sensitivity adjust potentiometer Environment temperature 20 C 55 C Technical datas Anti interference EMC comply with89 336EEC Power voltage 12 24V AC or DC Power frequency 50 60Hz Power consumption lt 2W output standard relay Max power voltage AC220V DC28V Max Power current 1A Hold output time 1S Wire connect plate Elevatio Size 115x90x65 mm Weight including wire 220g Material ABS plastic Color silver gray Wire length 2 5m Base plate Antenna Detection range under antenna longitudinal ar 4 Near to the door Operation illustration with a too far distance adjust antenna angle to min 0 A Near to the door Normal operation illustration adjust antenna angle to 30 A Far from the door Normal operation illustration adjust antenna angle to max 45 Adjust detection range l Remark The detection range has been tes2. ted before sale the adjustment is required only under special situation Adjustment method Press the edge of the antenna by hands and rotate the fixed axis Adjust sensitivity Remark It need to adjust only when the sensor is not sensitive or the detection range is small Adjustment method Adjust the potentiometer by using mini screwdriver turn right to increase detection range and sensitivity otherwise decrease Connect power Signal Min Max Sensitivity Sensitivity Detection range Detection range Potentiometer Installation guide q 1 Caution don t allow to press the antenna surface during installation 2 Fix the sensor tightly for vibration prevention 3 Don t put the motion or vibration objects in the detection range Open the sensor cover e Open the cover from the base plate by using a blade screwdriver Wire connection e Connect the wire goes through the hole to terminal
Download Pdf Manuals
Related Search