Home

Portable Multi Logger ZR

1. Creates a new file _ oe Changes the file or folder name E Copy file folder Copies files or folders Select file to copy delete Selects the file to copy or delete fl Select copy destination and copy Selects the copy destination and copies ll Delete file folder Deletes files or folders EJ File sort order occcccoooooooooo Changes the order in which files are displayed E View setting ooooooconooooooo Changes displaying information for files E Format disk Formats the disk Details of allowed operation will depend on the operation target lt gt Moves between folders lt Move up one folder gt Move down one folder ENTER Finalizes the operation QUIT Closes the file box ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 86 lt Setting example gt The following shows an operation example for creating a TEST folder as the save destination and automatically saving captured data into it PAE ers T TRTE OPT DOTAR vi 3 dak In the Data Save Destination choose Folder and press the oi LL ENTER key L Rec ard Set tings I sampling me Capture des Tar TTAR mem File Name L HEM lt ALITO GED Fo de r Name Type UFO File Type Emari Cancer SEN RAP Pals TRIS DPT OTA HER a Use the gt key to move to the ta
2. O For details on data capture such as timer trigger and repeat see p 69 LT For details on memory to be used for data capture see p 65 2 Time DIV Displays the current time scale 40 Window names and functions ZR RX70 User s Manual Item 3 USB memory access display Description Do not remove the USB memory and or turn OFF the device while the USB memory is being accessed Failure to observe this caution may result in corrupted data and data loss LHA No USB memory is inserted WISE USB memory is inserted but not being accessed USE USB memory is being accessed Do not remove the USB memory 4 Internal flash memory access display Do not turn OFF the device while the internal flash memory is being accessed Failure to observe this caution may result in corrupted data and data loss ul The internal flash memory is not being accessed MEM The internal flash memory is being accessed 5 Key lock display 6 Remote display tae The keys are not locked Normal operation is enabled QUA All the keys are locked O For details on memory to be used for data capture see p 94 Taw The ZR RX70 is in local mode The ZR RX70 can be operated from itself el Es The ZR RX70 is in remote mode The ZR RX70 can be operated from a PC except for some operations To switch from remote mode back to local mode clear the PC connection The ZR RX70 will automatically return to local
3. Recording lt key can be used to change the zone division Capturing and Replaying lt p gt key can be used to change the zone division Replaying lt key can be used to perform search lt Searches the past side gt Searches the future side ZONE lt p gt key can be used to change the zone division X Y Free Running SAMPLE lt key can be used to change the sampling interval CLEAR Press the lt j or gt key to clear the waveforms on the screen ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 12 Canceling Key Lock with Password A password can be set to ZR RX70 to cancel the key lock No password is set at factory default lt Operation flow gt 1 Set the password Press the lt gt and ENTER keys at the same time to display the password setting screen shown below Specify a 4 digit password Enter New Password jaaa Use the lt gt A V keys to select numbers Press the ENTER key to confirm the password Specifying 0000 will disable password operation In case you forgot your password please contact us to acquire the master password 2 Set the key lock Hold down the lt lt and gt gt keys together for at least two seconds 3 Cancel the key lock Hold down the lt lt and gt gt keys together again for at least two seconds The password setting screen shown below will be displayed Set a password Enter Your Password
4. 17 Data capture bar 16 Scale upper limit 9 Digital display F 15 Waveform display ims SONE E 10 Quick settings 14 Scale lower limit ALARM del 21314 11 Alarm display 13 File name display 12 Pen display Item Description 1 Simplified message Displays the system operation status display Do not turn off the power while the simplified message is Capturing and Replaying Capturing to Internal RAM Capturing to Internal Flash Memory Capturing to USB Memory or Auto Saving those with an asterisk in the list below Otherwise the captured data will be destroyed Make sure that the message is completely gone wait for 2 or 3 seconds before turning off the power Free Runni ng Startup status or data is not being captured Armed Waiting for generation of a trigger after measurement has started Waiting for the time set on the timer ia e Capturing data and replaying captured data ie Capturing data to the internal RAM of the ZR RX70 usas Capturing data to the internal flash memory of the ZR RX70 hee to oe en Capturing data to USB memory ETRE Auto saving data Data captured in the internal RAM is being saved to the internal flash memory or USB memory Replaying data in the internal RAM of the ZR RX70 Replaying data in the internal flash memory of the ZR RX70 Replaying data in USB memory OF Eee Waiting for the specified repeat time to elapse
5. Josh Yy rete Meda e A a a acu SELECTY AA MEE mA 2008 04 11 o O SSCP MERMA 11 49 5b E SPAN TRACE POSITION DISPLAY m lt gt J a Screen SAMPLE ims update rate ONE lzone sec E ALAR 11121 MD Internet Press this switch to move the active channel in the Waveform Digital or X Y screen Switches the display mode Press this key to switch among Waveform Digital Waveform Digital screens and X Y display Expanded Switches the display in the digital display area Press this key to switch among MONITOR SPAN POSITION and TRACE Cursor keys Specifies the speed in which the screen is updated Available update speeds are 2 5 and 10 seconds WEB Server Function 103 1ININIYSASVIN ANY SONILLAS T OMRON ZR RX70 Microsoft Internet Explorer Fle Edt Wew Faeries Tode Hop Om HAG Paw tre Qe O BSS ze ad a L a i _ a e ED MA a xi i 5 5 dess dl htip 192 168 0 1 index html sal Screen update rete 5sec ial 0 014 Screen update speed Specifies the speed in which the screen is updated Available update speeds are 2 5 and 10 seconds Allows memory data from ZR RX70 and data in USB memory to be downloaded to your PC Ge ER yow Favorites Jos Hp Om O S Po pr iS D MO Address 0 WEB Server Function ZR RX70 User s Manual lt About the FTP server function gt When an Internet Explorer FTP connection
6. K 200 lt TS lt 100 0 05 of rdg 3 0 C 100 lt TS lt 1370 0 05 of rdg 2 0 C E 200 lt TS lt 100 0 05 of rdg 3 0 C 100 lt TS lt 800 0 05 of rdg 2 0 C T 200 lt TS lt 100 0 1 of rdg 2 5 C 100 lt TS lt 400 0 1 of rdg 1 5 C J 200 lt TS lt 100 3 7 C 100 lt TS lt 100 2 7 C 100 lt TS lt 1100 0 05 of rdg 2 0 C N 0 lt TS lt 1300 0 1 of rdg 2 0 C W 0 lt TS lt 2315 0 1 of rdg 2 5 C 1 Operating environment 23 C 5 C Left for at least 30 minutes after the power supply is turned on e Filter Line e GND connection e Thermocouple used is T 0 32 other 0 65 110 Standard Specifications ZR RX70 User s Manual Main Functions Item Data record Sampling speeds 1 Memory capacity ZR RX70A 10 20 50 100 200 500 us 1 2 5 10 20 50 100 200 500 ms 1 2 5 10 20 30 60 s External Internal RAM Approx 64 MB SDRAM Internal flash memory Approx 256 MB Flash Memory USB memory No limit except each file must be within 2GB Memory contents Setup conditions Measured data Screen copy Save destination specification 2 Internal RAM internal memory or External USB memory Setting of memory used for data capture Pre trigger Set the number of data capture points Setting range 10 to 1000000 points Setting unit In steps of one point O to 100 Set in steps of 10 Au
7. 1 2 5 10 20 30s 1min When the External Sampling is set data is captured at 10us as internal processing Then the input of an external pulse allows the next internal processing data to be written into the memory Therefore both capturing interval and input error become up to 10us You can use the external sampling function to the extent that the input error can be ignored Input signal ee N V Mm External sampling pulse Internal processing data capturing ue interval Data captured to m data i data memory e When the data capture destination is the internal flash memory or USB memory and the capture file format is Text CSV sampling intervals from 1 to 5ms cannot be selected e When External is selected in the sampling interval you cannot select External Input in the trigger setting When the External Input is already set the trigger is changed to Off Setting Menus ZR RX70 User s Manual 2 2 Data Capture Destination Specifies the data capture destination for captured data Selection Description Internal RAM Captures the measured data to the internal RAM The data will be lost when the power is turned off The data will be overwritten when next data is captured Check the waveform and if it is OK press the File key to save the data See p 80 If Auto Save is set to On data will be automatically saved LT See 2 4 Auto Save p 66 Note This selection can be used for
8. File Format FILE key FILE Menu Filter Free Running Game Ground Connecting Humidity Sensor Information Input Internal flash memory Internal RAM Interval Repeat Interval Sampling Interval KEY LOCK Canceling Key Lock with Password LAN Connection Language LCD Brightness Level Operations Logic Main Functions MENU key Misc Mode Monitor 21 114 79 58 62 65 71 64 48 94 Index 121 XIQNAddV G 122 O P Q R S Name Type 66 81 82 NAVI key 52 NAVI Menu 93 Network Time Settings 79 Noise Countermeasures 36 Operating Environment 18 OPT Settings 75 OTHR Settings 17 Overview 16 Part Names and Functions 20 PC Software 113 POSITION 45 Power On Start 78 Precautions to Observe When Performing Measurement 35 Pulse 61 Quick settings 93 QUIT key 47 Range 59 Rechargeable Battery How to Recharge the Rechargeable Battery 37 Replaying 56 REVIEW key 49 Room Temp Compensation 78 Screen Saver 77 Setting conditions Change Conds 76 Load setting 83 Save setting 83 Signal Types 24 SPAN 45 Span setting 45 61 SPAN TRACE POSITION key 45 Standad Specifications 108 118 119 Start Side Source Settings 70 Start Stop Confirmation Message 78 START STOP key 48 Statistical Calculation Settings 68 Stop Side Source Setting 71 Index W TCP IP Settings Temp Unit Terminal Configuration Text Input TIME DIV key Timer Mode TRACE TRIG Settings Trigger Trigge
9. This menu is used to specify input signal related settings lt Analog Settings gt HERO ME TATA TRIG DPT DTAF nalog and pu Jic Dir Logic Puls se Data T H Input Range Filter 2009 05 21 MEM SE lt Logic and Pulse Settings gt Shenoy TATA TRIG OPT OTHE iy r Sey gl Di mit ay An alog D ata M Logicy Pyle ce PROTA Input eae slope EW etorts MF A de nee cats US TS O i Eje E MTT F m oy iT TUL SEA Lo Hurts TT F Wy in 444444444 Setting Selections available Input Off Voltage Temperature Humidity Range Voltage 20 50 100 200 500 mV 1 2 5 10 2 Temperature TC K TC J TC T TC R TC E TC B TC S Filter Line A5 50 500Hz EU Function Off On nen Measured Upper limit value Numeric value input yang Lower limit value Numeric value input EU output Upper limit value Numeric value input value Lower limit value Numeric value input Decimal point Select the display digit for decimal point 0 to 4 Unit selection Current length area volume speed acceleration frequency weight power pressure flow temperature Unit Selections vary depending on the selected units listed in the above User defined unit Text input Misc Span Upper limit value Numeric value input ceking Lower limit value Numeric value input Annotation setting Text input 31 characters max Waveform color setting Red Green Blue RGB 0 to 31 available for each color Perform Auto Zero ADJ gt Execute
10. 0 00 cee eee es 36 Setting the Date and Time 000 ads aa dade bebe Mees 37 How to Recharge the Rechargeable Battery o ooo 37 How to Set the Date and Time 0000 cee ees 37 Changing the Display Language 00 cee eee eee 38 ZR RX70 User s Manual a 12 3 SETTINGS AND MEASUREMENT Window names and functions 00 0 e ees 40 Key Operator an 44 COS EEC Doa rs a as sai NS 44 2 SPAN TRAGCE POSITION sicarios dada dd 45 OD SII ES AOU S285 rt sat E aba 46 COMEN ee re ay dt a ene gee ee ee ae 46 OYOQ sidra din ed dd dd e 47 6 Direction KEYS cotas oa o a 47 TENTER serieen ae dl e toa 48 8 FAST FORWARD keys KEY LOCK ooooococooooocoono eee 48 9 START STOP USB Drive Mode 0 0000 cc cee ees 48 MORREVIENWS A e Wy tert Sed eg ae 49 AAA SL wes tea ate A ae ee tS Goths A Geo on atte all 50 12 CURSOR ALARM CLEAR ovocitos db awe sie pews dubs e wee aks 51 Gol ir eens Spi eters e a Su Sie ae ao ie 52 CUA INNA ic dh tet ota ciety tally ded hah a de hes sim alee cb de aed go ae emcee eee A 52 Operation Modes vu xi tive bee ee ee ed 54 Cl tee RUNING ceii ta cas Baca Oe ee wee Brae oe enn oS Bae 54 ZCP UNN o ene ees ep ke e ee ene eee ke 99 3 Capturing and Replaying o oooooononnoa eee 55 APRO eii te a ee A ad 56 Setting Men s iia A a i 57 MAMP SeNi S e caia e Ra eea enara eeraa eeneg i 57 AIDATA SOMOS a o a e E 63 SERIOS SOMOS lc a
11. Average Displays the simple average value of data being captured Max Displays the maximum value of data being captured Min Displays the minimum value of data being captured Peak Displays the peak value of data being captured RMS Displays the effective value of data being captured The calculation formula is as shown below R M S 2D n D data n number of data e The calculation results are displayed in the Digital Statistical Calculation Display screen Switch to the Full Channels Statistical Calculation Display using the and keys For details see 6 Direction keys p 47 e Calculation will start upon power ON Pressing the START key to begin measurement will clear the calculation e The sampling speed for calculation corresponds to the speed set in the DATA menu However when the sampling speed is higher than 5ms it is set to 5ms de Setting Menus ZR RX70 User s Manual 3 TRIG Settings This menu is used to specify trigger conditions and alarm settings Fertormina iriga nd Alar ETimer Settings Timer Mode ls Trigger settings Start Source Stop Source Pre Trig RAM Only Repeat Hep int Timer Trig Information Y AAlarm Settings v al Setting Selections available Timer mode Off Date and Time Every Day Cycle Every Hour Cycle Date and Time Start side source setting Date January 1 2005 to December 31 2035 Time 00 00 to 23 59 Hour Minute Stop
12. Reset Auto Zero ADJ gt Execute ZR RX70 User s Manual Setting Menus 57 1ININIYSASVIN ANY SONILLAS e 58 Setting Selections available Logic and Pulse Off Logic Pulse Logic Off On Pulse Input Off Revolution counts Counts Inst Filter Off On Slope TH LL EU Function Off On Measured value Numeric value input EU output value Numeric value input Unit selection Current length area volume speed acceleration frequency weight power pressure flow temperature Unit Selections vary depending on the selected units listed in the above User defined unit Text input Switching displays Analog and Logic Pulse can be switched as shown below Display Logic Pulse Data 3 CH Hapat mange Filter EU Mis Mos ll 1 m ee ee ra Display Analog Data Bi Cogie rse irase aml CH Input Filter slope EU MESA cc Mme Be Ofi PULSE2 Oe o A OTe PULSES PUEDO FOr AF ofr PULSES PACO MM Mey Orie bal bal T bal bal bal bal bal bic Display Logic Pulse Data gt lt 4 Display Analog Data A screen switches with ENTER key Analog settings This screen allows you to set conditions for analog signals When selecting CH ALL at the Input and the Filter all channels are set to the same setting For the Range the chan nels which are set to same setting of the Input are set to same range setting For the all channels Span setting the channels which are
13. Starts a new line with CR LF codes LF Starts a new line with LF code CR Starts a new line with CR code 4 2 USB Setting Sets the USB ID number of the ZR RX70 Specify a number from 0 to 9 When you control more than one unit of the ZR RX70 with one PC assign a unique USB ID to each of them PERE You must restart MT100 after any change is made to a setting value Changes are applied upon restart ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 76 4 3 TCP IP Settings Specifies TCP IP settings used to connect the ZR RX70 to an Ethernet You must restart MT100 after any change is made to a setting value Changes are applied upon restart Setting items Description IP Address Sets the IP address of MT100 0 to 255 0 to 255 O to 255 0 to 255 Subnet Mask Sets the IP subnet mask of MT100 0 to 255 0 to 255 0 to 255 O to 255 Port Number Sets the port number of MT100 1024 to 65535 Gateway Sets the gateway of MT100 0 to 255 0 to 255 O to 255 O to 255 DNS Address 4 4 USER Settings Setting items User Sets the DNS address of MT100 0 to 255 O to 255 0 to 255 0 to 255 Description Specifies the user name You cannot set this item when Guest is selected Department name Specifies the department name You cannot set this item when Guest is selected Change Conds Setting Menus Switches between Guest User 1 and U
14. ZR RX70 to the ON side to turn on the power ZR RX70 User s Manual Connecting the Power Cable and Turning on the Power NOILVaVdadd ANY SMOAHO C Connecting the Analog Input Terminal This section describes how to connect the analog input terminal Terminal Configuration and Signal Types e Do not input signals to the screw type terminal and the BNC connector of the same channel at the same time BNC connector PS Screw toe Doing so may cause damage to the connected device terminals e Make sure that the signal input source is OFF before con ZR RX70 necting the cables in order to prevent electric shocks When applying voltage of 60V or above use available safety cable in order to prevent electric shocks e Set the input range for the voltage to measure before you connect the analog input terminal The maximum input voltage for the 20 mV to 1 V range is 30 VDC If you apply a higher voltage without changing the input range the data logger may be damaged POO OC EJE GO 00 O a 70 5 4 3 O 1 CE Screw type terminal BNC connector Low voltage teriminal The screw type terminal and the BNC connector are internally connected Data entered to either of them can be measured If you use plobe use one with attenuation rate 1 1 e Connectin
15. cable to ground The ground cable is not provided as a standard accessory and must be prepared separately Recommended Cord Diameter AWG18 UL1007 4 Plug the AC cable into the mains power outlet 5 Press the power switch on the ZR RX70 to the ON side to turn on the power Connecting the Power Cable and Turning on the Power ZR RX70 User s Manual Connecting to a DC Power Supply Use the optional DC cable ZR XRD1 option APS A m a a e Important e Be sure to use the separately sold DC cable ZR XRD1 e Do not apply voltages exceeding the rated voltage 8 5 to 24 VDC e Connect the GND terminal for safe measurement The ZR RX70 must also be grounded when sharing a common ground level with other devices e Be sure to check the polarity of the power supply when connecting the DC cable 1 Configure the tip of the DC cable ZR XRD1 option 2m to enable it to be connected to the DC power supply 2 Connect the DC cable connector to the power supply connector on the ZR RX70 Shielded lead side White side DC cable ZR XRD1 option 3 Using the flat blade screwdriver press against the minus button above the GND terminal while connecting the grounding cable to the ZR RX70 Connect the other end of the cable to ground 4 Connect the DC cable to the DC power supply 5 Press the power switch on the
16. cooled down Charging temperature 15 to 35 C e If input is being made directly from the DC power supply instead of the AC adapter the DC voltage must be at least approx 16 V ZR RX70 User s Manual Using the Battery Pack ZR XRB1 Option 33 NOILVaVdadd ANY SMOAHO C Connect the and lead wires of the humidity sensor the ZR XRH1 option to the desired terminals and then insert the round connector into the 5V OUT connector on the ZR RX70 Do not use the sensor in a strong electrolyte environment Measured results may not satisfy to the stated Humidity sensor ZR XRH1 option Connect to the 5V OUT terminal Humidity sensor Es Connecting the Humidity Sensor Option ZR RX70 User s Manual Please be sure to read the following carefully in order to prevent electric shocks or shorts e Do not apply voltage of 60 Vp p or above between the analog input terminal and main unit GND terminal or between analog input terminals e Be sure to use only the AC adapter provided as a standard accessory The rated power supply range for the adapter is 100 to 240 VAC and the rated frequency is 50 60 Hz Do not use any other voltages LT For details see Connection Diagram p 25 ZR RX70 User s Manual Precautions to Observe When Performing Measurement NOILVaVdadd ANY SHOSHO C Noise Countermeasures Connect the ground wire in the following method if the measured
17. in the same manner to change the TRACE for X Y channels 3 and 4 to OFF Clear the screen just in case Press the CH SELECT key to move the cursor to the CLEAR and then press the ENTER key The CLEAR serves a similarly function to paper change for the X Y recorder dedicated machine The paperless ZR RX70 adopts a means of clearing the waveform on the screen instead of changing recording paper 8 Press the QUIT key to return to the previous display Capturing is not yet started Since the pen has been moved up yellow dots are moving but the path doesn t remain on the screen SPENT UP emer ies 1 CHL 0 694 0 741 2 OFF OFF Off Off 4 OFF OFF SAMPLE ims CLEAR Enter 96 X Y Measurement Example ZR RX70 User s Manual 9 Press the START STOP key to start capturing and move down the pen The dotted path is dis E A AEM MIF 16 50 46 l 0 741 z y r OF IFF DFF 4 OFF Off SAMPLE ims CLEAR Enter 97 ZR RX70 User s Manual X Y Measurement Example 1ININIYSASVIN ANY SONILLAS 98 Example 2 Overlay the data on the previously captured data to compare their waveforms The following is the method to compare waveforms by overlaying data on the previously captured one This is useful when you want to judge pass fail by waveform comparison This is not the function of pass fail judgment automatically performed by the ZR RX70 1 Press the DISPLAY key thr
18. in this item are those of the type selected in Select To set a unit not displayed in this item define an arbitrary character string in User Defined Unit The setting made in this item is displayed in User Defined Unit 6 User Defined Unit Setting Menus Selects the converted unit which can be specified as a user defined character string consisting of alphanumerics O For details on text input see p 88 The settings made in Select and Unit are reflected here ZR RX70 User s Manual e If a message appears follow the instructions by reducing the number of digits to be output by one or leaving the number of digits as is and changing the EU value e The Scaling operation is calculated using a ratio of the Meas Value or EU Output Value settings is displayed when the converted value cannot be processed by MT100 Span may be changed according to the value set for Scaling 2 DATA Settings This menu is used to specify setting items related to capture and calculations lt Capturing data to the internal RAM gt lt Capturing data to the internal flash memory or USB memory gt o aa MEM Se Ee aes DATA gt A aking data capture calculation setti Record Settings Sampl ing nJ X Sa oh Capture des Int flash mem File Name MEM ALTO GBD val Capture Time Approx hirsmSes A ure Space 245 5 MBytes 3992 e Blstatistical Calculation
19. is used login is automatically performed using an anonymous account and the files become read only files The following operations cannot be performed for read only files e Upload file e Delete file folder e Create file folder e Change file name folder name To enable data to be written to the ZR RX70O the login account name must be changed Please use the following table as a guide Account name Password Restrictions RX70 None None rx70 None None Anonymous Any Read only The following procedure is used to change the Internet Explorer login account Go to the File menu and select Login As to open the login As dialog box L l ftp 1192 168 4 124f Microsol File Edit View Favorites Tools Login 4s Mew Work Offline Close J To log on to this FTF server type a user name and password FTF server 192 168 4 124 User name RX70 iw Password After you log on you can add this server to your Favorites and return to it easily FTP does not encrypt or encode passwords or data before sending them to the server To protect the security of your passwords and data use Web Folders OWebDay instead Learn more about using web Folders Log on anonymously Save password Enter the account name in the User Name box leave the Password box blank Finally click the Login button ZR RX70 User s Manual WEB Server Function 105 1ININIYSASVIN
20. mee toe och eee ober oe bw eet rot Sie tee 118 List of File Error Messages 2 0 0 cece eee eee eens 119 e esis es vec RARO 121 REVISION MISCO is eh os ee a eae eee tae oe 124 ZR RX70 User s Manual 13 SLNALNOO ZR RX70 User s Manual GENERAL DESCRIPTION This chapter provides a general description of the ZR RX70 and its features Overview 16 Features 17 Operating Environment 18 The ZR RX70 with color monitor and internal memory are compact lightweight 8 channel data loggers ZR RX70 are also equipped with an internal flash memory to store data and enable the direct capture of a large volume of data to USB memory Furthermore the data loggers are equipped with USB and Ethernet interfaces to a PC to enable system configurations according to your application The Ethernet feature includes WEB and FTP server and NTP client functions which allow monitoring from a remote location data transfer and automatic time synchronization ES Overview ZR RX70 User s Manual Features Input e The input terminals come in two types easy to connect BNC connectors and M3 screw type terminals which facili tate wiring of thermocouples e All channels are isolated enabling measurement of signals of different references Display amp Operation e With the ZR RX70 s 5 7 inch TFT color liquid crystal display you can confirm the waveforms of measured data and each channel s settings at a glance e Ea
21. mode If the ZR RX70 does not return to local mode press the QUIT key 7 Clock display Displays the current date and time O For details on the date and time settings see p 78 8 AC battery status display 9 Digital display If the power is cut due to a power failure or a dead battery while data is being cap tured the data being captured will be lost Pay attention to the remaining battery level Running on the AC or DC power source Running on the battery The battery level is high Running on the battery The battery level is middle Running on the battery The battery level is low Running on the battery The battery is nearly out Displays the input values for each channel The SPAN TRACE POSITION key is used to change the display The Y and A keys or the CH SELECT key can be used to select the active channel enlarged display Moreover the selected active channel is displayed at the very top of the waveform display li a Displays the input values The input channels to be assigned can be changed using X Y Display ES The span of the active channel can be changed using lt and gt keys TRACE The position of the active channel can be changed using lt and gt keys MIE The display of the active channel can turned ON and OFF using lt and gt keys O For details see p 45 10 Quick settings 11 Alarm display ZR RX70 User s Manual Displays items that can
22. of ZR RX70 Digital scssindiontseacassnceneacueisudcedonce Displays the ZR RX70 measured value digitally Download of device file Allows data captured with ZR RX70 to be downloaded to your PC via FTP OMRON Web site Accesses to our Web site ZR RX70 User s Manual WEB Server Function 101 1ININIYSASVIN ANY SONILLAS Remote key operation To operate ZR RX70 from a remote location click the corresponding ZR RX70 panel keys on the screen 3 OMRON ZR RX70 Microsoft Internet Explorer jer Fie Edi View Fivorbes Took Help gt Q O 011 Ps rre hos E 3 2 a dress dE http 192 168 0 1 index html Remote key operation om RON POWER START CHANGE ZR RX70 ACH SELECTY SPAN TRACE HENO AMP DATA TRIG OPT UTA Noe aa MEM USE POSITION Display Logic Pu jata E 4 TIME DIV gt CH Input ange Filter EU Misc AL hrg FILE CURSOR DISPLAY NAVI REVIEW PORTABLE MULTI LOGGER Screen update rate 2sec y KEY LOCK PASSWORD irte KEY LOCK ioococcccccccccccnccncnncnnos Sets and cancels key lock PASSWORD coooocccccccoccconcccnnnns Sets and cancels the password 102 WEB Server Function ZR RX70 User s Manual Zoom J OMRON ZR RX70 Microsoft Internet Explorer Fle Edt ew Fiverbis Took Help ELS Ta Lj Ph uddresy E http 192 168 0 1 index html MHENU D Zoom A 1 P Digital Downiosd ol La bron Los CH SELEG Pee reenter ener DIS eC stanis ZR RX70 User s Manual
23. output Analog signal input terminals o o g Po g Co aco 0 0 o 9 9 o O oo O 0 9 oo Battery cover Contains battery packs ZR XRB1 Option sold separatel o oro ro o ro oo ro o oo otto ota apago 000000000000000000000006889888 O O E EOL 000000000000000000000000000D0 Stands Before using the stands read the precautions provided in Operating Environment BA See p 18 Part Names and Functions ZR RX70 User s Manual Connecting the Power Cable and Turning on the Power This section describes how to connect the power cable and turn on the power The connection method will vary depending on the type of power supply used Connecting to an AC Power Supply Use the AC cable and AC adapter that are provided as accessories Be sure to use the AC cable and the AC adapter that are supplied as standard accessories Connect the GND terminal for safe measurement The ZR RX70 must also be grounded when sharing a common ground level with other devices 1 Plug the AC cable into the AC adapter ZR RX70 User s Manual Connecting the Power Cable and Turning on the Power 21 NOILVaVdadd ANY SMOAHO C 3 Using the flat blade screwdriver press against the minus button above the GND terminal while connecting the grounding cable to the ZR RX70 Connect the other end of the
24. set the date and time at the Date Time Settings sub menu LT For details see 5 8 Date Time p 78 EMG APARTE ET OTHR RENE LED brightness E Screen Saver ay Power On Start DSS Room Temp DEUE Temp Unit Background Color ac Confirm start stop n Date Time Y Language ETT MOST Y Return to default settings E eno eee Game Date Time 7 Infor Internet Time W je e Sets LTle LUTITENL dale dana Lil A ee Date A a ES Time Toe Ole 25 ZR RX70 User s Manual Setting the Date and Time 37 NOILVaVdadd ANY SMOAHO C You can choose the language displayed on the screen The default display language is set to English when the ZR RX 70 is shipped overseas ZR RX70A Japanese ZR RX70A E U B CHRO English LT To change the display language see the instructions in OTHR Language Es Changing the Display Language ZR RX70 User s Manual SETTINGS AND MEASUREMENT This chapter describes the setting and measurement procedures for the ZR RX70 Window names and functions 40 Key Operation 44 Operation Modes 54 Setting Menus 57 X Y Measurement Example 95 WEB Server Function 100 INAWSYNSVAW ANY SONILLAS Window names and functions 1 Simplified message display 3 USB memory access display 2 Time DIV 4 Internal flash memory access display 5 Key lock lamp 6 Remote lamp Free ROTO seceDIV werserer ecg soe 8 AC Battery status display 7 Clock lamp
25. set to same range setting are set to same span setting 1 1 Input Selects input conditions Selection Description Off Disables the measurement of input signals and the waveform and digital display Voltage Used for measuring direct current voltages Temperature Used for measuring temperatures Humidity Used for measuring humidity with humidity sensor ZR XRH1 This selection sets the voltage range to 1V and disables EU settings Setting Menus ZR RX70 User s Manual 1 2 Range Specifies the range of signal input to be measured Input setting Selection Voltage 20 50 100 200 500mV 1 2 5 10 20 50 100 200 500V 1 5V Temperature TC K TC J TC T TC R TC E TC B TC S TC N TC W Humidity No selection Available SPAN Settings lt Voltage Ranges gt Range Maximum SPAN measurement range Minimum SPAN Minimum Resolution 20mV 22 000 to 22 000mV 0 200mV 0 001mV 50mV 55 00 to 55 00mV 0 50mV 0 01mV 100mV 110 00 to 110 00mV 1 00mV 0 01mV 200mV 220 00 to 220 00mV 2 00mV 0 01mV 500mV 550 0 to 550 0mV 5 0mV 0 1mV 1V 1 1000 to 1 1000V 0 0100V 0 0001V 2V 2 2000 to 2 2000V 0 0200V 0 0001V 5V 5 500 to 5 500V 0 050V 0 001V 10V 11 000 to 11 000V 0 100V 0 001V 20V 22 000 to 22 000V 0 200V 0 001V 50V 55 00 to 55 00V 0 50V 0 01V 100V 110 00 to 110 00V 1 00V 0 01V 200V 220 00 to 220 00V 2 00V 0 01V 500V 550 0 to 550 0V 5 00V 0 1V 1 5V 5 5
26. storage media ds Key Operation ZR RX70 User s Manual lt USB Drive Mode gt In USB Drive Mode the internal memory is recognized by the PC as external storage media With the internal memory recognized as a removable disk files can be easily transferred deleted or otherwise manipulated on it 1 Use a USB cable to connect the ZR RX70 and a PC 2 While pressing the ZR RX70 START STOP key turn the power ON 3 The external storage media is recognized by the PC and data exchange becomes possible In USB Drive Mode the display on the ZR RX70 is as shown below Keep pressing START STOP key until the display becomes as shown below USB Drive Mode USB Drive Mode in operaion Cannot perform key operation Important e To cancel the USB Drive Mode reboot the MT100 e All operations including data capture and replay will be disabled during USB Drive Mode 10 REVIEW This key is used to replay captured data e During Free Running replays the last captured data If no data has been captured yet because it is just after the power on no data is replayed a message No data captured comes up Sopp USE TAM 2000 04 17 ADIN WE PEE 14 08 40 M E 23 rarr b AI LEE EELE mumii LI T laa Es H 5 E a 5 E jl E x T pr HE ia T a While capturing data recently captured data is replayed data capture is continued ZR RX70 User s
27. system operation status in the simplified message display Operation Operation Operation Free Running Start up status or data is not being Free Running captured Capturing Data is being captured in the main Capturing to Internal RAM Capturing to Internal memory or USB device Flash Memory Capturing to USB memory Capturing and Replaying Data being captured is being replayed Capturing and Replaying Replaying Captured data is being replayed Replaying from Internal RAM Replaying from Internal Flash Memory Replaying from USB Memory Operation status transition START STOP key REVIEW key Free Running Capturing Replaying START STOP key When capture ends the screen Data cannot be replayed just after automatically switches to the power on or no data has yet been REVIEW key QUIT key replay screen captured Capturing and Replaying 1 Free Running AE re a sete REM 2 P4 2150 SAMPLE ims TER ZON dzone FE When in Free Running status you primarily set up the system to capture data You can check the current input signal as a waveform or digital values Operations available during Free Running Measurement parameters settings The MENU key is used to change various setting items in configuration menus SPAN TRACE POSITION The SPAN TRACE POSITION key is used to change settings Display mode The DISPLAY key is used to change the display mo
28. the file box on p 85 ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 6 3 Bitmap Save The ZR RX70 can save a screen copy of waveforms etc to a bitmap file This menu is used to specify the save destination file name etc of a bitmap file lt If the Name Type is Auto gt lt If the Name Type is User gt f i i O 1 T Ve 3 i i TE Folder Folder MEM File Name DEPRIDT EHR Name Type AU Name Type Si screen type WP Stress Screen type NATA ir mane Setting Description 1 Folder Specifies a folder to which you want to save data O For details see the file box on p 85 2 File Specifies a file to which you want to save data LT For details see the file box on p 85 3 Name Type Sets how a data file is named Auto Automatically gives a name to a file Example 20050101 123456_UG GBD Number part Date and time at which a file was created In this example the date is January 1 2005 and the time is 12 34 56 DSi User number for data capture UG Guest U1 User 1 U2 User 2 BMP winnisssicarioentwnen Data format Bitmap file User Captures data to a file with a user defined name 4 Screen Type Selects the type of the screen to be saved Full screen Saves the entire screen currently displayed This type cannot be used for X Y overlay Waveform screen Saves the waveform display area only the digital display area is not displayed To use X Y ov
29. the file box on p 85 ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 84 6 7 Next File Previous File Replays the previous or next file of the file being currently replayed The file order corresponds to the file display order set in the File Replay and Operation ascending order of name descending order of name ascending order of created date and time or descending order of created date and time can be specified This function allows search one folder above lt Hle Tree Structure image gt IMM Folder1 LJ Folder3 File File2 File3 me Thisfile can be LJ Folder4 File4 replayed sequentially File5 File6 J Folder2 Folders File7 6 8 Stop Auto Save Stops the auto save process being currently performed The file to which any data has been already written until stop will be retained 6 9 X Y Overwrite Overwrite the X Y image on a thumbnail size image of the captured data in the X Y Display screen as a background This overwrite function enables waveform comparison A thumbnail size image is automatically generated when the data capture destination is the internal flush memory or USB memory and saved in the same folder as the captured data the file format is BMP file Also the waveform screen saved to a bitmap file during replay can be used for overwrite OverurTTe BHF selection p Dverwrite clear E Setting Description 1 lma
30. values are unstable due to noise Connect the ZR RX70 s GND to ground Be sure to connect the chassis GND of the object to be measured It may become effective by ensuring that the chassis GND wire of the measurement object is connected to a good ground Measurement object ZR RX70 R1 Thermocouple Input terminals Connect the signal chassis GND and the ZR RX70 s chassis GND Use a short thick lead to connect the chassis GND of the measurement object to the ZR RX70 s chassis GND It will become even more effective if the ground potentials are the same Measurement device chassis ZR RX70 In the AMP Settings menu set Filter to any setting other than OFF Noise Countermeasures ZR RX70 User s Manual Setting the Date and Time If you are using the ZR RX70 for the first time charge the internal rechargeable battery and then make the date and time settings If the ZR RX70 is not used for a period of approximately six months the internal rechargeable battery may be dis charged and the date and time may revert to the initial settings If this happens recharge the battery before using the ZR RX70 How to Recharge the Rechargeable Battery Using the AC adapter provided connect the ZR RX70 to a mains power outlet turn on the power switch and then leave the ZR RX70 connected for at least 24 hours How to Set the Date and Time Press the MENU key display the OTHR screen and then
31. 00 75 5 SNOILVOlsIOAdS y ZR RX70 User s Manual External Dimensions MEMO External Dimensions ZR RX70 User s Manual APPENDIX Error Messages and Countermeasures 118 Index 121 Revision History 122 118 Error Messages and Countermeasures List of Error Messages This section outlines the error messages that are displayed and the countermeasures for those messages Display Can t adjust zero voltage Details Cause When the input voltage is over 0 point adjustable range it is displayed Countermeasure Please adjust the input voltage within 10 of of a set range Data was not captured When the logging file that is not recorded by as much as one point is replayed it is displayed The error occurs before detecting the trigger by the file that stops logging Please start the data logging The replay file name has not been spec ified When the replay is executed without selecting the file it is displayed Please select the logging file The replay file name is the same as the save file name p range When the logging file and the saved file are selected by the same name when it preserves between c
32. 00 to 5 500V 0 050V 0 001V lt Temperature Ranges gt Range Maximum SPAN Minimum SPAN p p Measurement Range K 270 to 2000 C 50 C 200 to 1370 C J 270 to 2000 C 50 C 200 to 1100 C T 270 to 2000 C 50 C 200 to 400 C R 270 to 2000 C 50 C O to 1600 C E 270 to 2000 C 50 C 200 to 800 C B 270 to 2000 C 50 C 600 to 1820 C S 270 to 2000 C 50 C O to 1760 C N 270 to 2000 C 50 C 0 to 1300 C W 270 to 2000 C 50 C 0 to 2000 C lt Humidity Range gt Range ZR RX70 User s Manual Maximum SPAN Minimum SPAN p p Minimum Resolution 0 1 Minimum Resolution 0 1 C Setting Menus 1ININIYASVIN ANY SONILLAS 1 3 Filter Specifies the filter setting Use the filter when there is noise in the input The filter is a low pass filter Selection Description Off The filter is disabled Line The cutoff frequency is 1 5 Hz SHz The cutoff frequency is 5 Hz 50Hz The cutoff frequency is 50 HZ 500Hz The cutoff frequency is 500 Hz 1 4 EU Scaling Converts the measured signals to other units Meas Value EU Value Setting Description 1 Function Sets the function to ON or OFF 2 Meas Value Sets the upper and lower limits of the numeric value to be converted Upper and Lower Limits 3 EU Output Value Sets the upper and lower limits of the output value after conversion Upper and Lower Limit
33. 10ms It may exceed 10ms in some network environ ments ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 6 FILE Menu Performs file related operations The items displayed vary depending on the operation mode LT File replay is explained in detail on p 54 When the data in the internal RAM is being replayed Next File and Previous File are not displayed lt Free Running gt lt Replaying gt o cake fit Mem Repaying 10d mesrDIU Coe ae USS gt iii el E Mom fon REE mylia u u Ce Ce Ce O 4 MF ile Operation Next File Prev File v1 File replay amp operation A eave q Save to Device PSEMP Copy y E i Bitmap save SEAR EVEL Load current settings jj 20 izo Execute ie dzone ls i File Operation File replay amp operation W DR eje mie q a gt TEMP Copy Bit ap Save hor witha ea il I a aa a m a u u le n pale SAMPLE E 2008 18 11 43 d ALARM TG WS DIY err 13 31 12 ee Sa a E Roam Se Stop Auto at w Role a an wires mlmm mml ae AA an ai 8 8 a a a 1 8 8 6 1 ME ies aa i Execute ET ims i ISEARC LEL JEL I izone E Oh zone a PAGE kk 35 UE GED ALARM TRF ile Operation File replay amp operation W x Y overwrite NY DA la e ao A A to n n m lie Load current settings SAME
34. 5 GPT Size of data that has been saved i See also 1 Simplified message display p 40 14 Scale lower limit Displays the lower limit of the scale of the currently active channel 15 Waveform display Displays the waveform of the input signal 16 Scale upper limit Displays the upper limit of the scale of the currently active channel 17 Data capture bar e During data capture Displays the elapsing time and the remaining capacity of the memory in use The progress of data capture is displayed with the bar in the background Capacity of memory available for data capture Size of data that has been captured Remaining memory capacity available Remaining capacity Elapsed time Remaining time available If the pre trigger is set to other than 0 and the size of captured data has not yet reached the level of the pre trigger the time remaining until it reaches the level of the pre trigger is displayed in yellow When the sampling interval is External the number of captured samples is displayed in green Capacity of memory available for data capture Indicates the capacity of free memory available for data capture at the start of data capture For example if 128 MB of 256 MB memory is already in use the remaining 128 MB is displayed If the data capture destination is the internal RAM the specified time avail able for data capture is indicated See p 67 The maximum value is 2 GB per
35. 50 Hz 500 Hz Attenuation 3 dB 6 dB oct Withstand between input 1000 Vp p 1 minute voltage channel ter minals between input 1000 Vp p 1 minute channel ter minal GND Insulation between input At least 50 MQ at DC500 V resistance terminal GND ate Standard Specifications ZR RX70 User s Manual Item ZR RX70A External Number of Input Trigger input 1 ch or External sampling input 1 ch a edad Logic input 4 CH or Pulse input 4 CH Selection method sections Output Alarm output 4 CH Input voltage 0 to 24 V single ended ground input specifications range Threashold Apporx 2 5 V voltage Hysteresis Apporx 0 5 V 2 5 V to 3 V range Alarm Output format Open collector output 5 V 10 KQ pull up resistance output 4 Contact capacity 5 V to 24 V 100 mA or below Output Level judgement window judgement logic pattern judgement pulse conditions judgement Judgement 5 ms interval Clock accuracy 5 Network Time Setting Off 0 002 accurate within about 50 sec onds per month Network Time Setting On 0 01 accurate within about 8 6 sec Operating environment onds per day maximum error after syn chronization O to 40 C 5 to 85 R H 15 to 35 C when the battery is used Power supply 6 AC adapter AC100 to 240 V 50 to 60 Hz DC input DC8 5 V to 24 V Battery pack DC7 4 V 2200 mAh Power consumption When the AC When the LCD is ON 30 VA 42 VA during battery rechar
36. 6 3 TIME DIV 4 MENU Key Operation Press the TIME DIV key to change the time axis display range However when the sampling interval is External External is displayed in the red box and this key is inoperative Free Running O ee SAMPLE ims n ONE izone ALARM Ti 21314 This key is used to change the colors of the waveforms in the X Y screen LT p 95 Open the settings window to capture data Menus HENO SP TATA TRIG OPT DOTA 009 0521 08M 058 Di spl p Logic F ulse Data E GH input Range Filter Ay O Oy AT SC t 7 for ll T I wl i ll m i F For details on settings see Setting ZR RX70 User s Manual 5 QUIT The key is primarily used for the following operations e To cancel a setting during menu configuration e To return to the MONITOR window when the SPAN TRACE POSITION window is dis played e To cancel remote status in which keys are disabled through interface control e To close the menu screen e To quit data replay 6 Direction keys These keys are primarily used for the following operations e To move in a menu or between setting items during menu configuration e To move the cursor during replay e To move the active channel in the Waveform Digital screen or X Y screen A and V7 keys To change the setting of SPAN TRACE POSITION lt and gt keys e To change the quick settings lt j and gt k
37. AGES LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS WHETHER SUCH CLAIM IS BASED IN CONTRACT WARRANTY NEGLIGENCE OR STRICT LIABILITY Further in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted Terms and Conditions Agreement ZR RX70 User s Manual Application Considerations Suitability of Use Omron Companies shall not be responsible for conformity with any standards codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product At Buyer s request Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product machine system or other application or use Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application product or system Buyer shall take application responsibility in all cases NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS AND THAT THE OMRON PRODUCT S IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM Programmable Produc
38. AN TRACE POSITION Switches the display in the digital display Used to change the settings related to waveform display during Free Running when stopped data capture and data replay Pressing this key will switch displays as shown below POSITION 2008 04 10 ma 2008 04 10 15 13 05 15 13 11 SPAN MONITOR bP H mcin A TA DO AA AIN AIN a Gi Li ALA oo at am am f ed am ee l am st kon DE kon DE hon DE hon DA kon DA honi DA kom 3 a q 1 A a al if 00 mw La Ea a am N SAMPLE img spot ZONE Lzone SOHC i Ln Ln ae k SAMPLE ims ZONE 1zone ONE POE SONE oo ALARM ie ALARM 11121314 ALARM 3 4 Displays digital values Allows changing of the span Allows changing of the position Allows turning ON OFF of default status value waveform amplitude waveform up down position the waveform display e Channel change VA CHSELECT keys Channel change VACHSELECT keys Channel change VACHSELECT keys e Amplitude range change lt i gt keys Display scale change lt I gt keys e Display Hide change lt D keys e Change range 8 voltage levels e Change range In steps of 10 of e Change range ON OFF 6 temperature levels the range At OFF data is captured all the same When ALL is set setting values for CH1 is reflected on other channels When CH1 is OFF ALL cannot be set ZR RX70 User s Manual Key Operation 1ININIYSASVIN ANY SONILLAS 4
39. ANY SONILLAS MEMO 108 WEB Server Function ZR RX70 User s Manual SPECIFICATIONS This chapter describes the basic specifications for the ZR RX70 Standard Specifications 108 Accessory Option Specifications 113 External Dimensions 115 Standard Specifications Standard Specifications Item ZR RX70A Analog Input method All channels isolated input Imbalanced input Simultaneous sampling of input all channels section Input terminal shape 1 BNC terminal For volate measurement M3 screw type terminal For voltage temperature termocouples mea surement Number of input channels 8 CH Maximum sampling speeds 10 us A D resolution 16 bit Measurement Voltage 20 50 100 200 500 mV 1 2 5 10 20 50 100 200 500 V 1 5 V F S ranges Temperature K J E T R S B N W WRe5 26 Thermocouples Humidity 2 0 to 100 Voltage 0 to 1 V scaling conversion Maximum between 20 mV to 1 V 80 VDC input voltage input terminals 2 V to 500 V 500 VDC between input 60 Vp p channel ter minals between input 60 Vp p channel ter minal GND Reference contact 1 0 C compensation accuracy 3 Input impedance 1 MQ 5 Allowable signal source 1 KQ or less resistance Common mode rejection ratio At least 90 dB 50 60 Hz signal source 300 Q or less S N Noise 20mV range At least 40 dB Other range At least 50 dB Input filter OFF Line 5 Hz
40. Big LEA TIA PRRSTOPERTE t 5elect A gt Forward QUIT JExit e Operation Operation mode Description Operation method Text input A Upper case alphabet mode When the cursor key is moved to the uppermost part operation 5 E E ET can be selected using the left right key p After selecting an operation use the down key to move the cur 0 Numeric mode sor to the desired character Symbol mode Delete mode Y Insertmode OK Finalize mode When selecting Text used for each operation When you bring the cursor to a character and press ENTER operation the character is entered After you finish entering characters move the cursor to OK and then press ENTER ec Setting Menus ZR RX70 User s Manual 9 Data Replay Menu When you press the MENU key during replay the Data Replay Menu is displayed 3 7 Sa MENOS cursor Position Move to First E E Move to Center 2 Move to Trigger P Hove to Selected le OTT ngs local Tf Prev Search E ist ical Calculation E ME Moves the currently selected cursor to the position of the first data Setting Selections available Cursor Position Move to First Data gt gt Execute Move to Last Data gt gt Execute Move to Center gt Execute Move to Trigger Position gt Execute Move to Method Position Time Selected Position Move to From O to Last Data Position For example the position is up to 9999 ms if the sam
41. GND terminal for safe measurement This product must also be grounded when sharing a common ground level with other devices 4 Warm up e For stable measurement wait at least 30 minutes after turning on the power supply before using 9 Handling e Be sure to take backups of captured data in your PC The captured content may be altered or lost due to misuse or malfunctions during usage e Do not drop or apply strong impact or force to the product It may cause malfunction of the monitor or the main unit 6 Maintenance e Do not use thinner benzine acetone or kerosene to clean this product e Calibration should be performed periodically to maintain measurement accuracy ZR RX70 User s Manual Checking the Accessories Item Standard Set ZR RX70A Remarks Quantity Main unit 1 AC adapter AC cable 1 User s Manual this manual 1 Utility disk CD ROM 1 e Specal PC software Wave Inspire RX tryout e Basic PC software Smart Viewer RX70 e User s Manual PDF files this manual e Wave Inspire RX Software Manual PDF files e Smart Viewer RX70 Software Manual PDF files ZR RX70 User s Manual Editor s Note E Meaning of Symbols Menu items that are displayed on the ZR RX70 s LCD screen and windows dialog boxes and other GUI oon elements displayed on the PC are indicated enclosed by double quotes E Visual Aids Indicates points that are important to achieve the full product perf
42. L Img 6 1 File Replay and Operation Replay data or operate files in the internal flash memory or USB memory LT File replay is explained in detail on p 85 a Setting Menus ZR RX70 User s Manual 6 2 Data Save Save data remaining in the internal RAM to the internal flash memory or USB memory lt If the Name Type is Auto gt lt If the Name Type is User gt as ave Le EEEE Einar Ger F Name Type a a Sal TY 7 1 pe File Type os Name Type AUTO Folder TE Folder HEM File Hame es im Cancel Setting Description 1 File Format Sets the file format in which you want to save data GBD Creates a data file in Omron proprietary binary format Prevents tampering of data CSV Creates a data file in a text format Cannot be replayed on the ZR RX70 2 Name Type Sets how a data file is named Auto Automatically gives a name to a file Example 20050101 123456_UG GBD Number part Date and time at which a file was created In this example the date is January 1 2005 and the time is 12 34 56 UG A User number for data capture UG Guest U1 User 1 U2 User 2 GBD uucriramia Data format GBD Binary format CSV Text format User Captures data to a file with a user defined name 3 Folder Specifies a folder to which you want to save data LT For details see the file box on p 85 4 File Specifies a file to which you want to save data LT For details see
43. Manual Key Operation 1ININIYSASVIN ANY SONILLAS 50 11 DISPLAY This key is used to switch the window mode Key Operation You can switch the window mode during Free Running when stopped and Capturing Pressing this key switches the window display as follows i t E j t lt Waveform Digital Screen gt Displays waveforms and digital values This is the default screen when the ZR RX70 is powered on The screen settings can be changed by using the SPAN TRACE POSITION key lt Expanded Waveform Screen gt Displays only waveforms in a magnified view in full screen mode lt Digital Calculation Display Screen gt Displays digital values and calculation results in large text The calculation settings can be made using the DATA menu LT For details see p 63 Press the lt j and gt keys to change the number of channels displayed The calculation results are displayed only when the Full Channels Statisti cal Calculation Display is selected LT For details see p 47 lt X Y Display Screen gt Supports four channel X Y display Any given channels can be specified for X axis and Y axis The settings can be made using the SPAN TRACE POSITION key the pen can be moved up and the screen can be cleared LT For details see p 95 ZR RX70 User s Manual 12 CURSOR ALARM CLEAR This key has different roles in different operation statuses lt When replayin
44. Max T R Y 5 090 5 9 Calc Settings 1 imes Calc settings 2 5 istical Calculation Calc settings 1 Pee Y alc Settings 2 PONIA RAM Fast record to volatile mem Flash USB Direct record from 1m3 Mi juto save data to internal flash i memory or USE memory Setting Selection 500ms 1 2 5 10 20 30s 1min External Data capture destination Internal RAM Internal Flash Memory USB Memory Internal RAM Number of capture points 10 to 1000000 Auto Save Off On On File Name See the following section on the data capture Internal Flash Memory File Name See the following section on the data capture or USB Memory Function 1 Off Average Max Min Peak RMS Function 2 Off Average Max Min Peak RMS Data capture file name Setting Selection Folder File Destination MEM USB1 Folder Text input if it is automatically named File Text input if it is user defined Name Type Auto or User File Format Binary GBD Text CSV ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 64 2 1 Sampling Interval Specifies intervals used to capture data Capture destination Selections available Internal RAM 10 20 50 100 200 500us 1 2 5 10 20 50 100 200 500ms 1 2 5 10 20 30s 1min External Internal flash memory 1 2 5 10 20 50 100 200 500ms 1 2 5 10 20 30s 1min USB memory 1 2 5 10 20 50 100 200 500ms
45. OMRON This manual not printed Portable Multi Logger ZR RX70 User s Manual Cat No 2283 E1 03 Introduction This manual provides information regarding functions performance and operating methods that are required for using the ZR RX70 When using the ZR RX70 be sure to observe the following The ZR RX70 must be operated by personnel knowledgeable in electrical engineering To ensure correct use please read this manual thoroughly to deepen your understanding of the product Please keep this manual in a safe place so that it can be referred to whenever necessary Registered Trademarks Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corp in the United States and or other countries Other product and company names herein may be either registered trademarks or trademarks of their respective owners Type of Manuals The manuals of the ZR RX70 series consist of the following Select the manual suitable for your purpose and read it before starting operation Manual packaged in the product brochure User s Manual this manual Information for safe and correct use Before use connection and wiring in details language change of display etc Procedure in details for setting and measurement Specifications of the ZR RX70 series and accessories Other information which is required for the use of the ZR RX70 series ee ee ee 4 Manuals contained in the util
46. PREE Entering an incorrect password will not cancel key lock Key lock state will be retained when power is turned off 2 Setting Menus ZR RX70 User s Manual X Y Measurement Example Example 1 Measure the CH1 for X axis and the CH2 for Y axis Measurement examples when specifying CH1 for X axis and CH2 for Y axis are described below Only the X Y channel 1 is displayed with orange line 1 Press the DISPLAY key three times to open the X Y Display screen Free Running AT PEN UP Free Running AT PEN UP MEE PAS 2008 11 12 1 Lalau ie EEE E REPT IFFT 1b EEE MEE POS 2008 11 12 CHL 0 1 0 1 0 O Ba y H i 4 Ba y Se 4 Bi 4 Ba 4 ims Enter i e y O 0 8 48 Bi 4 4 a 1 a 1 4 4 ims Enter You can set the colors of the waveforms colors of X Y channels displayed on the X Y Display screen but not change those on the Y T screen 3 Press the SPAN TRACE POSITION key three times to select the TRACE Free Running Y PEN UP ZR RX70 User s Manual MEE PS 2008 11 12 MEMPTIAF 16 45 38 SAMPLE CLEAR ims Enter X Y Measurement Example 95 LINAWSYNSVAW ANY SONILLAS e 4 Press the CH SELECT key to move the cursor to the X Y channel 2 MEE m 2008 11 12 MEMPFIAF 16 45 59 l TRACE On CHA Un CHS On SAMPLE ims CLEAR Enter AE E TRACE On Cc OFF CHS E 4 On SAMPLE ims CLEAR Enter 6 Repeat steps 4 and 5
47. RMS Number of operations Maximum of 2 can be set simultaneously during data recording Maximum of 5 can be set simultaneously during data replay Data between cursors specified during data replay Method Standard Specifications SNOILVOlsIOAdS y Item ZR RX70A Other Search functions Function Search the captured data for the required number of points functions Search type Search of channels by levels Search by logic pulses combinations Search by alarm generation Annotation input Function A comment can be input for each channel function Supported characters Alphanumeric and kana characters Number of characters 31 Up to 8 characters are displayed Trigger Timer mode Off Date and Time Every Day Cycle Every Hour Cycle Functi ps Repeat trigger Off On Trigger types Start Data capture starts when a trigger is generated Stop Data capture stops when a trigger is generated Trigger settings Start Off Level External Time Stop Off Level External Time Level Analog TH 4 L Window IN Window Out Tolerance 1 judgment modes Logic TH JL Pulse TH 4L Window IN Window Out Trigger accuracy 1 of the range Channel Level OR Level AND Edge OR Edge AND combinations Pulse input Revolutions mode Function Counts the number of pulses per second and multiplies it by 60 to setting display an rpm value 50 100 200 500 1k 2k 5k 10k 20k 50k 100k 200k 500k 1M 2M 5M 10M 20M RPM F S Span Cou
48. Threshold level Approx 2 5V Hysteresis Approx 0 5 V 2 5 to 3 V Switch between logic and pulse input Internal Equivalence Circuit 5V tow 10KO Comparator LOGIC PULSE n GKR j 2P0KO GND _ Logic Alarm Cable Connection and Functions ZR RX70 User s Manual External trigger sampling Specifications Item Description Number of input channels 1 Input voltage range O to 24V max single ended ground input Threshold level Approx 2 5V Hysteresis Approx 0 5 V 2 5 to 3 V Internal Equivalence Circuit 5 Y 5 10K Comparator l 68KQ TRIGGER 220K0 GND ws Alarm Output Specifications Item Description Number of input channels 4 Output format Open collector output 5 V 10 KQ pull up resistance Contact capacity 5 V to 24 V 100 mA or below Internal Equivalence Circuit and Example of Wiring Connection 5 Y External Connection Example Necessary when induction load occurs such as Relay 25C2411K DG 52410 ZR RX70 User s Manual Logic Alarm Cable Connection and Functions 27 NOILVaVdadd ANY SMOAHO C 28 Wiring Cable tips are bare tips Perform wiring for the necessary functions Signal Name Logic Pulse input Channel Number 1 Wire Color Orange with red dotted line 2 3 4 Orange with black dotted line Grey with red dotted line Grey with black dotted line Alarm output External trigger sampling input White with red dotted lin
49. V CH 1 Scaling 1 gt A AN 20 00 rpm J i 1 5 Misc Span settings x nnotation Strings MA E Waveform color Perform Auto zero ADJ E Reset Auto Zero DJ E set zero Point as 0 0 Sn Setting Description 1 Span Sets the upper and lower limits of the span in which waveforms should be displayed 2 Annotation Sets an annotation comment to be displayed for each channel The annotation can be 31 characters long at the maximum You can use alphanumeric and kana characters and symbols LT For details on text input see p 88 3 Waveform color setting Red Green Blue RGB 0 to 31 available for each color 5 Reset Auto Zero ADJ Cancels the zero position voltage value and displays the input voltage 4 Perform Auto Zero ADJ Performs calculation using the current input voltage as the zero position voltage value 6 Zero Position Voltage Displays the zero position voltage value display only Value Logic and Pulse settings Specifies the digital input settings 1 6 Logic Pulse Selects the digital input processing method Setting Description Off Disables the measurement of digital input Logic Digital input is processed as logic signals Pulse Digital input is processed as pulse signals ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 62 1 7 Input Sets the pulse measurement mode This item can be set o
50. X70 User s Manual Features NOI1LdI4ISI10 IWYANAD L 18 Operating Environment This section explains the operating environment for the ZR RX70 LT See Precautions for Safe Use p 6 LT See Precautions for Correct Use p 7 Condensation occurs in the form of water droplets on the device surfaces and interior when the ZR RX70 is moved from a cold to a warm location Using the ZR RX70 with condensation will cause malfunctioning Wait until the con densation has disappeared before turning on the power Warming up Before Use The ZR RX70 should be allowed to warm up with the power turned on for approximately 30 minutes to ensure that it operates according to the specified performance Configuration When in Use Use the ZR RX70 standing upright or at an angle being set on the stand 90 degrees Standing upright Standing at an angle being set on the stands How to open the stands Do not block the air vent on the ZR RX7O0 as this will cause malfunctioning Measurement accuracy may not be satis factory if the system is used in a condition other than described above Use both the stands of the ZR RX70 when you use it at an angle Otherwise the unit will fall down Open both the stands before use as shown in this figure Operating Environment ZR RX70 User s Manual CHECKS AND PREPARATION This chapter explains how to check the ZR RX70 s external casing and accessories and how to prepare the ZR RX70 for
51. a specific point in time lt If the Method is Position gt lt If the Method is Time gt ce Att Ed T Method Position Method o MEM Move to Howe at 2006 05 28 14 16 37F Informat iori Informat iorn Start Point 0 ms start Point End Point 1999 ms End Point May 26 2008 14 16 33 Setting Selections available 1 Method Sets the method for specifying the moving destination Either Position or Time can be selected 2 Position Sets the moving destination as a relative position Specify how much later the cursor should be moved from the capture start assumed as 0 Only a point up to the end of data can be specified Check the setting range in the A part In the example in this figure the sampling interval is 1 ms the data capture destina tion is the internal RAM and the number of capture points is 20000 Since the first point of data is O ms only a position up to 19999 ms can be set 3 Time Sets the moving destination as a date and time Only a point between the start and the end can be set Check the setting range in the B part 9 6 Cursor Sync Sets a function that moves the two cursors simultaneously when you move them Selection Description Off The two cursors are not synchronized Only the specified cursor moves On The two cursors move in synchronization Cursor A is always the fulcrum Setting Menus ZR RX70 User s Manual 9 7 Level Settings The Level Setting
52. any sampling interval Specify this selection if you want to capture data at higher rates than 500 us This selection comes in handy for saving the memory space if you check the waveform of captured data first and save only necessary data Internal flash memory Captures the measured data to the internal flash memory The data once captured is retained even after the power is turned off This selection cannot be specified if the sampling interval is from 10 to 500us Select a sampling interval lower than 1ms Note Note Sampling intervals from 1 to 5ms cannot be selected when the capture file format is Text CSV USB memory Captures the measured data to the USB memory The data once captured is retained even after the power is turned off This selection cannot be specified if the sampling interval is from 10 to 500 us Select a sampling interval lower than 1 ms e Sampling intervals from 1 to 5ms cannot be selected when the capture file format is Text CSV e Large capacity USB memory can also be used The use of USB memory comes in handy when you want to capture data many times or the capacity of internal flash mem ory is not sufficient for long measurement Data up to 2GB can be captured per data capture You cannot use USB memory with a security function such as fingerprint authentication or with no shell metallic part in the connector area Data lost after power off Data retained after power off Measured data Savin
53. b browsers e Microsoft Internet Explorer 6 0 or later e Netscape 6 2 or later e Firefox 1 5 or later e Opera 9 0 or later Available functions using a Web browser e Operating ZR RX70 e Monitoring ZR RX70 display screen e Enlarging ZR RX70 display screen e Linking to FTP e Linking to our Web site Setting the URL The URL Uniform Resource Locator must be correctly set according to your network environment Follow the procedure below to access the ZR RX70 http IP address Index html e pene renee neon Protocol to access the server HTTP Hyper Text Transfer Protocol e IP address Type in the IP address of the ZR RX70 to monitor e index html File name This is fixed to Index html The port number can be omitted Set 80 to the port number if necessary http IP address 80 index html 100 WEB Server Function ZR RX70 User s Manual Procedure 1 Open the Web browser 2 Type in the URL http IP address Index html in the address input field Fie Edit View Favorites Tools Help Om uy E e JO search 3 7 Favorites A Media A X File Edi View Fiwerbes Toos Halip Eo Qu 112 fh Erh Yy rete Ges 4 O A iiie j http 192 168 0 1 index html w Ee ints a foom ih E Digital PORTABLE MULTI LOGGER Screen update rate 2sec y KEY Lock passworp iG Done M ermet Remote key operation Allows ZR RX70 operation A O Enlarges only the LCD screen
54. be easily set The V and A keys or the CH SELECT key can be used to make a Quick settings item active and the lt j and gt keys to change the val ues During Free Running in X Y display the pen can be moved up down and the screen can be cleared During data capture the SAMPLE item cannot be changed Displays the alarm output terminal status Turns red if an alarm is generated For the channel that generated the alarm the input value in the digital display turns red Window names and functions 41 1ININIYSASVIN ANY SONILLAS Item Description 12 Pen display Displays the signal positions trigger positions and alarm ranges for each channel Trigger position Alarm range UN NW NW NW Rising Falling Win In Win Out Stop position Start position 13 File name display Displays the data capture file name during the data capture operation If auto save is performed the progress of data save is displayed with the bar in the background Dis plays the data replay file name during the data replay operation Do not turn off the power while the simplified message is Capturing and Replaying Capturing to Internal RAM Capturing to Internal Flash Memory Capturing to USB Memory or Auto Saving Otherwise the captured data will be destroyed Make sure that the message is completely gone wait for 2 or 3 seconds before turning off the power Total size of data to be saved Ea 411 168s69_U6
55. ch Sets a channel to be assigned to the Y axis in each zone Trace Turns on or off the display in each zone Setting Menus On Turns on the display of waveforms Off Turns off the display of waveforms in this zone ZR RX70 User s Manual 9 12 Execute X Y for All Data Converts all the replay data to X Y display when executed 9 13 Execute X Y between Cursors Converts only the data between Cursors A and B to X Y display when executed 10 NAVI Menu The NAVI menu can be displayed in three modes Free Running Recording and Replay 1 50 3 IO A Enable Tite pr P Disable ke ll 4 ENT iF L L J SUD tus GED FEE FM Sree START ADT REIER SIOF Description of the Free Rumning keys Displays the key s tha ir pe E Sn in Free Running status z INAI to close H the screen ai creans fary with the operation Operation Description Open Pressthe NAVI key to open the NAVI menu Close Press the NAVI key to close the NAVI menu Browse explanation Explanation is displayed when an enabled key is pressed 11 Quick Settings Free Rong gt O ew rrr 13h but mp POSE PES 2008 04 14 gt PF 15 28 0h CH 1 4 Li 7 SAMPLE FEHUP Down gt SAMPLE ime EE CLEAR ZONE izone ALARM ZIAL Screen Operation mode Explanation Waveform Free Running lt p gt key can be used to change the sampling interval lt p gt key can be used to change the zone division
56. cted set the condition for each channel O See p 72 External Input Starts capturing data when an input signal is received from an external trigger terminal A trigger is generated when the voltage changes from 5V open to OV short circuit to GND Time Data capture starts after a specified length of time elapses after the START STOP key is pressed or the time specified for the timer function is reached gt When Time is selected set the time to start capturing data The actual timing conditions for data capture are related to the timer O See also Sections 3 1 Timer Mode p 70 3 3 Stop Side Source Settings p 71 and 3 7 Timer Trigger Information p 72 ue Setting Menus ZR RX70 User s Manual 3 3 Stop Side Source Settings Specifies trigger conditions to stop data capture Selection Description Off Stops capturing data unconditionally when the START STOP key is pressed or the time specified for the timer function arrives Level Stops capturing data when a specified level condition is met gt When Level is selected set the condition for each channel LT See p 72 External Input Stops capturing data when an input signal is received from an external trigger terminal A trigger is generated when the voltage changes from 5V open to OV short circuit to GND Time Stops capturing data after a specified length of time elapses after starting data capture gt When T
57. ction sA When you capture the data by Wavelnspire please finish all the other application software and save captured data to hard disk Even using the PC which fills enough specification the capture error occurs at times because the PC is bad condition For example the other appli cation software works or recording medium has no free area 2 Don t start up the other application software as Wavelnspire works And don t work other several operation For example screen saver virus scan program copying or moving files searching file etc ZR RX70 User s Manual Accessory Option Specifications ws 114 Battery Pack ZR XRB1 Option Specifications Item Capacity Description 7 4 V 2200 mAh Running time When using the LCD display Approx 2 hours When using the screensaver Approx 2 5 hours Battery type Charging method Lithium secondary battery Mount in the main unit ZR RX70 Time required for charging When one battery pack is charged Approx 4 hours When two battery packs are charged Approx 8 hours Switchover in the case of a power failure Operation environment By using the battery together with the AC adapter the power supply will be switched automatically to the battery in the event of a power failure 15 to 35 C Other functions When the battery is running low measured data is saved and the file is closed automatically When two battery packs are
58. de File operations The FILE key is used to perform file related operations Replay of last data captured last time The REVIEW key is used to replay captured data Data replay The FILE key is used to select data that you want to replay and replay it Operation Modes ZR RX70 User s Manual 2 Capturing Capture time Note is displayed Time of Capturing when the capture time is long a A VESES PERES 2008 04 16 1 sect Y MER 18 06 38 4 453 SAMPLE ims ONE dzone SEPT ALARM 1121314 Capture file name During data capture data is captured into the Internal memory or USB device You cannot use the MENU key to change the setting Operations available for change during capturing SPAN TRACE POSITION The SPAN TRACE POSITION key is used to change settings Display mode The DISPLAY key is used to change the display mode Capturing and Replayling The REVIEW key is used to replay captured data at the same time 3 Capturing and Replaying A Ll Sec DTU eo mo ee AA 1 This area displays voltages etc of points indicated by Cursor A or B or the selected cursor o SAA AMPLE ims S008 04 Th 14 07 2 Hee Z de indicated by Cursor A or B or the selected cursor This area displays measuring time etc of points You can replay data during capture You can use the Direction keys lt P gt to move the cursor to captured data to check digital values Operations available durin
59. e Sets the timer function When the timer function is used set to a selection other than OFF data capture is enabled only during the time for which the timer is set Selection Description Off The timer function is not used Data capture starts according to triggers Date and Time Data capture starts when a trigger is generated only during certain specified date and time gt When Date and Time is selected set the date and time both on the start and stop sides Every Day Cycle Data capture starts when a trigger is generated only during the same specified time every day gt When Every Day Cycle is selected set the time hour and minute both on the start and stop sides Every hour cycle Data capture starts when a trigger is generated only during the same specified time every hour gt Set the time minute and second both on the start and stop sides The actual timing conditions for data capture are related to triggers LT See also Sections 3 2 Start Side Source Settings p 70 3 3 Stop Side Source Settings p 71 and 3 7 Timer Trigger Information p 72 3 2 Start Side Source Settings Specifies trigger conditions to start data capture Selection Description Off Starts capturing data unconditionally when the START STOP key is pressed or the time specified for the timer function arrives Level Starts capturing data when a specified level condition is met gt When Level is sele
60. e White with black dotted line Yellow with red dotted line BR 0 N Yellow with black dotted line Pink with red dotted line GND Switch between logic and pulse Logic Alarm Cable Connection and Functions Pink with black dotted line 2 Grey with red dotted line 3 Grey with black dotted line 4 White with red dotted line White with black dotted line 1 2 Yellow with red dotted line ee 4 Shielded Orange with red dotted line 1 Orange with black dotted line Logic Pulse input Alarm output Yellow with black dotted line Pink with red dotted line External trigger sampling input Pink with black dotted line GND ZR RX70 User s Manual Attaching USB memory to the ZR RX70 allows you store measured data directly lt Specifications of supported USB memory gt e Power source 5 V e Power consumption 250 mA or below e Capacity No limit except each file must be within 2 GB You cannot use USB memory with a security function such as fingerprint authentication or with no shell metallic part in the connector area Inserting a USB Memory Attach the USB memory to the USB memory terminal NOILVaVdadd ANY SHOSHO C USB memory ZR RX70 User s Manual Attaching USB Memory EN Use the USB LAN Interface to connect the ZR RX70 to a PC Connection Using a USB Cable Use the USB cable to connect the ZR RX70 to a PC The USB connect
61. e setting is Level specify detailed conditions for each channel The overall structure of level triggers are as shown below Combi Trigger Alarm output n nation Pulse and Logic are toggled back and forth Pulse and Logic are toggled back and forth The Logics 1 to 4 are fixed to pattern comparison Specify an alarm output destination for Pulse and Logic for each channel The conditions are ORed for each alarm output destination Example Suppose CH1 and CH2 are set to Output 1 and CH3 and CH4 to Output 2 If either CH1 or CH2 meets the conditions Alarm Output 1 occurs If either CH3 or CH4 meets the conditions Alarm Output 2 occurs lt Trigger Level Settings gt lt Alarm Settings gt 2009 05 21 REA WEE 2008 05 21 TERE ER WSE 1e 04 Display logic pulse data B Alarm Hold On ki ICH Macie l er Output 1 7 ron j Tr AAA E Tr EA 0 000 5 000 Vv II 5 000 VE Level OR T Lower Leve Upper TIT y roe Y 0 000 5 000 VF 0 000 5 000 vF Zi A a a 4 El F E s 6 T T ar l Cancel MM Sets the combination of trigger conditions for each channel a Mame olds the generated alarm 55 CURSOR to clear the alarm Setting Menus ZR RX70 User s Manual Setting Description 1 Combination Sets the combination of trigger conditions set for each channel Level OR Starts stops capturing data when at least one trigger condition is met Each condition is a leve
62. e to ignition rupture or combustion Never disassemble deform under pressure heat or incinerate the lithium ion battery pack ZR XRB1 GRAPHTEC B 517 gt yO Hazard may occur from serious fire or electric shock Do not connect voltages exceeding the rated voltage to the signal input terminals Fire or hazard may occur in rare occasions from ignition rupture or combustion Do not use battery packs other than ZR XRB1 Hazard may occur from electric shock Do not remove the protection cap for unused BNC terminal Be sure to leave the cap supplied attached to this terminal Hazard may occur from electric shock Be sure to connect the terminal of this product to the cable first and connect the measurement object Injuries from electric shock may occur in rare occasions as the result of disassembly 2 bp gt Never disassemble deform under pressure or incinerate the main unit ZR RX70 User s Manual Precautions for Safe Use Be sure to observe the following items as they are very important to ensure safety 1 Installation environment e Do not store or use in locations where the temperature exceeds the rated range e Do not use in locations where the relative humidity exceeds the 30 to 80 RH range e Do not use in locations subject to steam e Do not use in flammable or explodable gas environment 2 Installation category e The ZR RX70 conforms to the IEC60664 1 installation category ll and mus
63. ection Description On Enables the confirmation message Pressing the START STOP key brings up the mes sage confirming whether you want to start or stop data capture Pressing the Enter key starts or stops data capture Off Disables the confirmation message Pressing the START STOP key immediately starts or stops data capture without displaying the message 5 8 Date Time Sets the clock of the ZR RX70 Sets the built in clock Date Time of the ZR RX70 If Network Time is set the clock of the ZR RX 70 is automatically adjusted via the network For details see Network Time Settings p 79 5 9 Language Sets the ZR RX70 s display language 5 10 Demo Waveform Mode Displays demo waveforms without analog signal input Selection Description Off Do not display demo waveforms On Display demo waveforms 5 11 Return to Default Settings Initializes the settings After initialization the settings are reset to the factory defaults Setting Menus ZR RX70 User s Manual 5 12 Game Games are available The score is stored for each user 5 13 Information Displays system information for the ZR RX70 Network Time Settings The ZR RX70 synchronizes the time of the built in clock with that of a time server via an Ethernet Time Zone OMT T 00 Synchronized Time Me mF Adjust Mode s Connect ion Test Setting Description Network Time Enables or disables this feature Off Disables th
64. ee times to display the X Y Display screen 2 Call up the past waveform image Press the FILE key Free Running Y O eee oo 2008 SERI as Fi le Operat ion E File replay amp operation EF BY overwrite MA E B 1 4 TESBHP Copy ad y Bitmap Save 7 E qa V PS ime Enter Free Running RT PEN UP eee mee amen m a POE ES CHA a CIE Operat ion gle replay amp operation 0 1 K Y overwrite m 7 B 1 6 E BHP select ion Y E 8 1 ims Enter Overurite clear E a i a la fe an Internal memory Cannot select Move folder X Y Measurement Example ZR RX70 User s Manual 5 Move the cursor to the image you want to call up using the A and V keys bce mee eee le ae pes 0038 12 11 En ect file folder MEM 08 12 11413_46_12 6 081211 134612 BMP ENTER Select AE Enter You can call up an image background not data Even if you try to change some settings such as SPAN after an image is called up they are not changed Press the START STOP key to start capturing The current image of waveforms is overlaid on the past one A A occ coe a Enter At this time only the current data is in fact captured ZR RX70 User s Manual X Y Measurement Example 99 1ININIYSASVIN ANY SONILLAS WEB Server Function This function allows operating and monitoring ZR RX70 via a Web browser Supported We
65. ending on the sampling interval i Setting Menus ZR RX70 User s Manual 4 OPT Settings This menu is used to specify conditions for PC connection and USER settings for switching between users The USER settings allow you to read out the stored setting conditions easily by switching between users Winter face USB ID IP Address aE Detailed e ZUser Settings HA Change conds Guest F User Guest Department Guest REO AAA TE OFT ma FOC OS MEMOS u Interface New Line Code USB Settings USB ID E E TCP IP Settings A screen switches E IP Address with ENTER key subnet Mask E Port Number Gateway DNS Ass Note Restart to enable USB TEP IF settings e Mantero W sets the New Line code Setting Selections available USB ID 0 to9 IP Address 0 to 255 0 to 255 0 to 255 0 to 255 Detailed Settings New Line Code CR LF LF CR USB ID 0 to 9 IP Address 0 to 255 0 to 255 0 to 255 0 to 255 Subnet Mask O to 255 0 to 255 0 to 255 0 to 255 Port Number 1024 to 65535 Gateway 0 to 255 0 to 255 0 to 255 0 to 255 DNS Address O to 255 0 to 255 0 to 255 0 to 255 Setting Condition Switching Guest User 1 User 2 User Text input when User is set Department Name Text input when User is set 4 1 End of Line Character Specifies a New Line code used when controlling with the I F command Selection Description CR LF
66. erlay in the X Y Display screen select this screen type 6 4 Execute Save a screen copy to a bitmap file LT For information on specifying the save destination see 6 3 Bitmap Save p 82 2 Setting Menus ZR RX70 User s Manual 6 5 Save Save the settings of the ZR RX70 lt If the Name Type is Auto gt lt If the Name Type is User gt dave Je Tt older POEMA gt MEN File Name DEFIENDE Hame Type So Name Type User Bii eile TRS Caricel Setting Description 1 Folder Specifies a folder to which you want to save data O For details see the file box on p 85 2 File Specifies a file to which you want to save data O For details see the file box on p 85 3 Name Type Sets how a data file is named Auto Automatically gives a name to a file Example 20050101 123456_UG GBD Number part Date and time at which a file was created In this example the date is January 1 2005 and the time is 12 34 56 US E User number for data capture UG Guest U1 User 1 U2 User 2 OND tesina Data format Settings file format of the ZR RX70 User Captures data to a file with a user defined name 6 6 Load Loads the settings of the ZR RX70 from a file Swart eas Aw dae ro pare Folder MEM File Hame heaps lo cia POAncel Setting Description 1 Folder Specifies a folder to which you want to save data LT For details see
67. even if it formats it might the media failure Repair ZR RX when a built in mem ory is failure Please use another USB memory when the USB memory is failure Disk I O Error 28 ZR RX70 User s Manual It is displayed by either of following cause e Disk is full e Neither the file nor the directory are created any further Disk is full is usually displayed Please increase the capacity of the disk as it erases an unnecessary file Error Messages and Countermeasures 119 XIQNAddV G MEMO Error Messages and Countermeasures ZR RX70 User s Manual Index A AC Power Supply Connecting 21 Alarm Hold Generated Alarm 73 Operations 74 Setting 72 ALARM CLEAR 51 AMP settings 97 Analog Input Measurement Accuracy 110 Annotation 61 B Battery Charging the Battery 33 Mounting the Battery Pack 32 Battery Pack 114 Bitmap Save 82 C Capturing Capturing 55 Data Capture Destination 65 Data capture file name 63 Repeated Capturing 71 CH SELECT key 44 Changing the Display Language 78 Configuration When in Use 18 CURSOR key 51 D Data Replay Menu 89 Data Save 81 DATA Settings 63 Date Time 78 Setting the Date and Time 37 DC Power Supply Connecting 23 Default Settings 78 Demo Waveform Mode 78 Department name 76 Direction key 47 Display Language 38 DISPLAY key 50 E Edge Operations 73 ENTER key 48 EU Scaling 60 62 ZR RX70 User s Manual G H K FAST FORWARD key Features File Box
68. eys e To change the setting of the channel to be allocated in the X Y screen lt j and gt keys e To change the number of channels displayed in the Digital Calculation Display screen lt and gt keys To change the channel displayed in the box on the Digital Calculation Display screen A and V7 keys 2 channel Display 4 channel Display 8 channel Display Full Channels Statistical Calculation Display ZR RX70 User s Manual Key Operation 1ININIYSASVIN ANY SONILLAS 7 ENTER This key is primarily used for the following operation e To finalize setting items during menu configuration or open submenus 8 FAST FORWARD keys KEY LOCK These keys are primarily used for the following operation e To move the cursor at high speed during replay e To change the operation mode in the file box e To set key lock Hold down the left right FAST FORWARD keys for at least two sec onds press again to unlock A password for canceling the key lock can be specified LT For details see p 94 9 START STOP USB Drive Mode This key is used for the following two operations lt Starting and stopping measurement gt e Starts capture during Free Running or replay e Stops capture during capture A MEE PERS anne 04 1 S67 DIV mem MIR 14 07 40 e Press this key while turning the power ON to access USB Drive Mode In USB Drive Mode the internal memory is recognized by the PC as external
69. file 2 GB is indicated if the capacity of free USB memory exceeds 2 GB Size of data that has been captured Indicates how much of the above memory is currently in use for data capture Remaining memory capacity available Indicates how much of the above memory remains available for data capture 42 Window names and functions ZR RX70 User s Manual Item Description 17 Data capture bar e During Data Replay Indicates the displayed position cursor position and trigger position Cursor A position Trigger point location Cursor B position Total size of captured data Current waveform display position e Waiting for timer Indicates the time at which the timer expires ZR RX70 User s Manual Window names and functions 43 1ININIYSASVIN ANY SONILLAS Key Operation This section describes key operation 1 CH SELECT 2 SPAN TRACE POSITION SPANPVRACE ACH SELECT Y POSITION lt 4 TIME DIV gt 3 TIME DIV 5 QUIT 4 MENU 6 Direction keys 7 ENTER 8 FAST FORWARD key KEY LOCK FILE CURSOR DISPLAY 9 START STOP USB DRIVE 13 FILE _ p NAV REVIEW 14 NAVI 11 DISPLAY 10 REVIEW 12 CURSOR ALARM CLEAR 1 CH SELECT Press this switch to select the channel to change the settings in the Waveform Digital or X Y screen Press this switch to move the active display box in the Digital Calculation Display screen LT p 47 ee Key Operation ZR RX70 User s Manual 2 SP
70. fringement by the Products or otherwise of any intellectual property right Buyer Remedy Omron s sole obligation hereunder shall be at Omron s election to i replace in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof the non complying Product ii repair the non complying Product or iii repay or credit Buyer an amount equal to the purchase price of the non complying Product provided that in no event shall Omron be responsible for warranty repair indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled stored installed and maintained and not subject to contamination abuse misuse or inappropriate modification Return of any Products by Buyer must be approved in writing by Omron before shipment Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components circuits system assemblies or any other materials or substances or environments Any advice recommendations or information given orally or in writing are not to be construed as an amendment or addition to the above warranty See http www omron com global or contact your Omron representative for published information Limitation on Liability Etc OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL INDIRECT INCIDENTAL OR CONSEQUENTIAL DAM
71. g Capturing and Replaying Moving cursor The CURSOR key is used to switch between cursors A and B The lt j gt or lt k1 gt gt keys are used to move the cursors ZR RX70 User s Manual Operation Modes 22 1ININIYSASVIN ANY SONILLAS 56 4 Replaying cara ei 1 This area displays voltages etc of points indicated by Cursor A or B or the selected cursor 3 4 E 7 SEARCH LEL ZONE dzone SAMPLE ims __ This area displays measuring time etc of points E gt indicated by Cursor A or B or the selected cursor E ALARM 11213 When the sampling interval is External the start time of one data capture process and the number of sample points are displayed Displays captured data Available operation during replaying SPAN TRACE POSITION The SPAN TRACE POSITION key is used to change settings Menu operations during data The MENU key is used to move the cursor search data and replay set calculation replay Moving cursors The CURSOR key is used to switch between cursors A and B The lt j gt or lt ki gt gt keys are used to move the cursors File operations The FILE key is used to save data in the internal RAM to the internal flash mem ory and USB memory Operation Modes ZR RX70 User s Manual Setting Menus When you press the MENU key during Free Running the following menu screens appear The menu screens are classified by the tab for each setting item 1 AMP Settings
72. g captured data gt This key is used to toggle between cursors A and B during replay e Waveform Digital Screen Thi if Ral RAM AT REp Tay Trg cer USE DOS 2008 04 16 mp i Replay aying Seer nr ey Se DOE enn Oy mp 3 4 6 7 5 lt 3 5 6 5 I o o SEARC H_ LE ZONE dzone SAMPLE 1 2008 04 16 44 rae n 3 ALARM Td 1213 ei Cursor B Cursor A mM Cursor A Cursor B Cursor A is in blue when selected or in gray otherwise Cursor B is in red when selected or in gray otherwise The trigger point is indicated with a green line e X Y Display Screen Tit RAN Replaying ag Trt RAW Replay ing HORTTOR A ALARM ALS S Te i ALARM Cursor B Cursor A E Cursor A Cursor B lt When alarm generated gt When the alarm setting is Hold generated Alarm the maintained alarm is cleared Fee Rina T Seco DTN Wee mee Pe Alarm generated channels SAMPLE Te ONE 1zone ALARM Mam 21314 Alarm output terminal status e Black Alarm is cleared e Red Alarm is issued ZR RX70 User s Manual Key Operation 1ININIYSASVIN ANY SONILLAS 52 13 FILE 14 NAVI Key Operation Replays data in the internal flash memory and USB memory This key is used for operations related to the internal flash memory and USB memory such as copy and delete Saves data in the internal RAM to the internal flash memory and USB memory Stops the auto save process in progress Overlay X Y images in
73. g data or Internal RAM Auto Save Internal flash memory or USB memory 2 3 Number of Capture Points Specifies the number of data points to be captured to the internal RAM This item can be set only when Internal RAM is selected in 2 2 Before setting this item check the time available for data capture A in the figure ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 2 4 Auto Save Specifies whether to automatically save data captured to the internal RAM This item can be set only when Internal RAM is selected in 2 2 Selection Description Off Disables auto save of data Data captured to the internal RAM is lost when the power is turned off or next data is captured If you want to keep data press the FILE key to save the data On Enables auto save of data Data captured to the internal RAM is saved either to the internal flash memory or USB memory When you set a faster sampling interval or increase the number of captured data the auto save process may not be completed by the time a data capture to the internal RAM ends In such a case you cannot start the next capture with the Start STOP key until the current auto save is completed If you want to stop the auto save process in progress press the FILE key to open the menu screen and select Stop Auto Save on the screen The data already saved is retained even if you stop the auto save process in progress 2 5 File Name Specifie
74. g the Analog Input Terminal ZR RX70 User s Manual Connection Diagram Important Make sure that the ZR RX70 is not pulled by signal input cables when you connect them The ZR RX70 may fall down if it is pulled Direct voltage input Direct voltage Thermocouple input Direct current input lt L Compensation Direct current copper wire Pp Shunt resistor Example If 4 20 mA is used connect a 250 Q 0 1 resistor and measure it in the 1 5 V range doce ee High voltage terminal terminal for high voltage input signals A EET Low voltage terminal terminal for low voltage input signals Item Input configuration Description Isolated input scanning Analog voltage Thermocouples A D resolution 20 50 100 200 500 mV F S 1 2 5 10 20 50 100 200 500V F S 1 5V K J E T R S B N W WRe 5 26 16 bit Filter ZR RX70 User s Manual Off Line 5 50 500Hz Connecting the Analog Input Terminal 25 NOILVaVdadd ANY SMOAHO C 26 Logic Alarm Cable Connection and Functions The logic alarm cable ZR XRL1 option enables logic pulse input external trigger sampling input and alarm signal output Connect the logic alarm cable ZR XRL1 option to the external input output terminal as shown below Logic Pulse Specifications Item Description Number of input channels 4 Input voltage range O to 24V max single ended ground input
75. ge current consumption adapter is used recharge At DC24 V When the LCD is ON 0 7 A 1 0 A during battery recharge When the screensaver is operating 25 VA 37 VA during battery pal When the screensaver is operating 0 5 A 0 9 A during battery recharge Vibration resistance Equivalent to automobile part Type 1 Category A classification External dimensions 232 x 150 x 80 mm Weight Apporx 1 1 kg Excluding AC adapter and batteries Accessories User s Manual this document Utility Disk CD R AC adapter AC cable 1 BNC terminal and M3 screw type terminal of the same channel cannnot be used simoultaneously 2 when ZR XRH1 is used Refer to Options table 3 23 C 5 C At least 30 minutes after the power supply is turned on Folter Line GND connection B54 B84 4 A logic alarm cable ZR XRL1 optional is necessary 5 23 C environment 6 2 battery packs should be mounted when using battery pack ZR RX70 User s Manual Standard Specifications 109 SNOILVOlsIOAdS y Analog Input Measurement Accuracy Common to ZR RX70A Item Description Voltage 0 25 of F S Temperature 1 Thermocouple Measurement Temperature Range C Measurement accuracy R S 0 lt TS lt 100 7 0 C 100 lt TS lt 300 5 0 C R 300 lt TS lt 1600 0 05 of rdg 3 0 C S 300 lt TS lt 1760 0 05 of rdg 3 0 C B 400 lt TS lt 600 5 56 600 lt TS lt 1820 0 05 of rdg 3 0 C
76. ge Selection Selects the image to overwrite The method for selecting an image file is the same as for selecting data to replay You cannot use the bitmap file saved by specifying Full screen for overwrite 2 Overwrite Clearing Clear the overwrited image When you do this operation during Free Running all images will be cleared When you do this operation during replay the image of the data currently being replayed is retained Irregularity may occur on the X Y screen depending on setting conditions such as high sampling interval Even in that case the captured data itself will not be affected You can save the image replayed from the captured data in a bitmap file as the waveform image and use it as source image for comparison Setting Menus ZR RX70 User s Manual 7 File Box Use the file box to specify a data save destination from the DATA menu or to replay and operate data from the FILE menu lt File box for Data Replay and Operation gt A OS ee y fF operat Ton a 4 select file tolder MEM Internal memory Cannot select gt Move folder ALARM 1121314 Key Description lt 1 b gt Change the operation of the file box Show properties c oooocccooccccooo Displays details of a file or folder g Select file folder Selects files or folders to write data lg Create new folder Creates a new folder IG Create new file
77. he CURSOR key to clear the alarm Do Not Hold Clears the alarm status when the alarm conditions are met once and then are no longer met About Level and Edge Operations In the level operation the trigger conditions are assumed to be met only if they are met when the START key is pressed after the timer reaches the set time In the edge operation the trigger conditions are assumed NOT to be met even if they are met when the START key is pressed after the timer reaches the set time The trigger conditions are assumed to be met only if they are no longer met and then are met again Example If the mode is Rising The START key is pressed here Trigger generation area lt Setting level An edge that exceeds the setting level is needed Measurement immediately Measurement starts here starts in the level operation in the edge operation There is an error of 1 at the maximum to the range between the trigger setting level and the level at which the trigger is actually generated trigger generation level e g 0 01V in the 1V range Approx 1 3 of trigger hysteresis is provided to the trigger generation level Approx 0 5 of alarm hysteresis is provided ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS About the Trigger and Alarm Operations H A trigger alarm is generated when the signal input rises to or exceeds the specified level Trigger alarm generated area mp Meas
78. ime is selected set the time after which you want to stop capturing data The actual timing conditions for data capture are related to the timer See also Sections 3 1 Timer Mode p 70 3 2 Start Side Source Settings p 70 and 3 7 Timer Trigger Information p 72 3 4 Pre trigger Specifies the percentage of data to be captured before a trigger is generated Pre trigger can be selected only when the data capture destination is the internal RAM and the start side source setting is other than OFF If the pre trigger is 30 Time available for data capture O aU Start side trigger 3 5 Repeated Capturing Sets the repeat function for repeated capturing This selection can be specified when the data capture destination is the internal RAM or the stop side source setting is other than Off Selection Description Off The repeat function is not used On The repeat function is used After one data capture process ends the next data capture process starts or a trigger is waited for if the start side source setting is other than Off 3 6 Repeat Interval Specifies the interval from the start of one data capture process to the start of another data capture process if the repeat function is used This selection can be specified when the following three conditions are all met e the Repeated capturing is On e the start side source setting is Off or Time and e the stop side source setting is
79. in the range of can the displayed setting Please set the start trigger correctly Invalid trigger stop settings Press Enter key and change the set tings When logging is started with the trig ger setting not normally set it is dis played STOP Please set the stop trigger correctly Unable to establish a connection In connected test in the network time setting when not connected with the network server it is displayed Error Messages and Countermeasures Please check the network setting and the synchronous server setting of ZR RX ZR RX70 User s Manual List of File Error Messages This section outlines the file error messages that are displayed and the countermeasures for those messages Display Disk I O Error 2 Disk I O Error 9 Disk I O Error 13 Details Cause File or directory is not found Invalid file format It is displayed by either of following cause e Not formatted e Write protected e Memory failure Countermeasure Set a correct file or directory Filesystemn is invalid and format it again please If the error is not canceled even if it formats it might the media failure Repair ZR RX when a built in mem ory is failure Please use another USB memory when the USB memory is failure e Please confirm whether write protection is turning on For the USB memory with the write pro tection function e Please format it If the error is not canceled
80. ions e Locations where the temperature exceeds the rated range e Locations where severe changes in temperature occur where condensation occurs e Locations subject to corrosive or flammable gases e Locations subject to dust salt or iron powder e Locations subject to direct shock or vibration e Locations subject to direct sunlight or near heating devices e Locations where water oil or chemical products may be splashed e Locations subject to strong magnetic fields or strong electric fields 2 Power supply connecting and wiring e The cables should be wired apart from high tension or power lines Malfunction or damage may occur due to induction e After wiring check the adequacy of power supply voltage miswiring such as overvoltage load short circuiting and adequacy of load current before turning on the power supply Malfunction may occur due to miswiring and such e Always turn off the power supply when attaching or removing peripheral devices Attaching or removing of peripheral devices with the power supply on can cause malfunction or data corruption 3 Installation e Do not cover the vent hole when using this product Leave at least 30cm of installation space around this product The generated heat may cause malfunction or damage e When measuring temperature install the product so that the input terminals are not subject to severe changes in temperature by wind or sunlight It may cause calculation errors e Connect the
81. is feature The time adjustment is not performed On Enables this feature The time adjustment is performed Time Server Specifies the domain name of the time server to be used Time Zone Sets the time zone of the area in which the ZR RX70 is to be used Japan 09 00 Synchronized Time Sets the time at which the ZR RX70 clock is to be synchronized with the time server When the setting time comes the synchronization operation in the local country is per formed with a method specified in Synchronization Mode Synchronization Mode Immediately Gradually Sets a method in which the clock is to be synchronized with the time server Immediately Immediately synchronizes the clock with the time server when the time for synchronization comes Gradually Does not immediately synchronize the clock when the time for synchroni zation comes Gradually synchronizes the clock with the time server The adjusted length of time is about 43 seconds per day approximately equal to 10 ms per 20 seconds Connection Test Performs a connection test by connecting to the time server After the connection test is performed a message is displayed If connection fails check the settings and conduct the connection test again If the connection test is a success the following message is displayed The synchronization is not performed if the error with the time server is 500 ms or more The synchronization accuracy with the time server is approx
82. ity CD ROM pdf data Software Manual Information for installing PC software basic operation explanation of screen and setting methods is described Two PC software manuals are contained Special PC software Wave Inspire RX Basic PC software Smart Viewer RX70 User s Manual this manual Same contents as the above referenced User s Manual packaged in the product yA MM E E E E E E A A A E A A E A A A A A E E y TETTETETT Y E eee User s Manual Portable Multi Logger ZR RX70 APPLICATION CONSIDERATIONS Please Read GENERAL DESCRIPTION CHECKS AND PREPARATION SETTINGS AND MEASUREMENT SPECIFICATIONS APPENDIX Terms and Conditions Agreement Warranty Limitations of Liability Warranties Exclusive Warranty Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron or such other period expressed in writing by Omron Omron disclaims all other warranties express or implied Limitations OMRON MAKES NO WARRANTY OR REPRESENTATION EXPRESS OR IMPLIED ABOUT NON INFRINGEMENT MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE Omron further disclaims all warranties and responsibility of any type for claims or expenses based on in
83. l operation Level AND Starts stops capturing data when all trigger conditions are met Each condition is a level operation Edge OR Starts stops capturing data when at least one trigger condition is met Each condition is an edge operation Edge AND Starts stops capturing data when all trigger conditions are met Each condition is an edge operation 2 Mode Specifies the mode for trigger comparison for each channel Off Disables triggers for the set channel T H Rising Generates a trigger when an input signal is above the specified level J L Falling Generates a trigger when an input signal is below the specified level Win In Generates a trigger when an input signal is has come between the upper and lower limit levels set for each channel There is no setting for a logic channel Win Out Generates a trigger when an input signal is not has moved out from between the upper and lower limit levels set for each channel There is no setting for a logic channel 3 Level Specifies the level for trigger comparison Set one level for comparison if the mode is set to T H Rising or 4 L Falling Set two levels for comparison if the mode is set to Win In or Win Out 4 Hold Generated Alarm Specifies the operation that occurs when the alarm conditions are met once and then are no longer met Hold Maintains the alarm status when the alarm conditions are met once and then are no longer met Press t
84. lation results when Execute is selected For calculation results see the table below Press the FILE key to open the window to save the statistical calculation results Specify a save destination and select the OK key to save the statistical calculation results in text format CSV The method for specifying the save destination and file name is the same as for specifying the captured data file LT For details see p 85 Alema on Hes 0 j Max pan i O 0 FILE for Gy 0 1 0 0 1 0 0 0 1 0 0 0 0 0 4 3 B 10 B A 7 Min 0 I e Folder lt MEM gt Z Name Type Ara Cancel save QUIT for return Selection Description Off Calculation is not performed Average Displays the simple average value of data being captured Max Displays the maximum value of data being captured Min Displays the minimum value of data being captured Peak Displays the peak value of data being captured RMS Displays the effective value of data being captured The calculation formula is as shown below R M S 2D n D data n number of data 9 11 X Y Display Settings The ZR RX70 can convert waveform data to X Y display This menu is used to assign channels and make other settings to convert the data to X Y display Setting Selections available X ch Sets a channel to be assigned to the X axis in each zone Y
85. more 512 MB or more recommended 1 GB or recommended more e Windows Vista 1 GB or more recommended 2 GB or more 1GB or more Display Compatible interface Realtime display e 1024 x 768 resolution or higher e 16 bit color or higher screen display functions recommended 24 bit color or more USB LAN Up to 1 ms Standard functions Waveform operation Waveform display Configuration function Extarnal control of sampling Captured data Sampling period Others Review saved data realtime capture of PC data main unit setup CSV file conversion Drag amp Move waveform directly Batch change of CH scale Intuitive operation by mousewheel Change CH scales individually by icons SNOILVOlsIOAdS y Displays multi windows Split display in the single window Displays all the CH multi scales X Y display simultaneously Meter display selection X Y display Scrolling for all directions up down right left Smart Listview setup function Smart Grouping function Setup in the tab format Not available Available can set and display Binary file original format Captured data and the information of graph window are saved CSV file Captured data is saved in Comma separated value format Binary files can be converted to CSV files all at once Binary format 10 us to 60 s CSV format Sampling interval 10 ms to 60 s Cursor function Comment input function FFT display Excel transfer fun
86. mounted on ZR RX70 One sufficient for battery charging When capturing to internal memory at a sampling speed of 1 sec using new battery packs at 25 C environment The running time depends on the operating environment Humidity Sensor ZR XRH1 Option Specifications Item Allowable temperature range Allowable humidity range Relative humidity measurement accuracy Description 25 to 80 C 0 to 100 RH 3 RH 5 to 98 RH at 25 C Relative humidity measurement accuracy 5 to 98 Measurement environment Measurement accuracy 0 to 10 C 5 RH 10 to 20 C 4 RH 20 to 30 C 3 RH 30 to 40 C 4 RH 40 to 50 C 5 RH 50 to 60 C 6 RH 60 to 70 C 7 RH 70 to 80 C 8 RH Response time Sensor output Power consumption 15 sec 90 response when membrane filter is installed Oto1V Approx 4 mA External dimensions Cable length Sensor power source Accessory Option Specifications 14 mm x 80 mm excluding cable 3m 5 to 16 VDC ZR RX70 User s Manual ZR RX70 mounting screw holes Two M4 depth6 Unit mm 0000000000000000000000000 0 00 o DD O O oooeececaes avo 007000 ooo 1070070707007 ooo0o eseee8 NN Ma 15779 o LN Le Ay 0000000000000000000000000000 Go OO OO OO OO OO OO OO OO 0000
87. nly when Pulse is selected in 1 6 Setting Description Off Disables the pulse input Revol Counts the number of pulses per second and multiplies it by 60 to capture an rpm value Counts Captures the cumulative number of pulses for each sampling interval from the start of measurement Inst Captures the number of pulses for each sampling interval 1 8 Filter Sets the filter for digital input Setting Description Off Disables the filter On Enables the filter The filter is effective in an environment where there is lots of noise Filter is approximately 30 Hz 3dB 1 9 Slope Sets the slope direction to count the number of pulses This item can be set only when Pulse is selected in 1 6 Setting Description TH Counts the rising edges of pulses LL Counts the falling edges of pulses 1 10 EU Scaling Converts the measured signals to other units PST Heer Trig L EL sett ing Setting 1 Function Description Sets On Off of the Scaling function 2 Meas Value 3 EU Output Value 4 Select Sets the numeric value to be converted Sets the upper and lower limits of the output value after conversion Selects the specific type of engineering units The following selections are available Current length area volume speed acceleration frequency weight power pres sure flow temperature 5 Unit Selects the converted unit The units displayed
88. nts mode Function Displays a count of the number of pulses for each sampling interval from the start of measurement 50 100 200 500 1k 2k 5k 10k 20k 50k 100k 200k 500k 1M 2M 5M 10M 20M CIF S Span Inst mode Maximum number of pulse inputs External sampling input Function Counts the number of pulses for each sampling interval Resets the count value after each sampling interval 50 100 200 500 1k 2k 5k 10k 20k 50k 100k 200k 500k 1M 2M 5M 10M 20M C F S Span Maximum input frequency 50 kHz Maximum number of counts 15 MC 24 bit counter 100kHz 10us or less Maximum input frequency Time error 1 A unit in us and External cannot be selected if the save destination is the internal flush memory or USB memory 12 Neither the internal flush memory nor USB memory can be selected if a unit in us is selected 3 This function is available only if data is captured to the internal RAM 4 Realtime and between cursors specified during data replay Standard Specifications ZR RX70 User s Manual Accessory Option Specifications PC Software Item Compatible operating system Standard PC software Smart Viewer RX70 Since Ver 2 02 Standard accessories Special PC software ZR SX10 Wave Inspire RX Since Ver 2 3 Option Specifications Windows Vista XP 2000 CPU Intel compatible processor 1 GHz or faster Pentium 4 2 0GHz or higher recommended Memory e Windows 2000 XP 512MB or
89. o yl o e o ia lora ds Das 69 4OPTSetungS aristas A e ios 75 5 CTH SeUINnGS 242s sp A hee ere i es eae 17 6 PILE MET o tea de ee at 80 CAS 3 one ne dite bd oti ead dete oa ee dt BE Sa eee ee 85 9 Text IDU ocur cata Saeed weed a ads aa oy aces Ads a a SS 88 9 Data Replay Menu so 2 43 0548 asar aa dba ate bat 89 CIO NAV MENU 22 22 Sok hea oe Ae ee ee a Re Aa Se 93 UPLEO RE ae frre ies a ate aa ee ees wet eee ee et cee E dee 93 12 Canceling Key Lock with Password 00 0c ce eee eee eee 94 X Y Measurement Example 020 e eee eee ees 95 Example 1 Measure the CH1 for X axis and the CH2 for Y axis 95 Example 2 Overlay the data on the previously captured data to compare their waveforms 98 WEB Server Function 0 000 cece eee es 100 ZR RX70 User s Manual 4 SPECIFICATIONS Standard Specifications 0000 es 108 Standard Specifications 0 0 0 00 eee 108 Analog Input Measurement Accuracy 00000 e eee ee eee 110 Main FUNCUONS 3 dao a oaks hae alee et aie oa 111 Accessory Option Specifications nannan eee ee 113 PESO IWS 255 eth eid a Galore ie aio 113 Battery RACK 2 4 idee moire a eek ce teak gies we A ele tet erie we a ae Sete 114 FUMA Sensor eibar Bese Lee ea Gt dees s beeen 114 External DIMENSIONS ii eae ewe sadn Cea eee 115 9 APPENDIX Error Messages and Countermeasures 00000e eee eeeee 118 LISUOMEMOF MESSAQCS
90. on Automatically turns off the display if the ZR RX70 is not operated within a specified interval Turning off the display frequently using the screen Saver function allows longer lifetime of the LCD screen ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 78 5 3 Power On Start Sets the feature that automatically starts measurement when the ZR RX70 is powered on Selection Description Disable Disables the Power On Start function Enable Enables the Power On Start function 5 4 Room Temp Compensation Specifies the room temperature compensation in temperature measurement using a thermocouple Selection Description Internal The ZR RX70 s room temperature compensation settings are used Usually you use this parameter External Set this parameter to use the room temperature compensation settings in external devices 5 5 Temp Unit Toggles the temperature unit between C Celsius and F Fahrenheit Selecting F forcibly enables the scaling function When F Fahrenheit is selected the calculation formula is as shown below F Fahrenheit C Celsius x 1 8 32 Accuracy is calculated using the formula Accuracy at Celsius x 1 8 5 6 Background Color Sets the background color of the waveform and digital display areas 5 7 Start Stop Confirmation Message Specifies the setting of the confirmation message displayed when data capture is started and stopped Sel
91. operation Part Names and Functions 20 Connecting the Power Cable and Turning on the Power 21 Connecting the Analog Input Terminal 24 Logic Alarm Cable Connection and Functions 26 Attaching USB Memory 29 Connecting to a PC 30 Using the Battery Pack ZR XRB1 Option 32 Connecting the Humidity Sensor Option 34 Precautions to Observe When Performing Measurement 35 Noise Countermeasures 36 Setting the Date and Time 37 Changing the Display Language 38 NOILVaVdadd ANY SAIIHO C This section describes the names and function of parts of the ZR RX70 PC interface terminals Monitor Operation status LED Power switch e USB e POWER ON when the power is ON LAN e START ON during data capture CHARGE ON while the battery is charging Fan o o o o o o o o 1 2 3 4 5 6 7 8 Control panel keys Analog signal input BNC connector GND terminal EME AMORE San AC adapter jack Q Q O Q O Q USB memory terminal External input output terminal DO 09 DO OO 00 1090 09 Sell Power jack for LOGIC PULSE LOGIC PULSE input A humidity sensor EXT TRIG Trigger input a ALARM Alarm
92. or is adjacent to the LAN connector Make sure the cable is inserted into the correct connector USB cable If the USB cable is used the USB driver must be installed in your PC Refer to Installing the USB Driver in the PC Software Manual e Use an A B type USB cable to connect the ZR RX70 to a PC A connector B connector a e Connecting to a PC ZR RX70 User s Manual LAN Connection Use a LAN cable to connect the ZR RX70 to a PC LAN cable Cable Types e Use a crossing cable when connecting directly to a PC without using a hub LAN cable crossing e Use a straight cable when using a hub LAN cable straight LAN cable straight ZR RX70 User s Manual Connecting to a PC NOILVaVdadd ANY SMOAHO C Using the Battery Pack ZR XRB1 Option The ZR XRB1 option is the only battery type that can be used with the ZR RX70 Two battery packs need to be mounted when you have the ZR RX70 run on batteries You can also mount only one battery pack when you charge it using the AC power source At this time the battery pack can be mounted on either the right or left The running time using batteries is about 2 5 hours when the screen saver is operating Mounting the Battery Pack 1 While lightly pushing the grip of the battery cover slid the cover in the direction indicated by the arrow Attach the battery with care of polari
93. ormance such as operational precautions Indicates application procedures LT Indicates pages where related information can be found ZR RX70 User s Manual MEMO ZR RX70 User s Manual 1 GENERAL DESCRIPTION OVE EVICW idas da a 16 Fell oia asia a dt a 17 Operating Environment 00 0 cee ees 18 2 CHECKS AND PREPARATION Part Names and Functions 0000 es 20 Connecting the Power Cable and Turning on the Power 21 Connecting to an AC Power Supply 00 000 cece eee eee 21 Connecting to a DC Power Supply 0 0 0 0 cece eee eee 23 Connecting the Analog Input Terminal 00000005 24 Terminal Configuration and Signal TypeS 0 000 cece eee eee 24 Connection Diagram A E Bey Sued ees 25 Logic Alarm Cable Connection and Functions 26 Attaching USB Memory sisiccssriaaaa ira ee tee 29 aa Insening USB Memon sera a Pada tase at cer Behe eRe ad wees 29 dd Conn ctingtoa PC e A ER Sees 30 Connection Using a USB Cable o o o oooooconoo nooo 30 EAN CONNECCION orenen iaei rea dae ae ri 31 Using the Battery Pack ZR XRB1 Option 32 Mounting the Battery Pack 0 0 ccc a 32 Charging the Battery 0 ccc eee eee eee 33 Connecting the Humidity Sensor Option 34 Precautions to Observe When Performing Measurement 35 Noise Countermeasures
94. pling interval is 1 ms the data capture destination is the internal RAM and the number of capture points is 10000 Time Date From the date of First Data to the date of Last Data Time From the time of First Data to the time of Last Data Cursor Sync Off On Data Search Level Combination Edge OR Edge AND Settings Mode Analog Off T H 4 L Win In Win Logic Off TH 4 L Pulse Off TH 4 L Win In Win Out Level Numeric value setting Alarm CH Off Output 1 Output 2 Output 3 Output 4 Alarm CH mode Rising 4 Falling Next Search gt gt Execute Prev Search gt Execute Statistical Calcula Execute gt gt Execute tion between Cursors X Y Display Settings X ch CH1 to CH8 Y ch CH1 to CH8 Trace Off On Execute X Y for All Data gt gt Execute Execute X Y between Cursors gt gt Execute ZR RX70 User s Manual Setting Menus 89 1ININIYSASVIN ANY SONILLAS 9 1 Move to First Data Moves the currently selected cursor A or B to the start of the data 9 2 Move to Last Data Moves the currently selected cursor A or B to the end of the data 9 3 Move to Center Moves the currently selected cursor A or B to the center of the data 9 4 Move to Trigger Position Moves the currently selected cursor A or B to the trigger position 9 5 Move to Selected Position Moves the currently selected cursor A or B to a selected position relative position in time or
95. r Level Settings Trigger Operations Unit Select USB Cable 60 60 Connection Using a USB Cable USB Drive Mode USB memory USB Setting USER Settings Warming up Window names and functions 62 62 30 ZR RX70 User s Manual MEMO XIQNAddV G ZR RX70 User s Manual Index 1 A manual revision code appears as a suffix to the catalog number at the bottom of the front and back covers of this manual Cat No 2283 E1 03 Revision code 01 February 2009 Original production 02 October 2009 Function addition according to software upgrade Ver 2 03 03 December 2013 Page 2 and 3 Replaced Warranty and Application Considerations with Terms and Conditions Agreement Page 24 Added information to Terminal Configuration and Signal Types Es Revision History ZR RX70 User s Manual Authorized Distributor
96. rget folder ENTER Select Move folder mepe ee ii Use the gt gt gt key to select Create new folder i MEN 18 14 165 18 1 ese No File Er eee KAL r a z e Create new folder Cannot select gt Move folder a Press the ENTER key ore A A E In the New folder name box that appears type in TEST New folder name EA Alph Big LEA SIA PORSTOPERTE ft gt Select lt Back a Forward ENTER Inp ut OUIT Exit Move folder Setting Menus ZR RX70 User s Manual peon OL el Use the lt K key to choose Select file folder ina da an ecalculat ion 3 MEM 06 04 16115_05_55 TEST TENTER Execute JE Move folder a Use the YA key to move the cursor to the created TEST MENO RI folder and press the ENTER key a elect filesfolder MEM 05 04 161 15_05_55 TEST ENTER Se lect gt JMove folder A a Select OK to close the screen Record Settings Samp ing is Capture des File Name MEM lt AUTO GBD i E oe a E Name Type AUTO OK CE s the capture file binary CSV text data ZR RX70 User s Manual Setting Menus LINAWSYNSVAW ANY SONILLAS 8 Text Input This menu is used to specify the settings of text input operations such as annotation EU scaling unit and captured data file name input 2009 05 20 PEA SE 14 20 53 i New folder name Ma 0 41 Alph
97. s 4 Dec pt Specifies the decimal point position of the EU output value s 5 Select Selects the specific type of engineering units The following selections are available Current length area volume speed acceleration frequency weight power pressure flow temperature 6 Unit Selects the converted unit The units displayed in this item are those of the type selected in Select To set a unit not displayed in this item define an arbitrary character string in User Defined Unit The setting made in this item is displayed in User Defined Unit 7 User Defined Unit Selects the converted unit which can be specified as a user defined character string consisting of alphanumerics For details on text input see p 88 The settings made in Select and Unit are reflected here s9 Setting Menus ZR RX70 User s Manual e If a message appears follow the instructions by reducing the number of digits to be output by one or leaving the number of digits as is and changing the EU value e The Scaling operation is calculated using a ratio of the Meas Value or EU Output Value settings is displayed when the converted value cannot be processed by MT100 Span may be changed according to the value set for Scaling Setting Example Meas Value EU Value Upper Value 5 000 20 00 Lower Value 5 000 20 00 XX XX rpm 5V 20 00 rpm gt CH 1 10
98. s are the same as the Trigger Level Settings except that the Combinations include only edge operations and no level operation and the Alarm Output can be set to Rising from Cleared to Generated and Falling from Generated to Cleared LT See the Trigger Level Settings Alarm Level Settings p 72 This section describes only how to specify the Alarm Output cece Cae mT SSS te Display Analog Data Combination PEAD DR CH Mode Lower Leve Upper Alarm CH ia PA T Setting Selections available 1 Alarm CH Sets the alarm output to be used for search Off No alarm output is used for search Output 1 to Output 4 The specified output is used for search 2 Mode Sets the search mode T Rising Finds an edge at which the alarm output changes from Cleared to Generated Falling Finds an edge at which the alarm output changes from Generated to Cleared 9 8 Next Search Moves the cursor to a position after the current cursor position where the search conditions are met Set the search conditions in Section 9 7 Level Settings 9 9 Prev Search Moves the cursor to a position before the current cursor position where the search conditions are met Set the search conditions in Section 9 7 Level Settings ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 92 9 10 Calculation Execute Performs calculation between cursors Opens a window and displays calcu
99. s how long data can be captured Capacity available for data capture Indicates the capacity available for data capture with the mem ory size if the data capture destination is the internal flash memory or USB memory The figure shown in brackets is the percentage of free memory space to the total memory size Possible number of times of repeating Indicates how many times data captured to the internal RAM can be saved to the save destination device if Auto Save is set to On Beware of using this setting particularly when Repeated Capturing is set to On for the trigger LT For details see 3 TRIG Settings p 69 The time available for data capture is calculated for data up to 2GB If the capacity of free USB memory is 2GB or more over is displayed When the time available for data capture for 2GB is exceeded after the data of 2GB is captured the capture of remaining data is automatically resumed to another file The data between the stop and resumption of the capture process is not captured when the sampling interval is too fast capture Time 400101 4hr Som over Canture Space 2 56 Gbytes 602 ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 2 6 Statistical Calculation Settings The ZR RX70 can perform two statistical calculations This section describes specifying the statistical calculation settings Selection Description Off Calculation is not performed
100. s the name of a file or folder to which you want to capture data or auto save data lt If the Name Type is Auto gt lt If the Name Type is User gt Tar 3 E a ae z e ae save Les i WMEM File Name DEFAUDT GED 7 Hame Type AA File Type n Folder Name Type ie File Type BIRAFrYIBBD Setting Description 1 Folder Specifies a folder to which you want to capture or save data LT For details see the file box on p 85 2 File Specifies a file to which you want to capture or save data LT For details see the file box on p 85 3 Name Type Sets how a data file is named Auto Automatically gives a name to a file Example 20050101 123456_UG GBD Number part Date and time at which a file was created In this example the date is January 1 2005 and the time is 12 34 56 GS E User number for data capture UG Guest U1 User 1 U2 User 2 GBD envrsri rarnpcaza Data format GBD Binary format CSV Text format When the Repeated capturing is On the text of rep showing repeat and a number showing the number of times of repeating are added as shown by 20050101 123456 UG_rep001 GBD User Captures data to a file with a user defined name 5p Setting Menus ZR RX70 User s Manual Setting Description 4 File Format Sets the file format in which you want to save data GBD Creates a data file in Omron proprietary binary format Prevents tampering of da
101. ser 2 Since setting conditions are stored for each user they can be called up easily by sim ply switching the user ZR RX70 User s Manual 5 OTHR Settings Other miscellaneous settings are made here HEN CAP TATA TRIS OPTA OTHER jig g NEN UTE LED brightness Screen Saver Power On Start Room Temp Temp Unit gt Background Color Bath Confirm Start stop M hor Date Time Language Return to default Demo waveform Game a EE me Setting LCD Brightness Screen Saver Power On Start Room Temp Temp Unit Background color Start Stop Confirmation Message Selections available Light Medium Dark Off 10 30 sec 1 2 5 10 30 60 min Disable Enable Internal External O P Black White On Off Date Time Date Time January 1 2005 to December 31 2035 00 00 00 to 23 59 59 Hour Minute Second Time Server Time Zone Synchronized Time Connection Test Off On Text Input 12 00 to 13 00 one hour steps 00 00 to 23 59 Hour Minute Synchronization Mode Immediately Gradually gt Execute Language Japanese English US English UK French German Chinese Korean Return to Default Settings gt Execute Demo Waveform Mode Off On Game Information 5 1 LCD Brightness Sets the brightness of the LCD backlight 5 2 Screen Saver Memory test game Number order game Reversi Blackjack Speed V Show Informati
102. set to Time or the stop side source setting is set to Off and the data capture destination is set to Internal RAM ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 72 3 7 Timer Trigger Information Displays the timer and trigger information in an easy to understand manner Example Timer Mode Every Day Cycle SN SMP Dare TRIS Wer ara 108 05 21 MEROS Start Side Source Setting Level az Mer Tra Stop Side Source Setting Time j Timer Daily Trigger nina Repeated Capturing On JE 10 00 2 00 10 00 a not start data capture Data capture is enabled only in this interval i E F E Data is actually captured in this interval i 4 Time Level Time ENTER QUIT JC lose This is only a conceptual illustration in which the graph length number of times of repetition and other items do not agree with the actual time 3 8 Alarm Setting Specifies alarm generation conditions and output destinations When the conditions specified here are met an alarm is output from the alarm output terminal specify the output destination number for each channel With Hold Generated Alarm set to Hold the alarm status is maintained after the conditions are met once even if they do not continue to be met Press the CURSOR key to clear the alarm See Trigger Level Settings Alarm Level Settings p 72 Trigger Level Settings Alarm Level Settings If the start side source setting or stop side sourc
103. side source setting Date January 1 2005 to December 31 2035 Time 00 00 to 23 59 Hour Minute Every Day Start side source setting Time 00 00 to 23 59 Hour Minute Cycle Stop side source setting Time 00 00 to 23 59 Hour Minute Every Hour Start side source setting Time 00 00 to 59 59 Minute Second Cycle Stop side source setting Time 00 00 to 59 59 Minute Second Start side source setting Off Level External Input Time Level Combination Level OR Level AND Edge OR Edge AND Mode Analog Off T H 4 L Win In Win Out Logic Off TH J L Pulse Off TH 4 L Win In Win Out Level Numeric value setting Time 0000 00 01 to 9999 59 59 Hour Minute Second Stop side source setting Off Level External Input Time Level Combination Level OR Level AND Edge OR Edge AND Mode Analog Off T H J L Win In Win Logic Off TH J L Pulse Off TH JL Level Numeric value setting Time 0000 00 01 to 9999 59 59 Hour Minute Second Pre trigger 0 10 20 30 40 50 60 70 80 90 100 Repeated capturing Off On Repeat interval 0000 00 00 to 9999 59 59 Hour Minute Second Timer trigger information v Display Information Alarm Alarm Hold Off On level Mode Analog Off T H UL Win In Win SS Logic Off TH LL Pulse Off TH JL Level Numeric value setting Output 1 2 3 4 ZR RX70 User s Manual Setting Menus 1ININIYSASVIN ANY SONILLAS 3 1 Timer Mod
104. sy operation is achieved through a straightforward menu structure and key allocation which resembles mobile phones e The relationships between timers and triggers are displayed graphically in an easy to understand manner Data Capture e Data can be saved to the internal flash memory or external USB memory The saved data will be retained even after the power is turned off e The internal flash memory can be used with disk images thus multiple data items can be maintained e Setting the data capture destination to the internal RAM enables quick capture of data After checking the captured data you can save it to the internal flash memory or USB memory if required Data Control amp Processing e The PC software provided lets you set conditions and monitor data on a PC e The USB drive mode function enables the ZR RX70 s internal flash memory to be recognized as an external drive by your PC Connect the ZR RX70 to your PC and turn on the power supply to the ZR RX70 while holding down the START key Captured data can be read from the PC software to files and displayed for processing e Data can be transferred off line to a computer using USB memory e The WEB server function enables control and monitoring from a remote location without using dedicated software e The FTP server function enables handling internal memory and USB memory data from a PC e The NTP client function enables adjusting the time according to the NTP server ZR R
105. t not be used under the environment of the installation category III and IV 3 Measurement category e The ZR RX70 is classified as measurement category defined by IEC61010 1 and must not be used within measurement category Il lll and IV 4 Power supply and wiring e Do not connect voltages exceeding the rated voltage to signal cables e Be sure to check the polarity of the signals when connecting the signal cables e When using the battery pack be sure to read the cautions on the battery pack carefully for correct usage e Be sure to use only the specified battery pack e Be sure to use only the AC cable and the AC adapter provided as standard accessories e Do not connect power supplies exceeding the rated voltage to the AC adapter e Be sure to turn off the power supply when connecting to the input terminals e Do not touch the input terminals during measurement e Do not input signals to the M3 screw type terminal and the BNC connector of the same channel at the same time 5 Others e Dispose of this product as industrial waste e If there are any troubles stop usage immediately turn off the power supply and contact OMRON branch or sales office ZR RX70 User s Manual Precautions for Correct Use Please observe the following precautions to prevent inoperability misoperation of the product or negative effects on the performance and the device 1 Installation Location Do not install this product in the following locat
106. ta CSV Creates a data file in a text format Cannot be replayed on the ZR RX70 When the data capture destination is the internal flash memory or USB memory and the sampling interval is from 1 to 5 ms you cannot select CSV Select a sampling interval lower than 10ms e If you perform data capture with Name Type set to Auto data will be saved in folders automatically created with the date and time as their respective names The time folder is created below the date folder e If you perform data capture repeatedly with Name Type set to Auto after certain number of files are captured a new time folder is created and data is captured to the folder e When you save files create a folder and then save the files in the folder Regardless of the remaining capacity if you try to save files in the root directory due to file restrictions you may not be able to save files e The displayed Capture Time may vary according to the sampling interval or number of capture channels Changing the sampling interval capture destination or number of capture points will change the screen display of the time available for data capture capacity available for data capture and possible number of times of repeat ing If you find that the measuring time exceeds the capacity available for data capture either change the sampling interval or capture destination to large capacity USB memory Time available for data capture Indicate
107. the X Y Display screen This is the function of displaying a thumbnail size image of the captured data as a background For details see p 84 Copies the window Saves the settings currently in use or loads settings oe he ee FTE E File Operation f File replay amp operation RA A z jz E B Bitmap save E T A Execute gt 3 SAMPLE ius Save Load current settings ZONE dzone AE F Load 3 05 1 E oh PSBMP copy i z ALARM Ti 121314 This key is used to display the key operation content during Free Running capture or replay During display of the NAVI screen an explanation of how the key is used is displayed in the window To exit the NAVI screen press the NAVI key again ZR RX70 User s Manual Basic Procedures Used in Settings The following are basic operation procedures for settings 1 Press the MENU key to open each menu 2 Use the yA lt D key to move the cursor to the items you want to set 3 Press the ENTER key to display a list of setting values 4 Use the yA lt D key to select a setting value 5 Press the ENTER key to confirm the value The above operation is the basic procedure that may be used for each setting However precise procedure may vary between setting items Please follow the procedure indicated by each menu ZR RX70 User s Manual Key Operation LINAWSYNSVAW ANY SONILLAS 54 Operation Modes You can check the
108. to save function 3 ON or OFF setting ON Automatically saves the data in the internal RAM to the internal flash memory or USB memory OFF Only temporarily retains data in the internal RAM The data is lost at power off PC Interface types Ethernet 10BASE T 100BASE TX Interface USB USB 2 0 HIGH SPEED Ethernet functions Web server function Displays ZR RX70 screen image on Web browser and operates ZR RX70 from the Web brouser FTP server function Transfers and deletes files from internal memory and USB memory NTP client function Corrects the time of internal clock USB functions A connector Connection to USB memory B connector Connection to PC Select if controlled by the PC software or USB drive mode Realtime data 1 ms to 60s transfer speed Monitor Display 5 7 inch TFT color LCD QVGA 320 x 240 dots Display settings Waveform screen Digital screen Waveform screen Digital screen Calculation Display screen X Y display Display languages Japanese English Chinese Korean German French Backlight life 50 000 hrs when brightness is down to 50 depends on operation environment Screensaver function OFF ON 10 30 sec 1 2 5 10 30 60 min Calculation EU scaling function Voltage value can be changed to any value unit functions 4 points can be set for each channel Statistical calculation functions 4s ZR RX70 User s Manual Types of statistical calculation Average Max Min Peak
109. ts Omron Companies shall not be responsible for the user s programming of a programmable Product or any consequence thereof Disclaimers Performance Data Data presented in Omron Company websites catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty It may represent the result of Omron s test conditions and the user must correlate it to actual application requirements Actual performance is subject to the Omron s Warranty and Limitations of Liability Change in Specifications Product specifications and accessories may be changed at any time based on improvements and other reasons It is our practice to change part numbers when published ratings or features are changed or when significant construction changes are made However some specifications of the Product may be changed without any notice When in doubt special part numbers may be assigned to fix or establish key specifications for your application Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product Errors and Omissions Information presented by Omron Companies has been checked and is believed to be accurate however no responsibility is assumed for clerical typographical or proofreading errors or omissions ZR RX70 User s Manual Terms and Conditions Agreement Meanings of Signal Words The following signal words are used in this man
110. ty and insertion direction When you have the ZR RX70 run on batteries be sure to mount two battery packs with the same charge level Do not use the battery packs with the different charge level at the same time If you are not sure about the amount charge each battery and then attach full charged two battery packs Using the Battery Pack ZR XRB1 Option ZR RX70 User s Manual 3 Attach the battery cover Charging the Battery You can mount either one or two battery packs when you charge them Expected time required for charging e battery pack x 1 approx 4 hours e battery pack x 2 approx 8 hours The battery pack is charged by mounting it in the ZR RX70 attaching AC adapter to the ZR RX70 1 Mount the battery pack in the ZR RX70 See the previous section for the mounting procedure 2 Turn on the power to the ZR RX70 LT See Connecting the Power Cable and Turning on the Power p 21 3 The CHARGE LED lights CHARGE LED e ZR RX7O0 is equipped with a temperature monitor function which starts automatic charging as soon as it is cooled down Therefore depending on the internal temperature charging may not be performed immediately When charging is attempted while the power is ON charging may not be performed immediately depending on the temperature environment In such a case set the Screen Saver settings to ON ZR RX70 will start charging as soon as it is
111. ual Indicates a potentially hazardous situation which if not avoided will result in minor AN IAN INN ep or moderate injury or may result in serious injury or death Additionally there may be significant property damage Indicates a potentially hazardous situation which if not avoided may result in AN CAUTION minor or moderate injury or in property damage Meanings of Alert Symbols The following alert symbols are used in this manual Indicates the possibility of explosion under specific conditions Indicates the possibility of electric shock under specific conditions Indicates prohibition when there is a risk of minor injury from electrical shock or other source if the product is disassembled Indicates general prohibitions for which there is no specific symbol OOP D ZR RX70 User s Manual Alert Statements in this Manual The following alert statements apply to the products in this manual Each alert statement also appears at the locations needed in this manual to attract your attention This product cannot be used for directly or indirectly detecting human bodies to ensure safety Do not use this product as a human body protection device Serious hazard may occur in rare occasions due to ignition rupture or combustion of the lithium battery contained in this product Never disassemble deform under pressure heat or incinerate this product Serious hazard may occur in rare occasions du
112. urement starts alarm generated o CH 1 L A trigger alarm is generated when the signal input falls to or falls below the specified level Trigger alarm generated area Measurement starts alarm generated Set level Win In Used to specify the upper and lower limits for each channel When the signal level goes within or is within either limit a trigger alarm is generated Trigger alarm generated area gt Measurement starts alarm generated Set upper level Set lower level Win Out Used to specify the upper and lower limits for each channel When the signal level goes outside or is outside either limit a trigger alarm is generated Trigger alarm generated area gt Measurement starts alarm generated amp set upper level Set lower level Alarm judgment interval is 5ms Since the alarm judgment and data capture are asynchronous each other a deviation occurs between captured data and alarm output as follows e When the sampling interval is slower than 5ms a deviation of up to 1 point e When the sampling interval is faster than 5ms a deviation of up to 500 points it varies depending on the sampling interval The alarm is cleared once at the start of data capture and then compared at 5 ms intervals When an alarm is generated upon start the first few data 1 becomes L status in which no alarm is generated 1 The number of data showing L may vary dep
113. ursors it is displayed When the range is changed with scal ing on it is displayed Please change the file name EU function had set ON can t change Please turn off the scaling function and change the range The recovery could not be done When the power supply is turned off while data is being written in a built in memory the recovery processing is done However when failing in the recovery processing it is displayed The recording data cannot be replayed Please do not turn off power while logging data Upper lt Lower setting Too narrow span setting Too narrow span setting When the upper and the lower are opposite in the span setting it is dis played age CH is set by less than 1 of full scale it is displayed perature CH is less than 50 it is displayed Please change to upper lt lower When the span setting width of volt Please change the span setting value to 1 or more of full scale When the span setting width of tem Please change the span setting value to 50 C or more The load file name has not been speci fied When the setting file is loaded when it unselects the file it is displayed Please select the setting file Out of input range Invalid trigger start settings Press Enter key and change the set tings When input value is over range it is displayed ger setting not normally set it is dis played START Please change with

Portable Multi Logger ZR

Contents

Download Pdf Manuals

Related Search

Related Contents