StreamStor Serial FPDP Daughterboard User Manual
Contents
1. StreamStor Serial FPDP Daughterboard User Manual Copyright and Trademarks The information in this document is subject to change without notice This document contains proprietary information that is protected by copyright All rights are reserved No part of this document may be photocopied reproduced or translated to another language without the prior written consent of Conduant Corporation Printed in the United States 2008 Conduant Corporation All rights reserved StreamStor is a trademark of Conduant Corporation All other trademarks are the property of their respective owners Version 8 10 Publication date March 13 2008 Serial FPDP Daughterboard User Manual TABLE OF CONTENTS LICENSE AGREEMENT AND LIMITED WARRANTY ccscssssssssssssssscsssssssssccssssssssssccssssssssenssssssenes 4 ABOUT THIS MANUAL wiscccsshascsasscssecsssdesncevsscascsuassscenesestessecebestssesiesssdbassbesesseutedeseseescubssousesescesssuccsseoutesseee 6 OVERVIEW EE 7 OPTICAL engt Oe H OPTICAL PORT DESCRIPTION eu ENEE EEN EEEE RERET E 9 PROGRAMMING ine iesccsccsascsucconcasuncsacceschuvscssasenctcnsavssecascecheocensoseesecasenteseacdvesuosstesnsensvossaeowsseceosssaswssesenssesseese 10 CONFIGURING SFPDP WITH SI R prMopp 10 Forking and PassThru 10 CONFIGURING SFPDP WITH XLRSETDBMODE well SETTING UP CHANNELS ccscccsssseeesseeesseeeseeees re LD Single Channel Operapon ce eeeseecseessseeecse2. XLRSetMode Mode Description SS_MODE_SINGLE_CHANNEL Receives and sends data over one channel SS_MODE_MULTI_CHANNEL Receives and sends data over multiple channels simultaneously This mode is not valid if you for receiving or sending data over the PCI bus SS_MODE_PASSTHRU Received data is not recorded Instead it is only passed out the bound output channel SS_MODE_FORK Received data is recorded and simultaneously forked out the bound output channel Forking and PassThru XLRSetMode s SS_MODE_FORK mode is used to record data to the StreamStor drives and simultaneously send that data out a single SFPDP physical port In this mode data can only be recorded to a single channel XLRSetMode s SS_MODE_PASSTHRU mode is used to receive data and simultaneously pass that data out a single SFPDP physical port Data is not recorded to the StreamStor drives In this mode data can only be received from a single channel 10 Serial FPDP Daughterboard User Manual Configuring SFPDP with XLRSetDBMode The StreamStor API function XLRSetDBMode is used to set the mode on the SFPDP daughterboard The only valid mode for this daughterboard is SS_SFPDPMODE_NORMAL TABLE 2 SFPDP Daughterboard Modes XLRSetDBMode Mode Description SS_SFPDPMODE_NORMAL Used to set both transmit and receive options XLRSetD supported using a XLRSetD BMode is also used to set daughterboard options Table 3
3. daughterboard is SS_MODE_SINGLE_CHANNEL When in one of the above modes the default binding for channel input and channel output is the PCI bus channel 0 If you do not want to use the default binding then you must call XLRSelectChannel and XLRBindInputChannel and or XLRBindOutputChannel If you do not want to use the default daughterboard options you must also call XLRSetDBMode The following code fragment shows the sequence of API calls to use if you want to record over the PCI bus and then play data over SFPDP Port 1 channel 28 Set up to record data over the PCI bus Because by default the PCI bus is bound to the input channel and because we are going to be recording on a single channel we do not need to explicitly set the mode and bind the PCI bus However those commands are shown here for clarity XLRSetMode x1rHandle SS_MODE_SINGLE_CHANNEL XLRClearChannels xlrHandle XLRSelect xlrHandle 0 XLRBindInputChannel xlrHandle 0 XLRecord xlrHandle 0 1 record for a while XLRStop xlrHandle Next we must indicate the channel upon which the data was recorded and configure the output port To do this we must call XLRSelect with the channel number upon which the data was recorded followed by the binding of the output channel XLRSelectChannel xlrHandle 0 Since we just selected channel 0 this call to bind the output will indicate to the StreamS
4. lists the SFPDP daughterboard options These options may be combined Boolean or operation before passing them into the BMode function TABLE 3 SFPDP Daughterboard Options XLRSetDBMode Option Description SS_DBOPT_SFDPNRASSERT Receiver will assert Not Ready signal until recording starts This option has no effect during playback of data SS_DBOPT_SFPDP_CRC_ENABLE Enable SFPDP CRC generation during playback or CRC checking during recording SS_DBOPT_SFPDP_CRC_DISABLE Disable SFPDP CRC generation during playback or CRC checking during recording The power on default values for the SFPDP ports are Assert Not Ready is disabled and CRC generation is disabled SFPDP Flow Control is always enabled for transmit and for receive If this is an issue for your application please contact Conduant Corp 11 Serial FPDP Daughterboard User Manual Setting up Channels The StreamStor system can be configured in various ways to record or playback from the SFPDP ports or the PCI bus The ports and the PCI bus are each mapped to a specific channel number as shown in Table 4 TABLE 4 Channel Mapping Channel Number Channel Description 0 PCI 28 SFPDP Port Port at top of daughterboard 29 SFPDP Port 2 30 SFPDP Port 3 31 SFPDP Port 4 Bottom of daughterboard The SFPDP daughterboard supports recording and playback of a singl
5. Green D3 Green D4 Green D5 Green D6 Red D7 Red D8 Red D9 Red D10 Red On when active flow control suspend or Not Ready on laser 3 Flashing when record or play enabled with no signal detected On when active flow control suspend or Not Ready on laser 4 Flashing when record or play enabled with no signal detected On when link to Amazon is not sync d has active flow control 16 Serial FPDP Daughterboard User Manual C Coding Example The following C code shows how to set up the Serial FPDP Port 1 channel 28 as an input channel to record and then Playback the data back through the Serial FPDP Port 2 channel 29 For simplicity error handling is not shown In fully functional code x lrStatus should always be checked to see if an error was returned from a StreamStor API function call int main int argc char argv SSHANDLE hTarget XLR_RETURN_CODE xlrStatus xlrStatus XLROpen 1 amp hTarget xlrStatus XLRSetMode hTarget SS_MODE_SINGLE_CHANNEL Call XLRClearChannels before setting up channels for recording xlrStatus XLRClearChannels hTarget Call XLRSelectChannel before calling XLRBindInputChannel xlrStatus XLRSelectChannel hTarget 28 Bind Serial FPDP Port 1 channel 28 the top SFPDP port as the input channel xlrStatus XLRBindInputChannel hTarget 28 XLRSetDBMode will set the mode and options on the currently selected channel W
6. TITLE AND NONINFRINGEMENT WITH REGARD TO THE STREAMSTOR PRODUCT AND THE SOFTWARE Serial FPDP Daughterboard User Manual SOLE REMEDIES If the StreamStor Product or the Software do not meet Conduant Corporation s Limited Warranty and you return the StreamStor Product and the Software to Conduant Corporation Conduant Corporation s entire liability and your exclusive remedy shall be at Conduant Corporation s option either a return of the price paid if any or b repair or replacement of the StreamStor Product or the Software Any replacement Product or Software will be warranted for the remainder of the original warranty period LIMITATION OF LIABILITIES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO EVENT SHALL CONDUANT CORPORATION BE LIABLE FOR ANY SPECIAL INCIDENTAL INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS ARISING OUT OF THE USE OF OR INABILITY TO USE THE STREAMSTOR PRODUCT AND THE SOFTWARE IN ANY CASE CONDUANT CORPORATION S ENTIRE LIABILITY UNDER ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE STREAMSTOR PRODUCT AND THE SOFTWARE BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY THE ABOVE LIMITATION MAY NOT APPLY TO YOU RESALE If you are authorized to resell the StreamStor Product yo
7. aughterboard User Manual About This Manual This manual is intended to serve the following purposes e to provide an overview of the StreamStor Serial FPDP daughterboard e to act as a reference for the operator and e to provide guidance on software capabilities and choices It is suggested that you periodically check the Conduant web site for the most recent software updates application notes and technical bulletins If you are unable to locate the information you need please feel free to contact us by e mail or phone Serial FPDP D Overview aughterboard User Manual The StreamStor Serial FPDP SFPDP daughterboard is a mezzanine IO board that can be used with some StreamStor controllers such as the Amazon Adding this daughterboard provides a high speed data interface that conforms to the Serial FPDP specification ANSI VITA 17 1 2003 See www vita com for more information SFPDP is a high speed low latency data streaming serial communications protocol for use in high speed real time data transfer applications Serial FPDP is directly related to the standard Front Panel Data Port FPDP deriving its serial protocol from the defined protocol and control signals of FPDP See www fpdp com for more information The StreamStor SFPDP is implemented using up to four optical transceivers over fiber optic cables The board provides up to four independent SFPDP interfaces each with sustained data rates up to 245 Mbytes sec In rea
8. ding the following sections on using this feature it is important to be familiar with the American National Standard for Front Panel Data Port Specifications ANSI VITA 17 1998 and the Serial FPDP Specification ANSI VITA 17 1 2003 This manual is intended to clarify operation as it relates to the standard not to educate one on the standard itself For additional information about the standard other FPDP products and manufacturers and other technical details regarding FPDP please visit www fpdp com and www vita com The StreamStor SFPDP interface is designed to meet and exceed the basic capabilities of SFPDP as defined in the SFPDP ANSI standard The following sections describe any optional SFPDP features StreamStor has implemented any features that StreamStor has implemented as a superset to the standard any known deviations from the ANSI standard any clarifications that might otherwise be left open to interpretation and the API functions necessary to configure an external port Optical Interface The optical interface link speed supported by the StreamStor SFPDP is currently 2 5 Gbaud The StreamStor SFPDP card supports up to four independent optical ports each with sustained data rates in excess of 245 Mbytes sec Contact Conduant if you need support for optical link speeds of 1 0625 Gbaud or 2 125 Gbaud One of the advantages of optical Serial FPDP is the extension of parallel FPDP over much greater distanc
9. e Hardware Conduant s terms of warranty on all manufactured products is one year from the date of shipment from our offices After the warranty period product support and repairs are available on a fee paid basis Warranty on all third party materials sold through Conduant such as chassis disk drives PCs bus extenders and drive carriers is passed through with the original manufacturer s warranty Conduant will provide no charge service for 90 days to replace or handle repair returns on third party materials Any charges imposed by the original manufacturer will be passed through to the customer After 90 days Conduant will handle returns on third party material on a time and materials basis Software The warranty on all software products is 90 days from the date of shipment from Conduant s offices After 90 days Conduant will provide product support and upgrades on a fee paid basis Warranties on all third party software are passed through with the original manufacturer s warranty Conduant will provide no charge service for 90 days to replace or handle repair returns on third party software Any charges imposed by the manufacturer will be passed through to the customer DISCLAIMER OF WARRANTIES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW CONDUANT CORPORATION DISCLAIMS ALL OTHER WARRANTIES AND CONDITIONS EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE
10. e channel and over multiple channels Data can be recorded on a single channel then that data can be played out any of the SFPDP daughterboard s physical ports Note that if data was recorded in single channel mode that data cannot be played out over multiple ports simultaneously In multi channel mode data can be recorded simultaneously over multiple channels then that data can be played out any of the SFPDP daughterboard s physical ports Input and output channels must be selected and bound before your application can record or playback data The API function XLRSelectChannel is used to select a channel When you select a channel subsequent API calls that are channel specific will be performed on that channel The API functions XLRBindInputChannel and XLRBindOutputChannel are used to identify which channel or channels will be used for data input and which channel or channels will be used for output The StreamStor SDK Users Guide describes each of the above API commands The User s Guide also has a chapter called Channel Description and Selection that you may find useful 12 Serial FPDP Daughterboard User Manual Single Channel Operation To configure the SFPDP daughterboard for recording or playback over a single channel XLRSet Mode can be called with one of the following modes e SS_MODE_SINGLE_CHANNEL e SS_MODE_PASSTHRU e SS_MODE_FORK By default the mode of the SFPDP
11. e selected channel 28 above so with this call to XLRSetDBMode we are enabling CRC generation on channel 28 xlrStatus XLRSetDBMode hTarget SS_SFPDPMODE_NORMAL SS_DBOPT_SFPDP_CRC_ENABLE Start recording xlrStatus XLRRecord hTarget FALSE TRUE Sleep a while letting some data record Sleep 5000 Stop the recording XLRStop hTarget Set up to read the data we just recorded xlrStatus XLRSetMode hTarget SS_MODE_SINGLE_CHANNEL xlrStatus XLRClearChannels hTarget 17 Serial FPDP Daughterboard User Manual Call XLRSelectChannel before calling XLRBindOutputChannel Since we recorded on channel 28 above we select channel 28 here in order to play that data back xlrStatus XLRSelectChannel hTarget 28 Bind the Serial FPDP Port 2 channel 29 the second from the top SFPDP port as the output channel xlrStatus XLRBindOutputChannel hTarget 29 We just selected channel 29 so this call to XLRSetDBMode will enable CRC generation on channel 29 xlrStatus XLRSetDBMode hTarget SS_SFPDPMODE_NORMAL SS_DBOPT_SFPDP_CRC_ENABLE Playback the data recorded on Channel 28 through Port 2 channel 29 xlrStatus XLRPlayback hTarget 0 0 Sleep a while letting some data playback Sleep 5000 Stop the playback XLRStop hTarget XLRClose hTarget exit 0 18 Serial FPDP Daughterboard User Manual Technical Suppo
12. es up to kilometers in some cases Serial FPDP Daughterboard User Manual Each optical port consists of a transmit TX connection for transmitting data and a receive RX connection for receiving data The RX connection is also used for flow control during data transmit The RX connection is at the top of each port with the TX connection directly beneath it See picture below Deleted lt sp gt lt sp gt lt sp gt lt sp gt lt sp gt lt sp gt Serial FPDP Daughterboard User Manual Optical Port Description The optical port TX RX pair at the top of the SFPDP daughterboard is referred to as Port 1 or P1 The second optical port down from top is referred to as Port 2 or P2 The third down is referred to as Port 3 or P3 and the fourth down or the port closest to the bottom of the SFPDP board is referred to as Port 4 or P4 See picture below Deleted lt sp gt lt sp gt lt sp gt lt sp gt lt sp gt lt sp gt lt sp gt lt sp gt Port 1 Port 2 Port 3 Port 4 H Serial FPDP Daughterboard User Manual Programming The SFPDP daughterboard is designed for flexibility so each optical port can be configured to run as either a receiver or transmitter each with different options Configuring SFPDP with XLRSetMode The StreamStor API function XLRSetMode is used to set the input output path and functionality of the StreamStor Table 1 lists the supported modes TABLE 1 SFPDP I O Modes
13. esseceeeseeseceecsaceseceeesseseeecaeesaseeesneeeneeaes 13 Multi Channel Operation senene daere eiaa eA EE ERTSE EIRETAT EAN 14 SETTING OPTIONS WITH SLRSprOpTION 15 SERIAL FPDP DAUGHTERBOARD LED DESCRIPTIONS csssccesssessscecesseeeseecesseeeeseeceseeeesseeeeseeeeseesenseeesseeenss 16 C CODING BXAMPLR eenaa deet peeta eran dear EE Eara A P Ea EAEAN EEES ESPEN EE RESEO AEOS PEE EENEI ESSEE Ee 17 TECHNICAL SUPPORT viacsisisssisacessssssucsdecsdesdussoctanssscecssssstesuscsodsenesovebsccedeiseusesecdesssdeteactosedvesssosinasosecsteseseses 19 Serial FPDP Daughterboard User Manual License Agreement and Limited Warranty IMPORTANT CAREFULLY READ THE TERMS AND CONDITIONS OF THIS AGREEMENT BEFORE USING THE PRODUCT By installing or otherwise using the StreamStor Product you agree to be bound by the terms of this Agreement If you do not agree to the terms of this Agreement do not install or use the StreamStor Product and return it to Conduant Corporation GRANT OF LICENSE In consideration for your purchase of the StreamStor Product Conduant Corporation hereby grants you a limited non exclusive revocable license to use the software and firmware which controls the StreamStor Product hereinafter the Software solely as part of and in connection with your use of the StreamStor Product If you are authorized to resell the StreamStor Product Conduant Corporation hereby grants you a limited non exclusive license to transfer the Software only i
14. input and configured with the desired daughterboard options we begin recording on the two channels XLRRecord xlrHandle 0 1 record for a while When finished recording call XLRStop which will stop recording on both channels LRStop xlrHandle x NN Playing back over Multiple Channels To playback data over multiple channels simultaneously your application must call XLRSetMode with the mode set to SS_MODE_MULTI_CHANNEL Note that multiple channels cannot be sent or received over the PCI bus Prior to playing back data over multiple channels you must gt identify the channel that was used to record the data that you want to play and gt identify the physical port over which the data will flow Some possible scenarios are gt Data was recorded over channel 28 and 29 You want to read data from channel 28 gt Data was recorded over channel 28 and 29 You want to retrieve data from channel 28 and play it out port 3 and retrieve data from channel 29 and play it out over port 4 simultaneously Note that data that is recorded on a single channel can only be read or played over a single physical port For example you cannot record data on channel 28 and then play that data out ports 2 and 3 simultaneously Multi channel coding examples are in the StreamStor SDK installation directory in the examples subdirectory Setting Options with XLRSetOption The XLRSetOption function is used t
15. n conjunction with a sale or transfer by you of the StreamStor Product controlled by the Software provided you retain no copies of the Software and the recipient agrees to be bound by the terms of this Agreement and you comply with the RESALE provision herein NO REVERSE ENGINEERING You may not cause or permit and must take all appropriate and reasonable steps necessary to prevent the reverse engineering decompilation reverse assembly modification reconfiguration or creation of derivative works of the Software in whole or in part OWNERSHIP The Software is a proprietary product of Conduant Corporation which retains all title rights and interest in and to the Software including but not limited to all copyrights trademarks trade secrets know how and other proprietary information included or embodied in the Software The Software is protected by national copyright laws and international copyright treaties TERM This Agreement is effective from the date of receipt of the StreamStor Product and the Software This Agreement will terminate automatically at any time without prior notice to you if you fail to comply with any of the provisions hereunder Upon termination of this Agreement for any reason you must return the StreamStor Product and Software in your possession or control to Conduant Corporation LIMITED WARRANTY This Limited Warranty is void if failure of the StreamStor Product or the Software is due to accident abuse or misus
16. o set other miscellaneous options Table 5 lists the options available on the SFPDP daughterboard 15 Serial FPDP Daughterboard User Manual TABLE 5 Options XLRSetOption Option Description SS_OPT_FSMAPPED Enables read while recording See Application Note AN105 on the Conduant website for details on this feature SS_OPT_PLAYARM Arms two stage playback Serial FPDP Daughterboard LED Descriptions The Serial FPDP daughterboard has ten LEDs labeled D1 through D10 on the upper edge of the board Each LED has three possible states Off On or Flashing Table 6 lists what each LED indicates TABLE 6 LED Descriptions Description On when SFPDP is up and functioning Link Up on laser 1 Flashing when record or play enabled and Link Up On when SFPDP is up and functioning Link Up on laser 2 Flashing when record or play enabled and Link Up On when SFPDP is up and functioning Link Up on laser 3 Flashing when record or play enabled and Link Up On when SFPDP is up and functioning Link Up on laser 4 Flashing when record or play enabled and Link Up On when board initialized and locked to 40 MHz system clock On when active flow control suspend or Not Ready on laser 1 Flashing when record or play enabled with no signal detected On when active flow control suspend or Not Ready on laser 2 Flashing when record or play enabled with no signal detected LED Color D1 Green D2
17. problem then please initiate a trouble ticket on the support section of the Conduant website at www conduant com Please provide as much information about your system and the problem as possible We will do all that we can to resolve the problem as quickly as possible 19
18. ription and Selection Multi channel coding examples are in the StreamStor SDK installation directory in the examples subdirectory Recording over Multiple Channels To record data over multiple channels simultaneously your application must call XLRSetMode with the mode set to SS_MODE_MULTI_CHANNEL Note that multiple channels cannot be sent or received over the PCI bus Before you begin recording you must select and bind each channel that will be used during the recording The following code fragment shows the sequence of API calls to use if you wanted data recorded to channels 28 and channels 29 simultaneously and you wanted CRC checking to be used on both channels XLRSetMode xlrHandle SS_MODE_MULTI_CHANNEL Set up channel 28 XLRSelectChannel xlrHandle 28 XLRBindInputChannel xlrHandle 28 Since we selected channel 28 in the last XLRSelectChannel call this XLRSetDBMode command will be applied to channel 28 14 Serial FPDP Daughterboard User Manual XLRSetDBMode xlrHandle SS_SFPDP_MODE_NORMAL SS_DBOPT_SFPDP_CRC_ENABLE Set up channel 29 XLRSelectChannel xlrHandle 29 XLRBindInputChannel xlrHandle 29 Since we selected channel 29 in the last XLRSelectChannel call this call to XLRSetDBMode will be applied to channel 29 XLRSetDBMode xlrHandle SS_SFPDP_MODE_NORMAL SS_DBOPT_SFPDP_CRC_ENABLE Now that both input channels have been bound for
19. rt Conduant wants to be sure that your StreamStor system works correctly and stays working correctly In the event however that you are unable to get your system to work properly or if a working system ceases to function we will do all that we can to get your system back online Solving the problem is largely a matter of data collection and steps that must be taken one at a time In order for us to better serve you we ask that you take the time to perform the following steps prior to calling us This way you can provide us with the most meaningful information possible that will help us solve the problem Is the problem one that obviously requires replacement parts due to physical damage to the system If yes then please gather the information described below and report the problem to tech support by phone or through the Conduant web site Have you confirmed that no cabling has been inadvertently disconnected or damaged while working around the equipment Is the StreamStor card properly seated in the PCI CPCI PXI slot Do all the systems have good power connections and voltages Does the confidence test sscfg exe on Windows or ssopen sstest on Linux run OK Has the software installation been corrupted Try re installing software Have you checked the Conduant web site for technical bulletins Have you recently installed a new Linux kernel or compiler or a new Windows Service Pack If the above steps did not resolve the
20. tor that channel 0 data is destined for output over channel 28 XLRBindOutputChannel xlrHandle 28 13 Serial FPDP Daughterboard User Manual In this example we want to use CRC generation during playback so we must call XLRSetDBMode to enable it on the output channel XLRSelectChannel xlrHandle 28 Since we just selected channel 28 this XLRSetDBMode command will be applied to channel 28 XLRSetDBMode xlrHandle SS_SFPDP_MODE_NORMAL SS_DBOPT_SFPDP_CRC_ENABLE XLRPlayback xlrHandle 0 0 play data for a while then stop XLRStop xlrHandle It is important to note the order of the API calls The XLRSelectChannel command selects the channel that subsequent API commands will act upon As shown in the example we select the channel that was used when the data was recorded Then immediately after that we bind the output channel By calling the API commands in that order it indicates to the StreamStor that it should retrieve the data that was recorded over channel 0 and then play that data out SFPDP physical port 1 channel 28 See the C Coding Example section of this document for a detailed example of how to record and playback in single channel mode Multi Channel Operation The following sections give a brief overview of how to record and playback in multi channel mode For more details on multi channel mode please refer to the SDK User s Guide chapter called Channel Desc
21. u must distribute the StreamStor Product only in conjunction with and as part of your product that is designed developed and tested to operate with and add significant functionality to the StreamStor Product you may not permit further distribution or transfer of the StreamStor Product by your end user customer you must agree to indemnify hold harmless and defend Conduant Corporation from and against any claims or lawsuits including attorneys fees that arise or result from the use or distribution of your product and you may not use Conduant Corporation s name logos or trademarks to market your product without the prior written consent of Conduant Corporation ENTIRE AGREEMENT SEVERABILITY This Agreement constitutes the complete and exclusive agreement between you and Conduant Corporation with respect to the subject matter hereof and supersedes all prior written or oral agreements understandings or communications If any provision of this Agreement is deemed invalid under any applicable law it shall be deemed modified or omitted to the extent necessary to comply with such law and the remainder of this Agreement shall remain in full force and effect GOVERNING LAW This Agreement is governed by the laws of the State of Colorado without giving effect to the choice of law provisions therein By accepting this Agreement you hereby consent to the exclusive jurisdiction of the state and federal courts sitting in the State of Colorado Serial FPDP D
Download Pdf Manuals
Related Search