HHIC102R Chipresetter user guide
Contents
1. with the chip b Change battery Indicator light keeps on red while pressing resetting button It may be caused by a Poor contact of chip and resetting contact b Incompatible of chip and chip resetter c Resetting button jammed in case chip resetter is apart completely from chip the indicator light keeps on red To solve the problem you can a Pull out the chip resetter and insert it again to let the resetting contact fully match with the chip b Check the chip s compatibility c Check the resetting button 3 Printer cannot identify the ink cartridge It may be caused by a Poor contact of chip and resetting contact b C Chip damage Resetting failure To solve the problem you can a Re install the ink cartridge b Q O Check the chip s availability Power off the printer and restart it Reset it again2. HHIC102R Chip resetter User Guide u General Information y Function An intelligent chip equipped at original HP ink cartridge Resetting button to record and control ink volume is one off usage X Indicator light Users must buy a new ink Resetting contact f cartridge when the ink lt i z i volume is exhausted However a resettable chip can solve this problem To reset the resettable chip through chip resetter and to refill ink the ink cartridge is able to re use so that printing expense is largely cut y Compatible chips HHIC102R Chip resetter can reset the following chips HHIC102B series HH10 11 12 13 82 84 85 88 u Usage Step 1 Step 2 Step 3 Insert to the ink cartridge s Let the resetting contact Press resetting button chip fully match with the chip till the indicator light turns to green Step 4 Release the resetting button pull out the chip resetter refill ink and then install the ink cartridge U Cautions Do not press the resetting button when inserting and pulling out the chip resetter Do not pull out the chip resetter when the indicator light is flashing or chip damage will be occurred easily Troubleshooting Indicator light does not work or it is out after a flash It may be caused by a Poor contact of chip and resetting contact b Insufficient power To solve the problem you can a Pull out the chip resetter and insert it again to let the resetting contact fully match
Download Pdf Manuals
Related Search