User guide - Telefunken
Contents
1. Tho slide show begins after a few seconds 4 Choosing the image source When the frame is in slide show mode and photos are being displayed point the remote control 00 3 at the frame and thon press EXIT twice The screen on the loft appears fig 4 Select the desired source memory card or intemal memory with the lft and right arrows of the remote control ig 3 then press the remote controls ENTER button to confirm your choice Press ENTER again to launch the side show that you have chosen TELEFUNKEN pL nd la Digi 4 When tho frame is in slido show mode and photos are being displayed press twice Tho screen on tho left appears fig 4 Select the desired side show card or intemal memory with the buttons thon press twice fig 5 5 Selecting a fixed image When the frame is in sido show modo and photos are being displayed point the remoto control at the frame and then press EXIT once The frama thon displays the image s thumbnails Select tho desired photo using the remote control s arrow buttons left right up and down than press ENTER The selected image is displayed and doesnot change If you press ENTER once more the slide show begins again When the frame is in side show mda and photos are being displayed pres 9 onc fe images are displayed in thumbnail om Select te philo usi te buttons and ten press ENTER Tho selected imago is displayed an2. You can adjust the display duration of your side shows images with 5 diferent possibilities 35 Ss 10s 30s 60s The default is 35 When the Is in slide show mode and photos are being displayed press the remoto control s EXIT button once to leave the slide show and thon press SETUP The menu is displayed Using tho remoto control s UP DOWN buttons highlight the display time lino and then press ENTER The different durations appear fig 10 Select the desired duration using the UP DOWN buttons and thon press ENTER to confirm your choice Next press EXIT lo leave the men and then ENTER to launch tha slide show again When the frame is in side show mode and photos are being displayed press to leave the slide show and then press TELEFUNKEN Mu Highlight the Display timo lino using the buttons then press The diferent durations appear lig 10 Select the desired duration using the buttons and thon press to conim your choice Press to loave the menu and then press to launch the sde show again 6 Slide show type By default DIGICADRE displays images during the slide show in the order in which they ware introduced into or saved onto the internal memory If you prefer you can select random slide show to randomly select the photo order in the lio show When the frame is in slide show modo press the remote control s EXIT button once to leave it and then press SETU
3. offers optimal transfer speed however DIGICADRE wil also work with a USB 1 1 In this case the folowing message may appear when connecting DIGICADRE to tho PC This device can perform faster if you connect itto a high speed USB port Make sure to keep tis in mind Tum on the computer leave the DIGICADRE tumed on Connect tha small USB connector cable DIGICADRE Check that it is wel connected Connect tha oor ond of he USB cable to a USB port on your computer Swich on DIGICADRE Afer a iow seconds the message Now device detected appears on the computer screen Walt few moments uni the installation has completed As soon as the massage Your hardware has been instaled and iS ready for use appears double cick on tha My computer icon 6 new romovabla har disks can be seen 19 26 TELEFUNKEN peee 2 Transferring images from the computer to the internal memory Double click on the icon of the last reader 19 26 Tho images appear Open tho folder containing the documents that you want to transfor from your computer Next select the images Press Ctt and A simultaneously you want to select all images OR Hold the koy down and click on all desired photos Drag the images to the image window of the frame s interna memory Transferring images from the internal memory to the computer Double click on the icon of the last reader 10 26 The images appear Open tho folder into
4. Multiple display mode This modo allows you to simultaneously display 2 3 or 4 images depending on their orientation vertical or horizontal When the frame is in side show mode and photos are being displayed press the remote controls EXIT button once and then press SETUP The menu is displayed Use the UP and DOWN buttons unti the Multiple display ine fig 7 is highlighted Press ENTER Two lines appear Activate and Nona With the up down arrows highlight the option that you are interested in If you highlight the Activate option mulple display will bo selected If you select the Nono option tho standard full screen display will bo activated Press ENTER to confirm your choice then EXIT to leave the manu Press ENTER to launch the side show again TELEFUNKEN aa cadre Cadre photo num rique When tho frame is in side show mode and photos are being displayed press tho button once and then press 7 Using the buttons highlight the Multiple display lino Press to display the options Using the 75 buttons highlight the option that you are Interested in None or Activate then press Next press F to exit the menu followed by to launch the slide show again 3 Image dimension The ratio of the 14 1 DIGICADRE is 16 10 This means that images with another ratio 4 3 for photos output from compact digital cameras or 3 2 for tha majority of digit
5. faded or made The guarantee cannot be reclaimed if the digital frama has been repaired altered modified by the purchaser or any other person who repairs it and is not authorised and qualified m The manufacturer does not guarantee the technical properties described in this manual The hardware and accessories described in this manual are subject to modification without notico Because of this the producer reserves the right to modiy the contents the options the properties and the documents linked fot without notice XI TECHNICAL PROPERTIES Model N 14001 Product Digital photo frame with 14 1 screen Resolution 1280 x 800 pixels JPEG compatible Compatible cards Memory Stick Memory Stick Pro SD Mini SD Compact Flash and 128 MB Internal memory Menu in 7 languages FR GB I P NI D E Position of the screen adjustable on 4 levels Adjustable contrast brightness colour and hue Adjustment buttons on the frame Nine transition effects of the slide show viewer Adjustable display times Storage temperature 25 C to 70 C Operation temperature 0 C to 55 C Viewing angle CR gt 5 Power supply Input 100V 240V AC 50 60 Hz Output 9V DC 2A Weight 1700 Dimensions 457 x 341 x 45 mm System compatiblity Windows XP Accordance with tho rules in force This digital frame conforms to EC standards in forco and is compatible
6. Sr d Zoom Thanks to the zoom function you can enlarge part your image to fit the entira screen 1 2x 4x 80 When tho frame is in sido show mode and photos are being displayed press EXIT to display the thumbnails Select the photo that you wish to enlarge with the remote control s UP DOWN RIGHT LEFT buttons Press ENTER to display it full screen and than press the remote control s ZOOM button as many times as needed to zoom into the image fi 16 Next press EXIT followed by Slide show to launch the side show again When the frame is in sido show mode and photos are being displayed press to leave the side show and to display the thumbnails TELEFUNKEN ae ume With the buttons select the photo that you wish to zoom into Press the button to display the image in full screen mode and then press 19 18 Highlight the Zoom lino using the buttons and than press to zoom into the imago 1 you would like to oom in again press the button agan flowed by Press to lave the menu and then press to launch the sido show again Image selection With DIGICADRE you can select tho images that will make up your slideshow among ali of your card s or internal mamory s images When tho trame is in slide show mode and photos are being displayed press EXIT to leave the slide show The images are displayed in thumbnail form Using tho RIGHTLEFT UP DOWN arrows choose the first i
7. which you want to transfer the images Next select the images Press Otr and A simultaneously if you want to select al images OR Hold the Ctrl key down and click on all desired photos Drag the images from the internal memory to the chosen folder E ME cadre a Cadre photo num rique VIII REMOVING THE BACK COVER AND CLEANING Warning Make sure that the Digicadre has been switched off before cleaning it Never use spray or liquid cleaner direct on the frame or on the plastic housing To clean your Digicadro you can remove the back cover To achieve this unscrew tho 4 screws situated at the back of your 8027 and gently remove the screen To replace the screen place it in the frame and screw back in the 4 screws To clean the screen Wipe the screen with the supplied swab to remove dust and other particles If the screen is stil not clean apply a window cleaner without ammoniac or alcohol onto a soft and clean cion To clean the plastic case Use a dry and soft cloth TELEFUNKEN Pm utum Q I put a memory card into my Digicadre but the frame does not read it What should 1do Maka sure that the card format is compatible with the frame Next make sure that the card has been inserted correctly into the corresponding slo Finally Switch off and switch back on your Digicadre so that the card is recognised by the reader Q Why do some photos load quicker than other
8. with the RoHS standard Recycling electrical and electronic equipment at the end of its fe Wom out electrical and electronic devices should not be disposed of with ordinary ex household waste Tho presence of his symbol ees on the product or its packaging is to remind you of this Certain materials tat this product is composed of can be recycled it you dispose of them in their associated recycling centre By using tho parts and raw materials of the worn aut devices you make an important contribution to protecting the environment For more information on collection locations of worn out equipment you can contact your town hall for worn out waste treatment services or at ho shop where you bought the product Sa ME
9. Model 14001 cadre Cadre photo num rique INDEX 1 Contents of the box IL Description of the frame JI Description of the remote control IV Installing the frame V Stating up Which images aro read by tho DIGICADRE 12 2 Inserting a card 12 c po M 4 Choosing the imago sourc TO 5 Selecting a frd image 14 6 Selecting aside show 15 Mu IIo ew INDEX 1 2 E 4 5 7 Using the menu Choosing the language Solectng the display type Image dimension Transtions between images Display duration of the photos Side show Cadre phota num rique cadre 16 17 18 19 21 22 24 Bak ae vii XI cadre Cadre photo num rique Hue adusiment Connecting to a computer 1 Transferring images trom the computer to the Digicadro 40 2 Transferring images from the Digicadre to the computer 40 Removing the back cover and cleaning FAQ Safety Warranty Technical properties ae Congratulations on your purchase of the TELEFUNKEN Digicadro 14 1 Please read the instructions and advice contained in this manual carefully before using the digital photo frame Important keep the packaging and objects contained therein Also keep this user manual for your own reference when needed L CONTENTS OF THE Ono digita photo frame One b
10. P The menu is displayed Highlight the Random slide show line with the remote contro s UP DOWN buttons and then press ENTER Two options are thon displayed 19 11 ae a E cadre Cadre photo num rique Select tho desired option using the UP DOWN buttons and then press ENTER to confirm your choice Press EXIT to leave the menu and then ENTER to launch tho slide show again When the frame is in sido show modo and photos are being displayed press tho button once to leave the slide show and then press 8 Highlight Random slide show using the butions and then press Two options then appear 4 11 Select the desired option using the 9 buttons and then press to confirm your choice Press to leave tho menu and thon to launch tho sido show again TELEFUNKEN pe 7 Image operations a Copying photos Copying a photo from the memory card to the Internal memory is possible with DIGICADRE When tho frame is in slide show made and photos are being displayed insert your card and press the EXIT button twice The screen fig 12 is displayed With the remote control s RIGHTILEFT buttons select the memory card and then press ENTER twice The memory card s images aro then displayed in the slide show When the frame is in slide show mode and photos are being displayed press EXIT The image s thumbnails appear Select the imago you wish to copy using the remote con
11. a reflex cameras are not entirely displayed The top and bottom of the imago wil be trimmed Thanks lo the image dimension menu you wil be able to adapt the screen display to the size of your photos Origial your photo will be fully displayed but there wil be black lines on the sides Oplimal The image wil bo cropped to fit ii to full screen but note that the top and bottom willbe trimmed Warning Do not confuse image resizing with zooming into images Resizing is actually applied to al images while zooming only applies to the image currently on the screen Pm aa Y cadre Cadre photo num rique When the framo is in slide chow moda and photos aro being displayed press tho remota control s EXIT button once and then press SETUP The manu is displayed Use the UP and DOWN buttons unti the Multiple display ine ig 8 is highlighted Pross the ENTER button to display the options then solect the desired image size using the UP and DOWN buttons Press ENTER to confirm your choice and then press EXIT to leave the monu Press ENTER to launch the slide show again your images wil be displayed in the desired dimension When the frame is in slide show mode and photos are being displayed press tho button once then press Highlight the Image dimension fig 8 line using the buttons Press to display the options Select the desired size with the buttons then press to conim your choice Pres
12. al images wo recommend connecting the DIGICADRE to the PC see page 40 b Deleting photos Deleting a photo from the interna memory is also possible To achieve this switch off your DIGICADRE remove the card and switch the back on The images in the internal memory are then displayed When the frame is in slide show mode and photos are being displayed press EXIT The image s thumbnails appear Select the image you wish to delete using the RIGHTILEFT UP DOWN arrows the selected image is outlined in blue TELEFUNKEN ae Sr E cadre Cadre photo num rique When the choice has been made press the remote control s SETUP button to display the menu Highlight the Delete photo lino with the UP DOWN buttons then press ENTER to display the options 19 14 Select the desired option and then press ENTER The image is then deleted from the internal memory Repeat this procedure lor images that you wish to delete Press EXIT to leave the menu and then press the Side show button to launch the slide show again When the frame is in side show modo and photos are being displayed press 0 The images are hon displayed in thumbnai iom Select the image hat you wish to delete using the buttons When the choice has been made press Highligh the Delete photo withthe butions thon pres to display the options ig 14 Select tha desired option and then press The image i
13. d does not change To alum ote ide show pres and no side Sow begins again 6 Selecting a slide show When tho frame is in thumbnail display mode press the remote control s Sido show button onco When the frame is in thumbnail display mode press the buton twice TELEFUNKEN Cadre photo num rique USING THE MENU Choosing tho language The defaut language is French To choose another one the menu must fist be accessed When the frame is in slide show mode and photos aro being displayed press tho EXIT button to leave the side show and thon press SETUP to display the menu screen On the thirteenth line the language is displayed fig 6 would lika to change it use the remote control s UP or DOWN buttons unti the language line is highlighted in blue then press ENTER Every time this button is pressed a different language is displayed French Spanish Portuguese Dutch English Italan German Once the monu is displayed in the desired language press EXIT folowd by ENTER When the frame is in slide show mode and photos are being displayed press 7 once Tha menu screen is displayed PR p cadre Cadre photo num rique Press tho buttons unti the language line 10 6 is highlighted then press as many times as needed until accessing the desired language Finaly press then 2 Selecting the display type TELEFUNKEN DIGICADRE offers an exclusive function
14. digital photo framo and does not include accessories The following are considered as accessories Tho mains voltage adaptor block The remote control according to model Warranty period This digital frame includes a 12 month duration warranty beginning on the purchase date Tho warranty should be proved by showing the original invoice or the receipt on which t dalo and model bought appear Eu Cover A defective digital ramo should be returned complete to your supplier with a note explaining the problem If this digital framo shows a defect during the warranty period the authorised After Sales service wil repair al defects or any manufacturing imperfections The After Sales Service wil decide unilaterally to entirely or partially repair or ropiaco the digital frame The intial purchase date determines the dato that the warranty period begins Tho warranty period is not prolonged if the digital ramo is repaired or replaced by our after salas service Exclusion Damages or faults caused by misuse or mishandling the digital frame and by using accessories other than the original ones or ones that are not recommended in this manual aro not covered by the warranty Tho warranty does not cover damages caused by outer elements such as lightning water or fire or any other damage caused during any transport The warranty cannot be reclaimed if the digital frame s serial number has been modified removed
15. e framo in the vertical portrait position unscrow the 4 thumb whools that are found at the base and turn the support sot ona quarter of a revolution Screw the thumb Wheels back on and set the support on tho marks numbered 3 or 4 2 Electrical connection Plug the end of the mains adaptor into its socket and then connect tho other end to tho wal socket aa v STARTING UP 1 Which images can be read by DIGICADRE DIGICADRE reads JPEG images o images from digital cameras It you use image editing software Photoshop Paint shop pro etc make sure to save as an entry level JPEG and not as a progressive JPEG or any other type of JPEG If you want to view images in black and white on your DIGICADRE mako sure that they are in AGB format and not in grey level format l they are saved in grey level format you can display these as thumbnail images but not in full screen DIGICADRE s screen resolution is 1280 x 800 pixels You can read images with a higher resolution ut the display ime may ba slowed down 2 Inserting a memory card Insert the memory card containing images to be read into its intended slot Slot 1 for SD mini SD or MMC cards Slot 2 for Compact Flash or MD cards Slot 3 for Memory Stick Memory Stick Pro Memory Stick Duo or Memory Stick Pro Duo cards as LI 2 3 cadre Cadre photo num rique 3 Switching on Tho slide show begins atter a few seconds
16. e show again p cadre ca Cadre photo num rique Press F and then 88 Tho monu is displayed 10 18 Highlight Brightness and thon press An adjustable brightness bar is displayed on the screen 19 19 Press to adjust the brightness Next press twice to return to the thumbnails Press control s EXIT button and then press SETUP The menu is displayed 6920 Highlight Contrast with the UP DOWN arrows and then press ENTER An adjustable contrast bar is displayed on screen fig 21 Press the RIGHTILEFT arrows to adjust the contrast Next press EXIT twice and then Sido show to launch the slide show again LN TU mentre Press Mand then The menu is displayed 10 20 Highlight Contrast using the keys and then press 3 An adjustable contrast barf displayed on the screen 0921 Press the arrows adjust the contrast Next press folowed by twice to launch the sideshow again i Colour Press the remote control s EXIT button and then press SETUP Tho menu is displayed 19 22 Highlight Colour using the UP DOWN arrows and then press ENTER An adjustable colour bar is displayed on screen 10 23 Press the RIGHTILEFT keys to adjust tho colour Next press EXIT twice followed by slide show to launch the slide show again ae umet Cadre photo num rique Press the button followed by Tho monu is displayed 19 22 Highlight Colour using t
17. he frame Thus all parameters that you have programmed wil be replaced with the default parameters Multiple display deactivated transitions random display duration 3s random slideshow activated language French To access this function press the remote control s EXIT button to leave the slido show and then press SETUP The menu is displayed Using the remote controls UP DOWN buttons highlight Reinilalso and then press ENTER The two options appear ig 17 Select the desired option using the UP DOWN buttons and then press ENTER to confirm your choice Press EXIT to leave tho monu and then press SLIDE SHOW to launch the sido show again TELEFUNKEN Pu DER RR NH cadre Cadre photo num rique Press the button once to leave the slde show and then press Highlight Reinialiso using the 83 buttons and then press The two options are displayed fig 17 Select the desired option using the 4 buttons and then press to confirm your choice Press to leave the menu and then press to launch tho side show again 9 Brightness Press the remote control s EXIT button and then press SETUP The menu is displayed fig 18 Using the UP DOWN arrows highlight Biightnoss and then press ENTER An adjustable brightness bar is displayed on screen 10 19 Press tho RIGHTILEFT arrows to adjust the brightness Then press EXIT twice followed by the Slide show button to launch the sid
18. he frame s screen or the power supply Try to avoid connecting the digital photo frame onto a high powered cable This can cause overheating fire or an electric shock E Be careful when connecting the power supply cable this should not be leaned on or in contact with other objects Do not place the lead under a carpet Check the lead s condition regulary to avoid any damages ithe lead is damaged disconnect it and replace it Ventilation Tho memory card slots and the device openings aro used for framo ventilation To ensure optimal use of the framo and to prevent any overheating these openings should not be obstructed or covered Keep the digital frame at a sufficient distance from tho wall to ensure ventilation Do not place tho digital photo frame on a bed or couch so that any overheating can be avoided Warning Never remove the plastic housing found at the back of the frame The digital photo frame is mado up of electric circuits and they can injure you 1 touched Do not try to repair your digital framo alone E XI WARRANTY Tho warranty does not cover damages caused l you or any unauthorised technician have rid to repair ho framo Ifthe frame produces smoke noise or an unusual smell tum it off and disconnect it immediately and then contact your shop If you are not using tho digital frame for some time make sure to disconnect the power cable Tho warranty applies to the
19. ho 95 buttons Press An adjustable colour bar is displayed on the screen 19 23 Press tho arrows to adjust tho colour Next press followed by twice to launch the slide show again j Hue Press the remote controls EXIT button and then press SETUP Tho manu is displayed 10 24 Highlight hue using the UP DOWN arrows and then press ENTER An adjustable hue bar is displayed on the screen 10 25 Press the RIGHTILEFT arrows to adjust the hue Next press EXIT twice followed by Slide show to launch the side show again ae ite With the tramo Press the button and then press The menu is displayed fig 24 Highlight hue Press An adjustable hue bar appears on the screen 1925 Press the 3997 arrows to adjust the hue Next press twice followed by twice to launch he sio show again VII CONNECTING TO A COMPUTER Thanks to USB ports you can transfer photos from your computer onto your DIGICADRE and vico versa 1 System compatibility and connection The following system is compatible with DIGICADRE WINDOWS XP To connect DIGICADRE directly to a microcomputer l should have an available USB JS prs Make sure that your computer s configuration is compatible with DIGICADRE Software incompatiiltes or hardware can aria when connecting TELEFUNKEN can not in any caso bo hald responsible If the configuration doas nat conform The USB 2
20. lack acrylic back cov One mains voltage adaptor One remote control One user manual One USB lead One cleaning swab Il DESCRIPTION OF THE FRAME Your TELEFUNKEN Digicadre includes an acrylic back cover that can be removed a mair voltage adaptor a remote control and an LCD screen equipped with 2 USB ports and multiple card reader that is compatible with most memory cards available on tho market aa USE HOST por SE mini port SD cards mini SD cards en Mains voltage socket ST Back of the frame Adjustable support Frame s buttons Confirmation button nla buon Backward Forwand buttons Exit bunton Memu access E un Dig w lll DESCRIPTION OF THE REMOTE CONTROL Menu access Zoom Ext Rotate Confirmation bation Play Tp Tele Launch the Slide Show Stop the Slide Show INSTALLING DIGIGADRE 1 Inelining the frame Your Digicadre s inclination can be adjusted by bringing the adjustable support down Choose tho inclination that suits you best among the 4 dierent levels fig 1 by pressing and holding tho button located on the support and pulling the support down Set tho black mark white circle in fig 1 to be facing marks numbered 1 or 2 To sot th
21. mage of your selection the chosen image is outined in bluo and then press the SETUP button pE am me Highlight the Image selection line using the UP DOWN keys and then press ENTER The imago that you selected is then ticked top ight comer of the image Choose a second image using the RIGHT LEFT UP DOWN buttons The image selection lino is stil highlighted Press ENTER to confirm Repeat the procedure for al images that you wish to select Once you have finished selecting press EXIT and then Side Show The slide show will only display the images that you have selected When the frame is in side show mode and photos are being displayed press to leave ho sido show The images are displayed in thumbnail form Using the 7 buttons select he first image and then press the button Press the buttons unti the Image selection ine is highlighted and then press Your image is now selected Select a second image with the buttons and then press The image selection line is stil highlighted Press to confirm Repeat the procedure for all images that you wish to select Once you have finished selecting press S and then press twice The slide show wil only display the images that you have selected To deselect the images the procedure is identical i kome mma Cadre photo num rique Reinialising This function allows you to reinitialise t
22. s A High resolution photos load slower To reduce the loading timo it is better to adapt the resolution of your images to that of tho cada io 1280 X B00 pixels You can also use lower resolution photos Q Why can I not display a photo in black and white A Tho Digicadre can read black and white photos only if they aro in RVB mode and not in grey seale formal To keep black and white images in RVB al you have to do is the colours using image editing software Q Why are my images slower to load with certain cards A Thore are diferent card technologies Certain cards are slower than others when being read you are loading into internal memory card reading occurs faster peee SAFETY Handie te alal phot with precaution and avoid touching te screen fngerprints aro difficult to remove Always place the digital photo frame on a fiat and stable surfaco to make sure that it does not fall and get damaged Avoid oxposing the digital photo frame to the sun or elevated temperatures as this can damage the frame or reduce its lifespan Do not place it near heat sources such as radiators heating attachments etc Do not place the frame facing sunlight so that reflections can bo avoided Do not expose the digital photo frame to rain water or humidity Do not place it inside a sink or basin whore it could come into contact with water Never place heavy or sharp objects on the frame t
23. s the button then to launch the slide show again 4 Transition between the images You are able to choose the transition type between each of the imagos of your slide show TELEFUNKEN Mu There are 9 diferent possible transitions fade Inout vertical stripes cross mosaic blocks dimming lings enlargement sik screen lo which no transition and random aro added Random mode is programmed by default When the framo is in sideshow mode and photos are being displayed press the remote controls EXIT button once to leave the side show and then press SETUP The manu is displayed Using the remote control s UP DOWN buttons highlight the transition effects lino and the press ENTER The different transitions appear on screen 10 9 Select tho desired transition using the UP DOWN buttons and then press ENTER to confirm Press EXIT to leave the menu and then ENTER to launch the side show again When the trame is in slideshow mode and photos are being displayed press the button once to leave the side show thon press Using the buttons highlight the transition effects lino and then press The diferent transitions aro displayed fi 9 Select the desired transition using the buttons and then press to confirm your choice cadre Cadre photo num rique Press to leave the menu and thon press to launch tho side show again 5 Display duration of photos
24. s then deleted rom the internal memory Repeat ths procedure oral mages that you wish to doe Press F to leave tha menu and thon press twice to launch the slde show again Warning Deleting an imago from a memory card is not possible TELEFUNKEN umm mmm cadre Cadre photo num rique An image can be rotated when it is not correctly orientated for example Rotating an image When the frame is in slide show mode and photos are being displayed press the EXIT button to display tho thumbnails Select tho photo that you wish to rotate using the remote control s UP DOWN RIGHTILEFT buttons Press ENTER to display it in full screen and then press the remote control s ROTATE button as many limes as is needed to rotate the image to the correct orientation fig 15 Thon press EXIT followed by Slide show to launch the slide show again When the trame is in side show modo and photos aro being displayed press 1o leave the side show and to he thumbnails TELEFUNKEN TE E mme cadre 2 Cadre photo num rique Select the photo that you wish to rotate using the buttons Press to display the image in full screen modo and then press 19 15 Highiight Rotation using the 7 buttons and then press to rotate the image by 90 If you wish to rotate it again press followed by Press f to leave the menu and then press twice to launch the slide show again TELEFUNKEN Pu
25. trols RIGHTILEFT UP DOWN arrows the selected imago is outlined in bluo After making tho choice press the remote control s SETUP button to display tho manu RSS cadre Cadre photo num rique Highlight Copy photo using tha UP DOWN buttons and then press ENTER to display be options i 13 Select the desired option and then press ENTER and the imaga wil then bo copied onto internal memory Repeat this procedure for any images that you wish to copy Press the EXIT button onca to leave the menu and then press Slide show to launch the slide show again When the frame is in slide show mode and photos are being displayed press P Tho images are then displayed in thumbnail form Select the image that you wish to copy with the gt buttons the selected image wil be outlined in blue Atter making this choice press 8 Highlight the Copy photo line using the 9 buttons and then press to display the options fig 13 Select the desired option and then press The image is then copied to the internal memory Repeat this procedure for any images that you wish to copy Press to leave the menu and thon press twice lo launch the slde show again TELEFUNKEN umm ere cadre Cadre photo num rique Waring Copying an image trom the internal memory lo a memory card possible It is also not possible to copy several photos at the samo timo When you wish to copy sever
Download Pdf Manuals
Related Search