PRO+ LV A-145 User Manual (EN)
Contents
1. Copyright 2005 Alfano S A All rights reserved 7 DATA MENU While in the STOP mode Successively Press the left button to access the menus 1 to 8 29 000 r Sn pur 23 mam Menu 0 1 SYSTEM OFF 1 Press the right button gt gt Switching off the device Menu 0 2 RECALL 1 Press the right button gt gt Access to all laps 2 Press the right left button gt gt To consult the laps 3 Press the right button 1 sec on VIEW gt gt EE 4 Press the left button 1 sec on EXIT gt gt To exit Menu 0 3 Download Presenting the interface A 421 to execute the transfer of data to the PC or VISION A 181 Menu 0 4 BEST LAPS 1 Press the right button gt gt Access to the best lap of each exit 2 Press the left right button gt gt To consult the best lap of each exit To analyze the lap by 0 1 second with the 3 Press the right button 1 sec on VIEW gt gt left and rioht buttons 4 Press the left button 1 sec on EXIT gt gt To exit Copyright 2005 Alfano S A All rights reserved 8 Menu 0 5 THEORICAL LAP NOTE This menu is accessible if all laps consist of minimum 2 split times and that this number of split times is the same for all laps 1 Press the right button gt gt Access to the theorical lap 2 Press the left right button gt gt To consult the best split times 3 Pres2. Configure the high value hangover time RPM and speed during the course 1 Press the right button 2 Successively press the right button 3 Press the left button 4 Successively press the right button 5 Press the left button gt gt gt gt gt gt gt gt gt gt To enter the menu To regulate the hangover time of the RPM OFF at 4 4 seconds To select SPEED To regulate the hangover time of the SPEED OFF at 4 4 seconds To exit Menu 29 DISPLAY MASK Hiding the information on the screen during the course 1 Press the right button 2 Successively press the right button 3 Press the left button 4 Successively press the right button 5 Press the left button 6 Successively press the right button 7 Press the left button 8 Successively press the right button 9 Press the left button 10 Successively press the right button 11 Press the left button gt gt gt gt gt gt gt gt gt gt gt gt gt gt gt gt gt gt gt gt gt gt To enter the menu TIME To select ON OFF To enter the menu DELTA TIME To select ON OFF To enter the menu REF TIME To select ON OFF To enter the menu RPM To select ON OFF To enter the menu SPEED zs To select ON OFF To exit NOTE As soon as the PRO is in the START mode all configured inf
3. the option OFF after a period of 2 seconds Detection display of weak batteries When the batteries are weak the system will detect it and the 4 bright temperature detector lights will start blinking rapidly one by one When the device is in the START mode the system will automatically return to the STOP mode ten minutes after weak batteries have been detected and the message CHANGE BAT will appear It is absolutely necessary to replace the batteries since the system will refuse to restart in the START mode and access the menu Config System gt gt MENU CHANGE bAT ste Note a power cut while the ALFANO is in the START mode risks provoking a deterioration of the registered information During the display of detected weak batteries the other bright lights and the background light will automatically switch off in order to reduce energy consumption Replacing the batteries Important it is imperative to use quality batteries from big brand names to avoid these from running in the device An interruption provoked by the battery s acid cancels the warranty Prior to replacing the batteries always verify that the device is switched off take off the lid of the battery compartment remove the old batteries and afterwards place the two new batteries by verifying that the symbols et correspond to those engraved on the exterior of the compartment Protective hoods IMPORTANT the por
4. press or successively press 7 the right button on the DOWN arrows ES Le reduce the number Continue to press or successively press S the right Burton on the UP arrows SES To increase the number 9 Press the right button ger e up the number of teeth of the big Continue to press or successively press 19 the right button on the DOWN arrows gt gt To reduce the number Continue to press or successively press Pe the right button on the UP arrows EE To increase the number 12 Press the left button gt gt To exit the menu NOTE The measure is represented either in MILLIMETER Metric or in INCH Imperial gt Menu 19 3 EMPTY Menu 20 Menu 21 LAMBDA ON OFF Activate ON OFF or not the LAMBDA sensor NOTE when the LAMBDA sensor is in the ON position the 10 high LEDs of the PRO will solely function with the Lambda probe ae o amp A e dell dereen El aA Poor Good Rich 1 Press the right button gt gt To enter the menu Copyright 2005 Alfano S A All rights reserved 14 To activate ON OFF or not the 2 Successively press the right button gt gt LAMBDA sensor 3 Press the left button gt gt To exit NOTICE When the LAMBDA sensor is activated ON this sensor will replace the sensor of temperature T2 k or the VALVE sensor according to the previous configuration Menu 22 VALVE ON OFF
5. the seller at the moment of sale The manufacturer undertakes to repair and replace free of charge any parts which have a manufacturing defect during the guarantee period Any defects which cannot be clearly attributed to the material or the manufacturer will be examined at one of our approved after sales service centres and invoiced depending on the results The guarantee does not apply in cases of opening the device of accidental damage negligence or inappropriate usage in cases of installation which is unsuitable erroneous or does not comply with the instructions appearing in the notice and in cases of phenomena not associated with the rules for operation and use of the device The guarantee is invalidated in cases of repair or handling carried out by unauthorised third parties Intervention under guarantee does not give the right to replacement of the device or to extension of the guarantee Intervention under guarantee is carried out at one of our approved after sales service centres or at our head office In the latter case the item must reach our establishment postage paid in other words the transport costs are borne by the user The manufacturer accepts no responsibility in case of damage to persons or goods caused by poor installation or incorrect usage of the device Modifications to products Alfano SA applies a method of ongoing development Consequently Alfano SA reserves the right to make changes and improvements to any product descri
6. Activate ON OFF or not the VALVE sensor 1 Press the right button gt gt To enter the menu 2 Successively press the right button gt gt To activate ON OFF or not the VALVE sensor 3 Press the left button gt gt To exit NOTICE When the VALVE sensor is activated ON this sensor will replace the sensor of temperature T2 k or the LAMBDA sensor according to the previous configuration Menu 23 VOLTMETER ON OFF Activate ON OFF or not the VOLTAGE sensor 1 Press the right button gt gt To enter the menu 2 Successively press the right button gt gt To activate ON OFF or not the VOLTM sensor 3 Press the left button gt gt To exit NOTICE When the VOLMETER sensor is activated ON this sensor will replace the temperature sensor Ti k Menu 24 Menu 25 Menu 27 NAME Edit To make your name or a sentence of maximum 21 characters appear on the screen 1 Press on right button gt gt To enter in the menu 2 Press successively the right button gt gt To choose the letter the number needed 3 Press the left burton amp SS To confirm and position on the following case 4 Press the left button after the 21st case gt gt To exit Copyright 2005 Alfano S A All rights reserved 15 NOTE Your name or the sentence will appear on the screen on activation and on extinction of the system during 4 seconds Menu 28 PEAK
7. WER CHRONOMETRIC SYSTEM PRO LV 4 145 x d e eo Ki Ta ki e e User Manual EN PRO LV A 145 RPM Lambda RPM REF TIME ya Best Previous gt Target Delta Time a omna Es N ssert mE m TH e 127 E HE pa H S ka 1 Voltage T2 Lambda Valve Speed STOP In START Counter 1 Time Counter 2 Distance In STOP Bests Data Counter 1 Time Counter 2 Distance In STOP normal impuls In MENUS Enter Confirm O1 System OFF 02 Recall 03 Download N 04 Best Laps Download IR 05 Theoric Lap 06 Reset 07 Counter 3 Time Counter 4 Distance 08 Demo Lap Impuls 1S return STOP In STOP impuls 1S Config System 0 Strip Number 1 Strip Start 2 Strip Latency 3 Best Previous Target 4 RPM Strock 5 RPM Leds 6 T Alarm fre SES 8 Speed Config 9 GearBox 20 SS en e 21 Lambda ON OFF 22 Valve ON OFF 23 Voltmeter ON OFF 240 5 Zop e SS See E 27 NAME Edit 28 Peak 29 Display Mask 30 C F 31 Metric Imperial 32 Power 1 2 3 33 Power Intern Extern 34 Default 35 Version Impuls 1S return STOP Copyright 2005 Alfano S A All rights reserved 3 Connection of the sensors Backsi
8. bed in this document without prior warning Damages and responsibilities The products are used under the customer s sole direction and responsibility and consequently the customer shall bear the damages that the products might suffer or cause No compensation will be paid for removal of enjoyment and ALFANO cannot be held responsible for the direct or indirect consequences of their use or rendering useless ALFANO Ss obligations are duty of care and not a performance obligation The device must be disposed of with respect for the environment The stopwatch and its accessories contain a lot of plastic parts When the stopwatch or one of its accessories no longer functions they must be dealt with according to the laws of the country Spent batteries must be disposed of in accordance with the regulations in force in your country Copyright 2005 Alfano S A All rights reserved 19 ALFANO S A Rue de l Industrie 3b 1400 NIVELLES BELGIUM www alfano com Copyright 2005 Alfano S A All rights reserved
9. cessively Press the right button gt gt To configure the number of magnetic fields Menu 11 STRIP START To select the magnetic field on which the PRO must start Menu 12 STRIP LATENCY NOTE This menu is only accessible when one single field is configured in menu 10 This configuration is useful either to ignore one or several split times or to avoid acquiring other infrared ALFANO emitters placed on the circuit at an untimely moment This configuration does indeed allow you to program a time upon which the system will not react after having acquired the time per lap 1 Successively Press the right button gt gt NOTICE this programmed time must be absolute less than that of the time per lap 1 Press the right button gt gt To enter the menu Continue to press or successively press the Si To increase the time right button on the UP arrows S Continue to press or successively press the right button on the DOWN arrows SC To reduce the time 4 Press the left button gt gt To exit Menu 13 Best Previous Target In order to select the comparison mode of the last loop time aa m PUR12S FER Copyright 2005 Alfano S A All rights reserved 10 gt gt BEST in the best lap 1 Successively Press the right button to select gt gt PREVIOUS in the second to last lap gt gt TARGET in the programmed target time To program the target t
10. de ni RED 1 T Ki or T NTC1 or VOLTMETER RED 2 T K2 or T NTC2 or LAMBDA or VALVE GREEN MAGNETIC or INFRARED BLUE SPEED F RPM high sensitivity G RPM normal H 2 BATTERIES Type AA Code IEC R6 Information on data registration The system contains 2 data registration modes functioning automatically 1 Mode 1 PRINCIPAL the system registers all data of varying sensors every 0 1 seconds and up to 95 of the memory s capacity NOTE this mode is necessary for an in depth analysis of the data with the software VISUALDATA Afterwards ALFANO automatically proceeds to mode 2 2 Mode 2 ENDURANCE the system halts the registration every 0 1 seconds to leave space for the registration of the times with maximums and minimums RPM speed temperatures pressures for every lap and for more than 24 hours Copyright 2005 Alfano S A All rights reserved A Switching on the PRO Hold the two buttons left and right simultaneously pressed for two seconds By releasing the buttons the display appears and the system will ask you if you wish to activate the background screen or not If you wish to activate it press the right button to select the option ON On the other hand selecting the option OFF by pressing the left button or not doing anything the device will automatically select
11. ime wait 5 seconds at 2 the TARGET position gt gt So that the arrows would appear Continue to press or successively press the F S right button on the UP arrows ES 10 increase the time Continue to press or successively press the 7 right button on the DOWN arrows SS EE 5 Press the left button gt gt To exit Menu 14 RPM Strock Configuring the coefficient to display the RPM A select 10 8 6 5 4 3 2 5 2 1 Successively press the right button to gt gt 1 5 1 25 X1 X1 33 X1 6 X2 X4 X8 NOTE During the configuration and while the engine is running you can verify the RPM at the right bottom of the screen Menu 15 RPM LEDs Configuring the bright 10 LEDs functioning with the RPM NOTE the PRO contains 2 configuration methods Method 1 configuration at 3 levels A Configuring the RPM level 1 on LED 1 B Configuring the RPM level 2 on LED 7 C Configuring the RPM level 3 on LED 10 Afterwards the PRO will calculate the RPM interpolations for the other LEDs 1 Press the right button gt gt To enter the menu 2 Press the right button on LED 3 gt gt To confirm the selection of method 1 Continue to press or successively press the 3 right button on the UP arrows gt gt To increase the RPM of LED 1 Continue to press or successively press the right button on the DOWN arrows d To reduce the RPM of LED 1 5 Press
12. on on the DOWN arrows d To reduce the RPM of LED 1 5 Press the left button gt gt To regulate LED 2 Continue the same operations to regulate the other LEDs one by one until LED 10 6 Press the left button gt gt To exit Menu 16 ALARM T Regulating the 4 bright detector lights LOW temperature and HIGH temperature of T1 T2 Copyright 2005 Alfano S A All rights reserved 12 Press the right button to enter the menu and 1 gt gt The LOW level of T1 to regulate Continue to press or successively press the right button on the UP arrows de To increase the level Continue to press or successively press S the right button on the DOWN arrows SS To reduce the level 4 Press the left button to regulate gt gt The HIGH level of T1 Continue to press or successively press the right button on the UP arrows SS To increase the level Continue to press or successively press S the right button on the DOWN arrows SR To reduce the level 7 Press the right button to regulate gt gt The LOW level of T2 Continue the same operations to regulate the levels of T2 LOW and HIGH 8 Press the left button gt gt To exit NOTE in the STOP and START modes The temperatures are lower than the LOW levels The detector lights REMAIN ILLUMINATED The temperatures higher than the HIGH levels The detector lights ARE BLINKING Menu 17 Menu 18 SPEED Config Configu
13. ormation OFF will be hidden Menu 30 CAES Configuring the temperature measuring unit 1 Press the right button gt gt To enter the menu Copyright 2005 Alfano S A All rights reserved 16 2 Successively press the right button gt gt To select CELCIUS FAHRENHEIT 3 Press the left button gt gt To exit Menu 31 METRIC IMPERIAL Configuring the distance measuring unit 1 Press the right button gt gt To enter the menu 2 Successively press the right button gt gt To select METRIC IMPERIAL 3 Press the left button gt gt To exit NOTE METRIC For the speed Km h For counters 2 amp 4 meters KM For the adjustment of the wheel circumference mm IMPERIAL For the speed Miles Hour For counters 2 amp 4 Miles For the adjustment of the wheel circumference Inch Menu 32 POWER 1 2 3 Configuring the luminosity of the LEDs and background lighting of the PRO 1 Press the right button gt gt To enter the menu 2 Successively press the right button gt gt To select the POWER 1 2 or 3 3 Press the left button gt gt To exit NOTE The stronger the detector lights and the background light are the faster the batteries discharge Menu 33 POWER INTERN EXTERN Configuring the power source of the PRO Either the PRO takes its power from its own batteries In this case it is advisable to use with an eye toward energy efficiency of the batte
14. ries the mode INTERN the PRO automatically shuts off after 10 minutes of non use S Or the PRO takes its power from the battery of the vehicle with the A 431 In this case you can select the mode EXTERN The PRO never shuts off but is placed in hibernation mode after 30 minutes of non use and is automatically activated when the engine restarts Copyright 2005 Alfano S A All rights reserved 17 1 Press the right button gt gt To enter the menu 2 Successively press the right button gt gt To select INTERN EXTERN 3 Press the left button gt gt To exit Menu 34 DEFAULT Restoring the PRO with the factory parameters 1 Press the right button gt gt To enter the menu 2 Press the right button gt gt To confirm the restoration of the PRO 3 Press the left button gt gt To exit Menu 35 VERSION This menu gives you the possibility of seeing the serial number and the version of the software of your PRO NOTE Pressing the left button for 1 second at the start of any menu will make the system return to the STOP mode Copyright 2005 Alfano S A All rights reserved 18 Guarantee conditions All our devices have been subjected to in depth factory tests and are covered by a 24 month guarantee against manufacturing defects The guarantee comes into force from the date of purchase The date of purchase is the date indicated on the invoice till receipt given by
15. ring the speed with or without sensor With the speed sensor 1 Configuring the length of the wheel circumference 1 Press the right button gt gt To enter the menu 2 Press successively the right button gt gt To select ON gt ON sensor installed 3 Press the left button gt gt To confirm ON Continue to press or successively press 3 the right button on the DOWN arrows a To reduce the Circumference Continue to press or successively press F 5 the right button on the UP arrows gt gt To increase the Circumference 6 Press the left button gt gt To exit the menu Copyright 2005 Alfano S A All rights reserved 13 Without the speed sensor 1 Configuring the length of the wheel circumference 2 Configuring the number of teeth of the engine pinion 3 Configuring the number of teeth of the big axle 1 Press the right Burton gt gt To enter in the menu 2 Press successively the right button gt gt To select OFF OFF sensor NOT installed 3 Press the left button gt gt To confirm OFF Continue to press or successively press the right button on the DOWN arrows ES To reduce the Circumference Continue to press or successively press e 5 the right button on the UP arrows gt gt To increase the Circumference 6 Press the right button bas To set up the number of teeth of the engine pinion Continue to
16. s or after having pressed the button EXIT g t Return to STOP This screen will show you that You have another 69 minutes of registration time in the PRINICIPAL mode PRINCIPAL mode see page 3 Copyright 2005 Alfano S A All rights reserved 6 The START mode The information obtained during the course on the PRO As soon as you pass the magnetic field the screen following the configuration of the PRO and connected sensors will show you the following Time per lap Speed Best time Temperatures luminous alarm Previous time Lambda bright detector light Target time Valve ON OFF bright detector light Time gap DELTA TIME Battery tension RPM detector lights Other information during the course While you drive Access to counter 1 total time hour minute for a 1 Press the right button gt gt period of 2 seconds 2 Press the same button once Access to counter 2 distance run Km Miles for a gt gt more prior to the 2 seconds period of 2 seconds 3 After the 2 seconds gt gt Return to START NOTE the 2 counters 1 and 2 are reset to zero only during the erasing of the data by the menu 0 6 RESET This screen will show you M E NI 16 Number of exits 013 Number of laps of the last exit 129 Number of laps total
17. s the left button 1 sec on EXIT gt gt To exit NOTE During the consultation of the split times the text line at the bottom of the screen indicates the lap belonging to you see page 6 Menu 0 6 RESET 1 Press the right button gt gt Execution of the deletion Menu 0 7 COUNTERS 3 et 4 NOTE The 2 counters 3 and 4 can only be reset to zero in this menu Access to counter 3 total time 1 Press the right button gt gt honte 2 Press the right button gt gt Reset to zero time counter gt Press the left button SA Access to counter 4 distance run Km Miles 4 Press the right button gt gt Reset to zero distance counter 5 Press the left button gt gt To exit Menu 0 8 DEMO 1 Press the right button gt gt Access to all laps 2 Press the left right button gt gt To select the lap demo 3 Press the right button kee To start scrolling the selected lap in real time 4 Press the left right button gt gt To exit NOTE Pressing the left button for 1 second at the start of any menu will make the system return to the STOP mode Copyright 2005 Alfano S A All rights reserved 9 CONFIGURATION MENU While in the STOP mode press the left button for 1 second Afterwards press the left button successively to access the menus 10 to 35 D i 028 gt ee S FER IAS me Menu 10 STRIP NUMBER 1 Suc
18. the left button gt gt To regulate LED 7 Copyright 2005 Alfano S A All rights reserved 11 Continue to press or successively press 6 the right button on the UP arrows SH To increase the RPM of LED 7 Continue to press or successively press the right button on the DOWN arrows SS To reduce the RPM of LED 7 8 Press the left button gt gt To regulate LED 10 Continue to press or successively press A the right button on the UP arrows get UE Continue to press or successively press 19 the right button on the DOWN arrows Sg To reduce the RPM of LED 10 11 Press the left button gt gt To exit Method 2 configuration at 10 levels A Configuring the RPM level 1 on LED 1 B Configuring the RPM level 2 on LED 2 C Configuring the RPM level 3 on LED 3 D Configuring the RPM level 4 on LED 4 E Configuring the RPM level 5 on LED 5 F Configuring the RPM level 6 on LED 6 G Configuring the RPM level 7 on LED 7 H Configuring the RPM level 8 on LED 8 I Configuring the RPM level 9 on LED 9 J Configuring the RPM level 10 on LED 10 1 Press the right button gt gt To enter the menu 2 ee the left button followed by pressing the gt gt To confirm the selection of method 2 right button on LED 10 Continue to press or successively press 3 the right button on the UP arrows SR NN Continue to press or successively press 3 the right butt
19. ts of the unused ports must always be closed by furnished caps NOTICE Please only use a screwdriver of the type TX20 this type of screwdriver is provided to you together with your ALFANO Make sure you do not turn the screws to tightly You could damage the Copyright 2005 Alfano S A All rights reserved 5 The STOP mode 3 possibilities of being in the STOP mode 1 As soon as you switch on the PRO 2 In de START mode press the left button 3 In the START mode 10 seconds after the engine has stopped NOTE the STOP mode is the base of all other menus Indeed it is as of the STOP mode that it can be accessed either in the START mode or in the DATA menu or in the CONFIGURATION menu HES Sg Fur 128 IE i The information obtained in the STOP mode The best time The highest RPM The highest speed 1 Press the right button SS The highest temperatures LAMBDA For a period of 10 seconds Press the same button another 2 time before 10 seconds gt gt Access to counter 1 total time hour minute elapsed Press the same button another 3 time before 10 seconds gt gt Access to counter 2 distance run Km Miles elapsed After 10 second
Download Pdf Manuals
Related Search