Home

User's Manual - Airis Support

image

Contents

1. AIRIS POWER SERVER User Manual Rev 1 0 1 Select Enable radio button in URL Filter 2 In Site 1 please enter the URL address 3 Please repeat the step 2 to build more URL addresses not allowed 4 Click the apply button If the Site1 is given as www yahoo com any hosts in the intranet will not be allowed to connect to www yahoo com If you do not restrict any access from intranet to Internet please select the Disable radio button in the URL Filter IP Filter Setup IP Filter IP Filter Enable Disable IF Filter Group Frotocol Blocked Ports No Blocked Port Range tx j e E JP Ve Je ae e Je Je epe le le TR e e Se e le IP I ep le TP TP e eae 2 e E pele le TR e feme 2 de e e le le le e eae PP e Appl PP 4 JUDE ASHE The IP filter function is similar to URL Filter It provides further restrictions in access permission URL Filtering only blocks port number 80 HTTP In IP filtering you can assign a group of IP to be restricted You can block four individual ports or a range of ports in the same time So the specific group of intranet hosts cannot connect to these ports Please follow the steps 1 Select Enable radio button in IP Filter 2 Enter the IP address range in the format x x x x x e g 192 168 1 0 24 you would like to restrict the IP group 3 Select the Protocol 4 Enter the port number in Blocked Ports No There are four fields you can enter in any order or combination You can en
2. 3 Enter the contact information in System Contact field For example the phone number or the email account of the administrator 4 Enter the location of the unit the System Location field 5 Click the apply button AIRIS POWER SERVER User Manual Rev 1 0 System Reports When you select System Reports in the left menu of the web page four configuration items appear including System Information System Log URL Log and DHCP Lease Report Please refer to the corresponding section for these configuration items Basic Settings Network Settings Firewall Settings VPN Settings System Management System Reports User Management NAS Management AIRIS POWER SERVER User Manual Rev 1 0 System information System Information System Report Firmware Version 2 02 System Up Time 0 hour 36 min 47 sec Hard disk Status Disk Number Model Name Size SM ALE T Status HDD amp A ST3300831 4 293033 MB Pass Ready HDD B ST3300831 293033 ME Pass Ready Volume Status Type Available Size Total Size RAID Status RAID l Mirror 288401 ME 293033 ME Active Resynecing USB Device Information Position Vendor Product ID Device Type Fort Fort E Part L Fort D External Network Interface IP Address 192 168 1 106 Hardware Address D0 28 00 03 2f 00 Netmask 255 255 255 0 Max Transfer Unit MTU 1500 Tx Err Packets 240 0 Rx Err Packets 8266 0 Link Stat
3. TIPS If all you need is file transfer we suggest using the FTP server feature as it is faster and simpler If you must use the PPTP VPN feature then you can also disable the encryption under Properties gt Security to increase the performance Pinging You can test your network connection in various situations with this very simple method From a command prompt type in ping lt IP address gt or ping lt network name gt If there are replies then there is a connection running between the two machines By pinging the device name we also get the IP address of that device also Tee 1 Pinging 192 168 1 14 with 32 bytes of data Reply from 192 168 1 14 bytes 32 time lt ifms TTL 255 Reply from 192 168 1 14 bytes 32 time lt ifms TTL 255 Reply from 192 168 1 14 hytes 32 timetl ms TTL 255 Reply from 192 168 1 14 hytes 32 timetl ms TTL 255 Ping statistics for 192 168 1 14 Packets Sent 4 Received 4 Lost Hy lose Approximate round trip times in milli seconds Minimum ms Maximum ms Average ms MI ping nas Pinging nas 192 168 1 14 with 32 bytes of data Reply from 192 168 1 14 hytes 32 timetfl ms TTL 255 Reply from 192 168 1 14 bytes 32 timefl ms TTL 255 Reply from 192 168 1 14 bytes 32 time lt i ms TTL 255 Reply from 192 168 1 14 hytes 32 time lt ifms TTL 255 Ping sta istics for 192 168 1 14 P ckets Sent 4 Received 4 Lost Cx lose A
4. now teacher school com DDNS e mail addresses work in a similar manner For example if teacher is the user on the appliance and the domain name DDNS is school dyndns org then the e mail address would then be teacher school dyndns org Sending and receiving e mail You can use any POP e mail type program to retrieve and send your e mails Windows includes MS Outlook Express as a standard application Start Outlook Under Tools gt Mail you want to ADD a mail account Enter a display name the formal name you want your e mails to appear to come from Usually your full name In the e mail address field enter your new e mail address From the above example we would enter teacher school com or teacher school dyndns org Under Incoming mail server and Outgoing mail server enter your domain name In the above examples it would either be school com or school dyndns org Both fields should be the same Lastly enter the Account name and password This name is the same one as on your appliance In this case user name is teacher and password is Click on the Finish and you are ready to send and receive e mail NOTE Passwords are highly suggested for all e mail account users to protect your e mails and to prevent people from unauthorized use of your e mail server Windows USB Printer Server standard USB 1 1 and 2 0 printers can easily be shared between Windows users on the network wi
5. progress of the initialization will be displayed Status Formatine 18 1 You can also view the progress by S M A R T returning to the main wizard screen Disable Once the HDD is formatted the status will change to Ready If you select RAID 1 you will also see progress of resyncing on RAID Status field gt M A E T Status Disable Ready RAID status Active Resyncing Total Size 293033 ME 53 AIRIS POWER SERVER User Manual Rev 1 0 Disk size will be shown in size field column as illustrated in Figure 3 8a Hard Disk s Availability Disk Mumber Model Name S M A E T Status HDD A ST330083 1 293033 ME Pass Ready HDD B ST3300831 293033 ME Fass Ready Figure 3 8a After initializing to RAID 1 Mirror you should see a screen similar to Figure 3 8b where total size is the same as the original hard disk size If the size of Volume Status Type Available Size Total Size RAID Status RAID LiMirror 258401 ME 293033 ME Active Resyncing 0 Disk 1 and Disk 2 is different then RAID 1 s total size would automatically select the smaller one as its baseline However we suggest you to use the same size when choosing RAID 1 Figure 3 8b After initializing to RAID O Stripe as shown in Figure 3 8c you can see that total size is the sum of two hard disks Please be reminded that the total size of RAID 0 would always be the sum of Disk 1 and Disk 2 Volume Status Type Available Siz
6. switches for each cable connection This is because the LAN ports support auto MDI MDIX LAN Ports The LAN ports are used to connect to a PC server hub switch or other network devices on the intranet Reset Button If you forget your password and or IP settings you will not be able to access the SA You can use the Reset Button to restore the factory settings To initiate a reset you must hold the button for at least 5 seconds The primary default settings are listed in the following table Configuration Item Default Settings Internal IP address 172 16 1 1 Power Button You can use the Power Button to turn on off Powerful Server AIRIS POWER SERVER User Manual Rev 1 0 Description of LEDs Description of LEDs O Off Power Off O HD Indicator LAR WANILAK Throughput 3 LEDs on Current transfer rate is gt 100KB s 4 LEDs on Current transfer rate is gt 500KB s Package Contents Powerful Server Power Adapter and Power Cord Ethernet cable User Manual CD Quick Installation Guide AIRIS POWER SERVER User Manual Rev 1 0 Quick Installation This chapter will give you brief instructions on how to install the product In section 2 1 we will configure the hardware part ofAIRIS Power Serverstep by step In section 2 2 we will check whether the IP address of your PC is assigned by DHCP Once we complete the installation of theAIRIS Power Serverhardware and checked your PC settings we will use the web b
7. that the computers accessing the NAS are on Windows 2000 XP users can use a different workgroup name if desired Click Next to continue Step 1 Set default information for file sharing Workgroup Name Morkgroup Computer Description HomeNas share Folder NamelShae sd Next Canc You can find your workgroup name by right clicking on My Computer and selecting Properties General Network Identification Hardware User Profiles Advanced Windows user the following information to identify your computer on the network Full computer name acc kevin Workgroup ACC To use the Network Identification Wizard to join Hetwork D domain and create local user click Network ID To rename this computer or join domain click Properties Properties AIRIS POWER SERVER User Manual Rev 1 0 You must assign at least Step 2 Set user security for default file sharing one user to this share folder Workgroup Name Workgroup Share Folder Name Share 1 Highlight the user on the list to the right 2 select the ER Te Tes permission you want them EE User List Denying User List to have Read Write or 1 Read Only 3 click on the 3 lt button to move the user EN over to the Allowing User List Next P Cancel Highlight users on the left list and select the gt button to remove them from the share or change their permissions Click Next to continue Intialization RAID Format Percentage 44 The
8. the IP address of your host in My IP Address Enter the IP address of the server in Server IP Address a oe dl In the following chapters we will cover more details of configuring the SA 21 AIRIS POWER SERVER User Manual Rev 1 0 Configuration Hierarchy This chapter gives you an overview of all the configuration options available The Powerful Server appliance is a multifunction product The section3 1 explains the corresponding settings for each function And in section3 2 we describe the power management in detail There are eight main categories in configuration menu Basic settings Network settings Firewall settings VPN settings System management System reports User management and NAS management Each item has advanced configurations See Figure 3 1 AIRIS POWER SERVER User Manual Rev 1 0 Overview of Configuration Menu Figure 3 1 Basic Settings DHCP Server P Alias Network Settings Multiple NAT Route Settings DONS Virtual Server URL Filter Firewall Settings P Filter Logo Page VPN Settings Denial of Service PPTP Settings Administrator Settings Event Report Setlings System Firmware Update Management Time Settings SNMP System Information System Log URL Log DHCP Lease Report System Reports Users User Management Groups RAID Initialization Wizard USB HD Info NAS Management USB CD DVD Info Buming Wizard Erase CD DVD Advanced File Sharing Email Sesrv
9. to assign another IP addresses like 192 168 1 x to the LAN then there is an issue 192 168 1 x and 192 168 0 x are not in the same network We need IP Aliasing to resolve this issue IP alias allows one network interface to contain more than one network It allows the additional network 192 168 1 x to be recognized by the SA Please follow the steps to add another network 1 Enter 192 168 1 1 in IP Alias 1 2 Enter 255 255 255 0 in Netmask of IP Alias 1 3 Click the apply button Note that the IP Alias 1 192 168 1 1 is assigned toAIRIS Power Serverand the network is 192 168 1 x For additional IP addresses of the internal network interface to be accepted enter the other IP address in IP Alias 2 and IP Alias 3 Enter 0 in each field if none 26 AIRIS POWER SERVER User Manual Rev 1 0 IP Alias Internal IP Alias IP Alias 1 192 1 1688 Netmask of IP Alias 1 255 255 253 D IPAlias2 0 JP J P JO Netmask of IP Alias 2 JP J P e IPAlias3 0 0 J P 1 0 Netmask of IP Alias 3 0 J P 1 0 Multiple NAT Multiple MAT Mutiple NAT Internal IP Range 1 12 p External IP Range 1 10 0 o B J P Internal IP Range 2 0 0 o 0 0 External IP Range 2 D o o If you get several fixed IP addresses from your ISP and the ISP restricts the bandwidth for each fixed IP address you have to prevent the network p
10. uses DNS servers to lookup domain names and translates then into IP addresses Domain names such as www yahoo com are just easy to remember aliases for IP addresses A dynamic DNS service provides a means of updating your IP address so that you listing will be current when your IP address changes There are several services on the Internet that are available for free We will only cover one www dyndns org You will need to register with the service and setup a 29 AIRIS POWER SERVER User Manual Rev 1 0 domain of your choice from the list they provide for you The DDNS service in our device works by uploading your new WAN IP address to the servers when it changes You would only need to enter the account information in the DDNS setup page of your unit How to setup a DynDNS DDNS account 1 2 Ne TUE Access the DynDNS homepage www dyndns org If you have not registered click Sign Up Now to create a new account Follow the instructions to create a free DDNS account Requires only e mail address Log into your account by providing a username and password Select Services from the top menu Select Dynamic DNS from the choice of services Select Add A Host from the Your Hosts section Follow the instructions Note your hostname so you can input it in the DDNS configuration for your device You can setup additional host names for additional devices Please follow the steps below to setup DD
11. 0 The following two pictures demonstrate how to setup the TCP IP printer port under Windows 2K XP As mentioned before if the printer connected to USB port position we will name it as PortA So when you want to setup LPR protocol the Queue name should be filled with which port you plug in And LPR Byte Counting Enabled is required For the Raw mode the port number 9100 is represented as PortA and 9101 is PortB etc Port Settings Port Mame 1P17216 11 Prater Mame ar IP Address 172161 1 Protocol Baw GILFR Raw Settings T Pot Humber 3100 LPR Settings Queue Name Portal I LPR Byte Counting Enabled I SNMP Status Enabled Lak EN Mette Public Configure Standard TCP IP Port Monitor PK Configure Standard TCP IP Port Monitor PK Port Settings Port Mame 1P 17216131 Printer Mana or IP Address 172161 Protocol 3 Raw Settings Port Humba 9100 LPR Settings C eure Name Portes LPR Bute Counting Enabled C SNMP Status Enabled AIRIS POWER SERVER User Manual Rev 1 0 Appendix A PPTP VPN W2K and XP only Important Make sure that the subnet of your Appliance is different the network you are trying to connect from For example User s office IP addresses are 192 168 1 x set your Appliance to 192 168 2 1 Netmask 255 255 255 0 Make sure that you have created a user account and password on the Appliance for t
12. AIRIS POWER SERVER User Manual Rev 1 0 PPTP Settings PPTP Server Setting PPTP Server amp Enable Disable Server IP Address 172 161 Client IP Range 472 16 1 2 172 16 1250 Figure 6 1 AIRIS POWER SERVER User Manual Rev 1 0 System Management When you select the System Management item in the left menu four configuration items appear including Administrator Settings Event Report settings Firmware Update Time Settings and SNMP Please refer the corresponding section for these configuration details Basic Settings Network Settings Firewall Settings VPN Settings System Management System Reports User Management NAS Management Administrator Settings Administrator Settings Administrator Management New Password jasso lat least 4 characters no white space Confirm New Password jasses lt External Admin Enable Disable External Admin port 2080 1 9000 Power down Yes No Restart device C Yes No Clear event log Yes No Clear DHCP lease Yes No Restore factory default Yes No Apply coud In Administrator settings you will find the basic administrator functions The settings are easily modified and managed by the administrator They are described as below AIRIS POWER SERVER User Manual Rev 1 0 1 New Password the administrator could change the administrator password here Please enter the new password you would
13. IS POWER SERVER DHCP Lease Report DHCP Lease Report Total Leases 1 Page Lil Host name IF address Hardware address Start time ce ee ene Computer 172 16 1 2 OO DeagObicl l3 01 12 2000 LE tJ md User Manual Rev 1 0 Expired time 2l 16 55 OL 32000 y The DHCP Lease Report function reports all leased IP provided by DHCP server From this page you can find out which host was assigned to which IP address You can clear all the records through administrator settings Please refer to the section 7 1 Clear DHCP Lease AIRIS POWER SERVER User Manual Rev 1 0 User Management The NAS provides a client server environment for users to share files over the network File sharing works by authorizing the users or groups to access shared folders by their username and password When creating a new shared folder user and groups from the current list must be assigned When a user group tries to access the folder the system will check the list of valid users for the shared folder If the user group is included in the list the user group then has permission to access the shared folder User Management NAS Management Users For file sharing to work we have to allow users and or groups We create the user accounts here The admin and guest accounts are in the system by default and User Account Management cannot be User List removed The ep _ guest admin account is different than the one used to access the Ul and
14. NS on your SA iP oe PU IN 6 Select Enable radio button in DDNS Client Service field Select the DDNS service provider Enter the User name The user name you log in DDNS service Enter the password The password you log in DDNS service Enter the Host name The host name you register in DDNS service Click the apply button Every time your public IP changes theAIRIS Power Serverwill tell the DDNS server what your new IP address is Other users through the magic of DDNS will be sent to the right place 30 AIRIS POWER SERVER User Manual Rev 1 0 Firewall Settings When you select the Firewall Settings item in left menu of the web page four configuration items appear including Virtual Server settings URL Filter IP Filter setup and Denial of Service Please refer the corresponding section for each of these items Basic Settings Network Settings VPN Settings System Management System Reports User Management NAS Management Virtual Server Settings Virtual Server Virtual Server Enable Disable IP address Protocol Port Range pm 16 12 12 IP v A TCP v ma 0 0 TCP v 2 P 1 P TCP v 2 P 0 TCP v App lyg The virtual server service is a way to simulate multiple servers on the intranet You have several IP addresses within your LAN These IPs are not visible to the users from the Internet When servers are installed in the office that need to be seen fr
15. SRV200 Server User s Manual AIRIS AIRIS POWER SERVER User Manual Rev 1 0 Table of Content kal ne SG LD og 110 0 EE EE EE ME 3 Product Specifications a er ne 3 Benefits and Key Features ss 4 Physical Parts and Panel of the Powerful Server 8 FaK GE CONO EE 10 kb 11 Hardware IMSTAM ALON eicsisessntdcsssarsuserccsduendwnds cigsdsvuesieesaesadupsdvencendetsasastvamwes 11 Check Your PC First 12 Connect to the Web Based Manager 14 Web Based Manager Basic Settings 16 COMMS AGO EE EC 22 Overview of Configuration Menu 23 NER SE 24 Firewall Settings EE 31 FNS 35 System Management 37 gt 2 210 01 i 2 0 EEE eee 43 User MAR ES 48 NAS MAROC OR a 50 MP vr 63 PN DN 65 EE AL EE EEE ENE 66 Windows USB PSN 67 VND D SI RUE LR ston A E EE EE A AT 70 AIRIS POWER SERVER User Manual Rev 1 0 Introduction Thank you for purchasing our innovative all in one solution Powerful Server appliance for your networking needs The AIRIS POWER SERVER integrates server services such as a Network Address Translator NAT Virtual Private Network VPN SPI firewall and networked storage into one easy to manage device The Powerful Server appliance allows a group of trusted computers and networks to connect quickly and safely With the Powerful Server appliance network managers and users can save time in establishing some of the most common services done on servers c
16. User Manual Rev 1 0 Example 2 DHCP Client Cable Modem External Metwork Interface ADSL PPPoE ADSL PPTP DHCP Client Fixed IP Address Fixed IP Address Setting Public IP 10 0 1 0 A External Gateway 10 j o o External Netmask 255 i o Applyg If you have a dynamic IP address from your ISP to access the Internet please select the DHCP Client radio button Once the external IP address is obtained via the DHCP protocol there is no need to give an external IP address external gateway address or netmask The DHCP server will dynamically assign these fields In general you should choose this option if you are connecting the Powerful Server appliance to a cable modem Note Cable modem users MUST disconnect the cable modem from the wall outlet for at least 2 minutes before turning it on again Some cable modem connections need you to provide specific hardware address For the case you should fill your hardware address that you get from your ISP provider in Hardware Address field to override the original hardware address However it does not update the original hardware address stored in EEPROM If you would not like to override the hardware address you should set each field of the Hardware Address to zero 00 19 AIRIS POWER SERVER User Manual Rev 1 0 Example 3 ADSL Connection External Network Interface ADSL PPPoE ADSL PPTP DHCP Client Fixed IP Address ADSL PPPoE Setting Pas
17. ackets from always sending on the same IP address and the other IP address to sit idle Multiple NAT solves this and allows you to increase the bandwidth Multiple NAT allows you to dispatch your network packets evenly to these IP addresses provided by ISP 1 Enter the Internal IP range1 e g 172 16 1 1 24 It means the network is 172 16 1 x 2 Enter the External IP range1 the IP address range you get from your ISP 27 AIRIS POWER SERVER User Manual Rev 1 0 3 5 6 Enter the Internal IP range2 e g 192 168 1 1 24 It means the network is 192 168 1 x Enter the External IP range2 the IP address range you get from your ISP Or enter 0 in each field for non setting multiple NAT Click the apply button After you configure the Multiple NAT on the group of fixed IP addresses it can increase the bandwidth The Internal IP range you entered will be routed to the corresponding External IP range Route Settings Route Settings Routing Setup Enable Disable Destination network Gateway Hop count 0 15 Ise 1 18 j e j0 p2 e Je je je pp e je jp je o e je Je JP jp e j je Je o e Je je je pp e je je je o e je Jp je pp e je je JP o The Route Settings page gives you a way to set the static route You have to set the static route if you would like to route your packets to the specific network and the router of the destination network does not support RIP Routing Informatio
18. ased management to configure theAIRIS Power Serverto suit your network environment In section 2 3 and 2 4 we will review all the software settings We will configure it to gain access to the Internet If you need additional help or advanced setting details please refer to the remaining chapters Hardware Installation Please follow the steps below to install hardware 1 Get the included Ethernet cable Connect one end of it to the ADSL Cable modem and the other end to the WAN port on the SA 2 Get another Ethernet cable Connect one end of it to the PC or hub and the other end to one of the LAN ports on the SA 3 Turn the ADSL Cable modem on Note Cable modem users MUST disconnect the cable modem from the wall outlet for at least 2 minutes before turning it on again If there are more PCs or hubs to be connected please repeat step a 4 Connect the included power adapter to the power socket on theAIRIS Power Serverand then plug the power adapter into a wall outlet 5 Turn on the SA If the link LED of the WAN port is not ON switch the WAN MDI MDIX switch to the alternate setting The hardware installation is now complete 11 AIRIS POWER SERVER User Manual Rev 1 0 Check Your PC First Please check the following settings on your PC Do not assign an IP address to your PC 1 Please select sequentially In Start menu gt Settings gt Control panel gt Network connections gt Local Area Connection Then a Loca
19. ay to initialize the hard disk RAID Initialization Wizard Self Monitoring Analysis and Reporting Technology 5 M A R T Setting SMART Enable Disable 2221 HD Power Management Setting Turn off hard disk Hard Diski s Availability Disk Number Model Name Size S M A E T Status HDD amp STATS A 290708 ME Pass Ready HDD E ST3300831 293034 ME Fass Ready Volume Status Type Available Size Total Size RAID Status RAID O Stripe 672979 MB bos 42 ME Active RAID Configuration RAID 0 stripe RAID 1 Mirror O S amp By enabling SMART the NAS will report when the hard drive is about to fail Your hard drive must support this feature The HD Power Management should be enabled to prolong the life of the hard drive When there is no activity for the set time period the hard drive will power down to conserve power save wear and tear and prevent the unit from building up unnecessary heat When a user wants to access the storage the NAS will automatically wake up 51 AIRIS POWER SERVER User Manual Rev 1 0 Select the type of RAID you want to apply above then click on the icon to begin the initialization process Microsoft Internet Explorer 2 re vou sure you want to initialize RAID 17 ALL DATA WIIL BE DESTROYED Click OK to the warning message to continue the process Enter the workgroup name description and initial share folder name The workgroup name should be the same one
20. can be modified Add j Removg Modify Enter a username and password Note Windows 98 SE Me users should user the same username as their Windows login Passwords are recommended but are not required Click Apply when completed AIRIS POWER SERVER User Manual Rev 1 0 Add Modify Users _ User Setting password App lg cance Highlight a user name and click on Remove or Modify to delete or change user information User Account Management User List Addy Groups After creating the users you can categorize the users into different groups to make assignment Group Management easier TT 2 Click on Add to create a new group Addy Remoyg Modify name AIRIS POWER SERVER User Manual Rev 1 0 Group Setting Enter the group name Groupname JJ O Group Members System Users Highlight the user s on admin the right side and click quest on the button to assign the user s to the group Highlight multiple users by holding down the Shift key or Ctrl key while ay o selecting users Select users on the left side and click on the gt button to remove them from the group When complete click the Apply button NAS Management Manage the main functions of the shared storage from this menu AIRIS POWER SERVER User Manual Rev 1 0 RAID Initialization Wizard The first time you use the NAS you may have to initialize the hard disk The wizard provides an easy w
21. dor Product ID Device Type Fort A Fort E Fort C Fort D External Network Interface IP Address 192 168 1 106 Hardware Address D0 28 0c 03 2f 00 Netmask 255 255 255 0 Max Transfer Unit MTU 1500 Tx Err Packets 340 0 Rx Err Packets 8266 0 Link Status Link Up 100 Mbps Full Duplex Internal Network Interface IP Address 172 16 1 1 Hardware Address J0 e 4c 3d ef dc Netmask 255 255 0 0 Max Transfer Unit MTU 1500 Tx Err Packets 96 0 Rx Err Packets 59 0 Link Status Port 1 Link Down Link Status Port 2 Link Down Link Status Port 3 Link Down Link Status Port 4 Link Down Retesh Figure 2 3b 15 AIRIS POWER SERVER User Manual Rev 1 0 Web Based Manager Basic Settings Start to configure your network environment by clicking the Basic Settings in left menu The Basic Settings page is shown as Figure 2 4a Basic Settings Internal Network Interface Server Appliance Name m45 Server Appliance IP Address LAN Netmask 25 RE Domain Name Server Domain Name Server 1 0 Optional Domain Name Server Jo Fom Optional Domain Name Server 3 UPnP Setting JOB AOA OC AOA oE UPnP Media Server Enable Disable External Network Interface ADSL PPPoE ADSL PPTP DHCP Client Fixed IP Address DHCP Client Setting Hardware Address 00 00 00 00 00 00 Figure 2 4a The Basic Settings page contains N
22. ds out so it does not hand out an IP in that range Typical offices set their DHCP server to assign IPs from 30 through 200 IPs 1 through 29 are usually assigned to servers and 201 and above are reserved for special uses You can either enable the DHCP server or disable it in this screen also m To Enable the DHCP Server If you do not have a DHCP server on your network 1 Select the Enable radio button already enabled by default 2 Enter a number in Lease time field 3 Enter the IP address range1 as 192 168 0 2 and 192 168 0 250 default Enter the IP address range2 otherwise enter O in each field Enter the IP address range3 otherwise enter O in each field Enter the IP address range4 otherwise enter O in each field 7 Click the apply button When DHCP server is enabled it will allow DHCP clients to obtain their network configuration from the unit In the figure above the IP address range of 192 168 0 2 to 192 168 0 250 is dynamically assigned to individual DHCP clients The DHCP client may be assigned an IP address like 192 168 0 10 The IP address 192 168 0 1 cannot be assigned as it is not in the range and is also assigned toAIRIS Power Serverunder Basic Settings If you assign another network e g 192 168 1 x to IP address ranges 2 3 4 please refer to section 4 2 for further IP Alias setting When no other IP address ranges are assigned a zero value should be filled in to indicate that n
23. e Total Size RAID Status RAID O Stripe 576836 ME 586067 ME Active Figure 3 8c In System Information page when Powerful Server cannot detect hard drive Status of Disk I as illustrated in Figure 3 8d or detect an error in S M A R T Status of Disk 2 also illustrated in Figure 3 8d you will see Not Active 54 AIRIS POWER SERVER User Manual Rev 1 0 shown in status field Hard Diskis Availability HDD A Not Actived HDD B QUANTUM FIREBALL 5T2 1 2062 ME Failed Not Actived Figure 3 8d AIRIS POWER SERVER User Manual Rev 1 0 When Powerful Server detect hard drive in Not Active mode RAID will not be activated Figure 3 86 Volume Status Type Available Size Total Size E AID Status Mo Available Figure 3 8e As long as there s a hard disk either in Not Active mode or in initialization process user would be able to execute RAID initialization You will see a screen similar to Figure 3 8f shown on your screen where the button would be disabled in grayish color RAID Configuration RAID O strip RAID 1 Mirror j a Gy F V Figure 3 8f AIRIS POWER SERVER User Manual Rev 1 0 USB HD Information Each of formatted partitions FAT32 EXT2 and EXT3 on the attached USB storage drive will be shown in the USB HD information page The naming rule for Mounting path is based on the connecting port For example if the USB hard drive was attached on port and here are thre
24. e formatted primary partitions on the disk theAIRIS Power Serverwill create USBHDA1 and USBHDA2 mounting path to represent each partition space USB HD Info USB Hardisk Information Fort Disk Partition No liFrimary A Frimary FortC Disk Partition No liFrimary Total Size ME 2048 1 17665 Total Size ME 19069 Capacity 35154 ME Available Size MB 18279 16265 Capacity 19077 ME Available Size ME 16547 Refresh USB CD DVD RW information This page display more detailed information for the connected USB CD DVD RW device The device type transfer soeed media type and media capacity will be shown in this page The USB CD DVD RW Information Mounting Fath USBHDAL USBHDA Mounting Fath USBHDC1 Refresh button let you Verdor TEAU Product ID amp Revision DV W24EW ROA can update the Device Type DVD R DVD RW Information immediately Support Burn Proof Yes and Eject button is used Max Read Speed 1 1060k B s Current Read Speed 1 1080K B s to unload the current Max Write Speed 5540k B s media open the tray Current Write Speed 540k B S Buffer Size 2193 KB Current Media Type DVD RW Disc Current Media Capacity 4 7 GB AIRIS POWER SERVER User Manual Rev 1 0 Erase CD DVD Before you erase CD DVD RW disc the current media information will be shown as the picture on the right side The most important thing is you can Verdor TEAC know how much da
25. e location a static IP and or a DNS name is required You can also setup a DDNS account if you are using a dynamic IP your DSL IP changes all the time See Dynamic Domain Name Server for additional information and help in setting up this service Your router must have this feature or you may have to run client software on a PC that is running on the network You must set your router to forward port 21 to 63 AIRIS POWER SERVER User Manual Rev 1 0 your NAS s fixed IP address Refer to the DDNS and port forwarding virtual server chapter of your router manual for details Enable the FTP server on the NAS You can change the default FTP port in the same configuration screen This is useful for making you FTP server less visible to users whom you do not want to grant access Some networks also block the standard port 21 and may require you to change to a different port Note If you change the default port 21 you will need to enter the port number every time you access the FTP server Make sure to have users and passwords assigned to all your shared folders If you want to allow anyone access just assign the guest account to that folder FTP users can then log on with and anonymous account to that folder Note Users will be able see the names of all the other shared folders but will not be able to access them without a username and password To completely disable anonymous access must have user account on NAS to see folders make sure
26. e mail account The mail server should allow e mails from the same network Event Report Settings Event Report Setting E mail address to send the alerts to Alarm Mail Enable Disable Administrator E mail fo Alert Level Normal Warning Appl Applyg Firmware Update Updates and functionality can be added via this function Please check the web for the latest firmware if you are having any issues In general no update should be needed unless it is recommended by technical support Note Do not do a firmware update over a wireless connection or power the unit down during a firmware update Any interruption during an update will damage your unit and require you to send it in for service Firmware Update Current firmware Firmware Version 1 45 version Firmware Update CEE Appl PP 4 select Browse and locate the updated firmware If the firmware file is not correct it will not update the firmware in the unit The version number will remain the same after the firmware update procedure AIRIS POWER SERVER User Manual Rev 1 0 The update percentage will Update Report update the status Update Percentage 39 Click Restart when the upload is complete Though it is not generally necessary Administrator Management New Password Contirm New Password a External Admin port 80 1 9000 Power down Yes No Restart device Yes No You should restore factory Clea
27. ect the time in the Turn Off hard disk field Figure 1 2 If you select none the hard disk will not enter the standby mode even if it is always idle If you select 5 mins the hard disk will enter standby mode once it is idle for more than five minutes RAID Initialization Wizard Self Monitoring Analysis and Reporting Technology S M A R 1 Setting SMART Enable Disable ABBY HD Power Management Setting Disk Number Size S M R T Status HDD A 293033 ME Pass Ready HDD B 293033 ME Pass Ready Volume Status Type Available Size Total Size RAID Status AIRIS POWER SERVER User Manual Rev 1 0 Figure 1 2 Physical Parts and Panel of the Powerful Server One WAN port 10 100 Mbps WAN port MDI MDIX switch Four LAN ports 10 100 Mbps Four USB 2 0 port Reset Button Power Button Power Jack DC 12V LEDs Link Activity LEDs for Each Ethernet Port Power LED HD Hard Disk Access LED HD Indicator amp Packet Transmit Receive LEDs AIRIS POWER SERVER User Manual Rev 1 0 WAN Port The WAN port is used to connect to an ADSL Cable modem for linking to the Internet WAN MDI MDIX Switch The WAN MDI MDIX switch is used to adjust the cable connection of the WAN port If the port is connected to hub you should move the switch to the hub side if the port is connected to PC like machine you should move the switch to the PC side As for the four LAN ports there is no need to add additional
28. er Web Server AIRIS POWER SERVER User Manual Rev 1 0 Network Settings When you select Network Settings in the left menu of the web page five configuration options appear DHCP Server IP Alias Multiple NAT Route Settings and DDNS Please refer to the corresponding section for these configurations Basic Settings Network Settings Firewall Settings VPN Settings System Management System Reports User Management DHCP Server DHCP Server DHCP Server DHCP Server Enable Disable Lease time po mi n IP address range 1 17 16 he 20 nr Et 5 5 b j p 1 0 IP address range 3 0 0 o o o b J P E IP address range 4 0 0 o o o oO J P J P In DHCP Server settings we assign the rage of the virtual IP addresses for the four LAN ports of SA All devices connect to the LAN ports ofAIRIS Power Serverwill be dynamically assigned the IP addresses within the range lf you wish to mix dynamic and static IP clients on your network Under DHCP server settings theAIRIS Power Serverdefaults to assigning IPs 172 16 1 2 through 172 16 1 250 50 depending on how many fixed IP devices they have they can assign their device to an IP of 172 16 1 251 through 254 as these IPs will not be handed out by the SA 24 AIRIS POWER SERVER User Manual Rev 1 0 If they have more devices or want a different IP range then all they need to do is modify the range that theAIRIS Power Serverhan
29. er Manual Rev 1 0 functionality any sub network can be grouped as though they are in the same network Firewall The Powerful Server appliance provides a powerful firewall capable of preventing hackers from attacking the gateway or internal network Many famous Dos attacks can be detected and prevented Whenever an attack is detected the system will alert the network manager that an attack has occurred The network manager can then inspect the log information to find the IP address that sent the packets Easy Installation In order to facilitate the use of the Powerful Server appliance the product comes with default settings that most network managers can install it without any modification If the network manager needs to modify any of the settings the Powerful Server appliance provides an intuitive Web based user interface RAID Redundant Array of Independent Disks RAID is a hard disk access technology that allocates space of disk drives that utilize two or more drives in combination so as to increase fault tolerance and improve overall performance Powerful Server appliance supports 2 types of RAID RAID 0 and RAID 1 m RAIDO Striped Disk Array without Fault Tolerance Provides data striping spreading out blocks of each file across multiple disk drives but no redundancy This improves performance but does not deliver fault tolerance If one drive fails then all data in the array is lost The size of this RAID type equal to sum o
30. etwork Policy Internal Network Interface Domain Name Server and External Network Interface We describe these settings below in detail You must click the apply button after you finish inputting the settings You will see a rebooting window as Figure 2 4b During the rebooting phase do not turn off or unplug the Powerful Server appliance 16 AIRIS POWER SERVER User Manual Rev 1 0 Amen he Server Now Figure 2 4b Internal Network Interface The default settings are m Host Name SA m Private IP 172 16 1 1 m Private IP Netmask 255 255 0 0 According to the default settings we will assign the LAN to network 172 16 1 x You can add more detailed configurations later in section 4 1 DHCP Server settings For the Network Address Translation NAT application the private network address should be set in the following address range reserved by the Internet Assigned Numbers Authority IANA Class Address Range AClass 10 0 0 0 10 255 255 255 172 16 0 0 172 31 255 255 C Class 192 168 0 0 192 168 255 255 Domain Name Server m Most of the time this information is not needed as your ISP will automatically provide the information m Please ask the DNS IP address from your ISP if one is required 17 AIRIS POWER SERVER User Manual Rev 1 0 External Network Interface External network interface includes ADSL PPPoE DHCP Client and Fixed IP Address settings Make sure that the system i
31. f Disk 1 and Disk 2 m RAID 1 Mirroring Disk Array A technique in which data is written to two duplicate disks simultaneously This way if one of the disk drives fails the system can instantly switch to the other disk without any loss of data The size of this RAID type equal to single Disk 5 AIRIS POWER SERVER User Manual Rev 1 0 Network Attached Storage Network attached storage NAS is the concept of shared storage on a network NAS transfers data using industry standard file sharing protocols such as CIFS AFP NFS and FTP Files can be shared simultaneously by clients regardless of the operating system they are using or the network server they are attached to This solution provides convenient common storage resources Dynamic DNS Dynamic DNS allows anyone wishing to reach your host by the name only Dynamic DNS will map that name to your current IP address which changes each time you dial your Internet service provider With a URL that stays the same all the time regardless of IP address your options become almost as unlimited as a normal content provider like www indiatimes com or www yahoo com USB Print Server USB Print Server allows any computer in the network to share an USB printer lt complies with USB 2 0 specifications And the users can print from any computer over a LAN Personal Web Server The Personal Web Server enables users to host an information type website from their appliance Create your website and p
32. he users that you want to allow VPN access Proceed to your appliance s PPTP Settings under VPN Settings 1 2 Enable the Server Enter a server IP a number from 2 254 that is not being used by any computer on the Appliance network Usually 200 is a safe number Enter a range of IP addresses that users logging into the Appliance will be assigned Usually 201 210 is ok Again make sure that there are no computers on the Appliance network using the IP addresses in this range Select Apply From the remote computer 1 From the start menu Select Settings gt Network and Dial up Connections gt Make a new connection Click Next on the wizard and select Connect to a private network through the internet Click on Next Select Do not dial Click Next Enter the host name This should be a static IP if you have one If not then set up a DDNS account before continuing This is where the Appliance can be found on the Internet Click Next Select if you want to create this connection for all users on your remote network or just for the one computer Click Next 70 AIRIS POWER SERVER User Manual Rev 1 0 6 Name your connection and select if you want to have an icon on your desktop Click Finish when done 7 Use the user name and password on your Appliance to log in You should be able to see the Appliance in your network neighborhood now You must initiate the VPN connection each time unless you selected otherwise
33. ite accessible without having to find out the current IP address Refer to the DDNS Chapter for more information Important Note The www share defaults to allow guest users to have access Please go into NAS Management gt File Sharing add a valid user and remove guest if you do not wish everyone to be able to modify you web pages E mail Server The E mail Server settings are located under Nas Management gt E mail Server Getting started In order to use the e mail server you must have domain name or have registered with a DDNS service provider E mail requires a domain name and will not work with just an IP address Enable the e mail server by selecting the Enable radio button Enter your domain name in Mail Domain Name For example myhomedomain com is a valid name Do not enter the www usually associated with domain names If you have a DDNS name for example myname dyndns org you can enter it here in as shown also You should limit the maximum size a mailbox under the quota field and the size of each e mail in the following field Default settings are O for unlimited E mail names After applying the settings your e mail accounts are now active They are based on your user names that are created under user management For example if teacher is a user on the appliance and school com is the 66 AIRIS POWER SERVER User Manual Rev 1 0 domain name the e mail address for teacher is
34. l Area Connection Status window shows up Figure 2 2a 2 Click the Properties button in Local Area Connection Status Then the Local Area Connection Properties window shows up Figure 2 2b 3 Select Internet protocol TCP IP item and then click the Properties button The Internet Protocol TCP IP Properties window shows up Figure 2 2c 4 Select the Obtain an IP address automatically radio button then click the OK button Local Area Connection Status General Support Connection Status Connected Duration 00 10 21 Speed 100 0 Mbps Activity Sent od Fecerved Packets 258 161 Figure 2 2a 12 AIRIS POWER SERVER User Manual Rev 1 0 Local Area Connection Properties General Authentication Advanced Connect using BS Intel H FROTO0 VE Network Connection Configure This connection uses the following items El Client for Microsoft Hetworks File and Printer Sharing for Microsoft Networks m QoS Packet Scheduler uf Internet Protocol TCP AF Install Uninstall Description Transmission Control PFrotocol Internet Protocol The default wide area network protocol that provides communication across diverse interconnected networks Show icon in notification area when connected Figure 2 2b Internet Protocol TCP IP Properties General Alternate Configuration You can get IP settings assigned automatically if pour network supports this capabi
35. lace it on the appliance for the world to see Use it in combination with our built in DDNS client and anyone with a broadband connection can have their very own website Personal POP E mail Server The Personal POP E mail Server provides users the ability to run a personal private e mail server Send e mail you re your registered domain name or just create a DDNS account and have your personalized e mail address FTP Server FTP is the most secure fastest reliable method of transferring files The FTP server allows you full control over who can login to the Powerful Server appliance which files the user can access or they could upload data Power Management We divide the power management function into three parts These are Power 6 AIRIS POWER SERVER User Manual Rev 1 0 Down and Hard Disk Standby We ll describe each part in detail below Power Down We turn the power down in several ways m Power Down by Web Please select System Management gt Administrator Settings In Power Down field to select the enable radio button and then click the apply button m Power Down by press the power button mE Prompt Power Down Please press and hold the power button at least 4 seconds Hard Disk Standby If the hard disk is idle for a while we would like the hard disk to enter standby mode to reduce the consumption of power In the left menu select NAS Management gt RAID Initialization Wizard in HD Power Management Setting please sel
36. les of your website into that directory via the network neighborhood mapped drive or FTP if you have enabled that function Make sure that you have allowed the user uploading the files to have read write access under File Sharing By default anyone anonymous can have access to the www shared folder as the guest account Is assigned to that share Web page design You must have an index html file as that is what the web server will look for as the first page of your website You are free to make folders under the www directory to help organize your website All references to those directories can be called on from any page You can use many popular web page design programs to make your website and then copy the finished product all associated images files and folders also to the www shared folder Accessing the website Users with a static WAN IP address can access the website simply by typing in the IP address on any browser If you are on the inside of the network you 65 AIRIS POWER SERVER User Manual Rev 1 0 must use the WAN IP address to access the website not the internal appliance IP address If you have a domain name then you can have the domain name company forward the domain to this static IP address With a domain name you do not have to remember the IP address just the domain name If you have a dynamic IP you can setup a DDNS account and enable the DDNS feature of your appliance to make your webs
37. like to change to Note that you must fill the new password in both Password change and Password confirmation fields If both fields are not the same the page will not be submitted 2 FTP Server please select the enable radio button to establish the FTP server Or select the disable radio button for none 3 Confirm New Password please enter the new password again 4 External Admin This feature allows administrators to access the web based configuration menu from the Internet The default setting for this feature is disabled for security reasons 5 External Admin Port defines a port for the remote administrator to connect to 6 Restart device This function reboots the Powerful Server appliance Select the enable radio button to restart SA The default setting of the function is disabled 7 Clear event log This function is used to clean the system history that is listed in Event Report section 8 2 If you choose the No radio button the event record never clears even when you reboot the system 8 Clear DHCP lease This function is used to clean the DHCP Lease record listed in section 8 4 Please choose the Yes radio button to clean DHCP lease report 9 Restore Factory default To recover the factory settings please choose the Yes radio button and the factory defaults will be loaded 10 Click the apply button 38 AIRIS POWER SERVER User Manual Rev 1 0 Event Report Settings Send alerts to an
38. lity Otherwise you need to ask your network administrator for the appropriate IP settings 4 Obtain an IP address automatically O Use the following IF address O Use the following DNS server addresses Figure 2 2c 13 User Manual Rev 1 0 AIRIS POWER SERVER Connect to the Web Based Manager Please follow the steps to connect to the web based manager 1 2 3 Open a browser on the PC that is DIRECTLY connected to the SA Type http 172 16 1 1 in address field And then press Enter key Server Appliance Microsoft Internet Explorer File Edit View Favorites Tools Help Address http 172 16 1 1 An authentication window shows up to prompt you to type the username and the password Leave the username blank and type admin as a password Figure 2 3a Connect to 172 16 1 1 User name Remember my password Cancel Figure 2 3a 4 Then press OK button The default web page will appear like Figure 2 3b 14 AIRIS POWER SERVER User Manual Rev 1 0 System Information System Report Firmware Version 2 02 System Up Time 0 hour 36 min 47 sec Hard disk Status Disk Number Model Name Size S M AE T Status HDD A ST3300831 293033 ME Pass Ready HDD B ST3300831 A 293033 ME Pass Ready Volume Status Type Available Size Total Size RAID Status RAID 1 Mirror 266401 ME 293033 ME Active Resyncing USB Device Information Position Ven
39. lowed to This access is the same whether they are accessing the share from the local network or through the Internet via ETP Click on Add to create a new shared folder Enter a share folder name LE Setting Share Name Selection Users C Groups Allowing User List Denying User List guest gt admin ss Permission Read wWrite v Assign users by highlighting the user selecting the file permission and clicking on the or gt button Click on Apply when complete Highlight the share folder and click on Remove or Modify to delete or edit the shared folder properties Shared Folders Management Shared Folders Addy Removg Modity AIRIS POWER SERVER User Manual Rev 1 0 For USB Storage Sharing As mentioned above each partition of the attached USB storage will be presented to one shared folder So if one USB storage device be plugged into port and it have 2 partitions The system create the USBHDA1 and USBHDA2 automatically and assigned the guest have read write permission by default File Sharing Shared Folders Management Shared Folders USBHDAL USBHDA USBHDCI Add j Removg Modify FTP Server If you want to access files stored on your NAS from a remote location the included FTP server is the easiest way Here is a typical setup Connection Diagram Work PC lt gt Internet lt gt DSL Modem lt gt Router lt gt NAS To access files from the NAS from a remot
40. n Protocol If the router supports RIP it will automatically exchange routing information withAIRIS Power Serverand it is not necessary to set a static route Please refer the steps and figures to set a static route Select Enable radio button in Routing Setup Enter the network in Destination network column e g 192 168 6 0 24 Enter IP address of the gateway in Gateway column e g 28 AIRIS POWER SERVER User Manual Rev 1 0 172 16 1 249 4 Enter the number in Hop count column The number means how many gateways you have to pass through 5 Click the apply button In the figures the destination network is 192 168 6 x And the packets will be route in or out of the destination network through the gateway 172 16 1 249 DDNS Dynamic DNS DDNS Client Setup DONS Client Service Enable Disable Service Provider dhs User name Fouracoount Password Host name yourhost Appl priy Your Internet Service Provider ISP provides you at least one IP address to use when connecting to the Internet The address you as assigned may be static meaning it never changes or more than likely dynamic meaning it s likely to change periodically How often it changes depends on your ISP A dynamic IP address complicates remote access since you may not know your current WAN IP address when you want to access your network over the Internet DDNS provides a simple and in most cases free solution The Internet
41. nformation webpage shows that your Link status is Link Up If not please check your connection and or switch the MDX switch located next to your WAN port We have to choose one of the three ways to configure the external network interface They are illustrated as follows Example 1 If you are connecting through a fixed IP address from the ISP Example 2 If you are connecting through a dynamic IP address from ISP Example 3 If you usually enter a username and password to access the Internet Example 1 Fixed IP Address Settings Basic Settings Internal Network Interface Server Appliance Name jas Server Appliance IP Address 172 LAN Netmask o o Domain Name Server Domain Name Server 1 o o 0 o Optional Domain Name Server 2 lo o o 0 Optional Domain Name Server 3 o o o o UPnP Setting UPnP Media Server Enable Disable External Network Interface C ADSL PPPoE ADSL PPTP DHCP Client Fixed IP Address Fixed IP Address Setting Public IP 10 1 0 1 0 External Gateway 10 o 0 External Netmask 255 o Appl PP Yy If you have a fixed IP address from your ISP to access the Internet please follow the steps below 1 Select the Fixed IP Address radio button Enter the Public IP address Enter the External Gateway Enter the External Netmask Click the apply button dl P 18 AIRIS POWER SERVER
42. o other IP addresses are available for assignment m To Disable the DHCP Server If you already have a DHCP server on your network 1 Select Disable radio button 2 Click the apply button m Or you do not have DHCP server on your network but you would like to assign a static IP address to each device 25 oS AIRIS POWER SERVER User Manual Rev 1 0 connected to the LAN port of SA 1 Select Disable radio button 2 Assign a static IP address to each device connected to the LAN port For example you have four PCs PCT PC2 PC3 and PC4 connected to the LAN port You have to assign a UNIQUE static IP address i e 192 168 0 34 192 168 0 25 192 168 0 18 192 168 0 108 to PC1 PC2 PC3 and PC4 respectively Note The static IP addresses assigned are all in the same subnet with SA In Basic Settings we set 192 168 0 1 as private IP address ofAIRIS Power Serverwith a 255 255 255 0 subnet Therefore the networked PCs need to belong to 192 168 0 x IP Alias In Basic Settings we ve set the private IP address ofAIRIS Power Serveras 192 168 0 1 We will assign the LAN ports ofAIRIS Power Serverto the network of 192 168 0 x In DHCP server settings we ve set the IP addresses of the LAN as 192 168 0 x 192 168 0 x includes 192 168 0 x and therefore is considered to be in the same network There is no problem if the network interface contains only one IP address range but if you want
43. om the Internet we establish some 31 AIRIS POWER SERVER User Manual Rev 1 0 forwarding rules to deal with the packet from the Internet users and direct theAIRIS Power Serverto forward the specific packets to the specific IP address Users from the Internet could be allowed to access the specific server on your LAN You can configure different IPs to act as different virtual servers For example the users accessing port 21 will be directed to 172 16 2 1 172 16 2 1 could be a FTP server Users accessing port 80 will be directed to 172 16 2 2 an HTTP server on the LAN For users outside the LAN they will feel like many services are running on a single host Please follow the steps below 1 Select Enable radio button in Virtual Server 2 Enter the IP address in LAN will be set as a virtual server 3 Select the Protocol 4 Enter the number in Ports the users accessing the port will be directed to the virtual server in step 2 5 Please repeat the steps above to establish more virtual servers or enter 0 in each field for none 6 Click the apply button URL Filter Setup URL Filter URL Filter Enable Disable iel so COSS o o Ses Se TT se 0 Se se 0 so TG seg ITF Appl PP ty The URL Filter function is used to restrict internal hosts from accessing specific URL locations You deny any access to the URL location specified in the Site1 Site2 Site10 fields Please follow the steps
44. osting thousands of dollars Product Specifications Connection Sharing m Flexible Address Space for NAT service m P Alias m Multiple NAT Virtual Private Network m PPTP Server Client Firewall m Prevent Denial of Service DoS Attacks m Packet URL Filtering H Access Control Virtual Server System Management m Web based Management for Configuring System Firmware Update via HTTP Reset To Factory Settings Event Alert and Logs System Information 3 AIRIS POWER SERVER User Manual Rev 1 0 Services m DHCP Client Server m Proxy DNS ms RIP m DDNS Client m FTP Server Network E Programmable Static Route m Network Protocols Supported PPPoE TCP UDP ICMP ARP PPP Authentication m PAP CHAP MS CHAPv2 Real Time Clock RAID Support m Supports RAID 0 1 File Sharing m Supports CIFS SMB Apple falk AFP NFS User Management m Local User Account Management Power Management m Support Mechanical Off Soft Off Sleeping Working System States Other Features m Personal Web Server m USB Printer Server m USB Storage Sharing m Personal POP E Mail Server Benefits and Key Features Virtual Private Network With Virtual Private Networking an enterprise can establish a dedicated tunnel among branch offices and or mobile employees All data is encrypted and decrypted via the pre defined dedicated tunnel This prevents any hackers from stealing private information in the public network With this 4 AIRIS POWER SERVER Us
45. p Computer Description HomeNas Apply Enable Apple file sharing for compatibility with older Macs Apple File Sharing Setup Apple File Sharing Enable Disable Enable the FTP server to allow remote and local FTP file access Change the default FTP port 21 for added security or compatibility Note If you change the default port users must manually enter the new port number when trying to access the FTP server See FTP Server chapter AIRIS POWER SERVER User Manual Rev 1 0 G FTP Setting FTP Server Enable Disable ABP FTP Port Linux users need to create NFS Mappings in order to connect to the NAS Enable the Network File System and click on Add to create the mapping NES Setting Network File System Enable Disable Apply NFS Mappings List Remote UID Remote IF Netmask Mapping User Action aay Enter the Remote UID IP netmask and the local mapping user NES Mapping Remote UID fo Remote IP 192_ e8 0 po 1 Mapping User admin Once complete mount the share on the Linux machine A typical mount command line mount lt IP address gt lt share folder gt lt local directory gt 61 AIRIS POWER SERVER User Manual Rev 1 0 File Sharing For file sharing you must create users and groups first Use this to organize the data on the NAS You can create private and public folders By managing which users have access to the shares users can only access information that they are al
46. r event log Yes No default to make sure that new Restore factory default Yes No features and settings are implemented Note You must re initialize the hard drive if you do this AIRIS POWER SERVER User Manual Rev 1 0 Time Settings The NAS s built in clock should be adjusted to the current local time This will insure accurate time reporting in the logs and file records Select your GMT time zone and then enter the date and time Click on Apply to make the changes Time Zone Setting GMT 8 00 v vyammiDD 2004 5 3 HH MM SS Apply DEP Date Time Pronerties 2 x Date amp Time Time Zone GMT 08 00 Pacific Time US amp Canada Tijuana See 10 37 am You can find your GMT time zone by double clicking on the clock M Automatically adjust clock for daylight saving changes located on the bottom right corner Cancel am of your desktop 41 AIRIS POWER SERVER User Manual Rev 1 0 SNMP SNMP SNMP Setup SNMP Agent Enable Disable Community Name s30 System Contact 523008 mall your net System Location ian o O Applyg The SNMP agent allows users with SNMP client applications to conveniently inspect the network status of SA Please follow the steps below to setup the SNMP agent 1 Select the Enable radio button in the SNMP Agent field 2 Enter the Community Name Note that the agent side and the client side must use the same community name
47. re are 2 error packets Link Status Shows the current transfer speed e g 100Mbps full duplex The refresh button Click the refresh button to see if anything has been updated If your external connection is not set to a fixed IP address you can check whether the Powerful Server appliance has obtained an IP address after booting If there is no external IP address you should check your network connection or environment settings 45 AIRIS POWER SERVER Total Records 18 Current Page System Log Date Level Use the information 14 34 47 04 15 2004 Normal provided here to 14 26 08 04 15 2004 Normal 14 20 41 0415 2004 Hermal help diagnose any 09 10 12 04 15 2004 Normal network related 09 09 09 04 15 2004 Normal issues 11 27 40 04 13 2004 Normal 18 58 11 04 05 2004 Hermal 11 14 51 03 26 2004 Hormal Navigate through the history with DO po these buttons You can clear the event logs under the Administrator settings page URL Log URL Log Total Loss il Current Page Lil Client IF Destination UEL 172 16 1 2 biip 1 16 1 1 dy 45 gt y User Manual Rev 1 0 ala Message System startup System startup System startup System startup System startup System startup System startup System startup System startup Ply The URL Log function records the recent connections for each client If you would like to view what the user is browsing you can click the corresponding Destination URL in the rightmost column AIR
48. s the most popular protocol PPTP PPTP Point to Point Tunneling Protocol described in RFC 2637 is a PPP specific protocol proposed by Microsoft TheAIRIS Power Serverimplements a PPTP server The remote user can connect to the PPTP server and access a local host behind the PPTP server When you select the VPN item in left menu of the web page PPIP configuration options will appear Please refer to the corresponding section for these configurations PPTP Settings For most companies the PPTP server creates a secure connection that a remote user can access a host within the company The remote user has to run a PPTP client and connect to the PPTP server The PPTP server has to validate the remote user as being in the User List in section 9 1 The server certifies the PPTP client with a username and password After passing the certification the server will assign a private IP address to the client The remote user will be treated like a member of the LAN and can access the local hosts inside the company Please refer to Appendix A for more details about configuring a PPTP VPN connection To run the PPTP server on the company side please follow the steps below 1 In PPTP Settings page Select the Enable button in PPTP Server field Figure 6 1 2 Enter the private IP address of the server in Server IP Address field 3 Enter the Client IP Range The server will assign the IP to each client within the range 4 Click the apply button 35
49. sproximate round trip times in milli seconds Minimum ms Maximum ms Average ms 71 AIRIS POWER SERVER User Manual Rev 1 0 Searching the Network for the NAS If you are not able to locate the NAS in the Network Neighborhood or My Network Places you can try to search for it f My Network Places E Oj x File Edit Wiew Favorites Tools Help Gack sea D Folders 4 ml Address My Network Places Links il Click Search under My Network Places Search for Computers Computer Hame nay Stop Search Search for other items Enter the name of the NAS or the Fixed IP address if configured that way and click Computers Search Now Files or Folders Near Me F objectis F All other company and or products names are trademarks and or registered trademarks of their respective owners AIRIS Www alris es
50. sword eeeeeces MTU Size 1492 j lt 1492 Connect On Demand Enable Disable Disconnect when network idled min PPPoE Management Status Connected Connection Time 00 00 33 my md g Most ADSL connections do not give you a fixed IP address In this case you must enter the user name and password provided by your ISP for authentication Please follow the steps below 1 Please select the ADSL PPPoE radio button 2 In ADSL PPPoE Setting Enter the User Name and Password 3 Click the apply button to save your settings After completing your configuration each time theAIRIS Power Serverboots it will try to connect with your ISP and the ISP will assign the Powerful Server appliance an external IP address Once successfully connected the Status field should reflect this If the Status is still the same check to make sure that the username password cables etc are all correct AIRIS POWER SERVER User Manual Rev 1 0 Example 4 ADSL PPTP Client Setting External Network Interface C ADSL PPPoE ADSL PPTP DHCP Client Fixed IP Address ADSL PPTP Setting UserName im S O Password COLLE My IP Address 210 123 887 9 Server IP Address 211 Apply If your ISP provides a PPTP server you could set up the PPTP client here Please follow the steps Select ADSL PPTP radio button Enter the user name You get this from your ISP Enter the password You get this from your ISP Enter
51. ta have Product ID amp Revision DV W24EW RJA Device Type DVD R DVD RW been stored in this disc Current Media Type DVD RW Disc When you press the Apply Data Size on Disc 109 MB button on the Current apply Media Information page the warning dialog will be pop up it will remind you all data will be destroyed after erasing the disc Current Media Information Microsoft Internet Explorer 2 Are vou sure vou want to erase the CD DVD ALL DATA WIL BE DESTROYED Burning Wizard The convenient burning tool be provided here you don t need to backup your USB data into CD DVD RW disc through the windows application just follow the instructions of the burning wizard you can easy to backup your important files into connected USB CD DVD RW The Device Information will be shown first Before burning you can check all information here CD DVD RW Burning Wizard Device Information Verdor TEAC Product ID amp Revision DV W24EW R A Device Type DVD R DVD RW Support Burn Proof es Current Media Type DVD RW Disc Current Media Capacity 4 7 GB Next 58 AIRIS POWER SERVER User Manual Rev 1 0 Next you can select files to backup from the connected USB HD in the Step1 page All available USB storage be shown in the USB HD List Highlight the file s on the right side and click on the lt button to select the burning file Select the files on the left side and click the gt button
52. ter one two etc 23 AIRIS POWER SERVER User Manual Rev 1 0 5 Enter the range of port numbers if any in Blocked Port Range In the example if any hosts that requests information from 192 168 1 1 to 192 168 1 254 in the intranet with port number 21 23 or from 100 to 1024 with TCP protocol will be blocked Denial of Service Denial of Service DoS Protection Enable Disable I Detect SYN Flood Attack Maximum TCP flow packets sec IF Detect ICMP Flood Attack Maximum ICMP flow packets sec IV Detect UDP Flood Attack Maximum UDP flow packets sec I Deny ICMP Echo Request ping on the WAN port IV Detect Ping of Death Attack IV Detect Tear Drop Attack Detect IP Spoofing Attack IF Detect Port Scan Attack App It is highly recommended that the DoS Protection feature be enabled to prevent attacks on the network However if you allow someone to manage the router from outside or are running a web server e mail server or FTP server you should either disable Detect SYN Flood Attack or increase the TCP flow Otherwise the configuration web pages will not be sent smoothly AIRIS POWER SERVER User Manual Rev 1 0 VPN Settings VPNs Virtual Private Networking provide secure communication between two separate networks without using a dedicated leased line In order to achieve this functionality a secure tunnel must be built between the two sites for secure communication over the Internet TheAIRIS Power Serversupport
53. th the built in USB printer server Note Some or all functions of multi function printers may not work depending on the driver support by the respective printer manufacturers Please make sure the hard disk has been initialized The RAID status is Active AIRIS POWER SERVER User Manual Rev 1 0 Volume Status Type Available Size Total Lee E Ager eats RAID O Stripe 576836 ME 586067 ME Connect a USB Printer to the USB port on the back of the NAS Windows Neighborhood Locate the NAS device in My Network Places and select it by double clicking on the icon do Computers Near Me JB x File Edit View Favorites Tools Help Back search L Folders es LG CL x ch Address Acc Enter a valid user name and password when prompted You will now see the printer port next to the shares for the device Double click on the PortA printer icon and follow the instructions to install the printer driver at the local station You may need to select Have Disk and insert 2 object s your printer s driver CD during the installation process CI Nas i OI x Address 1Mas Once the driver installation is completed you should be able to select the printer from the printer list in any Windows application You can manage the printer the same way as any other networked printer under Windows Standard TCP IP Port for Windows 2K XP LPR amp Raw mode AIRIS POWER SERVER User Manual Rev 1
54. to remove file from burning Files list When complete press the next to enter next step CD DVD RW Burning Wizard Step1 CD DVD RW Information DV W24EW RUA USB HD List Burning Files Hardisk Files Browser 12 150 Handset Manager zin setupdl eze SHARP GSM GFPR amp WI tast filetzt hardware pm spodl System Volume Informati test Next y Canca Before starting to write the selected files to the disc the wizard will show the total amount of your selected files and available capacity on the disc now If everything is ok press the next button to start burning Buring Wizard CD DVD RW Burning Wizard Step2 User data to be writen 109 ME Available capacity on disc 4512 MB Warning Message Next 59 AIRIS POWER SERVER User Manual Rev 1 0 Please wait the progress bar up to 100 and disc will be ejected automatically when the burning complete Burn CD DVD Report BURN CD DVD Writing data to Disc 244 Advanced Settings All the file protocols settings are located here Disable any protocols not in use by the computers on the network to increase performance Most users will not need to change any of the settings Make sure to click on Apply after making any changes Change the workgroup or NAS description Workgroup name should be the same for all computers sharing files MS Windows File Sharing Setup MS Windows File Sharing Enable Disable Workgroup Name vorkgrou
55. us Link Up LOO Mbps Full Duplex Internal Network Interface IP Address 172 16 1 1 Hardware Address lie dc 35d efide Netmask 255 255 0 0 Max Transfer Unit MTU 1500 Tx Err Packets 96 0 Rx Err Packets 2590 Link Status Port 1 Link Down Link Status Port 2 Link Down Link Status Port 3 Link Down Link Status Port 4 Link Down Refresh 44 AIRIS POWER SERVER User Manual Rev 1 0 The System Information displays some useful information about the system It shows the firmware version the system up time and the internal and external network connections On SA We have one WAN port and four LAN ports The WAN port belongs to the external network interface and the LAN port belongs to the internal network interface They are described as below Firmware Version 2 00 The system up time IP Address the IP address is shown as your current setting In Chapter 2 section 2 4 the Basic setting we already configure the external interface in one of the three ways ADSL PPPoE DHCP client and Fixed IP address In Chapter4 section 4 1 DHCP Server we assigned the IP address range to the internal network interface Hardware Address Ethernet hardware address Netmask corresponding to the network Max Transfer Unit maximum bytes of a packet Tx Err Packets e g 309 0 means you sent 309 packets and there are 0 packets with errors Rx Err Packets e g 3573 2 it means you received 3573 packets and the
56. you do not have the guest account assigned to any shared folder Now from the remote location type into a browser or FTP application ftp lt DDNS Name gt and it will take you to your NAS unit If you cannot see anything on your browser make sure you have the View FTP Folders option turned on in your browser settings You may also have to go into File gt Login As Use a valid user name and password for the NAS AIRIS POWER SERVER User Manual Rev 1 0 Personal Web Server The Web Server settings are currently under Nas Management gt Web Server Getting started Enable the web server by selecting the Enable radio button It will then create a shared folder called www Set the server port number to 80 if you want all default HTTP calls to go to your website When you type in a URL address in a browser the Internet automatically directs your browser to port 80 at that address This is the industry standard and should be used 99 of the time If you want to hide or make your site available only to people who know your port number then you can assign it a different port For example if you were to assign port 77 instead of 80 users would have to type in their browser www mywebsite com 77 to see the website You do not normally use 80 because that s the assumed default in the industry Uploading your web page s All web pages for your website will be stored in the www shared folder You can copy the folders and fi

Download Pdf Manuals

image

Related Search

Related Contents

instruction manual  CASE Kit User Manual    AquaFlex 4-20m Manual  Dermalogica Manuel de formation  Samsung GALAXY Pro User Manual  Cómo se instala y se pone en marcha el teléfono  取扱説明書  La Perdrix rouge : que faire pour son avenir dans les  Manual do Utilizador do Nokia 7250i  

Copyright © All rights reserved.
Failed to retrieve file