User Manual - Sütron electronic GmbH
Contents
1. 28 3 1 Customize Main Menu Menu Items 28 3 2 Hide Menu 30 SUTRON Cockpit Overall Table of Contents 3 9 XML 32 3 4 Custom 34 Important Notes 1 Important Notes 1 1 Symbols The symbols in this manual are used to draw your attention on notes and dangers This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible in jury or death DANGER This indicates a hazardous situation which if not avoided will result in death or serious injury WARNING This indicates a hazardous situation which if not avoided could result in death or serious injury CAUTION This indicates a hazardous situation which if not avoided could result in minor or moderate injury NOTICE This symbol together with the signal word NOTE and the accompanying text alert the reader to a situation which may cause damage or malfunction to the device hardware soft2. gt Registry Restore Default Registry Save Registry gt Fonts p gt Install Fonts Fonts Directory Administration mp Cockpit invisible Start Batch File gt Apply Admin ini a Network gt IP Address gt WINS DNS Device Name p gt SNTP _ 71 Password 57 2 Image 4 gt Backup Device gt Restore Backup gt Wallpaper gt System Monitor gt Flash Info Operating State gt SDCard gt Brightness gt Orientation y Calibrate Touch La File Manager 15 SUTRON Cockpit Variants 2 2 2 Settings and Functions Some settings are password protected The default password is 2 2 2 1 Language Selection 3 You can customize the language of the cockpit interface at the language menu item 1 Select the desired language 7 2 Confirm your selection with the green check 2 2 2 2 FTP You can configure FTP access to the operating device via the FTP menu FIP Current Users
3. User Manual Cockpit Part Number Version Date Valid for 80860 774 3 2014 09 30 Cockpit SUTRON Cockpit Version Date Modifications 1 2011 01 05 First edition 2 2011 08 01 New functions Fonts backup backlight touch calibration 3 2014 09 30 Cockpit descriptions dependent on the operating system This manual including all illustrations contained herein is copyright protected Use of this manual by any third party in departure from the copyright provision is forbidden No part of this manual may be reproduced trans lated or electronically or photographically archived or altered without the express written consent from S tron electronic GmbH Violations shall be cause for damage liability Sutron electronic reserves the right to make any changes that contribute to technical improvement SUTRON Cockpit Overall Table of Contents 1 NOO aa me a a nn 5 1 1 5 Te oA i em 5 1 3 mended USO oeenn A T be pe 6 Tta Target GOUD ere Edna lee 6 2 lt mmm 7 2 1 Windows 29 ER LE RER ecran 8 2 1 1 Menu STUCUTE RERO ne 8 2 1 2 Settings and Functions 9 2 1 2 1 Language Selection 9 2 1 2 2
4. p gt Bootloader p Backup gt Backup Device gt Restore Backup gt gt A Display Brightness Orientation Calibrate Touch dig File Manager Cockpit Variants 2 1 2 Settings and Functions 1 Some settings password protected The default password is 2 1 2 1 Language Selection 3 You can customize the language of the cockpit interface at the language menu item 1 Select the desired language 2 Confirm your selection with the green check 2 1 2 2 FTP You can configure FTP access to the operating device via the FTP menu FIP Current Users The list box displays all existing FTP users Add User 1 Enter a user name and password for the new FTP user 2 Press the Add User button To change the password of an existing user follow these steps 1 Select the user name in the list box 2 Enter the new password 3 Press the Add User button to confirm the password Delete User 1 Select a user name in the Current Users list 2 Press the Delete User button to delete the selected user Allow anonymous This option allows FTP access with the user name and password Anonymous 1 Select the Allow anonymous option J 2 Confirm your selection with the green check 3 Restart the operating device for the changes to take effect 2 1 2 3 Date and Tim
5. Operating system Operating system version 2 1 2 5 Network You can configure the network settings with the Network menu item Use Dynamic IP DHCP The network configuration is automatically obtained from the DHCP server Confirm your selection with the green check Use Static IP Manually assign an ip address subnet mask and gateway of the operating de vice Confirm your selection with the green check Optionally enter the addresses for the WINS DNS server Confirm your selection with the green check The input fields are only active when you set up a static ip You can define a device name with a maximum of 15 characters Via network the device can be accessed with the device name instead of the ip address Confirm your selection with the green check Enter the address of an intranet or internet time server Define an interval in mil liseconds for time synchronization Confirm your selection with the green check 2 1 2 6 Password The menu item Password allows you to protect certain menu items in the cockpit with a password Current password 1 Enter a password for the protected menu items 2 Confirm your selection with the green check Password protected 1 Select the menu items which shall get a password protection 2 Confirm your selection with the green check Cockpit Variants 2 1 2 7 Update E You can update the image and the bootloader with the menu item Update The image includes th
6. The internal memory is provided in the FlashDrv folder A splash screen is shown at the startup of the operating device The components are provided in a zip file or can be updated individually FlashDrv contents can be updated only with a zip file The FlashDrv folder must be avail able in the zip file for that Start Update NOTICE On update with a zip file all data in the flash memory of the operating device are deleted if the zip file contains the folder FlashDrv Press the Open button 2 Navigate in the dialogue to the folder with the zip file or a splash screen graph ic in the bitmap format 3 Select the file 4 Press the OK button 5 Press the Start Update button 6 Press the OK button at the dialog to start the update NOTICE Do not interrupt the power supply during the process After canceling an pro cess the operating device may not be operational anymore The update is carried out automatically This procedure can take several minutes The successful update will be confirmed with a dialog 7 Restart the operating device Backup Device 1 Insert a USB stick into the female connector of the operating device 2 Press the button Backup Device The files are copied to the directory Backup on the USB stick A dialog lets you know if there is already a directory Backup with data on the USB stick If you confirm this dialog the existing backup is overwritten The
7. _ __ _ 9 2 1 2 3 BYS TEN NE NEU 9 2 1 2 4 Administration TN 10 2 1 2 5 NetWOTK cerere T 12 2 1 2 6 A 12 2 1 2 7 EE 13 2 1 2 8 IB 14 2 1 2 9 PIG MAR AGEN M 14 2 2 Windows Embedded 7 15 2 2 1 Menu POE 15 2 2 2 Settings and Functions 16 2 2 2 1 Language Selection 16 2 2 2 2 16 2 2 2 3 Date and _ _ _______ 16 2 2 2 4 Administration E RE 17 2 2 2 5 MINUM EM ML D PM EMI E 19 2 2 2 6 eo MERO 20 2 2 2 7 ES _ 20 2 2 2 8 SD 22 2 2 2 9 FE MANAGE 22 2 3 Windows Embedded Standard 7 24 2 3 1 LUE OR Enden 24 2 3 2 Settings and Functions 25 2 3 2 1 Language SSISCUON nn sean anus 25 2 3 2 2 Date and TI on a _ 25 2 3 2 3 Administration TEE u 25 2 3 2 4 asia 25 2 3 2 5 PSS 26 2 3 2 6 Br 26 2 3 2 7 MATRE Re 26 3 User defined Interface
8. The value 0 disables the function 1 Turn the orientation using the buttons Turn left and Turn right to the desired position 2 Confirm your selection with the green check Depending on device type the new orientation is accepted immediately or after a reboot of the operating device 3 Press the OK button 1 Press the Recalibrate button Depending on device type the calibration is automatically started immediately or after a reboot of the operating device 2 Press the displayed marks to calibrate the touch 2 1 2 9 File Manager Use the file manager to copy files and directories between the storage medias USB stick lt gt device memory You can also delete files and directories 1 Select one or multiple files folders 2 Press the lt lt button to copy the data to the USB stick gt gt to copy the data on the device memory 1 Select one or multiple file s folder s 2 Press the Delete button to delete the data from the USB stick or the device memory Cockpit Variants 2 2 Windows Embedded Compact 7 2 2 1 Menu Structure Start gt Normal L Cockpit Language Selection English p German El FTP Current Users gt Add User p Delete User Y ER Date and Time Administration gt Information
9. user xml with your favorite editor e g Notepad or open a already existing file Create this basic structure if not already present lt xml version 1 0 encoding UTF 8 2 gt Cockpit lt The Main Programm gt Main lt 1 gt lt List of Controls gt lt Controls gt rol 1562 control Ist lt Controls gt lt Cockpit gt 2 Expand the XML file within the control_list tag lt item gt lt name gt Display Settings lt name gt lt label gt lt label gt lt icon gt lt icon gt lt control gt lt control gt lt backgroundImage gt lt backgroundImage gt lt passwordProtected gt lt passwordProtected gt lt background gt lt background gt lt item gt 3 Open your FTP program or the Windows Explorer and enter the ip address of the operating device example 1 149 208 160 232 4 Copy the file user xml with the FTP program into the root directory of the op erating device User defined Interface Content 5 Start the cockpit 31 SUTRON User defined Interface Content Source code The complete source code of the example should now look like this lt xml version 1 0 encoding UTF 8 gt lt gt lt List of Controls gt lt Controls gt 61 LISTS lt item gt lt name gt Display Settings lt name gt lt label gt lt label gt lt icon gt lt icon gt lt control gt lt control gt lt backgr
10. Admin ini is detected Lock Off The button to start the cockpit is activated Mode Development The shell has full functionality The change becomes effective on the next device reboot Mode Standard The Shell is restricted No task bar and task switch available Desktop contains the cockpit icon only The change becomes effective on the next device reboot DeviceName MyName Defines the device name of the operating device DeviceName MyName Comment no impact Restore Default Registry Destroys the current registry and activates the default registry of the image Save Registry The registry is saved completely Install Fonts The fonts in the default directory or user specific directory will be installed auto matically when you start the operating device Depending on the number and size of fonts the system start up take correspond ingly more time Fonts Directory The fonts in this directory are used if the Install Fonts option is active If no di rectory is given the appropriate default directory is used Product line s Memory type Default directory S Line E Line Internal FlashDrv Fonts M Line P Line Memory card StorageCard Fonts 11 C SUTRON Cockpit Variants Information IP Address WINS DNS Device Name SNTP 12 Vv l Vv The following informations are displayed Device type Serial number Software bundle Image name Image date
11. IP Address L WINS DNS gt Device SNTP EDS Password E Display Brightness Orientation Calibrate Touch FBWF HORM m T 24 Information IP Address WINS DNS Device Name l Cockpit Variants 2 3 2 Settings and Functions Some settings are password protected The default password is 2 3 2 1 Language Selection You can customize the language of the cockpit interface at the language menu item 1 Select the desired language 2 Confirm your selection with the green check 2 3 2 2 Date and Time You set up date time and time zone via the Date and Time menu item 2 3 2 3 Administration The Administration menu shows device information The following informations are displayed Device type Hardware version Serial number Image name Image date Operating system 2 3 2 4 Network You can configure the network settings with the Network menu item Use Dynamic IP DHCP The network configuration is automatically obtained from the DHCP server Confirm your selection with the green check Use Static IP Manually assign an ip address subnet mask and gateway of the operating de vice Confirm your selection with the green check Optionally enter the addresses for the WINS DNS server Confirm your selection with the green check
12. successful backup will be confirmed with a dialog Wallpaper Cockpit Variants Restore Backup NOTICE When restoring the backup all data in the flash memory of the operating device will be deleted The process of backup and restore all settings is possible only with identical de vice types 1 Insert a USB stick into the female connector of the operating device 2 Press the Restore Backup button NOTICE Do not interrupt the power supply during the process After canceling an pro cess the operating device may not be operational anymore The backup files are copied from the directory Backup to the flash memory of the operating device The successful update will be confirmed with a dialog 3 Restart the operating device Browse You can set a custom background image as follows 1 Press the Open button 2 Navigate with the dialog box to the folder with the file in the BMP PNG JPG or GIF format 3 Select the file 4 Press the OK button You have 10 seconds to confirm the new background image If the time has passed without confirmation the selected image is not accepted 5 Confirm the dialog with the green check The new background image is applied immediately Clear You can delete the background image as follows 1 Press the Clear button You have 10 seconds to confirm the clear operation If the time has passed with out confirmation the selected image is not deleted 2 Confirm the di
13. Apply Admin ini 1 Edit the file Admin ini in the root directory of your USB stick with your favorite editor e g Notepad If the Admin ini does not exist create the file 2 Add the desired functions see table to the file or edit an existing entry the file Insert a USB stick into the female connector of the operating device Press the cockpit button during startup of the operating device Press the button Administration Press Administration to activate the area Press the Apply Admin ini button CSS CE The activated parameters are confirmed with a dialog 9 Confirm this and the following dialogs with the OK button to complete the ad ministration 10 Remove the USB stick and restart the operating device Observe upper lower case for all entries 10 Registry Fonts Cockpit Variants Possible contents for the Admin ini file Start explorer exe Starts the explorer Start MyProgram exe Starts the application MyProgram exe Initial directory is windows Use the following syntax to start an application on the usb stick Start HardDisk MyProgram exe Use multiple entries to start several applications Registry Default Destroys the current registry and activates the de fault registry of the image The change becomes ef fective on the next device reboot Lock On The button to start the cockpit is locked The button is only active when a USB stick with the file
14. Disable FBWF button 2 Confirm your selection with the green check 3 Restart the operating device for the changes to take effect Exclude Folders 1 Select the folders that should be not write protected 2 Press the Exclude Folders button 3 Confirm your selection with the green check 4 Restart the operating device for the changes to take effect The current state of the system can be saved and restored automatically at every startup The boot process is accelerated by this function Enable HORM To use HORM EWF must be active 1 Press the Enable HORM button 2 Press the Hibernate System button to save the current state Disable HORM 1 Press the Disable HORM button 2 Confirm your selection with the green check 3 Restart the operating device for the changes to take effect Hibernate System 1 Press the Hibernate System button The operating device is set to hibernation Thereby the current state of the system is saved and restored automatically at every startup 27 SUTRON User defined Interface Content 3 User defined Interface Content Example You can customize the user interface of the cockpit to your needs if necessary Among other things the following elements can be customized Background image Start image Navigation images Menu images Texts of the menu items 3 1 Customize Main Menu Menu Items In the following example the appearance of the main menu
15. The input fields are only active when you set up a static ip You can define a device name with a maximum of 15 characters Via network the device can be accessed with the device name instead of the ip address Confirm your selection with the green check 25 SUTRON Cockpit Variants SNTP Brightness Orientation Calibrate Touch EWF 26 pil i ie Enter the address of an intranet or internet time server Define an interval in mil liseconds for time synchronization Confirm your selection with the green check 2 3 2 9 Password The menu item Password allows you to protect certain menu items in the cockpit with a password Current password 1 Enter a password for the protected menu items 2 Confirm your selection with the green check Password protected 1 Select the menu items which shall get a password protection 2 Confirm your selection with the green check 2 3 2 6 Display This category offers the following functions Brightness and orientation of the display Calibration of the touch 1 Adjust the brightness using the slider or the arrow symbols 2 Confirm your selection with the green check 1 Turn the orientation using the buttons Turn left and Turn right to the desired position 2 Confirm your selection with the green check Depending on device type the new orientation is accepted immediately or after a reboot of the operating device 3 Press the OK button 1 Pre
16. The list box displays all existing FTP users Add User 1 Enter a user name and password for the new user 2 Press the Add User button To change the password of an existing user follow these steps 1 Select the user name in the list box 2 Enter the new password 3 Press the Add User button to confirm the password Delete User 1 Select a user name in the Current Users list 2 Press the Delete User button to delete the selected user Allow anonymous This option allows FTP access with the user name and password 1 Select the Allow anonymous option 2 Confirm your selection with the green check 3 Restart the operating device for the changes to take effect 2 2 2 3 Date and Time ED You set up date time and time zone via the Date and Time menu item 16 Cockpit Variants 2 2 2 4 Administration Va The Administration menu allows you to run the Project bat or Admin ini and backup and restore the registry In addition you see device information Administration Cockpit invisible The Cokpit is no longer displayed at startup after you enable this option To make the cockpit visible again proceed as follows 1 Create a file without content with the name Launch me on the root direc tory of a USB stick 2 nsert the USB stick into the female connector of the operating device va 3 Press the button to start the cockpit before the progress bar is down 4 Open the menu ite
17. alog with the green check The background image will be removed immediately 21 C SUTRON Cockpit Variants 2 2 2 8 Display You can carry out settings such as brightness and orientation of the display and the calibration of the touch via the Display menu item 1 Adjust the brightness using the slider or the arrow symbols 2 Confirm your selection with the green check Dim Backlight The brightness of the backlight is reduced after the defined time minutes The value 0 disables the function Switch Off Backlight The brightness of the backlight is switched off after the defined time minutes The value 0 disables the function 1 Adjust the brightness using the slider or the arrow symbols 2 Confirm your selection with the green check Brightness Steps The brightness of the backlight can be adjusted time controlled in 3 steps After the defined time minutes the brightness is reduced to the defined value The timeout value O disables the function Screensaver The backlight is switched off after the defined time minutes and a default graphic is displayed on the display at changing positions The standard graphic can be replaced by a customized graphic in the bitmap format Save the graphic in the folder FlashDrv Screensaver with the file name Screensaver bmp for this Brightness Brightness Orientation Calibrate Touch Copy file s folder s Delete file s
18. and the menu item display is customized The background images navigation buttons and the icon for the menu item display is replaced with custom images as well as text replaces of the display menu 28 Figure 3 1 Example Standard customized cockpit To create a custom cockpit as in the example do the following 1 Create a file with the name user xml with your favorite editor e g Note 2 Create this basic structure lt xml version 1 0 encoding UTF 8 2 gt lt Cockpit gt lt The Main Programm gt lt Main gt lt Main gt lt List of Controls gt lt Controls gt lt control List Control Iist lt Controls gt lt Cockpit gt Within the lt Main gt tags you can use special XML tags to customize the user in terface of the cockpit main window In the lt Controls gt tag you can customize the look of the controls and integrate your own controls 3 Expand the XML file within the Main tag with the desired options User defined Interface Content In this example some standard images and standard values are replaced by cus tomized lt backgroundImage gt FlashDrv background grey png lt backgroundImage gt lt button left gt FlashDrv nav left blue png lt button left gt lt button right gt FlashDrv nav right blue png lt button right gt button exit gt FlashDrv exit png lt button exit lt password gt 123456 lt password gt lt passwordIcon gt FlashDrv key
19. e ED You set up date time and time zone via the Date and Time menu item C SUTRON Cockpit Variants 2 1 2 4 Administration Va The Administration menu allows you to run the Project bat or dmin ini and backup and restore the registry In addition you see device information Administration Start Batch File 1 Open your FTP program or the Windows Explorer and enter the ip address of the operating device example ftp 149 208 160 232 2 Download an existing file project bat from the root directory on your local file system or create a new file with this name 3 Editthe file project bat with your favorite editor e g Notepad and add the following content FlashDrv MyFolder MyProgram exe parameter With the appropriate paths different memory areas of the operating device can be accessed Some paths are dependent on the product line of the operating device Product line s Memory type Path All USB stick HardDisk S Line E Line M Line Internal FlashDrv P Line E Line M Line P Line Memory card StorageCard 4 Savethe file 5 Copy file project bat with the FTP program or the Windows Explorer into the root directory of the operating device va 6 Restart the operating device and press the cockpit button during startup 7 Press the button Administration 8 Press Administration to activate the area 9 Press the Start Batch File button Your application will be started immediately
20. e Selection FTP Date and Time Administration Network Password Update 33 G SUTRON User defined Interface Content 3 4 Custom Controls The cockpit allows you to integrate your own controls These can be programmed in Microsoft Visual Studio similar template for Visual Studio 2008 is available Please contact us for further information 34 SUTRON
21. e operating device 8 Start the cockpit 29 SUTRON User defined Interface Content Source text Example 30 The complete source code of the example should now look like this lt xml version 1 0 encoding UTF 8 2 gt lt Cockpit gt The Main Programm gt Main lt backgroundImage gt FlashDrv background grey png lt backgroundIm age gt lt button left gt FlashDrv nav left blue png lt button left gt lt button right gt FlashDrv nav right blue png lt button right button exit gt FlashDrv exit png lt button exit gt lt pass word gt 123456 lt password gt lt passwordIcon gt FlashDrv key png lt passwordI con gt lt background gt true lt background gt lt Main gt lt List of Controls gt lt Controls gt SCONE rod ist lt item gt lt name gt Display Settings lt name gt lt label gt Brightness Orientation Helligkeit Ausrichtung lt label gt lt icon gt FlashDrv mon itor png lt icon gt lt control gt Windows DisplaySettings dll lt con trol gt lt backgroundImage gt FlashDrv background grey png lt backgroundImage gt lt passwordProtected gt true lt passwordProtect ed gt lt background gt false lt background gt lt item gt control list lt Controls gt lt Cockpit gt 3 2 Hide Menu Item In this example the menu item display will be hidden If you do not need one or more standard menu items you can hide it as follows 1 Create with the name
22. e operating system and product specific data The bootloader starts the operating system and product specific functions Image Start update Press the Open button Navigate with the dialog into the folder with the image file Select the image file Press the OK button Press the Start Update button Press the OK button at the dialog to start the update NOTICE Please do not interrupt the power supply during the process After canceling an process the operating device may not be operational anymore m DM Les The successful update will be confirmed with a dialog 7 Restart the operating device Bootloader Start update Press the Open button Navigate with the dialog into the folder with the bootloader file Select the bootloader file Press the OK button Press the Start Update button Press the OK button at the dialog to start the update NOTICE Do not interrupt the power supply during the process After canceling an pro cess the operating device may not be operational anymore 14 2 The successful update will confirmed with dialog 7 Restart the operating device Backup Backup Device 1 Insert a USB stick into the female connector of the operating device 2 Press the button Backup Device The files are copied to the directory Backup on the USB stick dialog lets you know if there is already a directory Backup with data on the USB stick If you confirm this dialog the existi
23. ed functions see table to the file or edit an existing entry 3 Save the file 4 nsert a USB stick into the female connector of the operating device va 5 Press the cockpit button during startup of the operating device 17 SUTRON Cockpit Variants 6 Press the button Administration 7 Press Administration to activate the area 8 Press the Apply Admin ini button The activated parameters are confirmed with a dialog 9 Confirm this and the following dialogs with the OK button to complete the ad ministration 10 Remove the USB stick and restart the operating device A Observe upper and lower case for all entries Possible contents for the Admin ini file Start explorer exe Starts the explorer Start MyProgram exe Starts the application MyProgram exe Initial directory is windows Use the following syntax to start an application on the usb stick Start HardDisk MyProgram exe Use multiple entries to start several applications Registry Default Destroys the current registry and activates the de fault registry of the image The change becomes ef fective on the next device reboot Lock On The button to start the cockpit is locked The button is only active when a USB stick with the file Admin ini is detected Lock Off The button to start the cockpit is activated Mode Development The shell has full functionality The change becomes effective on the next device reboot Mode Standard The Shell is rest
24. folder s 22 The timeout value O disables the function 1 Turn the orientation using the buttons Turn left and Turn right to the desired position 2 Confirm your selection with the green check Depending on device type the new orientation is accepted immediately or after a reboot of the operating device 3 Press the OK button 1 Press the Recalibrate button Depending on device type the calibration is automatically started immediately or after a reboot of the operating device 2 Press the displayed marks to calibrate the touch 2 2 2 9 File Manager Use the file manager to copy files and directories between the storage medias USB stick lt gt device memory You can also delete files and directories 1 Select one or multiple files folders 2 Press the lt lt button to copy the data to the USB stick or gt gt to copy the data on the device memory 1 Select one or multiple file s folder s Cockpit Variants 2 Press the Delete button to delete the data from the USB stick or the device memory 23 C SUTRON Cockpit Variants 2 3 Windows Embedded Standard 7 2 3 1 Menu Structure Start gt c 2 Cockpit 77 Language Selection 3 English German E Date and Time Administration p Information Network 1
25. m Administration 5 Disable the option Cockpit invisible J 6 Confirm your selection with the green check Start Batch File 1 Open your FTP program or the Windows Explorer and enter the ip address of the operating device example 1 149 208 160 232 2 Download an existing project bat from the root directory on your local file system or create a new file with this name 3 Edit the file project bat with your favorite editor e g Notepad and add the following content FlashDrv MyFolder MyProgram exe parameter With the appropriate paths different memory areas of the operating device can be accessed Some paths are dependent on the product line of the operating device Product line s Memory type Path All USB stick HardDisk S Line E Line M Line Internal FlashDrv P Line E Line M Line P Line Memory card StorageCard 4 Save the file 5 Copy the file project bat with the FTP program or the Windows Explorer into the root directory of the operating device va 6 Restart the operating device and press the cockpit button during startup 7 Press the button Administration 8 Press Administration to activate the area 9 Press the Start Batch File button Your application will be started immediately Apply Admin ini 1 Editthe file Admin ini in the root directory of your USB stick with your favorite editor e g Notepad If the Admin ini does not exist create the file 2 Add the desir
26. ng backup is overwritten The successful backup will be confirmed with a dialog Restore Backup NOTICE When restoring the backup all data in the flash memory of the operating device will be deleted The process of backup restore all settings is possible only with identical vice types 1 Insert a USB stick into the female connector of the operating device 13 SUTRON Cockpit Variants D Brightness Orientation Calibrate Touch Copy file s folder s Delete file s folder s 14 2 Press the Restore Backup button NOTICE Do not interrupt the power supply during the process After canceling an pro cess the operating device may not be operational anymore The backup files are copied from the directory Backup to the flash memory of the operating device The successful update will be confirmed with a dialog 3 Restart the operating device 2 1 2 8 Display You can carry out settings such as brightness and orientation of the display and the calibration of the touch via the Display menu item 1 Adjust the brightness using the slider or the arrow symbols 2 Confirm your selection with the green check Dim Backlight The brightness of the backlight is reduced after the defined time minutes The value 0 disables the function Switch Off Backlight The brightness of the backlight is switched off after the defined time minutes
27. oundImage gt lt backgroundIm age gt lt passwordProtected gt lt passwordProtected gt lt background gt lt back ground gt lt item gt lt feCoOnerod 215915 lt Controls gt lt Cockpit gt 3 3 XML Elements The following XML tags are possible within the Main tag Table 3 1 Main XML tags XML tag Function lt backgroundImage gt Background image for the cockpit window myPath myBackground png Background images can be defined as needed sep lt backgroundImage gt arately for each control You define the background Image tag within the control for this purpose lt button_left gt Image for left navigation button myLeftButton png lt button left button right Image for right navigation button myRightButton png button rrghte button exit Image for ending the cockpit myExiritButton png lt button exit button enter Image for starting the cockpit myEnterButton png lt button enter lt password gt Default password 12345 This value is used if the password has not been con lt password gt figured in the cockpit or the registry was restored lt passwordIcon gt Image for the password prompt dialog myPasswordIcon png passwordlcon background The desktop in the background of the cockpit can be true shown visible false or gray true If the value is lt background gt true a gray background appears 32 User defined Interface Content The foll
28. our selection with the green check Use Static IP Manually assign an ip address subnet mask and gateway of the operating de vice Confirm your selection with the green check Optionally enter the addresses for the WINS DNS server Confirm your selection with the green check The input fields are only active when you set up a static ip You can define a device name with a maximum of 15 characters Via network the device can be accessed with the device name instead of the ip address Confirm your selection with the green check Enter the address of an intranet or internet time server Define an interval in mil liseconds for time synchronization Confirm your selection with the green check 19 C SUTRON Cockpit Variants Image Backup 20 pil 2 2 2 6 Password The menu item Password allows you to protect certain menu items in the cockpit with a password Current password 1 Enter a password for the protected menu items 2 Confirm your selection with the green check Password protected 1 Select the menu items which shall get a password protection 2 Confirm your selection with the green check 2 2 2 7 Update With the menu option update you can update different components image boot loader configuration FlashDrv contents and splash screen The image includes the operating system and product specific data The bootloader starts the operating system and product specific functions
29. owing XML tags are possible within the control list tag Table 3 2 Controls XML tags name myControl lt name gt lt label gt My Control Name lt label gt lt icon gt myControlButton png 7 icon lt control gt myPath myControl dll lt control gt lt backgroundmage gt myPath myBackground png lt backgroundImage gt lt passwordProtected gt true lt passwordProtected gt lt passwordIcon gt myPasswordIcon png lt passwordIcon gt lt background gt false lt background gt Name of the Control See table 3 3 Names of the controls Display name of the control Image for control Path to DLL of the control The default controls are located in the windows di rectory Background image for control window The background image can also be defined overall the cockpit if necessary Define the backgroundlm age tag within the Main tag for this purpose Enable true or disable false password protection for control by default This value is used if the password protection has not been configured in the cockpit or the registry was re stored Image for the password prompt dialog The desktop in the background of the cockpit can be shown visible false or gray true at a control If the value is true a gray background appears Standard controls can be configured under the following name Table 3 3 Names of the controls Wewnm File Manager Languag
30. png lt passwordIcon gt lt background gt true lt background gt For a complete list of possible XML tags with a description see table 3 1 XML tags 4 Expand the XML file within the control list tag In this example the default control of the menu item display will be replaced with custom text images and default values item lt name gt Display Settings lt name gt lt label gt Brightness Orientation Helligkeit Ausrichtung lt label gt lt icon gt FlashDrv monitor png lt icon gt control NWindowsNDisplaySettings dll control lt backgroundImage gt FlashDrv background grey png lt backgroundImage gt lt passwordProtected gt true lt passwordProtected gt lt background gt false lt background gt lt item gt For a complete list of possible XML tags with a description see table 3 2 Con trols XML tags Other standard controls can also be configured For a list of the names name see table 3 3 Names of the controls NOTICE The tags name label icon control backgroundlmage passwordProtected and background must be always available for controls Otherwise this control cannot be displayed 5 Open your FTP program or the Windows Explorer and enter the ip address of the operating device example 1 149 208 160 232 6 Copy the file user xml with the FTP program into the root directory of the op erating device 7 Copy the custom images also in the root directory of th
31. ricted No task bar and task switch available Desktop contains the cockpit icon only The change becomes effective on the next device reboot DeviceName MyName Defines the device name of the operating device DeviceName MyName Comment no impact Registry Restore Default Registry Destroys the current registry and activates the default registry of the image Save Registry The registry is saved completely Fonts Install Fonts The fonts in the default directory or user specific directory will be installed auto matically when you start the operating device Depending on the number and size of fonts the system start up take correspond ingly more time 18 Information IP Address V WINS DNS Device Name SNTP Cockpit Variants Fonts Directory The fonts in this directory are used if the Install Fonts option is active If no di rectory is given the appropriate default directory is used Product line s Memory type Default directory o Line E Line Internal FlashDrv Fonts M Line P Line Memory card StorageCard Fonts The following informations are displayed Device type Serial number Software bundle Image name Image date Operating system Operating system version 2 2 2 5 Network You can configure the network settings with the Network menu item Use Dynamic IP DHCP The network configuration is automatically obtained from the DHCP server Confirm y
32. selection with the green check You can start the cockpit via the desktop icon at already started operating devices with active desktop 1 Briefly press twice on the desktop icon 2 Press the button to start the cockpit before the progress bar is down You can customize the language of the cockpit interface at the language menu item 3 Press the button Language Selection 4 Select the desired language 5 Confirm your selection with the green check SUTRON Cockpit Variants 2 1 Windows CE 2 1 1 Menu Structure Start gt m Cockpit f Language Selection gt English German Current Users Add User p Delete User ED Date and Time gt Administration p Administration m p Start Batch File gt Apply Admin ini Registry Restore Default Registry Save Registry Fonts gt Don t Install Fonts Fonts Directory Information gt A Network IP Address WINS DNS Device SNTP gt A Password gt Update gt
33. ss the Recalibrate button Depending on device type the calibration is automatically started immediately or after a reboot of the operating device 2 Press the displayed marks to calibrate the touch 2 3 2 1 Write Filter This category offers the following functions Enhanced write filter EWF File based write filter FBWF Hibernate once resume many HORM The enhanced write filter EWF protects your system from write access and in stead writes the data to the main memory NOTICE With enabled write protection all data in the main memory of the operating de vice are lost after a restart FBWF HORM Cockpit Variants Enable EWF 1 Press the Enable EWF button 2 Confirm your selection with the green check 3 Restart the operating device for the changes to take effect Disable EWF 1 Press the Disable EWF button 2 Confirm your selection with the green check 3 Restart the operating device for the changes to take effect The file based write filter FBWF protects your system from write access and in stead writes the data to the main memory The selected folders are not protected NOTICE With enabled write protection all data in the main memory of the operating de vice are lost after a restart Enable FBWF 1 Press the Enable FBWF button 2 Confirm your selection with the green check 3 Restart the operating device for the changes to take effect Disable FBWF 1 Press the
34. ted exclusively to Qualified electricians or persons instructed by them who are familiar with appli cable standards and other regulations regarding electrical engineering and in particular the relevant safety concepts Qualified application programmers and software engineers who are familiar with the safety concepts of automation technology and applicable standards 1 6 SUTRON Cockpit Variants 2 Cockpit Variants Start cockpit at system startup Using desktop icon to start cockpit 4 BS V The range of the cockpit functions depends on the operating system of the oper ating device You find the function range as well as the description of the individ ual functions in the appropriate chapter with the name of the operating system of your operating device The start behaviour described below is same with all op erating systems The operating device allows you by starting the cockpit during the startup phase to make changes to the device configuration To start the cockpit do the following 1 Wait during the startup phase until the following dialog is displayed SUTRON Figure 2 1 Cockpit startup phase 2 Press the button to start the cockpit before the progress bar is down You can customize the language of the cockpit interface at the language menu item 3 Press the button Language Selection 4 Select the desired language 5 Confirm your
35. ware or surrounding property This symbol and the accompanying text provide the reader with additional infor mation or refer to detailed sources of information 1 2 Safety Notes Read this manual carefully before using the operating device Keep this manual in a place where it is always accessible to all users Proper transportation handling and storage placement and installation of this product are prerequisites for its subsequent flawless and safe operation This user manual contains the most important information for the safe operation of the device The user manual in particular the safety notes must be observed by all person nel working with the device Observe the accident prevention rules and regulations that apply to the operating site Installation and operation must only be carried out by qualified and trained per sonnel C SUTRON Important Notes 1 3 Intended Use The device is designed for use in the industry The device is state of the art and has been built to the latest standard safety re quirements However dangerous situations or damage to the machine itself or other property can arise from the use of this device The device fulfills the requirements of the EMC directives and harmonized Euro pean standards Any modifications to the system can influence the EMC behav lor 1 4 Target Group The use of products described in this manual is orien
Download Pdf Manuals
Related Search