Operating Instructions. Sound.
Contents
1. ll E If the Master Unit signal box or Articos 55 is equipped with a DVB module connect the digi tal output of the TV set to DIGITAL IN of the Certos system with a cinch cable if a DVB mod ule with Digital OUT terminal is installed use the DIS connection This ensures that the digital audio signal is fed to the Certos system for decoding How to connect the satellite speakers is de scribed on page 14 Speaker settings for the Certos system Observe the settings for the speakers of the Certos system see operating manual of the Certos system from page 25 Set small for front and surround speakers If the TV speakers are used as center speakers set TV if you want to use the external speaker as center set small For woofer select yes Also level speakers and set listener speaker distances as described in the Certos operating manual on page 27 120 240V E 50 60Hz Y 13 14 Connection Connecting the satellite speakers to the Cover on the subwoofer subwoofer 1 Remove the cover over the speaker connec tions from the satellite speakers settings Front left gt Peters 2 One of the two wires of the speaker cables is marked black Connect these black marked wires with the black terminal on the subwoofer and the black terminal on the satellite speaker Connect the unmarked wires with the red terminals 3 Push the cover over2. remo Sound 235 3167300 MANDAN TT Contents Tremo amplifier About this speaker system Scope of delivery Available accessories Installing the subwoofer and satellite speakers Connection 6 1 to the Loewe TV set with Dolby Digital Module to Articos 55 to the Master Unit with Spheros 42 HD 37 to the signal box to Loewe Auro 8116 DT 10 1 to Loewe Certos 12 1 Connecting the satellite speakers to the subwoofer 1 Mounting the satellite speaker on the S stand 1 Start up and operation 1 Selecting the center signal Switching the subwoofer on off Settings on the TV set Sound via Setting listener speaker distances and adjust ing speaker volumes Sound reproduction via Loewe TV with con nected Tremo speaker system Phase switch bass intensity Technical data 1 5 4 6 7 8 9 1 3 4 5 6 7 Contenu Amplificateur Tremo 21 A propos du syst me 22 Contenu de la livraison Accessoires disponibles Mise en place du Subwoofer et des haut parleurs satellites 23 Raccordement 24 32 au t l viseur Loewe quip du module Dolby Digital 24 a Articos 55 25 la Masterunit pour Spheros 42 HD 37 26 a la Signalbox 27 a l unit Auro 8116 DT de Loewe 28 29 a l unit Certos de Loewe 30 31 Raccordement des haut parleurs satellites au Subwoofer 32 Montage des haut parleurs satellites sur le support S Stand 33 Mise en service et utilisation 34 S lection du signal central Mise en marche
3. the speaker connections on the satellite speaker back on 4 Lay all cables in the subwoofer downwards to be able to fix them with the cable clip Connecting the subwoofer to the mains Plug the mains plug of the subwoofer into a 230 V AC socket Lay this cable downwards too Secure all the cables in the clip Open the cable clip at the bottom of the subwoofer lay all the cables in it and close the gt clip again This fixes the cables Surround left Replace the cover after making the following The center speaker can be omitted with Loewe TV sets from chassis MediaPlus Q2500 the center sound channel is reproduced by the TV speakers Center Front right gt Power OUT ON OFF ass Intensity Min ELA Center to ine IN Phase a TV Rat Sao Left E 180 up OOO JE BR HOOO Right Center Left System comector O O gue 230V 50 60Hz Master i Surround right gt Mounting the satellite speaker on the S stand You can mount the Tremo satellite speaker on the S stand See the installation instructions provided with the stand You do not need the following parts Flange 2 and the screws B C1 C3 Proceed as follows e Fix the conical base included in the scope of delivery of the Tremo speaker system in place of the flange at the top end of the pillar with the screw B Use the screws provided with the Tremo satellite speaker Note The screws can be foun
4. 20 Surr CO F noe SS Right Center Left Starr necia o 0 0 cen Hoe O 230V 50 60Hz NERO Switch for center signal Phase switch Cubic sockets for Loewe equipment Audio inputs of the Dolby Digital Decoder Cable clip p About this speaker system Congratulations on your purchase of this Loewe product The Tremo speaker system consists of a subwoofer with amplifier unit and five satellite speakers all of the finest quality The natural material ceramic forms the basis for the subwoofer housing It is made into the Tremo housing by a complex multi stage production process and skilled craftsmanship Every piece is an exclusive original with an individual touch The Tremo speaker system is designed for Loewe TV sets with a Dolby Digital Decoder and connec tion of the Loewe DVD Preceiver Auro 8116 DT or the Certos system You can then play DVDs in Dolby Digital cinema quality You can also convert stereo broadcasts or playbacks from a video recorder or DVD player in Dolby ProLogic Virtualize or Circle Surround into a 5 1 surround signal and play it over the Tremo speaker system If your TV is equipped with a digital tuner DVB and Certos or Auro 8116 DT are connected the received digital Surround signal is decoded and played over the Tremo system On the Tremo subwoofer you can set whether the speakers of the Loewe TV set from MediaPlus Q2500 are to transmit the center si
5. Arr t du Subwoofer R glages a effectuer sur le t l viseur Sortie du son par R glage de la distance position d coute haut parleurs et du niveau sonore des haut parleurs Restitution sonore par le t l viseur Loewe avec systeme de haut parleurs Tremo Inverseur de phase Intensit des basses Caract ristiques techniques 35 ndice Amplificador Tremo 39 Acerca de este sistema de altavoces 40 Volumen de suministro Accesorios disponibles Colocaci n del Subwoofer y de los altavoces sat lites 41 Conexi n 42 50 con el televisor Loewe con m dulo Dolby Digital 42 con Articos 55 43 con la Master Unit en Spheros 42 HD 37 44 con la caja de sefiales 45 con el Auro 8116 DT de Loewe 46 47 con el Certos de Loewe 48 49 conexi n de los altavoces sat lites al Subwoofer 50 Montaje de los altavoces sat lites en el S Stand 51 Puesta en marcha y manejo 52 Selecci n de la se al central Conexi n desconexi n del Subwoofer Ajustes en el televisor Sonido por Distancias oyente altavoz y nivelaci n de los altavoces Reproducci n de sonido a trav s del televisor Loewe con el sistema de altavoces Tremo conectado Conmutador de fase Intensidad de graves Datos t cnicos 53 Tremo amplifier N Power OUT 5 n ON OFF switch sel Surr L Terminals for connecting C satellite speakers Bass Intensity Controller for bass intensity Min NENA Center cd Line IN x g ht Subw Left
6. MO 2 GS Ra PIP UHF VHF SERVICE cel link RM Connection to TV sets with the signal box with built The Center connections do not necessarily How to connect the satellite speakers is de in Dolby Digital Module have to be made because the center signal is scribed on page 14 See the instructions for laying the cables on always played over the TV speakers The settings on the TV and on the subwoofer are described on page 16 page 6 y Power OUT oom all oom EL Front C cog Bass Intensity jo og Min EVA Center to Line IN P 2 E ht Subw Left 180 T 399 na H as Y iter Systemco ector 9 0 A A A 230V 50 60Hz o Gra ae DIGITAL AUDIO ln e OUT O 00 om PIP UHF VHF o 2 0 Y Ca Ps E Da HHH L HA L O To SERVICE 2 IR AUDIO RC6 Link IN2 JE TaT E RE mn ST Connection to Loewe DVD Preceiver Auro 8116 DT with Loewe TV set from Loewe TV MediaPlus Q2500 software 6 x If you use the Loewe DVD Preceiver in connec tion with a Loewe TV set connect the Tremo speaker system to the audio outputs of the DVD Preceiver See the instructions for laying the cables on page 6 Power OUT sur E oo co ooo BENE Bass Intensity L Min Max Center to Line Phase TV si TV Right Subw Left 70 180 So ex ST eT E E ter Left Systemcoi ecor QF 0 0 mes A A A 230V 50 60Hz Connect the cubic socke
7. Preceiver Set the Bass Inten sity knob on the subwoofer to the center posi tion before adjusting the speaker volumes Sound reproduction via Loewe TV from MediaPlus chassis Q2500 with Tremo speaker system connected If you temporarily do not want to use the Tremo speaker system and want to broadcast the sound exclusively through the Loewe TV speakers select Sound Sound via TV in the TV menu as described above Confirm with the OK key Note But please note the following for TV sets as of software 4 4 If you have switched over to sound reproduction via TV as described above the subwoofer may not be disconnected from the mains or switched off with the ON OFF switch or the cubic plug cable pulled out If you have done this the sound is reproduced via the Tremo speaker system after switching the subwoofer back on or after plugging in the cubic plug or mains plug In such a case you have to switch the TV off and back on so that the Tremo speaker system knows that you only want to hear the sound over the TV set Phase switch bass intensity The phase switch and the bass intensity knob enable you to optimise bass reproduction We recommend you to proceed as follows e If the subwoofer is in the corner of the room set the bass intensity knob to Min If the subwoofer is against a wall set the bass intensity knob to the center position If the subwoofer is standing freely in the room set the bass inte
8. V 50 60Hz The Center connections do not necessarily have to be made because the center signal is always played over the TV speakers PIP U VHF OD Note If the Tremo system is not selectable on your set in the TV menu Sound under Sound via have your dealer do a software update How to connect the satellite speakers is de scribed on page 14 The settings on the TV and on the subwoofer are described on page 16 COMPONENT AUDIO IN 3 AUDIO 7 IR AUDIO SYSTEM i LINK IN2 NE Connection to the Master Unit with Dolby Digital The Center connections do not necessarily Note If the Tremo system is not selectable on Module with Spheros 42 HD and Spheros 37 have to be made because the center signal is your set in the TV menu Sound under from software version 6 14 always played over the TV speakers Sound via have your dealer do a software See the instructions for laying the cables on page update 6 How to connect the satellite speakers is de scribed on page 14 The settings on the TV and on the subwoofer are described on page 16 Power OUT Bass Intensity Min VEDA Center to Line IN Phase Sd De Right Subw Left 180 a En EINAN AN D me iter Loft O R oe DIGITAL TV Masterunit AUDIO i R Systemcoi ector 9 O O Q Y le Qo ER e ni O L CE A OOL sary COMPONENT ANS A IN WASO r DIGITA a O AV1 AV2 E se H RGB RGB YUV AL
9. d with the speaker cable Feed the speaker cable from top to bottom through the conical base Leave about 5 cm of the speaker cable protruding Remove the cover over the connections from the Tremo satellite speaker Clamp the speaker cable in the clamp sockets Push the cover back on Pull back the speaker cable and place the Tremo satellite speaker on the conical base It is con nected with a bayonet catch with pins of differ ent widths so that the speaker can only be mounted so that the terminals come to rest directly over the speaker cable When the speaker has been inserted correctly in the bayo net pull the speaker cable back again and fix it with a quarter turn to the left If this proves difficult wet the rubber foot of the satellite speaker slightly with a damp cloth e Now lay the cable in the groove of the pillar 3x e Proceed as described in the installation in structions for the S stand The speaker cable of the Tremo satellite speakers has no plug connections the stripped cable is simply clamped in sockets AI IL p y q Pi ooo W Q 5 Start up and operation Select the center signal on the subwoofer Use the Center to switch to set whether the center signal is to be reproduced via the Loewe TV speakers or by a separately installed center satellite speaker Switch pressed center via TV set Switch not pressed center via satellite speaker When connecting directly to TV sets wit
10. e outputs of the Dolby Digital Decoder on the TV set with the audio inputs on the subwoofer Use the ribbon cable with the six cinch plugs The red and white plugs are addition ally labelled with F for front and S for surround Use the white plug for the left audio channel and the red plug for the right audio channel Use the black plug for the subwoofer signal and the grey plug for the center signal DIG IN m a SAT SERVICE A CTRL ni O Eo O DIG OUT SIRIO NINE mo di O L ees Y Es Connect the cubic sockets of both devices to each other Use the cable with the two cubic plugs Plug the white cubic plug in the Master cubic socket on the subwoofer There is no kink protection fitted to this plug Plug the black plug into the cubic socket on the TV set Pull out the bridge plug first if one exists Lay all cables in the subwoofer downwards to be able to bundle them with the cable clip later First lay the ribbon cable upwards and then downwards with a loop How to connect the satellite speakers is de scribed on page 14 The settings on the TV and on the subwoofer are described on page 16 Connection to Articos 55 with Dolby Digital Module from software version 6 20 See the instructions for laying the cables on page 6 Power OUT n none MECO Min VEDA Center to Line IN PN di tie ht Subw Left 180 OOO a mn DE UE coi ectr 9 O 0 Bass Intensity A AA 230
11. ge 12 and 13 7 12V 5mA 12 Connection to Loewe Certos with Loewe TV set from Loewe TV MediaPlus Q2500 software 6 x Connecting cable to Certos system Order no 88947 001 If you use the Loewe Certos system with a Loewe TV set connect the Tremo loudspeaker system to the audio outputs of the Certos system See the instructions for laying the cables on page 6 Power OUT 8 pura E EEE Bass Intensity Min NEVA Center to Line IN Phase n Sat TV Right Subw Left 7 0 180 s e IDAS fe O L RightC iter Left Systemcor ector NM 0 0 a e A 230V 50 60Hz Connect the bass module left hand socket on the Certos system to the cubic Master socket on the Tremo subwoofer using the connecting cable order no 88947 001 If the Loewe TV speakers are used for center reproduction connect the cubic socket on the TV with the Slave cubic socket on the subwoofer using the cubic plug cable Set the Center to switch on the subwoofer to TV If on the other hand you want to use the exter nal center loudspeaker do not connect the Slave to the TV Set the Center to switch on the subwoofer to Sat Connect the TV set Euro AV socket 3 to the Certos system with the Euro AV cable OS 2a Op SERVICE i CTRL Q AID E ra lo DIG OUT een AV2 RGB A R MRO OUT VHF UHF O L DO BA SUBWOOFER STAND Connect t
12. gnal or whether the satellite speaker provided is to be used for this In sets with signal box and in Articos 55 the cen ter signal is always played over the TV speakers The Tremo speaker system switches on and off automatically with the Loewe TV set the Loewe DVD Preceiver or the Certos system You can make the settings for Dolby Digital com fortably using the Loewe TV menus or when using Certos or the DVD Preceiver Auro 8116 DT with their menus Of course you can also operate this speaker sys tem on an external decoder then it is not possible to use the TV s speakers as center speakers and the Tremo speaker system has to be switched on and off manually Scope of delivery 1 subwoofer 5 satellite speakers with conical base for stand 1 6 wire connecting cable 6 m for the output signals of the Dolby Digital Decoder or the Loewe DVD Preceiver to the subwoofer connecting cable with cubic plugs 6 m to the cubic socket of the Loewe TV set from chassis MediaPlus Q2500 speaker cables from the subwoofer to the satellite speakers in different lengths 3 x 5 m 2x 1 5 m and this operating manual A VI Available accessories Tremo platinum wall holder order no 63299A00 Tremo cream wall holder order no 63299K00 S stand can also be used for Tremo satellite speakers Order no 61250B00 Connecting cable to Certos system Order no 88947 001 Installing the subwoofer and satellite speakers The
13. h Master Unit or signal box and direct connection to Articos 55 this switching is not possible because the center signal is always played back over the TV speakers Switching the subwoofer on off You switch the Tremo speaker system on with the ON OFF switch If the subwoofer is connected to a Loewe TV set the Loewe DVD Preceiver or the Certos system you no longer need to switch on and off on the subwoofer After switching on the subwoofer for the first time it is always subsequently switched on and off automatically with the Loewe device Settings on the TV set Sound via If the Tremo speaker system is connected to the Dolby Digital Module of the TV set 1 Call the TV menu with M or MENU 2 Select Sound with the arrow buttons v a 3 Call the Sound menu with OK 4 Select the menu item Sound via in the Sound menu with the arrow buttons v a 5 Select Tremo with the arrow buttons 4 gt and confirm with OK Now the sound of the TV set is transmitted by the satellite speakers and the subwoofer Note If Tremo is not selectable on your Loewe TV in the TV menu Sound under Sound via have your dealer do a software update Setting listener speaker distances and adjusting speaker volumes Setting of the listener speaker distances and adjusting of the speakers to the same volume are carried out according to the operating instruc tions of the Dolby Digital Module the Certos system or the DVD
14. he TV SERVICE socket to the TV S Link socket of the Certos system with the L Link cable provided with the Certos system This ensures that the Tremo speaker system is switched on but the TV stays switched off in the case of radio or CD playback from the Certos system If the TV set is equipped with a DVB Module with Digital OUT terminal and or the DIS Mod ule connect the digital output of the TV set to DIGITAL IN of the Certos system by a cinch cable if a DVB module with Digital OUT terminal and a DIS module is available use the DIS connec tion This ensures that the digital audio signal is fed to the DVD Preceiver for decoding How to connect the satellite speakers is de scribed on page 14 Speaker settings for the Certos system Observe the settings for the Certos system speakers see operating manual of the Certos system from page 25 Set small for front surround and center speak ers Select yes for woofer Adjust the speakers level and also set the lis tener speaker distances as described on page 27 of the Certos operating manual Connection to Loewe Certos with Articos 55 from Software 6 15 with Master Unit for Spheros 42 HD and Spheros 37 from Software 6 20 or with the signal box Connecting cable to the Certos system Order No 88947 001 If you use the Loewe Certos system with a Loewe TV with signal box or Articos 55 connect the Tremo speaker system to the audio outputs of the Certos sy
15. nsity knob to Max Start playing a DVD for example Have a second person activate the phase switch whilst you sit and listen Decide for yourself which switch position reproduces the best bass sound Also set the bass intensity to suit your taste Technical data General Subwoofer transmission range Satellite transmission range Mains voltage Max power consumption Nominal power consumption Power consumption on standby Features Digital output stages Subwoofer channel rated music output Satellite channels rated music output Bass intensity 12 dB Phase switch Power switch System link Upgrade kits accessories Speaker cables satellites FR FL Center Speaker cables satellites SR SL Cubic plug cable Cinch cinch cable Adapter for stands Tremo wall holder accessory Dimensions WxHxD with speaker in cm S stands Dimensions diameter of base plate x height with speaker in cm Miscellaneous Diameter height subwoofer in cm Diameter height satellites in cm Weight subwoofer in kg Weight satellites in kg Colour versions subwoofer satellites Printed in Germany 5 09 04 2 5 Modifications without subject 40 Hz 150 Hz 150 Hz 20 kHz 220 240 Volt 250 Watt 50 Watt lt 0 5 Watt 6 channels 50 65 Watt 30 40 Watt 3x5m 2x15m 6m 6m 5 Set 2 pieces 6 8x16x10 5 Set 2 pieces 25x103 30 5x51 5 10 5x16 15 1 cream platinum anthracite 18
16. of the Auro system by a cinch cable if a DVB module with Digital OUT and a DIS module are available use the DIS connection This ensures that the digital audio signal is fed to the DVD Preceiver for decoding How to connect the satellite speakers is de scribed on page 14 Settings on the DVD Preceiver Auro 8116DT In the DVD menu under Settings select Tremo as the speaker system set the listener speaker distances and level the loudspeakers See also the DVD Preceiver manual page 12 and 13 Connection to the Loewe DVD Preceiver Auro 8116 DT with Articos 55 from Software 6 15 Master Unit in Spheros 42 HD and Spheros 37 from Software 6 20 or with the signal box If you use the Loewe DVD Preceiver in connec tion with a Loewe TV set connect the Tremo speaker system to the audio outputs of the DVD preceiver See the instructions for laying cables on page 6 Connect the cubic socket on the DVD Preceiver to the Master cubic socket on the Tremo subwoofer Use the cubic plug cable provided with the DVD Preceiver Auro 2 wire cable Plug the white plug without kink protection into the cubic socket on the subwoofer If the speakers of the Loewe TV set are used for center playback connect the cubic socket on the TV set to the Slave cubic socket on the subwoofer with the cubic plug cable Set the Center to switch on the subwoofer to TV If on the other hand you want to use the exter nal Center l
17. oudspeakers do not connect the Slave and the TV set Set the switch Center to on the subwoofer to Sat Connect the TV set Euro AV socket 2 for signal box or Euro AV socket 3 for Articos 55 and the Master Unit for Spheros to the DVD Preceiver with the Euro AV cable Power OUT UT cc telo Bass Intensity Mi NEVA Center to Line Phase Sat TV 1 Sy YE af MAG A L RightC iter Left Systemco ector 9 Q 0 NES g a A A L 230V 50 60Hz JN VEGI PIP UHF VHF e L Signalbox DIGITAL INI N2 OUT rT COCCO n serie RC5 IR AUDIO kes Link ka COTY E Connect the TV set Service socket to the TV L Link socket of the DVD Preceiver with the L Link cable enclosed with the DVD Preceiver This ensures that the Tremo speaker system is switched on for radio or CD playback but the TV stays switched off Connect the digital output of the TV set to the DIGITAL IN input of the Auro system by a cinch cable if a DVB module with Digital OUT termi nal is installed use the DIS connection This ensures that the digital audio signal is fed to the DVD Preceiver for decoding How to connect the satellite speakers is de scribed on page 14 Settings on the DVD Preceiver Auro 8116DT In the DVD menu under Settings select the Tremo speaker system set the listener speaker distances and level the speakers Also see the DVD Preceiver manual pa
18. satellite speakers should all be positioned at ear height i e about 1 meter above the floor Use the available stands or wall holders or place the speakers at the appropriate height on pieces of furniture or on shelves The speakers and the TV set can be arranged as illustrated below The front and surround speakers should be placed symmetrically with the TV set and the place where you are sitting Front left Subwoofer You can position the subwoofer anywhere on the floor We recommend you to place it in one of the front corners of the room so that the bass signals radiate freely Subwoofer Surround left Bi When making the settings for initial start up enter the distances of the center speaker front and surround speakers from where you are sitting Delay times of the speakers in relation to each other are calculated and set by the Dolby Digi tal Module You also adapt the volume of every speaker in the settings for initial start up Surround right U Connection to the Loewe TV set with Dolby Digital Module MediaPlus Q2500 Q2550 Pull off the subwoofer cover to the back Open the cable clip You will use this later to bundle the cables A Power OUT HE jE GE qa Front P oe Min VENA Center to Line IN Phase TV Right Subw Left 0 180 0 00 O i L RightC ter Left Systemcoi ector FY OF O Surr Bass Intensity A AA 230V 50 60Hz Connect th
19. stem See the instructions for laying the cables on page 6 Power OUT Bass Intensity Min VEDA Center to Line IN Phase Ls ht Subw Left a 180 Surr piolo o Ei 50 Bi n DIO D Systemcot scor M 0 q i o na o 230V 50 60Hz VECINA With the connecting cable order no 88947 001 connect the bass module link socket to the Certos system with the cubic socket Master on the Tremo subwoofer If the TV speakers are used for center playback connect one of the two AUDIO IN 3 inputs on the signal box or Articos 55 to the Center con nection on the Certos system with a cinch cable If on the other hand you want to use the exter nal Center speakers do not make the connec tion between the Certos system and AUDIO IN 3 described above In this case connect the Center connection of the Tremo bass module to the center output of the Certos system this connection is shown by a dotted line in the drawing Set the Center to switch to Sat Connect the TV set Euro AV socket 2 for signal box or Euro AV socket 3 for Articos 55 and the Master Unit for Spheros to the Certos system with the Euro AV cable Connect the signal box or the Articos 55 SER VICE socket to the TV S Link socket of the Certos system with the L Link cable enclosed with the Certos system This ensures that the Tremo speaker system is switched on for radio or CD playback but the TV remains switched
20. t on the DVD Preceiver to the Master cubic socket on the Tremo subwoofer Use the cubic plug cable provided with the DVD Preceiver Auro 2 wire cable Plug the white plug without kink protection into the cubic socket on the subwoofer If the Loewe TV speakers as of chassis MediaPlus Q2500 are used for center reproduction connect the cubic socket on the TV with the Slave cubic socket on the subwoofer using the cubic plug cable Use the cubic plug cable provided with the Tremo speaker system Plug the white plug with out kink protection into the cubic socket on the subwoofer Set the Center to switch on the subwoofer to TV If on the other hand you want to use the exter nal center speaker do not connect the Slave to the TV DIGIN ox i Op SE ICE i CTRL SAT Q a DIG OUT AV2IRGB VHF UHF T 12V I5mA Set the Center to switch on the subwoofer to Sat Connect the TV set Euro AV socket 3 to the DVD Preceiver with the Euro AV cable Connect the TV Service socket to the L Link socket of the DVD Preceiver with the TV L Link cable provided with the DVD Preceiver This ensures that the Tremo speaker system is switched on but the TV stays switched off in the case of radio or CD playback from the DVD Preceiver If the TV set is equipped with a DVB module with Digital OUT terminal and or the DIS module connect the digital output of the TV to the DIGI TAL IN input
Download Pdf Manuals
Related Search