Home

A-61651, User's Guide for the Kodak i4000 Series Scanners

1. EMC statements United States This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for additional suggestions Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product they must be
2. oooWooWomomWoW na 4 3 RUNANI a PIO ada 4 5 Changing PART Pos On Sean anna 4 8 Installing Replacing the ink blotter StripS oooooooonncccccccncnnccncccnnncnccnncnonanos 4 9 Problem solving eee 4 10 This chapter provides information for using the optional Kodak Enhanced Printer In order to use the printing option you must have purchased and installed the Enhanced Printer Accessory NOTE See the instructions that came with the Enhanced Printer Accessory for procedures on how to install this accessory Refer to the Scanning Setup Guide for the TWAIN Datasource or ISIS Driver on the CD or your scanning application documentation for more information about enabling printing and setting up print strings The Enhanced Printer operates at full scanner speed The printer can add a date time document sequential counter and custom messages The print string can be configured to include information that stays the same for each document such as batch name or operator and information that may change for each page scanned i e the document sequential counter All printer controls and functions are accessible through the TWAIN Datasource or ISIS Driver NOTES e Printing must be enabled and an ink cartridge must be installed before starting a scan session e Clean the scanner s paper path components daily when using the printer e You cannot print on documents that are smaller than 10 cm 4 in in length e If you attempt to scan wi
3. 9 Inspect the tires If the tires show signs of wear or damage replace the feed module tires See Replacement procedures later in this chapter Cleaning the Flippable 10 Wipe the upper and lower background strips with a Staticide wipe White background strips DMA AEB MM Al 7 Tm 1 wi yh ANA I l a Ih I j I i i sog ml 1 AL pi T LE i a hem IN 1 1 En 11 Wipe the upper and lower background strips again with an almost dry Staticide wipe to remove any streaks 5 6 A 61651 November 2012 Cleaning the imaging 12 Wipe the upper and lower imaging guides with a Staticide wipe guides basic cleaning 13 Wipe the upper and lower imaging guides again with an almost dry Staticide wipe to remove any streaks 14 Close the scanner cover A 61651 November 2012 5 7 Cleaning the imaging guides thorough cleaning Thorough cleaning of the imaging guides is recommended at the start of the day and beginning of each shift NOTE Hold the imaging guides at the green tabs to avoid getting fingerprints on the imaging guides during the cleaning procedure Upper imaging guide 1 Open the scanner cover 2 Turn the screw to the left on each end of the upper imaging guide and remove it from its position Set the imaging guide aside i Par EE a Sg lt a s 5 E E A ii F U a owl z TT 3 Carefully vacuum the area between the LEDs IMPORTANT Avoid contact wi
4. Vertical lines appear on the image e Clean the imaging guides Refer to Chapter 5 Maintenance e Enable the Streak Filter option or increase the aggressiveness Documents are multifeeding Make sure that e the leading edges of all batched documents are centered in the feeder so that each document will come in contact with the feed rollers e the feed module and separation roller are clean and not worn e documents with an unusual texture or surface are fed manually e the gap release toggle switch is not pushed in U3 is displayed in the function window The documeni s you are trying to scan is too long e Verify that the Document Management Maximum Length option on the Device General tab TWAIN Datasource or the Longest Document option on the Scanner tab ISIS Driver is set to longer than the longest document being scanned The default is 43 2 cm 17 inches e Decrease the resolution Indicator lights and Steady green the scanner is scanning error codes Fast flashing green waiting for operator action Slow flashing green the scanner is in power saver mode Steady red indicates a scanner error such as the scanner cover is open Steady red then flashing green scanner is powering up After you power up the scanner the red and green indicator lights flash After approximately 12 seconds both lights go out When the green indicator light comes back on and the function window displays 1 the scanner is ready to beg
5. e The scanner model and serial number e Computer configuration e Scanning application you are using 6 4 A 61651 November 2012 Appendix A Specifications Scanner Type Speed e 14200 Scanner duplex color scanner with an automatic document feeder 100 pages per minute landscape at 200 dpi black and white e 4600 Scanner duplex color scanner with an automatic document feeder 120 pages per minute landscape at 200 dpi black and white Scanning Technology Dual CCD Output Resolutions 100 150 200 240 300 400 and 600 dpi File Format Output TIFF JPEG PDF with bundled software Scan Area Scans up to 30 5 x 330 2 cm 12 x 130 inches See the section entitled System requirements for more information ADF Capacity 500 sheets Recommended Daily 14200 30 000 pages per day Volume 14600 50 000 pages per day Electrical Requirements 100 240 V international 50 60 Hz Scanner Dimensions Height 34 94 cm 13 7 in Width 46 0 cm 18 1 in Depth 46 7 cm 18 4 in 34 28 kg 75 6 lb 15 C to 35 C 59 F to 95 F Power Consumption Sleep mode lt 3 watis Scanner Running lt 85 watts Off lt 0 5 watt Acoustic Noise Operating less than 66 dB Sound Power level Off mode or Ready mode less than 51 dB Power Consumption Sleep mode lt 6 watis with A3 Flatbed Running lt 70 watts Electrical rating 1 N PE 100 240 VAC 1 0 0 5A 50 60 Hz A 61651 November 2012 A 1 System requirements Followin
6. or an authorized packaging box for the units being returned Purchaser must install the shipping restraint before the Kodak Scanner is shipped When the original packaging is not available contact Kodak s Response Center at 800 822 1414 for part numbers and replacement packaging ordering information Return procedure Eligible purchasers seeking services for Kodak Scanners covered under this Limited Warranty must obtain a Return Material Authorization number RMA by calling 800 822 1414 and within ten 10 business days from the date of issuance of the RMA must return the Kodak Scanner to the address designated in the RMA at the end user s own expense and risk in compliance with Kodak s current Packaging and Shipping Guidelines Any defective products or parts replaced by Kodak become the property of Kodak Customer responsibility BY REQUESTING SERVICE THE ELIGIBLE PURCHASER ACKNOWLEDGES THE TERMS OF THE LIMITED WARRANTY INCLUDING THE DISCLAIMER AND LIMITATION OF LIABILITY PROVISIONS PRIOR TO SEEKING SERVICE THE END USER MUST BACK UP ANY DATA OR FILES THAT MAY BECOME DAMAGED OR LOST KODAK IS WITHOUT LIMITATION NOT RESPONSIBLE FOR LOST OR DAMAGED DATA OR FILES Warranty Service descriptions Eastman Kodak Company Kodak offers a range of service programs to support its Limited Warranty and to assist with the use and care of the Kodak Scanner Service Methods A Kodak Scanner represents an important investment Kodak
7. 15 seconds to complete the power up sequence and be ready to scan When the installation process is complete and ready to scan the green LED on the Start Resume button will stop flashing and remain constant and the number 1 will be displayed in the function window If any other number is displayed see the section entitled LED error codes in Chapter 6 for an explanation of these codes Turning the scanner e Press the Power button for one second off 2 4 A 61651 November 2012 3 Scanning Contents Se o 3 1 Getting your scanner ready tO SCAN ooooWo Woo om 3 1 Adjusting the input elevator Woo Wa 3 2 Installing the document extender oooWoW Woo Waka 3 4 Adjusingne oUtput AY en Ki BNN Bb 3 4 Getting your documents ready tO SCAN ooooWo Wo WoW oo 3 6 Selecting your scanning application ooWoo Woo 3 7 Quick start Kodak i4000 Series Scanners were designed to be easy to use and get you scanning quickly All you need to do to start scanning to PDF is place your documents in the input elevator press the Scroll button to display 2 and press the Start Resume button It s that easy To learn more about all the features of your Kodak i4000 Series Scanner read the rest of this chapter Getting your scanner 1 Be sure the scanner is on and ready to scan Start Resume button LED is ready to scan green and constant NOTE If any function codes i e U1 U2 etc are displ
8. Scanners provide the productivity needed to stay competitive The sudden loss of this productivity even temporarily could seriously affect the ability to meet commitments Downtime can be very expensive not just in the cost of the repair but also in time lost To help alleviate these problems Kodak may use one of the service methods listed below depending upon product type in providing service under its Limited Warranty Included with selected Kodak Scanners is a Limited Warranty Registration card and a Limited Warranty Summary card The Limited Warranty Summary card is specific by model The Limited Warranty Summary card contains important warranty information including the model number and the Limited Warranty Refer to the Limited Warranty Summary card to determine the available Service Methods applicable to the particular Kodak Scanner If the Limited Warranty Registration card or Limited Warranty Summary card cannot be located additional information may be obtained about the product including updated warranty and service program information and restrictions online at www Kodak com go disupport or by phone at 800 822 1414 To avoid service delays Kodak urges end users to complete and return the enclosed Limited Warranty Registration Card at the first opportunity If you cannot locate the Limited Warranty Registration card you may register online at www Kodak com go disupport or by phone at 800 822 1414 Kodak also provides a variety
9. ennn 5 5 Cleaning the feed module tires oo Woman 5 6 Cleaning the Flippable White Background Strip S oo 5 6 Cleaning the imaging guides basic cleaning oooooo 5 7 Cleaning the imaging guides thorough cleaning 5 8 Running a transport cleaning Sheet oooooooWoWooWmoo 5 10 FINE Cl anna SiS usa 5 10 Replacement procedures oooooWo W Woo Woo mm maan 5 11 Replacing the feed module or feed module tires ooooo 5 11 Replacing the separation roller or separation roller tires 5 14 Replacing the pre separation pad oWooWooocck 5 15 Replacing the imaging guides oWoWooooo aan 5 16 Replacing the Flippable White Background strip S oo 5 16 Supplies and consumables oo WWW WoW WWW maa 5 17 This chapter describes the reguired cleaning and maintenance procedures for the Kodak i4000 Series Scanners The freguency of these procedures will vary with different scanning environments paper types and image processing reguirements High volumes of scanning will demand more freguent cleaning of the scanner and more freguent replacement of consumables Lower scanning volumes will allow longer times between these activities Refer to the Cleaning freguency chart on the next page for cleaning guidelines However you will need to determine what works best for you Years of Kodak s production scanning
10. experience proves that properly cleaning and maintaining your scanner will result in scanning more paper in less time with less issues A properly maintained i4000 Series Scanner will provide years of trouble free operation Scanner consumables tires pre separation pads etc and cleaning supplies are available from resellers web merchants and from the Kodak on line store http scannerstore kodak com Consumables are sold in kits of various sizes The kits contain the proper mix of tires rollers and pre separation pads so you can easily replace them at the recommended rate For example only replacing the tires and never replacing the separation roller will eventually minimize scanner performance Replacing the consumables at the recommended freguency will ensure the best performance A 61651 November 2012 5 1 Cleaning frequency chart Cleaning tools and materials Opening the scanner cover A recommended cleaning sequence includes vacuuming the scanner transport cleaning the residue from the feed module tires separation roller tires and drive rollers and cleaning the imaging guides Use the chart below as a guide to how frequently you should clean your scanner Procedure Start of Middle of Start of new day shift shift Vacuum output tray and input X areas input elevator and transport cemas S a eeumtanaporaa x f o Pun vanspor cleaning shest x f o Crean imaging guides vase x x x Crean imaging guides
11. extender if you are scanning documents longer than 43 2 cm 17 inches Three sizes of document extenders are available for scanning documents from 43 2 cm 17 inches to 86 36 cm 34 inches See the section entitled Supplies and Consumables in Chapter 5 e Document weights the maximum document weight for the input elevator is the approximate weight of an A3 11 x 17 inch 500 sheet ream of paper If you are scanning documents larger than A3 11 x 17 inch the recommended weight capacity should not exceed 4 5 kg 10 pounds If the documents you are scanning are larger than A3 11 x 17 inch scan less than 100 sheets at a time A 61651 November 2012 3 3 Installing the document e Insert the ends of the document extender into the holes on the input elevator extender or the output tray and lower the extender into position WERI sa N y 3 1 i W Adjusting the output tray The Kodak i4000 Series Scanners are designed with improved stacking performance which allows most users to scan documents without the assistance of the output tray side guides and document stop With one or both side guides down and the height adjustment tab raised you can quickly and easily remove the scanned documents from the front right or left side of the scanner Try using this method before using the side guides and document stop NOTE If you find it more convenient to use the side guides and document stop see the next section for adjus
12. more information 7 Close the printer access cover and reinstall the output tray 8 Run a print test see the next section Running a print test You can only run a print test by using the Kodak Scan Validation Tool 1 Place a blank sheet of paper in the input elevator 2 Ensure that the ink cartridge is properly installed 3 Select Start gt Programs gt Kodak gt Document Imaging gt Scan Validation Tool Scan Yalidation Tool A Driver Types Cancel Drivers KODAK Scanner 4000 4 Select TWAIN for the Driver Type and the KODAK Scanner i4000 The Scan Validation Tool dialog box will be displayed E Scan validation toot ran EICC Ee 09100185 EH W Save Images To Files Display Every li Total Last File O O A 61651 November 2012 4 5 5 Click the Setup icon The Scan Validation Tool main window will be displayed FKODAK i4200 Scanner 1 Black and White Perfect Page Document A Color Perfect Page Document FP KODAK i4200 Scanner K PE MSI MAMA AM SLED TARA EAR AER EAR ARERR FA PARA FARARA FAN BP Color 24 bit gt E _ Pare P 7 Besolutic Y i jo Ba Foppe type FE a a 7 On the General tab click the Device button 4 6 A 61651 November 2012 8 On the Device General tab click the Diagnostics button The General Diagnostics window will be displayed it xi Gene
13. moron x f Use only these cleaning tools and materials when performing routine maintenance on your scanner Use of any other cleaning materials could damage your scanner e Kodak Digital Science Transport Cleaning Sheets e Kodak Digital Science Roller Cleaning Pads e Staticide wipes for Kodak Scanners e Avacuum cleaner and tools 1 Power down the scanner 2 Remove any documents from the input elevator transport and output tray En Pull the scanner cover release latch forward The scanner cover will open partially Raise the cover up to fully open the cover for access to the internal components 4 When finished cleaning the scanner or replacing a consumable close the scanner cover with both hands A 61651 November 2012 Cleaning procedures Cleaning your scanner and performing preventative maintenance on a regular basis is required to ensure the best possible image quality Some document types generate more paper dust and debris and may require more frequent cleaning Before cleaning your scanner or replacing consumables review the following information e Some debris from the rubber tires on the feed module and separation roller is normal Tire debris does not always mean that the tires are worn or damaged After cleaning inspect the tires for wear and replace the separation roller or feed module if necessary e When cleaning rollers tires allow the rollers tires to dry completely before scanning e Use
14. of service programs that may be purchased to assist with the use and care of the Kodak Scanner Kodak is committed to providing its customers with quality performance reliability and service under the Limited Warranty B 2 A 61651 November 2012 On site service For the selected Kodak Scanner and after the Response Center verifies a hardware problem a service call will be opened and logged An Kodak Field Engineer will be dispatched to the product location to perform repair service if the product is located within the contiguous forty eight 48 United States in certain areas of Alaska and Hawaii and if there are no security safety or physical requirements that would restrict the Field Engineer s access to the scanner For additional information on service areas visit our website at www Kodak com go docimaging On Site Service will be provided between the hours of 8 a m and 5 p m local time Monday through Friday excluding Kodak holidays AUR AUR may be one of the easiest and most comprehensive service offerings in the industry In the unlikely event of a product defect for eligible purchasers of certain Kodak Scanners Kodak will replace that product within two business days The AUR provides advance replacement on specific failed or broken Kodak Scanner To be eligible to take advantage of the AUR the eligible purchaser must obtain an RMA number sign an Advance Replacement Agreement and provide a credit card deposit to secure the r
15. only the recommended cleaning supplies Using unapproved cleaning fluids or solvents may damage the rubber tires e Do not use cleaners in confined areas use with adequate ventilation e Do not use cleaners on hot surfaces Allow surfaces to cool to ambient temperature before use e Do not use canned compressed air Use of compressed air may cause dust to be forced into the scanner s imaging system and lodge in an area that causes image quality issues and cannot be cleaned without removing the camera e Do not use flammable compressed aerosols on or around the scanner e In addition to the recommended cleaning supplies you may use a vacuum cleaner to remove debris from the scanner e Staticide Wipes contain isopropanol which can cause eye irritation and dry skin Wash your hands with soap and water after performing maintenance procedures Refer to the Material Data Safety Sheet MSDS for more information The MSDS is available on the Kodak web site at www kodak com go MSDS NOTE To access the MSDS you will need to provide the catalog number of the supply See Supplies and Consumables later in this chapter for catalog numbers e The roller cleaning pad contains sodium lauryl ether sulfate and sodium silicate which can cause eye irritation Refer to the MSDS for more information A 61651 November 2012 5 3 Vacuuming the output tray 1 Power down the scanner and input elevator 2 Remove the output tray 3 Thor
16. s Guide for Smart Touch on the Installation CD e Kodak Capture Desktop Software an intuitive and easy to use capture software application specifically designed to make processing and sharing scanned documents easy With Kodak Capture Desktop Software you ll receive out of the box production and be able to immediately capture edit and output anything from single documents to larger batches in distributed or departmental environments Along with the essentials for easy and productive scanning Kodak Capture Desktop Software shares the design and interface of Kodak Capture Pro Software which offers many more advanced capabilities for image and data capture automation Through a complete set of icon based tools and other features Kodak Capture Desktop Software offers simplified scanning Quickly and easily scan to file create searchable PDFs or integrate your information into a common location such as Microsoft SharePoint Kodak Capture Pro Software is also available for use with the Kodak i4000 series Scanners Go to www Kodak com go capturepro for more information Many other companies have included support for Kodak i4000 Series scanners in their scanning applications Contact these companies for assistance in using these applications UIII A 61651 November 2012 3 7 4 Document Printing Contents Printer specifications oooooooooooooo oo Woo oo Woo matan 4 2 Installing Replacing the ink cartridge
17. tray 5 Document stop aids in document stacking You can slide this stop in or out to accommodate the size of documents you are scanning or it can be folded flat on the output tray 6 Output tray height adjustment tab this tab should be pulled out to raise the front of the output tray when scanning for improved document scanning When the output tray is lifted this tab automatically releases and rests on the print access cover 7 Function window displays 0 9 These numbers correspond to a predefined function Other display patterns are also used to indicate scanner status or operator action See Chapter 6 for more information 8 Scanner cover release latch pull the lever forward to open the scanner cover 9 Scroll button allows you to select or scroll through predefined functions or applications for scanning 10 Start Resume button press to start or resume scanning Also includes a green LED indicating scanner status i e power is on and ready to scan A 61651 November 2012 1 3 11 12 13 14 15 16 17 Stop Pause button press once to temporarily pause scanning the Start Resume button can then be used to resume scanning Press twice to stop scanning The red LED on this button indicates a possible error condition has been detected i e document jam Power button press to turn the scanner on or press and hold for one second to turn the scanner off Input Elevator side guide
18. used in order to ensure compliance with FCC regulation Korea As this equipment has obtained EMC registration for household use it can be used in an area including residential areas AS 141222 AA DABS S Ss Y AISA AAA AS SE ASA 142 Deut Japan This is a Class B product based on the standard of the Voluntary Control Council for interference by information Technology Equipment VCCI If this is used near a radio or television receiver in a domestic environment it may cause radio interference Install and use the according to the instruction manual TAFRMLIB SE ee ee K Rann SANG 1 Overview Contents Supporting documentation oooooooooooooooo oo oo Woo Wo oo Wo 5 Ae ON aar T E E E E E Andai 1 2 is A en EE 1 2 Scanner COMpONENES ooo W W Woo W WWW 1 3 The Kodak i4000 Series Scanners include the following models to 100 pages per minute 200 dpi black and white landscape orientation lettersize documents Kodak i4600 Scanner desktop duplex color scanner than scans up to 120 pages per minute 200 dpi black and white landscape orientation lettersize documents This User s Guide provides information and procedures for using and maintaining the Kodak i4000 Series Scanner The information in this guide is for use with both models unless otherwise noted Su pporting In addition to this User s Guide the following documentation is also available documentation e Installation Guid
19. within 1 52 meters 5 feet of the scanner and is easily accessible e When disconnecting equipment from the electric socket be sure to grasp the plug not the cord e Be sure the power cord is securely plugged into the wall outlet Failure to do so may cause electrical shock or fire e Do not damage knot cut or modify the power cord or use a damaged power cord This may cause electrical shock or fire e The scanner requires a dedicated and properly grounded power outlet Do not use an extension cord or power strip with the scanner e Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency e Do not use the scanner if it becomes inordinately hot has a strange odor emits smoke or makes unfamiliar noises Immediately stop the scanner and disconnect the power cord from the power outlet Contact Kodak Service e Do not disassemble service or modify the scanner except as explained in the User s Guide e Do not move the scanner with the power cord and interface cable attached This may cause damage to the cord cable Remove the power cord from the wall outlet before moving or relocating the scanner e Follow the Kodak recommended cleaning procedures Do not use air liquid or gas spray cleaners These cleaners displace dust dirt and debris to other locations within the scanner which may cause the scanner to malfunction e Material Safety Data Sheets MSDS for chemical products are available on th
20. A 61651 5K1628 4000 Series Scanners User s Guide User s Guide on Installation CD Guide d utilisation sur le CD d installation Benutzerhandbuch auf der Installations CD Manuale per l utente sul CD di installazione Gu a del usuario en el CD de instalaci n Guia do Usuario no CD de instalacao Gebruikershandleiding op installatie cd Kurulum CD sindeki Kullanim Kilavuzu U ivatelsk p ru ka na instala n m disku CD ZEKE CMAPS Ze IRL SAS 4 Y A R JCDOI1 HF AXA HD 4 R M CD2 AS EM Cu l yal Ja gia ya ill gle arial Jala PyKOBOACTBO MOJIb3OBATENA Ha YCTAHOBOYHOM KOMNAaKkT 1UCKe Ghidul utilizatorului de pe CD ul de instalare Felhaszn l i tmutat a telep t CD n Podr cznik u ytkownika na instalacyjnym dysku CD Odny c xp ons oto CD eykatr otaong OVERVIEW INSTALLATION SCANNING DOCUMENT PRINTING MAINTENANCE TROUBLESHOOTING APPENDICIES 1 1 2 1 3 1 4 1 9 1 6 1 Safety User Precautions e Place the scanner on a sturdy level work surface capable of supporting 38 8 kg 85 5 lbs and leave adequate clearance on all sides of the scanner e When relocating the scanner it is recommended that two people lift the scanner and use safe lifting techniques e Do not install the scanner in a location subject to dust humidity or steam This may cause electrical shock or a fire Only use the scanner indoors in a dry location e Make sure the electrical power outlet is located
21. Check to be sure the USB cable is in good working condition and is securely plugged into the PC and USB port e Be sure the software is loaded e Verify that the PC is recognizing the scanner 1 Click Start gt Settings gt Control Panel gt Administrative Tools gt Computer Management to display the Computer Management window select Device Manager and select your PC ni S File A View Window Help Poe 4 amaga 2 Computer Management Local E ih System Tools El al Event Viewer 4 Shared Folders ES z Local Users and Groups E Performance Logs and Alert 3 Device Manager il Batteries Y Computer sw Disk drives 8 Display adapters 15 DVD CD ROM drives 4 3 Human Interface Devices 2 IDE ATAJATAPI controllers Meme E 63 Storage 8 Imaging devices 5 gt Keyboards Removable Storage Disk Defragmenter Disk Management Y Mice and other pointing devices ca Hkg Services and Applications As Modems 22 Monitors BS Network adapters B PCMCIA adapters HY Ports COM amp LPT ge Processors El Ta Smart card readers 6 Sound video and game controllers H Wy System devices El Universal Serial Bus controllers AAA AAA The Kodak 4200 or 4600 Scanner should be displayed under Imaging Devices 3 Click Action gt Scan for hardware changes False paper jams or multifeeds e Make sure that the transport area is clean are occurring 35 6 cm 14 in or longer documents Make
22. Kodak Scanner found to be defective or which does not conform to the product specifications will be repaired or replaced with new or refurbished product at Kodak s option Purchasers may determine the applicable Limited Warranty period for the Kodak Scanners purchased by calling 800 822 1414 or by visiting www Kodak com go disupport or by reviewing the Limited Warranty Summary Card enclosed with the Kodak Scanner Proof of purchase is required to demonstrate eligibility for warranty service Warranty exclusions Kodak s Limited Warranty does not apply to a Kodak Scanner that has been subjected to physical damage after purchase caused for example by casualty accident acts of God or transportation including a by a failure to properly package and ship the Scanner back to Kodak for warranty service in accordance with Kodak s then current Packaging and Shipping Guidelines including failure to replace the shipping restraint prior to shipping or by a failure to remove the shipping restraint prior to use b resulting from the user s installation system integration programming re installation of user operating systems or applications software systems engineering relocation reconstruction of data or removal of the product or any component including breakage of a connector cover glass pins or seal c from service modification or repair not performed by Kodak or a service provider authorized by Kodak or by tampering use of coun
23. ORTANT Do not overstretch the tire it may tear 7 Reinstall the separation roller Be sure to line up the slots on the separation roller with the holders 8 Lower the separation roller holder back in place Close the scanner cover Replacing the pre Change the pre separation pad when the frequency of multi fed documents separation pad increases 1 Open the scanner cover 2 Remove the pre separation pad by lifting the pad up and out of position NOTE The pre separation pad fits snuggly in place therefore a little force may be required to remove it 3 Install the new pre separation pad Be sure it snaps into place 4 Close the scanner cover A 61651 November 2012 5 15 Replacing the imaging The imaging guides should be replaced when they are heavily scratched and guides defects show in the image NOTE Handle the imaging guides carefully so as to not put fingerprints on the guides 1 Open the scanner cover 2 Loosen the screws on each end of the lower imaging guide and remove it from its position A E a 3 Install the new imaging guide and tighten the screws to secure the imaging guide 4 Repeat Steps 2 and 3 to replace the upper imaging guide 5 Close the scanner cover Replacing the Flippable In the rare case that you may need to replace the Flippable White Background White Background strip s strip s follow the procedures below 1 Open the scanner cover 2 Loosen the two screws on
24. ared to provide a description of the problem Response Center personnel will assist the end user in resolving the problem over the phone The end user may be asked to run some simple self diagnostic tests and report the resulting status and error code messages This will assist the Response Center in determining if the problem is the Kodak Scanner or another component and if the problem can be resolved over the phone If the Response Center determines a hardware problem exists that is covered either under the Limited Warranty or a purchased Maintenance Agreement a Return Material Authorization Number RMA will be assigned as needed a service request will be initiated and repair or replacement procedures will follow Packaging and shipping guidelines Purchaser must ship all warranty returns in a method that guarantees full protection of the product from shipping damage Failure to do so will void the Kodak Scanner warranty Kodak advises the purchaser to keep the original box and packing materials for storing or shipping Kodak is not responsible for issues related to shipping damage The purchaser must return only the Kodak Scanner Prior to shipment purchaser must remove and retain all add on items i e adapters cables software manuals etc Kodak accepts no responsibility for these items and they will not be returned with the repaired or replacement Kodak Scanner All products should be returned to Kodak in the original shipping container
25. ayed they can be cleared by pressing the Stop Pause bution 2 Adjust the input elevator to meet your scanning needs See the section entitled Adjusting the input elevator for more information 3 Adjust the output tray to meet your scanning needs See the section entitled Adjusting the output tray for more information 4 Select your scanning application The scanner comes with Smart Touch functionality and Kodak Capture Desktop Software A 61651 November 2012 3 1 Adjusting the input You can adjust the side guides and input elevator height to accommodate your elevator scanning needs When the scanner is not is use the input elevator can be folded up against the scanner NOTE The input elevator must be in the lowest position before closing it e Adjusting the side guides the side guides can be adjusted for right edge left edge or center feeding The side guides can be moved together for center feeding or independently for offset feeding right edge or left edge Before moving the side guides be sure the locking switch is not in the locked position see below NOTE When using the optional Enhanced Printer documents should be placed in the input elevator in a manner that will align the print string in the proper location Offset feeding may be required e Locking the side guides side guides may be locked into position after they are adjusted This may be helpful when the placement of a print string is
26. d lightweight paper from a paper weight range of 25 g m to 75 g m kg 7 to 20 lbs The Kodak Feeder Kit for Ultra Lightweight Paper includes a feed module and separation roller that are specially designed to feed light weight paper through the scanner transport Kodak A3 Flatbed Accessory the Kodak A3 Flatbed adds scanning capability for exception documents up to 11 x 17 inch A3 size paper to your Kodak 4000 Series Scanner CAT No 179 6747 Whats in the box Before you begin open the box and check the contents e Kodak i4200 or 14600 Scanner e Output tray e USB 2 0 cable e AC power cord bundles e Welcome Folio which includes Installation CD Application CDs Warranty Registration sheets Printed User s Guide English Printed Reference Guide multi languages Printed Installation Guide Sample Cleaning Kit Service amp Support Contact Information sheets Miscellaneous flyers 1 2 A 61651 November 2012 Scanner components Front view 1 Printer access cover lift this cover to access the feed module release knob and the optional Enhanced Printer for changing printer positions and maintenance The scanner serial number and K number are also located in this area Scanner cover provides access to the internal components 0 Output tray collects the scanned documents 4 Output tray side guides can be moved in and out to accommodate document size or folded flat on the output
27. dak A 61651 November 2012 B 3 Contacting Kodak For Information on Kodak Scanners Website www Kodak com go docimaging For U S Service Repair and Technical Assistance by Telephone Telephone technical support is available Monday Friday between the hours of 5 a m to 5 p m excluding Kodak holidays Phone 800 822 1414 For Technical Documentation and FA s available 24 hours a day Website www Kodak com go docimaging For Service Program Information Website www Kodak com Phone 800 822 1414 B 4 A 61651 November 2012 Eastman Kodak Company 343 State Street Rochester NY 14650 U S A Kodak 2012 All rights reserved TM Kodak
28. e provides a step by step procedure for installing the scanner e Scanner Setup Guides the TWAIN Datasource and ISIS Driver are included with the Kodak i4000 Series Scanner Each Scanner Setup Guide explains how to use basic image processing features and both guides are provided on the Installation CD in PDF format You can also download these guides from the website e Smart Touch User s Guide provides information and procedures on how to use Smart Touch functionality This guide is provided on the Installation CD in PDF format You can also download these guides from the website e Reference Guide provides easy visual steps for cleaning your scanner Keep this guide close to the scanner so you can use it as an easy reference Website www kodak com go docimaging A 61651 November 2012 1 1 Accessories Kodak Enhanced Printer Accessory the Kodak Enhanced Printer Accessory provides an effective way to apply information to the scanned document It operates at full scanner speed The printer can add a date time document sequential counter and custom messages All printer controls and functions are accessible through the TWAIN Datasource or ISIS Driver Document Extenders document extenders are available for scanning documents longer than 43 2 cm 17 inches These extenders are available in 66 04 cm 76 2 cm and 86 36 cm 26 30 and 34 inch lengths Kodak Feeder Kit for Ultra Lightweight Paper allows you to fee
29. e Kodak website at www kodak com go msds When accessing the MSDSs from the website you will be required to provide the catalog number of the consumable you want the Material Safety Data Sheet for See the section entitled Supplies and consumables later in this guide for supplies and catalog numbers Users and their employers need to observe the common sense precautions applicable to the operation of any machinery These include but are not limited to the following e Do not wear loose clothing unbuttoned sleeves etc e Do not wear loose jewelry bracelets bulky rings long necklaces etc e Hair length should be kept short using a hair net if needed or tying long hair up in a bundle e Remove all other loose objects from the area that could be drawn into the machine e Take sufficient breaks to maintain mental alertness e Use only the recommended cleaning supplies e Do not use canned compressed air Supervisors should review their employee practices and make compliance with these precautions a part of the job description for operation of the scanner or any mechanical device Warning labels A A CAUTION Moving parts avoid contact CAUTION Hot surface avoid contact Safety User Precautions e Place the scanner on a sturdy level work surface capable of supporting 38 8 kg 85 5 lbs and leave adequate clearance on all sides of the scanner e When relocating the scanner it is recommended that two people l
30. e the printer access cover and reinstall the output tray 4 8 A 61651 November 2012 Installing Replacing The two ink blotter strips which will be placed in the ink blotter channels at r stri installation are located in the scanner transport to collect ink overflow To the ink blotter st ps order additional ink blotter strips see the section entitled Supplies and Consumables in Chapter 5 1 Pull the scanner cover release latch forward to release and lift the scanner cover 2 Locate the two blotter strip channels These channels are where the blotter Strips will be installed or replaced 3 If you are replacing a blotter strip proceed with Step 4 if not go to Step 5 4 Grasp the blotter strip carefully pull it off of the channel and discard the soiled strip according to local regulations 5 Remove the backing from a new blotter strip 6 Align the blotter strip in one of the channels NOTE Improperly aligned blotter strips may cause document jams Press the adhesive side of the blotter strip down firmly into the channel Repeat Steps 4 7 for the other strip Close the scanner cover A 61651 November 2012 4 9 Problem solving Use the list below as a guide to check possible solutions to problems you may encounter when using the printer Print quality is poor or inconsistent Be sure the ink cartridge is not empty e Be sure the ink cartridge is properly installed e Be sure the ink cartridge is in
31. each end of the lower background strip and remove it from its position Disconnect the background strip connector Connect the new background strip connector with the cable Be sure it is securely in place 5 Install the new background strip and tighten both screws on each side to secure the background strip Repeat Steps 2 5 to replace the upper background strip Close the scanner cover 5 16 A 61651 November 2012 Supplies and Contact your scanner supplier to order supplies or go to consumables www scannerstore kodak com Supplies Consumables CAT No Kodak Feeder Consumables Kit 832 7538 Kodak Extra Large Feeder Consumables Kit 838 7938 Kodak Extra Extra Large Feeder Consumables Kit Series 146 2415 Scanners Kodak Imaging Guide Set without Enhanced Printer 834 8054 Kodak Imaging Guide Set with Enhanced Printer 871 4438 Kodak Flippable White Background without Enhanced Printer 808 8239 Kodak Flippable White Background with Enhanced Printer 800 0853 Kodak Digital Science Transport Cleaning Sheets qty 50 169 0783 Kodak Digital Science Roller Cleaning Pads qty 24 853 5981 Staticide Wipes for Kodak Scanners qty 144 896 5519 Kodak Printer Ink Blotters 840 5425 Enhanced Printer Black Ink Cartridge 818 3386 Enhanced Printer Red Ink Cartridge 159 6832 Accessories Part No 66 04 cm 26 in document extenders qty 1 per box 5E4754 76 2 cm 30 in document extenders qty 1 per box 9E3216 86 36 cm 34 in docu
32. eaning procedures Do not use air liquid or gas spray cleaners These cleaners displace dust dirt and debris to other locations within the scanner which may cause the scanner to malfunction e Material Safety Data Sheets MSDS for chemical products are available on the Kodak website at www kodak com go msds When accessing the MSDSs from the website you will be required to provide the catalog number of the consumable you want the Material Safety Data Sheet for See the section entitled Supplies and consumables later in this guide for supplies and catalog numbers Users and their employers need to observe the common sense precautions applicable to the operation of any machinery These include but are not limited to the following e Do not wear loose clothing unbuttoned sleeves etc e Do not wear loose jewelry bracelets bulky rings long necklaces etc e Hair length should be kept short using a hair net if needed or tying long hair up in a bundle e Remove all other loose objects from the area that could be drawn into the machine e Take sufficient breaks to maintain mental alertness e Use only the recommended cleaning supplies e Do not use canned compressed air Supervisors should review their employee practices and make compliance with these precautions a part of the job description for operation of the scanner or any mechanical device Warning labels A A CAUTION Moving parts avoid contact CAUTION Hot su
33. en 10 business days The repaired product will be shipped back two day express mail at no expense to the eligible purchaser Important restrictions Eligibility The Advance Exchange Program and the Depot Service are available to eligible purchasers in the fifty 50 United States and On Site Service is available in the contiguous forty eight 48 states and in certain areas of Alaska and Hawaii for products purchased from authorized distributors of Kodak The Kodak Scanner will be ineligible for any service under warranty if the product falls under any of Kodak s then current Warranty Exclusions including a purchaser s failure to return defective products to Kodak in compliance with Kodak s then current Packaging and Shipping Guidelines Persons are only considered eligible purchasers or end users if they originally purchased the Kodak Scanner for their own personal or business use and not for resale Consumables Consumables are items that wear out under normal use and must be replaced by the end user as needed Consumables supplies other expendable items and those items identified as being the user s responsibility in the User s Guide are not covered under the Limited Warranty If any of the above excluded parts or services are required they may be available through an authorized service provider at their hourly rates and at terms then in effect Any defective products or parts replaced by Kodak become the property of Ko
34. eplacement product The RMA number should be kept in the event that the status of the replacement product needs to be checked The eligible purchaser will be asked for the address where the replacement product is to be shipped The eligible purchaser will also be faxed packing and shipping instructions for the malfunctioning product The eligible purchaser will then receive a replacement product within 2 business days after the service call initiation and Kodak s receipt of the signed agreement The malfunctioning product must be received by Kodak within ten 10 days of the end user s receipt of the replacement product or the end user s credit card will be charged the list price of the replacement product Shipment of replacement Imaging Product will be made at Kodak s expense and choice of freight carrier Shipments not made under Kodak s directions and choice of freight carrier may void the Limited Warranty Before the product is returned to Kodak be sure to remove all options and accessories which include power cord documentation etc that are not covered by the Limited Warranty The box and packaging in which the replacement product was shipped must be used to return the malfunctioning product If the malfunctioning product is not returned in the box and packaging in which the replacement product was shipped the Limited Warranty may be voided The Return Material Authorization Number RMA must be clearly marked on the outside of the bo
35. es 1 2 3 Remove the wrapping from the Transport Cleaning Sheet Adjust the side guides to the widest position Place the transport cleaning sheet in the center of the input elevator in landscape orientation with the adhesive side up Remove the transport cleaning sheet from the output tray and place it in the center of the input elevator in landscape orientation with the adhesive side down and rescan NOTE When the transport sheet gets dirty and or loses its tackiness discard it and use a new one When finished running the transport cleaning sheet 1 2 Open the scanner cover Wipe the exposed side of the upper and lower imaging guides with a lint free cloth Close the scanner cover and scan a test image to ensure image quality A 61651 November 2012 Replacement This section provides procedures for replacing the following parts Use the list procedures below as a guideline for frequency of replacement e Feed module tires and separation roller tires tire life will vary depending upon paper types environment and cleanliness Nominal tire life is approximately 500 000 documents results will vary Degradation of feeder performance multiple feeds stoppages etc indicate a need to change tires Change all the tires on the feed module and separation roller at the same time Feed module and separation roller it is recommended that you install a new feed module and separation roller every 4th tire chan
36. etecting multifed documenis 8 Paper present sensor detects the presence of documents in the input elevator Documents must be covering this sensor in order for the scanner to begin scanning 1 6 A 61651 November 2012 Rear view 1 Rear document exit allows you to exit exception documents from the rear of the scanner 2 Rear document exit toggle toggle this switch to enable the straight through paper path option of the scanner allowing exception documents to be outputted through the rear document exit 3 USB ports connects the scanner to the PC and allows the connection of other peripheral devices Power port connects the power cord to the scanner Security lock port connects a security lock to the scanner You can purchase a standard security lock at an office supply store Refer to the instructions provided with the security lock for installation procedures A 61651 November 2012 1 7 2 Installation Contents Installing the SCANNED cecceccsessecescecescecessecesceceesecssateesesesvaserseservarentaneess 2 1 Installing the Kodak Driver Software oooWooWooW WWW 2 2 Attaching the output TV orina 2 3 Connecting the power cord and USB cahle oo oWooWoW oo 2 3 TUAN On Ine scaner daa 2 4 Tumino omte scanne essa ad 2 4 Installing the scanner This section provides detailed information supporting the Installation Guide that is provided with your scanner Follow these steps in t
37. from the feeder area e Open the scanner cover e Locate the jammed document s and remove it e Close the scanner cover and resume scanning Verify that the Document Management Maximum Length option on the Device General tab TWAIN Datasource or the Longest Document option on the Scanner tab ISIS Driver is set to longer than the longest document being scanned The default is 43 2 cm 17 inches Make sure that e the power cord is plugged in and the power is on e the power button has been pushed on and the green LED is lit e the scanner cover is completely closed e documents are making contact with the feed module and are covering the paper present sensor e the last document in the stack does not have black in the area covering the paper present sensor in the input elevator e documents meet specifications for size weight and type etc e for thicker documents toggle the gap release toggle switch during feeding e you check the feed module and separation roller for signs of wear and replace these parts if necessary You can also power the scanner down and power it up again Image quality is poor or has decreased Make sure that the scanner and imaging guides are clean Refer to Chapter 5 Maintenance A 61651 November 2012 6 1 Problem Possible Solution 0 is displayed in the function window after the scanner is powered on indicating the scanner is not communicating with the PC Try the following e
38. g characters are evident e a print test reveals inconsistent character quality e cleaning has not improved the overall print quality IMPORTANT Dispose the empty ink cartridge in accordance with all federal state and local laws 1 Remove the output tray NOTE If you do not want to remove the output tray you can lift the front of the output tray then lift the printer access cover and position the printer access cover behind the height adjustment tab A 61651 November 2012 4 3 3 If you are installing the ink cartridge for the first time push the connector on the printer cable firmly into the printer carrier NOTE If you are replacing an ink cartridge the printer cable will already be installed and you just need to remove the printer carrier from it s position and remove the empty ink cartridge 4 Open the ink cartridge package and remove the tab from the new ink cartridge 5 Lift the green tab on the printer carrier and slide the new ink cartridge in the printer carrier and close the tab NOTES e If the printer cable should become disconnected snap it back into position e Ink cartridge disposal consult the Hewlett Packard website for recycling printing supplies or disposing of the ink cartridges according to local regulations 4 4 A 61651 November 2012 6 Slide the printer carrier into the desired print position See the section entitled Changing print positions later in this chapter for
39. g is the recommended system configuration to run Kodak i4000 Series Scanners e PC Intel Core 2 duo 2 GHz per core e USB port 2 0 high speed e 2 GB RAM e Supported operating systems Microsoft Windows XP Home and Professional SP2 and higher Microsoft Windows XP Professional x64 Edition SP2 and higher Microsoft Windows Vista SP1 and higher Microsoft Windows Vista x64 Edition Microsoft Windows 7 Home and Professional Microsoft Windows 7 x64 Edition Home and Professional Microsoft Windows 8 32 bit and 64 bit Included Drivers e Windows operating systems TWAIN ISIS WIA A 2 A 61651 November 2012 Appendix B Warranty US and Canada only Congratulations on the purchase of a Kodak Scanner Kodak Scanners are designed to provide end users with the highest performance and reliability All Kodak Scanners are covered by the following Limited Warranty Limited Warranty for Kodak Scanners Eastman Kodak Company provides the following Limited Warranty on Kodak Scanners excluding spare parts and consumables distributed by Kodak or through Kodak s authorized distribution channels Kodak warrants that a Kodak Scanner from the time of sale through the Limited Warranty period applicable to the Product will be free of defects in materials or workmanship and will conform to the performance specifications applicable for the particular Kodak Scanner All Kodak Scanners are subject to the Warranty Exclusions described below A
40. ge Install a new feed module and separation roller at the same time e Pre separation pad it is recommended that you change the pre separation pad at least as often as you change the feed module separation roller tires Imaging guides replace when the imaging guides are heavily scratched and defects show in the image Replacing the feed module 1 Remove the output tray or feed module tires 2 Lift up and open the printer access cover NOTE If you do not want to remove the output tray you can lift the front of the output tray then lift the printer access cover and position the printer access cover behind the height adjustment tab A 61651 November 2012 5 11 3 Turn the feed module release knob and release the feed module AAA WA 4 Ifyou are just replacing the feed module go to Step 11 If you are replacing the tires proceed with Step 5 5 With one hand press the locking tabs one on each side while holding the lower housing with the other hand Pull the upper housing up and away from the rollers 6 Remove both core assemblies 7 Replace each tire by sliding the tire off the core 8 Install each new tire by gently pulling it over the core The tires do not need to be installed in any specific orientation IMPORTANT Do not overstretch the tire it may tear 9 Replace each core assembly in the lower feed module housing and align 5 12 A 61651 November 2012 the tabs on the u
41. he order they are provided to install your scanner NOTES e If you have already performed all of the steps in the Installation Guide skip this section e When positioning the scanner be sure to provide adequate clearance at the back of the scanner if you will be using the rear document exit For more information on the rear document exit see the section entitled Adjusting the output tray in Chapter 3 A 61651 November 2012 2 1 Installing the Kodak Driver Do not install the USB cable before installing the Kodak Driver Software Software Windows 1 Insert the Kodak i4000 Series Scanners Installation CD in the CD ROM operating systems drive The installation program starts automatically 2 Select Install Scanner Software KODAK 14000 Scanner Install Scanner Software NOTES e Ifthe CD does not start automatically open the My Computer icon on your desktop Double click the icon indicating your CD ROM drive then double click on setup exe e If the message Portions of this application are already installed is displayed click Yes to continue the installation process Any previously installed Kodak Scanner software that is shared with this scanner will be updated Click Next when the Welcome screen is displayed Click Agree after you have read and agreed with the terms of the Software License Agreement The installation will start and several progress screens will be displayed Click Finish when the ins
42. his knob to release the feed module from it s position for cleaning or replacing The arrow on the release knob should be pointing to the left when the feed module is engaged and right when the feed module is disengaged A 61651 November 2012 1 5 Inside view When you pull the scanner cover release latch forward the following internal components are visible 1 Separation module provides smooth document feeding and separation of various sizes thicknesses and textures of documents 2 Imaging guides keep imaging guides clean to obtain optimum image quality 3 Black White background using the application software this background can be changed to White or Black Under normal scanning conditions you would use the black background If you are scanning lightweight or thin paper with printing on one side you can use the white background to help eliminate bleed through in the final image See the User s Guide for Image Processing TWAIN Datasource ISIS Driver for more information Rollers provides smooth transport of documents through the scanner Feed module provides smooth document feeding and separation of various sizes thicknesses and textures of documents 6 Ink blotter channels and ink blotters the ink blotters which are placed in these channels collect ink residue from the optional Enhanced Printer Accessory 7 Sensors these three ultrasonic sensors cover the width of the paper path which aid in d
43. ift the scanner and use safe lifting techniques e Do not install the scanner in a location subject to dust humidity or steam This may cause electrical shock or a fire Only use the scanner indoors in a dry location e Make sure the electrical power outlet is located within 1 52 meters 5 feet of the scanner and is easily accessible e When disconnecting equipment from the electric socket be sure to grasp the plug not the cord e Be sure the power cord is securely plugged into the wall outlet Failure to do so may cause electrical shock or fire e Do not damage knot cut or modify the power cord or use a damaged power cord This may cause electrical shock or fire e The scanner requires a dedicated and properly grounded power outlet Do not use an extension cord or power strip with the scanner e Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency e Do not use the scanner if it becomes inordinately hot has a strange odor emits smoke or makes unfamiliar noises Immediately stop the scanner and disconnect the power cord from the power outlet Contact Kodak Service e Do not disassemble service or modify the scanner except as explained in the User s Guide e Do not move the scanner with the power cord and interface cable attached This may cause damage to the cord cable Remove the power cord from the wall outlet before moving or relocating the scanner e Follow the Kodak recommended cl
44. important To lock the side guides remove any documents from the input elevator and move the lock switch to the left the locked position 3 2 A 61651 November 2012 e Adjusting the height of the input elevator the input elevator can be set to accommodate stacks of 25 100 250 or 500 documenis of 20 Ib 75 g m bond paper Input elevator settings are made through your scanning application software i e TWAIN Datasource or ISIS Driver When the input elevator is set to 25 the input elevator will remain in the up position When set to 100 250 or 500 the input elevator will automatically raise to feed documents and lower after the last document in your stack has been fed e Adjusting the input elevator Document lengths up to 35 6 cm 14 inches no adjustments are required Document lengths from 35 6 to 43 2 cm 14 to 17 inches pull out the document extender Documents lengths more than 43 2 cm 17 inches if you are scanning documents longer than 43 2 cm 17 inches the scanner driver must be set to accommodate these long documents Be sure to verify that the Maximum Length option on the Device General tab TWAIN Datasource or the Longest Document option on the Scanner tab ISIS Driver is set to longer than the longest document being scanned NOTES e Operator assistance may be required for scanning documents greater than 43 2 cm 17 inches e It is recommended that you use a document
45. in scanning However the host computer may require several seconds to detect the scanner Falling bar when the scanner is waiting for an operator action a blue bar will step down in succession from top to bottom in the function window A 61651 November 2012 6 3 Indicators the following provides a listing of the 7 segment display and LED indicators 7 segment LED indicator Explanation display un Res neck re Imaging guides u ed nkoamndge missing us fros poceo Ow twee Oo Operation timeout USB cable has been disconnected while the scanner was running etc we Red Scannercoveropen U7 e Too much paper is in the input elevator e The feed module is not inserted properly UB Green flash Multifeed pause Bed Mutiteed stop Us Red Document jam or the paper path is blocked Red flash e Be sure all cables are connected properly e Turn power off and then on again If problem persists call Service Upgrading software Kodak frequently updates drivers and firmware to correct issues and add new features If you are having error codes Ex you should upgrade to the latest driver before contacting Service Go to www Kodak com go disupport access 14000 Software and Drivers and download the most recent upgrade Contacting Service 1 Visit www Kodak com go disupport to obtain the most current phone number for your country 2 When calling please have the following information ready e A description of your problem
46. ment extenders qty 1 per box 9E5277 Accessories CAT No Kodak Feeder Kit for Ultralightweight Paper 844 5280 Enhanced Printer Accessory 809 6943 Kodak A3 Flatbed 179 6747 NOTE Items and catalog numbers are subject to change For the most up to date list of supplies and consumables go to www kodak com go scannersupplies These parts must be ordered from Parts Services In the United States call 1 800 431 7278 A 61651 November 2012 5 17 6 Troubleshooting Contents Problem solving Problem SOMIAO iban Ka ak an Nk 6 1 Indicator lights and error codes oooWooWo mona 6 3 Upgrading SO MW erste A asta 6 4 Contacting DS ICO cra 6 4 Use the chart below as a guide to check possible solutions to problems you may encounter when using the Kodak 4000 Series Scanner Problem Documents are jamming or multiple documents are feeding U9 document jam is being displayed in the function window and paper is stopping in the transport but is not jamming The scanner will not scan feed documents Possible Solution Make sure that e all documents meet specifications for size weight and type etc as outlined in Appendix A Specifications e all staples and paper clips have been removed from the documents e all rollers and tires are clean and the separation roller and feed module are properly installed See the procedures in Chapter 5 Maintenance To remove a document jam e Remove any documents
47. oughly vacuum the output tray area and the input elevator area Cleaning the rollers Cleaning the rollers includes all of the rollers in the transport area the separation roller tires and the feed module tires 1 Open the scanner cover 2 Manually rotate and wipe the rollers with a roller cleaning pad 3 Dry the rollers with a lint free cloth 5 4 A 61651 November 2012 Cleaning the separation 4 Pull the separation pad holder forward and remove the separation roller roller tires NOTE The separation roller cover is spring loaded Hold the separation roller cover back until you remove the separation roller then gently lower the roller cover back in place wwe o 5 Manually rotate and wipe the separation roller tires with a roller cleaning pad For best results wipe parallel to the ribs in order to remove any residue between the ribs 6 Inspect the tires If the tires show signs of wear or damage replace the separation roller See Replacement procedures later in this chapter 7 Reinstall the separation roller by aligning the slots on the separation roller with the holders A 61651 November 2012 Cleaning the feed module 8 Clean the feed module tires by manually rotating and wiping the feed tires module tires with a roller cleaning pad For best results wipe parallel to the ribs in order to remove any residue between the ribs You do not need to remove the feed module to clean the tires bs 19 CN
48. port and are jamming U9 is being displayed in the function window e documents are fragile and you do not want to bend them e output stacking order is not important e scanning directly into the recycle bin when documents are no longer needed after scanning e scanning photographs NOTES e Be sure to toggle the rear document exit switch back into it s original position when finished e Be sure that you have adequate clearance behind the scanner to feed the document s through when using this option e When scanning several documents through the rear document exit the documents will be outputted in the reverse scanning order Getting your 1 Standard paper size documents feed easily through the scanner When documents ready to organizing your documents for scanning stack the documents so the lead edges are aligned and centered in the input elevator This allows the scan feeder to introduce documents into the scanner one at a time 2 Remove all staples and paper clips before scanning Staples and paper clips on documents may damage the scanner and documents 3 All inks and correction fluids on the paper must be dry before scanning is started 4 Torn damaged or crushed pages can be transported successfully through the scanner However no scanner can transport every possible type of damaged paper If in doubt about whether a specific damaged document can be transported through the scanner place the document in a clear pro
49. pper housing with the slots on the lower housing 10 Press the upper and lower housings together until they snap into place 11 Insert the pin on the left side of the feed module with the rod 1 align the upper tab with the slot 2 align the pin on the right side of the feed module with the rod 3 and turn the green feed module release knob 4 to re engage the feed module Verify that the feed module is securely in place and moves freely after you install it 12 Close the scanner cover and the printer access cover 13 Reinstall the output tray A 61651 November 2012 5 13 Replacing the separation 1 Open the scanner cover a or separation roller 2 Pull the separation roller cover forward and remove the separation roller ires i ta 2 mad NOTE The separation roller cover is spring loaded Hold the separation roller cover back until you remove the separation roller then gently lower the roller cover back in place If you want to replace the separation roller do Steps 3 and 4 If you want to replace the separation roller tires go to Step 5 3 Insert the new separation roller Be sure to line up the slots on the separation roller with the holders 4 Release the separation roller cover back in place and close the scanner cover 5 14 A 61651 November 2012 To replace the tires 5 Replace each tire by sliding the tire off the core 6 Install each new tire by gently pulling it over the core IMP
50. ral Debug Logs Tests Scanner Count only Ik Printer M Scanner Time Actual GMT Q 9 30 2009 24650 PM Corresponding local time 9 90 2009 24650 RM Calibrate 9 Check the Printer check box and click Done 10 Scan the blank sheet of paper that is in the input elevator 11 Check the quality of the test pattern If the test pattern is inconsistent you may need to clean the print head or change the ink cartridge Acceptable Unacceptable pattern is inconsistent NOTE Clean the print head by removing it from the printer carrier and dabbing the print head with a damp cloth A 61651 November 2012 4 7 Changing print The horizontal print position must be changed manually positions 1 Remove the output tray 2 Open the printer access cover NOTES e The horizontal print positions are visible by a small detent on the printer rail e Printing automatically stops approximately 1 27 cm Ve inch from the trailing edge of the document even if the information has not been completely printed Lift up on the printer carrier and remove it from it s position 4 Align the slot on the printer carrier with the desired horizontal print position and slide the printer carrier in place NOTE The print location indicators at the edge of the input elevator can be used as a guide to verify your horizontal print position AA AAN ANSIA Indicators 5 Clos
51. rface avoid contact Environmental information e The Kodak i4000 Series Scanners are designed to meet worldwide environmental requirements e Guidelines are available for the disposal of consumable items that are replaced during maintenance or service follow local regulations or contact Kodak locally for more information e Disposal of this equipment may be regulated due to environmental considerations For disposal or recycling information contact your local authorities or in the USA visit www kodak com go scannerrecycling e The product packaging is recyclable e Kodak i4000 Series Scanners are Energy Star compliant and shipped from the factory with the default time set to 15 minutes European Union This symbol indicates that when the last user wishes to discard this product it must be sent to appropriate facilities for recovery and recycling Please contact your local Kodak representative or refer to www kodak com go recycle for additional information on the collection and recovery programs available for this product Please consult www kodak com go REACH for information about the presence of substances included on the candidate list according to article 59 1 of Regulation EC No 1907 2006 REACH Acoustic emission Maschinenlarminformationsverordnung 3 GSGV Der arbeitsplatzbezogene Emissionswert betragt 70 dB A Machine Noise Information Ordinance 3 GSGV The operator position noise emission value is 70 dB A
52. s slide the guides in or out to accommodate the document size you want to scan Side guides can be left center and right adjusted to accommodate documents of various widths The side guides can also be locked into position if desired 14 13 Input Elevator holds up to 500 documents 20 lb 75 g m in place The input elevator can be set to accommodate stacks of 25 100 250 or 500 documents The input elevator can be folded up when it is not in use Input Elevator extender pull this extender out to accommodate documents longer than 35 6 cm 14 inches Print location indicators there are detents at the edge of the input elevator to indicate where the print positioning will be on the paper Gap release toggle switch push in to adjust the space between the feed module and separation module for documents that require special handling 1 4 A 61651 November 2012 Printer access view Even if you do not have the Kodak Enhanced Printer Accessory you will still need to access this area of the scanner The feed module release knob is located in this area 1 Printer cable this cable connects directly to the printer carrier to allow communication to the Enhanced Printer 2 Enhanced Printer carrier cartridge allows front printing on documents This is only present if the Enhanced Printer Accessory is installed Print positions 8 print positions are available Feed module release knob turn t
53. sure the input elevator and output tray extenders are pulled out to are not feeding or are jamming provide support for long documents or use the optional document extenders Also see problem U9 document jam on page 6 1 Scanner is running slow Your PC may not meet the minimum requirements for the scanner e Some image processing functions will reduce scanner speed e Resolution dpi setting may be set too high e Your virus software may be scanning all TIFF or JPEG files e Ensure you are scanning to a local drive Make sure that e the input elevator side guides are adjusted to fit the documents being fed e documents are being fed perpendicular to the feed module e all staples and paper clips have been removed from the documents e the feed module separation roller and drive rollers are clean e the scanner cover is firmly closed Make sure that Documents are skewed during scanning scanner pauses excessively during scanning e the host computer meets minimum requirements for scanning e there is enough free space on the hard disk drive e all other applications are closed e you are using a USB 2 0 connection You can also try changing the scanning options compression etc in your scanning application 6 2 A 61651 November 2012 Problem Possible Solution Roller marks or streaks appear on Clean the feed module separation roller and tires Refer to Chapter 5 documents after scanning Maintenance
54. tallation is complete Remove the Installation CD from the CD ROM drive 2 2 A 61651 November 2012 Attaching the output tray When you unpack the Kodak i4000 Series Scanner the output tray is packed in a separate box e Locate the output tray slots on the scanner align the output tray with the slots and set the output tray in place Connecting the power cord When the drivers have been installed connect the power cord and USB cable and USB cable to the scanner Refer to the illustration below for making proper connections Make sure the power outlet is located within 1 52 meters 5 feet of the scanner and is easily accessible 1 Select the appropriate AC power cord for your region from the supply of power cords packed with your scanner 2 Plug the output power cord into the power port on the scanner Be sure it is securely attached Plug the other end of the power cord into the wall outlet Attach the USB cable to the scanner USB port Attach the other end of the USB cable to the proper USB port on your PC A 61651 November 2012 2 3 6 Secure the power cord and USB cable into the cable routing channel on the back of the scanner Turning on the e Press the Power button scanner When you turn on the scanner the input elevator will open if it is not already opened and the green indicator on the Start Resume button will flash as the scanner goes through a series of self tests The scanner takes less than
55. tective sleeve and use the rear document exit Sleeves should be manually fed one at a time folded edge first using the gap release toggle switch NOTE The optional Kodak A3 Flatbed Accessory can also be used for scanning fragile documents 5 Place the documents you want to scan in the input elevator If you are scanning one sided documents be sure the side you want to scan is facing the input elevator NOTES e Some very thick and or stiff documents such as shipping envelopes may require the following Use of the rear document exit Use of the gap release toggle switch Removal of the pre separation pad Scanning at 300 dpi or more to reduce the scanner transport speed 3 6 A 61651 November 2012 Selecting your Kodak has included two scanning applications with your scanner scanning application e Smart Touch Kodak provides Smart Touch functionality which allows you to quickly and easily perform common scanning tasks such as scan and share incoming client correspondence with a co worker in a branch office create a searchable PDF of a printed report scan text to be included in documentation Nine predefined task shortcuts are available for your use You can modify and rename any of the shortcuts to create your own custom tasks You can also preview and easily edit images zoom pan rotate crop etc before they are sent to their destination For more information about Smart Touch see the User
56. terfeit or other non Kodak components assemblies accessories or modules d by misuse unreasonable handling or maintenance mistreatment operator error failure to provide proper supervision or maintenance including use of cleaning products or other accessories not approved by Kodak or use in contravention of recommended procedures or specifications e by environmental conditions Such as excessive heat or other unsuitable physical operating environment corrosion staining electrical work external to the product or failure to provide electro static discharge ESD protection f by failure to install firmware updates or releases available for the product and g by such other supplemental exclusions published from time to time online at www Kodak com go disupport or by calling 800 822 1414 Kodak provides no Limited Warranty for products purchased from countries other than the United States Purchasers of products from foreign distribution channels must seek warranty coverage if any through the original source of purchase Kodak provides no Limited Warranty for products that are purchased as part of a third party manufacturer s product computer system or other electronic device Any warranty for these products is provided by the OEM Original Equipment Manufacturer as part of that manufacturer s product or system The replacement product assumes the remainder of the Limited Warranty period applicable to the defective product or thirt
57. th a job setup that has Printing enabled and you do not have an Enhanced Printer installed a U2 error will be displayed A 61651 November 2012 4 1 Printer specifications More information about the following specifications can be found in the TWAIN Datasource or ISIS Driver Scanning Setup Guide Maximum characters Print locations horizontal Print locations vertical Print orientation Minimum printing distance from document lead edge Ink cartridge Characters per ink cartridge Static fields available Dynamic fields available Languages supported Normal Bold and Extra Bold NOTE Not all languages can support a Bold font based on the complexity of the characters such as half width Katakana Front pre scan 0 89 cm 0 35 in Black HP C6602A Red HP C6602R Up to 1 500 000 to 2 000 000 based on font size used User specified messages via capture software application Up to a nine digit sequential document number date four digit time Any phonetic language For example Dutch English French German Italian Portuguese Spanish Japanese half width Katakana 4 2 A 61651 November 2012 Installing Replacing You must install the ink cartridge before using the printer Refer to the section the ink cartridge entitled Supplies and consumables in Chapter 5 for ordering information After initial installation replace the ink cartridge when e printed characters appear light or uneven e missin
58. th the LEDs as contact could cause damage Do not insert any objects into the area between the upper LED strips as you may damage the reflective mirrors in the scan module on the illumination system PN 1 EY j j 1 Witten 3 i 4 yal WA RN MA y x 1 Clean both the top and bottom of the imaging guide thoroughly with a Staticide wipe Wipe the imaging guide again with an almost dry Staticide wipe to remove any streaks Reinstall the upper imaging guide A 61651 November 2012 Lower imaging guide 7 Turn the screw to the left on each end of the lower imaging guide and remove it from its position Set the imaging guide aside 8 Carefully vacuum the area between the LEDs IMPORTANT Avoid contact with the LEDs as contact could cause damage Do not insert any objects into the area between the upper LED strips as you may damage the reflective mirrors in the scan module on the illumination system 9 Clean both the top and bottom of the lower imaging guide thoroughly with a Staticide wipe 10 Wipe the imaging guide again with an almost dry Staticide wipe to remove any streaks 11 Reinstall the lower imaging guide 12 Close the scanner cover 13 When finished with all cleaning procedures turn on the scanner A 61651 November 2012 5 9 Running a transport cleaning sheet Final cleaning steps The transport should be cleaned with a Transport Cleaning Sheet fed several tim
59. the correct position for printing e Verify that the printer has been enabled in the scanning application and that the expected print string has been specified e Verify that all printer connectors are securely fastened and that the printer cable is securely attached e Run a print test to verify that all jets are functioning properly See the section entitled Running a print test earlier in this chapter e Clean the print head see Printing problems when starting up due to dry print head below Printing problems when starting up Remove the ink cartridge from the scanner and using a damp cloth or due to dry print head swab dab do not wipe the ink jets on the ink cartridge replace the ink cartridge and try again Not printing e Be sure that printing is enabled in the scanning application e Check to be sure that the ink cartridge is secure in the desired print position e Be sure the tape is removed from the print head U2 is displayed in the function e Print cartridge is not installed window when trying to print 4 10 A 61651 November 2012 5 Maintenance Contents Cleaning frequency Chart oooooo ooooooooooo oo Woo oom 5 2 Cleaning tools ana Materai oa 5 2 Opening the scanner COVES o o Wo maa 5 2 cleaning procedure aa ANA IN 5 3 Vacuuming the output tray and input elevatOr ooooWoW Wo 5 4 Cleaning the roller iii 5 4 Cleaning the separation roller tires oooooWo
60. tment procedures e Adjusting the angle of the output tray it is strongly recommended that you scan documents with the angle of the output tray in the up position to achieve best stacking performance Just lift the front of the output tray and the height adjustment tab will release from underneath the output tray To lower the output tray gently push the height adjustment tab underneath the output tray while lowering the output tray on the printer access cover 3 4 A 61651 November 2012 e Adjusting the side guides open and adjust the side guides on the output tray to match the position of the side guides on the input elevator The side guides can also be folded flat against the output tray e Adjusting the document stop adjust the output tray document stop to slightly longer than the longest document being fed If you are scanning documents longer than the output tray will accommodate fold the document stop flat on the output tray e Opening the rear document exit documents that require special handling i e fragile documents shipping envelopes etc can be outputted using the rear document exit This exit provides the straight through paper path option that allows an exception document s to pass through the transport thus reducing the possibility of a document jam A 61651 November 2012 3 5 Use the rear document exit when e documents are too stiff e g rigid to make the turn in the trans
61. x to ensure proper receipt and credit of the defective product Depot service lf the Kodak Scanner is not eligible for Advance Exchange or On Site Service an eligible purchaser may utilize our Depot Repair Service The eligible purchaser will be instructed to ship the product to the nearest authorized Depot Repair Center Product must be shipped at the eligible purchaser s risk and expense to the repair center Before the product is returned to the repair center be sure to remove all options and accessories which include power cord documentation etc not covered by the Limited Warranty All products should be returned to Kodak in the original shipping container or in a recommended packing box The Kodak Scanner must have the shipping restraint installed before it is shipped When the original packaging is not available contact Kodak s Response Center at 800 822 1414 for ordering information Eligible purchasers seeking services for Kodak Scanners must obtain a Return Material Authorization number RMA by calling 800 822 1414 and within ten 10 business days from the date of issuance of the RMA must return the Kodak Scanner to the address designated in the RMA at the end user s own expense and risk The Return Material Authorization Number RMA must be clearly marked on the outside of the box to ensure proper receipt and credit of the defective product Upon receipt of the product the repair center will repair product within t
62. y 30 days whichever is longer Installation Warning and Disclaimer KODAK WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE SALE INSTALLATION USE SERVICING OR IMPROPER FUNCTIONING OF THIS PRODUCT REGARDLESS OF THE CAUSE SUCH DAMAGES FOR WHICH KODAK WILL NOT BE RESPONSIBLE INCLUDE BUT ARE NOT LIMITED TO LOSS OF REVENUE OR PROFIT LOSS OF DATA DOWNTIME COSTS LOSS OF USE OF THE PRODUCT COST OF ANY SUBSTITUTE PRODUCT FACILITIES OR SERVICES OR CLAIMS OF CUSTOMERS FOR SUCH DAMAGES If there is any conflict between other sections of this appendix and the Limited Warranty the terms of the Limited Warranty prevail A 61651 November 2012 B 1 How to obtain Limited Warranty service Kodak Scanners are supplied with information on unpacking setup installation and operation Careful reading of the User s Guide will answer most of the technical questions the end user might have regarding proper installation operation and maintenance of the product However should additional technical support be required you may visit our website at www Kodak com go disupport or contact Kodak s Response Center 800 822 1414 The Response Center is available Monday Friday excluding Kodak holidays 8 a m to 5 p m EST Before placing the call the eligible purchaser should have the Kodak Scanner model number part number serial number and proof of purchase available The eligible purchaser should also be prep

A-61651, User's Guide for the Kodak i4000 Series Scanners

Contents

Download Pdf Manuals

Related Search

Related Contents