00 (with white LED Flashlight)Thermometer Operating Instructions
Contents
1. 5020 0490 with white LED Flashlight Thermometer Operating Instructions For Model with thermocouple socket A CAUTION The thermometer is a non contact infrared thermometer There are many mathematical modes for the Infrared function Please ieee arene mil WEEN CREECH T e TWO LASER BEAMS PERMANENT EYE DAMAGE MAY RESULT remember to keep away from children and don t use it for safety related applications P y y PP 3 NEVER POINT THE DEVICE TOWARDS ANYONE S EYES 4 KEEP OUT OF REACH OF ALL CHILDREN STORAGE amp CLEANING The thermometer should be stored at room temperature between 20 to 65 C 4 149 F Laser The sensor lens is the most delicate part of the thermometer The lens should be kept clean at all times care should be taken when cleaning the lens using only a soft cloth or cotton swab with water or medical alcohol Allowing the lens to fully dry before using the thermometer Do not G Thermocouple Socket LCD a iiaa ay Up Key submerge any part of the thermometer LCD ERROR MESSAGES pown key lt a Infrared Lens The thermometer incorporates visual diagnostic messages as follows 5 Mode Key A 3 Sw fl LOCK c Emas Koy J Hi or Lo is displayed when the temperature being measured is outside of the settings of HAL and LAL nf a kg LOW 109 O ie Z r Er2 is displayed when the thermometer is exposed to rapid changes in the ambient temperature Er3 E n2. aced measurements are still possible possible ZX When the Low Battery icon indicates the battery is low the battery should be replaced immediately with AAA 1 5V batteries Please note It is important to turn the instrument off before replacing the battery otherwise the thermometer may malfunction Dispose of used battery promptly and keep away from children SPECIFICATION eee Tamb 25 C 1 of reading or 1 C 1 8 F whichever is Accuracy greater Test under Tamb 23 6 C Tobj 33 1000 C Tamb 2343 C Emissivity Range 0 95 default adjustable 0 1 to 1 step 01 Resolution 9 9 199 9 C 0 1 C 0 1 F Press Mode key 5 for the Maximum MAX Minimum MIN Different between MAX and MIN DIF and Average AVG modes During the measurement the special modes reading will be displayed beside the mode icon Press Up key 4 or Down key 2 key to change the High Alarm HAL or Lo Alarm LAL then press Meas key 6 to confirm it For example When the reading 26 9 C lt LAL 27 C the Low icon will flash and you will hear a beep sound Connect the thermocouple with Thermocouple socket 0 11 and put the probe in on the target the thermometer will display the temperature automatically without pressing any button To see the minimum or maximum data during the probe measurement please hold down the Up key 4 or Down key 2 2 of reading or 2 C 4 F whichever is greater A After measure hig
3. gg T a 07 7 is displayed when the ambient temperature exceeds 0 C 32 F or 50 C 122 F The thermometer i u J E should be allowed plenty of time minimum 30 minutes to stabilize to the working room temperature Error 5 9 for all other error messages it is necessary to reset the thermometer To reset it wait for auto power Default Screen r off remove the battery and wait for a minimum of one minute reinsert the battery and turn on If the error Simply aim the thermometer at the measure target with Lens 8 and press Meas key to a J message remains please contact the Service Department for further assistance display the surface temperature The Distance Spot is 50 1 The two laser points are the reference for the target spot size Please make sure the target area is within the field of view n H E E Hi or Lo is displayed when the temperature being measured is outside of the measurement range F F FUNCTION BATTERIES Press Emissivity key C 1 for setting the emissivity The thermometer incorporates visual low battery indication as follows n NILE Press Emissivity key C then press Up key 4 or Down key 2 to set the emissivity then press Mode muh m C_ key 5 to confirm it The emissivity can be changed from 0 10 10E to 1 100E ZIEN Battery OK measurements Battery Low battery needs to be Battery Exhausted measurements are not are possible repl
4. h temp the probe may remain HOT for a while Response Time 90 The thermometer will automatically shut off if left idle for more than 60sec ADD VALUE Distance Spot Press Up key 4 for LOCK mode ON OFF The lock mode is particularly useful for continuous Battery Life Typ 180 min 140 hours continuous use Alkaline without Laser and Back Light In MAX MIN DIF AVG monitoring of temperatures for up to 60 minutes Dimensions 47 0 x 197 0 x 203 3mm 1 8x7 7x8 0 inch mode Weight 386 1 grams 13 62 oz including batteries AAA 2pcs Note Under the electromagnetic field of 3V m from 200 to 600 MHz the maximum error is 10 C 18 F A EMC RFI Readings may be affected if the unit is operated within radio frequency electromagnetic field strength of approximately 3 volts per Press Down key 2 for C or F transferred In all modes First and press Up key 4 for backlight function ON OFF Se hold on the Meas key and press Down key 2 for laser function ON OFF iN meter but the performance of the instrument will not be permanently affected With flash light be turned on in the same time as laser Ref No 012007
Download Pdf Manuals
Related Search