ClosetMaid 52853 Instructions / Assembly
Contents
1. NICLOSETMAD IS ShelfTrack Installation Tips 1 Use the Correct Hardware Select the hardware that is right for your wall type p Studs Securetothewallwith 12 x 2 in pan head screws at stud locations Concrete Drill 1 4 in holes insert 12 wall anchors and securetothewallwith 12 x 2 in pan head screws Drywall Drill 1 2 in holes and secure to the wall with toggle bolts 2 Hang Track Location Track can be installed at any height However for maximum adjustability and strongest installation install track flush to ceiling and screw into wood header behind wallboard Stud installation is recommended whenever possible for the strongest installation 3 Determine Length and Spacing of Standards Standards are available in several lengths depending on the number of shelves you want and the spacing between the shelves The closer the standards are placed together the stronger the installation Standards should be spaced no more than 24 in apart and no more than 4 in from the end of the shelf ClosetMaid com 1 800 874 0008 05 13 SHELFITRACK witSUPERSL DE Choose Your Hardware Hang Track EJ Standard Bracket D Closet Rod Closet Rod Support Closet Rod Cap Shelf End Cap 4 Securing Standards Each standard must be secured to the wall with one screw at the closest hole to the center of the standards When using toggle bo2. lts remove toggle put bolt through standard and re attach T u I U n 5 Attaching Brackets Attach brackets at desired shelf height NOTE Always match bracket size to shelving depth except when using Shelf amp Rod shelving Always use 12 in brackets for this type of shelving When installing 16 in SuperSlide with Closet Rod amp Support always use 12 in brackets 6 Cutting Shelving Closet Rods and Hang Tracks Wire shelving can be cut using a bolt cutter or hacksaw Closet rods can be cut using a pipe cutter recommended or a hacksaw Hang tracks can be cut with a hacksaw 7 Corners When two shelves com together in a corner use a corner shelf support to connect them Use a corner closet rod to allow clothes to slide uninterrupted around corners NOTE SuperSlide Closet rod supports should be placed where closet rods join 8 Shelf caps Closet Rod Caps Shelf caps should be placed on the cut ends of the shelving to protect clothing Closet rod caps should be placed on the ends of closet rods to keep hangers in place EMERSON 4
Download Pdf Manuals
Related Search