LockState LS-WS1415 Use and Care Manual
Contents
1. LOGAS TATE LS WS1415 OPERATING INSTRUCTIONS CAUTION Do not keep the keys in the safe Store in another secure location 1 OPENING THE SAFE To open the safe for the first time remove the small plastic cover B see diagram 1 on the front panel Insert the key into the key hole and turn it counter clockwise At the same time turn the doorknob A see diagram 1 clockwise to open the safe A B Diagram 1 2 INSTALLING THE BATTERIES The safe requires 4xsize AA 1 5V batteries To install batteries open the safe remove the battery cover plate D see diagram 2 on the back of the door Ensure the batteries are aligned with the correct polarity Use of alkaline batteries is recommended 3 PROGRAMMING THE CODE With the safe door open press the red button C see diagram 2 on the back of the door near the hinge Release it and you will hear two beeps The yellow light near the keypad should illuminate Now enter a 3 to 8 digit code that you wish to use as a combination and confirm by pressing the letter A or B within 15 seconds The safe will beep twice and the yellow light will turn off Your personal code is now Set Write down your new combination immediately and test your new combination gt U 4 USING YOUR SAFE To open the safe enter your personal code followed by the letter A or B You will hear a beep and the green light will turn on Th2. en turn the doorknob clockwise to open the door within 5 seconds lf the incorrect combination is used 3 times consecutively you must wait for 20 seconds before reattempting lf again the incorrect combination is entered 3 times you must wait approximately 5 minutes before reattempting access 5 BATTERY REPLACEMENT WARNING lf the batteries are low the red light in the middle of the number panel will warn you immediately after entering your personal code To test the batteries input your personal code to open the door If the batteries are low the red light will appear Replace batteries as soon as possible Note You must reprogram your code using step 3 above after batteries are replaced 6 OVERRIDE INSTRUCTIONS TO OPEN THE SAFE For your convenience we have engineered a manual override system for your safe If you forget or misplace your combination remove the small central plate on the front panel B see in diagram 1 Insert the key into the keyhole and turn it in a counter clockwise direction and then turn the knob A see in diagram 1 clockwise towards the right This will manually open your safe at any time Diagram 2
Download Pdf Manuals
Related Search