ProCom PF06-YJLF-B Installation Guide
Contents
1. Installing Blower Accessory PRO COM Fan Blower Accessory Model PFO6 YJLF A B Step1 Disconnecting Wall Mounted Heater Wall mounted heater must be disconnected from gas supply and removed from wall before installing fan accessory Contact a qualified service person to do this Follow all codes Step2 Removing Knock out panel from back of heater Removing the Knock out panel at the four tabs with a Philips head screwdriver see Figure 1 Step3 Attaching Fan Blower Assembly Attaching Fan Blower to the rear panel of the heater using the four screws provided see Figure 2 Step4 Fan operation To operate the Manual unit turn on off switch to the on ic sick position To operate the Automatic unit turn AUTO O MAN ara an Figure 2 to the desired position Man position will remain constantly on Auto position will be controlled by the sensor no fan blower unit Sensor will be activated when the temperature of sensor head reach 4045C after the heater was started To stop the operation turn unit switch to the O Figure 3 position see Figure 3 Step5 Grounding And Extension Cord Use this Fan Blower accessory must be grounded This unit comes with a 3 plong grounding plug for your protection against electrical shock Use standard 3 holes grounded outlet If an extension cord is needed it must have a 3 plong plug and a 3 hole Grounded receptacle An undersized cord will cause outst a drop in live voltage and could result in l2. oss of power and overheating see Figure 4 Grounded plug Figure 4 Knock out pane Figure 1
Download Pdf Manuals
Related Search