Active Ventilation UV-60-BL Installation Guide
Contents
1. 1 foot up from the bottom edge of roof underneath the Dormer Vent as indicated View 3 Center Universal Vent over the slot with the top flange under View 4 Completed installation should look like this the first row of shingles the bottom on top of enm T2. ACTIVE io ro VENTILATION ag Over 50 of our PRODUCTS INC r pg PfRCES Use 845 565 7770 Fax 845 562 8963 www roofvents com roofvent aol com UV 48 Universal Vent Installation Instructions To properly install this Universal Dormer Vent please follow these instructions 1 When used as a Roof Exhaust Vent cut a 1 5 x 46 slot just below the first row of shingles using the following chart See View 1 When used as a Roof Intake Vent cut the slot 1 foot up from the bottom edge of the roof from there installation instructions are the same Please note if more than one Universal Vent is being installed then the VENTS not the slots must be spaced 4 inches apart when installed to allow for roof water drainage 2 Apply sealant under the top flange and along the side edges See View 2 Then place the top flange under the shingles placing it so that the slot is centered under the Universal Vent Be sure the Vent is correctly aligned with the slot before continuing See View 3 3 When the Universal Vent is in its final position the bottom flange should rest on top of the shin gles to ensure correct drainage Do not use sealant on the bottom flange See View 2 4 Attach the Universal Vent to the roof using 8 x 1 screws on the bottom flange 6 apart See View 4 View 1 Cut a slot below the bottom edge of the first row of shingles for exhaust View 2 Put sealant across the top flange For intake cut slot
Download Pdf Manuals
Related Search