Home Decorators Collection 2311600310 Instructions / Assembly
Contents
1. DECORATORS COLLECTION INV 23116 SK17954Er1 a AVERY SINGLE BIN MOBILE CART 28 Hx13 Wx12 D ASSEMBLY INSTRUCTIONS Made In China 1 14 Thank you for purchasing this quality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged please contact our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly DRAWER DRAWER FRONT PANEL 3PCS LEFT SIDE PANEL 3PCS RIGHT SIDE PANEL 3PCS DRAWER DRAWER BACK PANEL 3PCS BOTTOM PANEL 3PCS 2 14 LOCK BOLT 16PCS CAM LOCK 16PCS LONG SHORT PLASTIC COVER 4PCS PLASTIC COVER 6PCS ROUND HEAD SCREW 16PCS 1 FLAT 5 8 FLAT HEAD SCREW 12PCS HEAD SCREW 16PCS UNIVERSAL WHEEL 1 2PCS UNIVERSAL WHEEL 2 2PCS NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 3 14 HOW TO SEPARATE GLIDES PRIOR TO ASSEMBLY WE SUGGEST SEPARATING THE INNER GLIDES FROM THE OUTER GLIDES SIMPLY PULL THE LEFT RIGHT INNER GLIDES FROM THE OUTER GLIDES EXPOSING A SMALL BLACK SAFETY RELEASE TAB BY PUSHING THE SAFETY RELEASE TAB YOU WILL BE ABL2. E TO SEPARATE THE GLIDES a NOTE UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO THE FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT LEAST TWO PEOPLE NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE SURFACE OF THE PART HOW TO USE THE CAM TOOL NOTE e THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS INSTALL THE WOOD DOWEL AND THE CAM LOCK BOLT b INTO THE LEFT SIDE PANEL e JOIN THE FRONT FIXED PANEL D TO THE LEFT SIDE PANEL B BY USING WOOD DOWEL a FIRST e TIGHTEN THE CAM LOCK BOLT b WITH THE CAM LOCK c FROM PRE DRILLED HOLES 64 INSTALL THE WOOD DOWEL AND THE CAM LOCK BOLT b INTO THE RIGHT SIDE PANEL e JOIN THE FRONT FIXED PANEL D TO THE RIGHT SIDE PANEL C BY USING WOOD DOWEL a FIRST e TIGHTEN THE CAM LOCK BOLT b WITH THE CAM LOCK c FROM PRE DRILLED HOLES 7 714 JOIN THE UNIVERSAL WHEEL 8 THE BOTTOM PANEL BY USING 5 8 FLAT HEAD SCREW i FIRST 8 14 45 INSTALL THE WOOD DOWEL AND THE CAM LOCK BOLT INTO THE BOTTOM PANEL e JOIN THE BOTTOM PANEL E TO THE ASSEMBLED PART BY USING WOOD DOWEL a FIRST e TIGHTEN THE CAM LOCK BOLT b WITH THE CAM LOCK c FROM PRE DRILLED HOLES COVER THE CAM HOLES WITH LONG PLAST
3. IC COVER 9 INSTALL THE WOOD DOWEL AND THE CAM LOCK BOLT INTO THE TOP PANEL e JOIN THE TOP PANEL A TO THE ASSEMBLED PART BY USING WOOD DOWEL a FIRST e TIGHTEN THE CAM LOCK BOLT b WITH THE CAM LOCK c FROM PRE DRILLED HOLES 10 14 TIGHTEN THE BACK PANEL TO THE ASSEMBLED PART BY USING THE 5 8 ROUND HEAD SCREW 9 11 14 INSTALL THE WOOD DOWEL AND THE LOCK BOLT b INTO THE DRAWER FRONT PANEL e JOIN THE DRAWER LEFT SIDE PANEL H AND THE DRAWER RIGHT SIDE PANEL 1 TO THE DRAWER FRONT PANEL e ONCE JOINED TIGHTEN CAM LOCK c ONTO THE CAM LOCK BOLT b USING PRE DRILLED HOLES e COVER CAM HOLES WITH THE SHORT PLASTIC COVER f e SLIDE THE DRAWER BOTTOM PANEL K INTO THE GROOVES ON THE DRAWER LEFT SIDE PANEL AND THE DRAWER RIGHT SIDE PANEL 1 12 14 JOIN THE DRAWER BACK PANEL J TO THE ASSEMBLED DRAWER PART AND TIGHTEN THE DRAWER BACK PANEL J BY USING THE 1 FLAT HEAD SCREW h THROUGH PRE DRILLED HOLES ON DRAWER SIDE PANELS 13 14 14 14
Download Pdf Manuals
Related Search