Rod Desyne 5704-486D Installation Guide
Contents
1. INSTALLATION INSTRUCTIONS FOR ROD SET NOTE Finial shown is for illustration purpose only It may not represent the style of finial purchased Place brackets against wall at desired locations l If screws are going directly into wood trim or wall stubs drill a 1 8 pilot hole at Mark screw holes with pencil Be sure marks are level across opening pencil marks If screwing into drywall follow drywall anchor instruction in the bottom of the page pom y we Disten Assemble rod and sheer drapery treatment onto rod Screw finials onto rod Rotate finial on rod for proper alignment if required gt prapely Extend rod to desired width Lift rod with drapery and drop into brackets Lock rods into position by tightening leveling screw by hand Adjust draperies to desired position until finger tight this will prevent the rod from moving If screws are going directly into wood trim or wall studs drill 1 8 8mm holes and install screws through bracket If screws are going into hollow wall drill 3 16 6mm holes and push or lightly hammer plastic anchors into holes Then install screws through brackets Do not tighten screws too much just snug is best DRYWALL ANCHOR INSTALLATION
Download Pdf Manuals
Related Search