Home Decorators Collection 0816300210 Instructions / Assembly
Contents
1. insert one 1 5 volt AA battery Alkaline Battery are recommended in battery compartment Be sure that the positive and negative terminals correctly match with the symbols on the battery compartment The battery should be replaced every year Set hands to correct time by rotating the hand set knob on the rear of the movement WEATHER STATION A Manually Thermometer amp Hygrometer During shipment the temperature humidity mechanism on your thermometer hygrometer may become slightly misaligned resulting in inaccurate temperature humidity readings To correct this problem you will need to re calibrate your therrnometer hygrometer Steps to do this are as follows 1 Take thermometer hygrometer to an area in your home near a wall thermostat or other temperature measuring device humidity meter that has an accurate temperature humidity reading 2 Rotate the black temperature humidity mechanism located on the back of your temperature hygrometer left or right so that the thermometer hygrometer hand is positioned over the degree mark that matches your measuring device 3 You will now be ready for years of carefree accurate temperature humidity readings from your Thermometer Hygrometer B By Screw driver Thermometer Thermometers are operated by sensitive mechanisms that respond to air temperature changes Each mechanism has been adjusted after manufacture and will accurately read room temperature if properly2. located Place the thermometer in area where known temperature can be determined for 90 minutes In case the reading does not agree make necessary adjustment using a screw driver through the adjustment slot at the back of the instrument Humidity Meter Hygrometer These instruments register the percentage of water vapor which is actually present in the room compared with the maximum amount of water vapor that could be present Humidity meters respond slowly and when conditions are abruptly changed it can take an hour or more for the humidity meter to reach an accurate reading To ensure durable operation of the instrument it should be adjusted regularly at least once every 2 years This should be done as follows wrap the Instrument in a moist piece of linen or cloth for one hour The pointer should then indicate 94 to 96 If this is not the case you should adjust the setting using the Screw driver and turn the adjustment slot at the back of the instrument Remarks T 4 Please avoid placing the instrument exposed to direct sunlight for extended period ue of time as this will affect the functionality and the outlook of Your new time piece Printed in China
Download Pdf Manuals
Related Search