Homeward Bath HW205930L Instructions / Assembly
Contents
1. Bathtub 0001 8 Tub skirt pre mounted 01 9 1574135 4 10 5148000002 01 11 58410 00002 12 DoorCap 2 13 6mm Plastic sveli 4 12 eS Decor cap 22 Omm Plastic swell m particle HINGE ASSEMBLY 5 Page Rev 10 2013 1 Walls and floor must be clear of any debris Note Tub 3 Place the tub in its final resting place adjust all the comes with 90 degree drain make sure your drain legs to be touching the floor Level the tub in place location will work with the drain 2 Remove the skirt off the tub for easy access 4 With the level check the outside of the tub to be leveled Adjust the feet for leveling 6 Page Rev 10 2013 5 Fix the bathtub tighten the screw nut 7 Remove the fixed glass panel and drill the marked holes 8 Lay flat the fixed glass and the door Use the hinge 6 Install the fixed glass onto the tub and into the assembly to attach the both glass panels together aluminum wall mount Use level to mark all hole locations 7 Page Rev 10 2013 9 Install the door assembly unto the tub and inside the 11 Install the locking mechanism wall mount The bracket should be installed in the middle of the wall Note Mark the position of the shower head so the bracket does not interfere 8 Page Rev 10 2013 13 Water test After installation the tub has to be checked for leaks Close and lock the glass door Fill the tub to the overflow control If the tub has2. Installation Manual HW205930 1 Page Rev 10 2013 Table of Contents Diagrams Notice to Installers Tools Needed for Installation Packing List Hinge Assembly Installation amp Assembly GM UT UT K C 2 Page Rev 10 2013 DIAGRAMS Left Hand Tub Right Hand Tub ul Sh 39 in 15 Ve in ul 8 1 0 30 1 8 in 121 16 in 121 16 in 59 3 16 in 59 3 16 in 28718 in 28718 in u hi 9316 in 18 13 16 in 8 1316 in 93 16 in il i Left Hand Tub Right Hand Tub EJ E an e 8 o 2 A F o e Jin C Vain in 2 EM 593 16in 3 Page Rev 10 2013 NOTICE TO INSTALLERS THE FLEXIBLE DRAIN HOSE THAT IS INCLUDED WITH THIS UNIT IS FOR INSTALLATION INTO AN OPEN FLOOR DRAIN ONLY SUBSTITUTING THE EXISTING DRAIN SHOE FOR A DIFFERENT ONE WILL NOT VOID THE WARRANTY AS LONG AS THERE NO DAMAGE OR EVIDENCE OF MISUSE TO THE BASE Note Tub needs to be leveled in its final resting position mark the placement and then level It is advised to have tub onsite before preparing drain location Make sure the floor can withhold the weight of the product Manufacturer reserves the right to change specs or features at anytime Please check to confirm details 1 866 783 2661 TOOLS NEEDED FOR INSTALLATION 4 Page Rev 10 2013 PACKING LIST NO Description Qy 1 Wall Bracket I 2 Hinge 62522 4 Fixed Glass l 5 DoorLock 6001 6 Hanging Glass Door 01 7
3. water leak at the door adjust the location of the wall bracket 1 to right or left By doing so the lowest part of the glass door will get closer to the tub Lightly push the on the bottom of the glass door 2 to see if there is a gap between the tub at the door gasket If there is still a gap adjust the bracket location again Once there is no gap tighten the bracket 1 into place test for leaks again For any technical guestions please contact the manufacturer at 1 866 783 2661 9 Page Rev 10 2013 10 Page Rev 10 2013
Download Pdf Manuals
Related Search