KOHLER K-7305-K-CP Installation Guide
Contents
1. INSTALLATION GOOSENECK LAVATORY FAUCETS THEBOLDLOOK OF KOHLER 117122 2 AA RECOMMENDED TOOLS AND MATERIALS J B Thread Sealant Plumbers Puttv d FA Screwdriver BEFORE YOU BEGIN e Shut off the main water supply e Observe local plumbing codes e If possible install faucet before installing the sink lt lt 14 Adjustable Wrench AP Strap Hex Wrench Wrench e Inspect the supply tubing for damage Replace as necessary e Kohler Co reserves the right to make revisions in the design of faucets without notice as specified in the Price Book FAUCET INSTALLATION Apply a bead of plumbers putty to the underside of the faucet body Insert the faucet body through the lavatory Make sure the sleeve is towards the back of the lavatory Slide the dish washers over the shanks and secure with the locknuts 117122 2 AA Faucet Body ui ud 8 Applv Plumbers AE Putty S Dished Washer Locknut 2 Kohler Co Kohler WI 2 SPOUT INSTALLATION Apply thread sealant to the threads of the spout Apply Thread Install spout to faucet body Usea Sealant clean strap wrench to tighten if ai necessary l IF THE SINK IS NOT INSTALLED INSTALL IT AT THIS TIME BE SURE TO FOLLOW ALL INSTRUCTIONS PACKED WITH THE SINK HANDLE INSTALLATION IF YOUR FAUCET DOES NOT COME WITH PRE INSTALLED HANDLES Install handles at this time according to the instru2. Co Kohler WI 1999 Kohler Co 117122 2 AA
3. ctions packed with the handles IF YOUR HANDLES COME PRE INSTALLED Determine which handle cap you would like to install If installing the chrome caps secure the handles with the round head screws and then press the chrome cap into place 7 80 ZL ag If installing the colored caps press the caps into the appropriate handles red in the dui HOT handle and blue in the Spline Adapter COLD handle and secure in 3 place with the sockethead screws Kohler Co Kohler WI 3 117122 2 AA 4 SUPPLY INSTALLATION Identify your supply connection type Connect the supply tubes to the faucet inlets and supply stops Left is hot right is cold Tighten all connections oe Compression HOT COLD 5 INSTALLATION CHECKOUT Install strainer bodies tailpieces and P traps as needed Ensure that all connections are tight Turn on the main water supplv and check for leaks Remove the aerator Open both hot and cold valves and run water through the spout to remove any debris Turn the valves off Reinstall the aerator Aerator CALL US FOR HELP Questions Problems First review the installation instructions to ensure correct installation For additional assistance in the USA call our Customer Service Department for direct help You may also contact us at our web site listed below 1 800 4 KOHLER THEBOLDLOCK OF KOHLER www kohlerco com Kohler
Download Pdf Manuals
Related Search