none Installation Guide
Contents
1. SWANSTONE CORNER SOAP DISH Model SS 7211 Installation Care and Cleaning Included In Carton A One Corner Soap Dish B One Tube of Caulk C One Tube of Adhesive Surface Preparation Surface must be dry smooth and free of any dirt seap scum or other contaminants Wipe surface with a damp cloth Cleaning Use normal household detergents and cleansers Just wiping the wall surfaces quickly removes water marks and residues Occasional scrubbing with household abrasive cleansers en sures that the original luster is maintained similar to tile and other permanent type bath fixture materials 1 Select which corner you wish to locate your corner soap dish For purposes of con venience the manufacturer recommends you lacate the corner soap dish in the corner nearest the shower head Measure up from the ledge of the shower floor 48 to 52 and make a mark on the wall in the desired corner This is a recommended location of the bottom of the corner soap dish 2 Apply a 1 8 bead of adhe sive supplied as illus trated Keep adhesive at least 1 away from factory applied pressure sensitive tape 48 to 52 3 Remove backing from factory applied pressure sensitive tape NOTE The back side of the corner soap dish is marked THIS END UP Properly position and locate Press into place for a firm fit Read caulking instructions on the back of eh t2. ube of the caulk Complete installation by caulking aroung all edges of the corner soap dish NOTE Caulking applies white and dries clear within 48 hours NOTE The weight of the cor ner soap dish may cause the corner soap dish to sag or slip down the shower panel To prevent this cut a length of board to support the corner soap dish until the adhesive has time to set up approximately 4 hours peee a ooa a U OO a a
Download Pdf Manuals
Related Search