Home Decorators Collection 26660 Troubleshooting Guide
Contents
1. Troubleshooting Problem Solution o The fan will not start The fan is noisy The fan wobbles Check the main and branch circuit fuses or breakers Check the line wire connections to the fan and switch wire connections in the switch housing Check the battery in the remote control Ensure you are in the normal range of 10 20 feet Remember to turn off the power supply before checking the dip switch settings Ensure all motor housing screws are snug Ensure the screws that attach the fan blade bracket to the motor hub are tight Ensure the wire nut connections are not rattling against each other or the interior wall of the switch housing Allow a 24 hour breaking in period Most noises associated with a new fan disappear during this time If you are using the Ceiling Fan light kit ensure the screws securing the glassware are tight Check that the light bulbs are also secure Ensure the canopy is a short distance from the ceiling It should not touch the ceiling Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box Check that all blade and blade arm screws are secure Most fan wobble problems are caused when blade levels are unequal Check this level by selecting a point on the ceiling above the tip of one of the blades Measure from a point on the center of the blade to the po2. int on the ceiling Rotate the fan until the next blade is positioned for measurement and measure from the same point on each blade to the ceiling Repeat for each blade Any measurement deviation should be within 1 8 in Run the fan for ten minutes If the fan continues to wobble please contact Home Decorators Collection Customer Service and a balancing kit will be sent to you at no charge The fan is humming The wall switch is defective and NOT turning The light kit installed and fan come on together For outdoor use Use the pull chain supplied with the light kit to turn the light on and off Call a licensed electrician and install new wiring with 4 wires in your house and after the installation use double switch or a wall control with a separate control for the light
Download Pdf Manuals
Related Search