Home Decorators Collection 0507130220 Instructions / Assembly
Contents
1. Possible Cause Corrective Action Loosen the compression nut D and GENTLY Cord has stretched out pull down on the cord to flex the spring arm B then slide the canopy C back up and re tighten Canopy does not fit tight against the ceiling Bulb is burned out Replace light bulb not included Power is off Make sure power supply is on Bad switch Test or replace switch Bulb will not light WARRANTY The manufacturer warrants against defects in materials and workmanship for one 1 year from the date of purchase to the original purchaser If within this period the product is found to be defective take a copy of the bill of sale as a proof of purchase and the product in its original packaging to the place of purchase This warranty does not cover products becoming damaged or defective caused by abuse misuse accidents faulty installation improper handling and or maintenance or repairs not carried out by the manufacturer Items which are not covered by warranty are those considered as parts which are prone to failure due to general wear and tear for example lamps fuses glass materials There will be no obligations or liability on the part of the manufacturer for consequential damages arising from the use of the product or any indirect damages with respect to loss of property revenue or costs for removal installation or re installation As some states do not allow exclusions of limitations on an implied warranty the above exclusions2. and limitations may not apply This warranty gives you specific rights and you may also have other rights which may vary from state to state www WorthHP com U S Patent No 7 311 425 Printed in China
3. HOME DECORATORS COLLECTION Instant Pendant Light Recessed Light Conversion Kit Assembly Instructions HDC 0507120220 MFG PBN 0905 0030 Please read over the instructions it will be a time saver in the long run PACKAGE CONTENTS Co onmessonner 1 Te a ft TF sconces ft o tampon ft Style and finish will vary by item Bulb not included Questions problems missing parts Before returning to your retailer call our customer service department at 1 866 384 9400 9 a m 5 p m EST Monday Friday Include e mail address if applicable C clh US LISTED Intertek PREPARATION Before beginning assembly of product make sure all parts are present Compare parts with package contents list and diagram above If any part is missing or damaged do not attempt to assemble the product Contact customer service for replacement parts Estimated Assembly Time 10 15 minutes Helpful Tools ASSEMBLY INSTRUCTIONS 1 Adjust excess cord by wrapping it around spindle bracket B just below the socket adapter A Position the last wrap so the cord will hang in the center of your recessed light fixture Recessed light socket 2 Screw the adapter A into the light bulb socket in your gee nee recessed light fixture 3 After finger loosening the compression nut D by turning it counter clockwise slide the canopy C up the cord and against the ceiling 4 To hold the canopy in place against the ceil
4. ing finger tighten the compression nut D by turning it clockwise A CAUTION Do not over tighten the compression nut D HELPFUL HINT If the canopy does not sit tight against the ceiling loosen the compression nut D GENTLY pull down on the cord to flex the spring arm B then slide the canopy C back up and re tighten 5 Attach glass shade F to the lamp cup G add spacer ring H if necessary and then screw on the socket ring E clockwise until tight Spacer ring H is only needed if glass shade F is loose when using just the socket ring E Bulb notincluded Fig 5 A CAUTION Do not over tighten as it may result in breaking the glass shade CARE AND MAINTENANCE Shut off light and let bulb and glass shade cool if necessary Wipe glass shade with soft cloth or household glass cleaner Do not use abrasive cleaners For replacement bulbs use 75 watt maximum Type A or Suitable medium base bulb not included including CFL bulbs A WARNINGS AND CAUTIONS WARNING e Risk of fire or electrical shock Do not alter relocate or remove wiring lampholders ballasts or any other electrical component Risk of fire or electrical shock Install this kit only in the luminaries that have the construction features and dimensions shown in the photographs and or drawings CAUTION e Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation TROUBLESHOOTING
Download Pdf Manuals
Related Search